Audio not recording properly doing voice-overs CS5

I'm in Premiere Pro CS5, the Audio Mixer window.
I'm using an external Go Mic to record a voice-over audio track. It is hit or miss... one time it records audio properly ... then I clear that track and record again and the audio is blank. I notice in these instances that in the Project window the "speaker icon" isn't next to the audio track... instead there is a square white icon with "recycle arrows" instead.
Anyone encounter this? Suggestions?
Update: I found that if i close Premiere Pro and open it again the audio file is there and its complete... ideas as to what causes this???

Hello,
I’m trying to have the artist hear the beat and
sing over it without hearing their own vocals while
recording.
Try muting the track that you are recording onto I think.
B. I also would like to setup headphone capabilities
for my artist and myself while doing live recording.
Does your sound card have a headphone output? If it does connect a female single to double jac adapter so you can attach 2 pairs of headphones.

Similar Messages

Optical drive does not record properly - does not mount discs

My mac pro dual core xeon has two optiarc ad7170a drives that worked perfectly until I updated to system 10.6.2. Now they don't always mount cd and dvd discs and fail to record properly. Does anyone know of firmware updates for these drives.

Multiple posting continued -
I have a Mac Pro Core quad Xenon with two optical drives that came installed with Snow Leopard and I have never been able to burn DL DVDs. I have a 50% success rate with single layer DVDs and this system burns bargain basement CDs Ok. The information now indicates that Apple may have problems with defective software and defective hardware. I have scheduled to take my computer to the Genius group next Saturday 15, 2010. I will keep this group posted.

I have a macbook pro and Premiere Pro 5.0...I'm trying to open audio channels to do a voice over.

I have a macbook pro and Premiere Pro 5.0...I'm trying to open audio channels to do a voice over. Every time I try to record it says I don't have a open channel.

Is there some reason you have not updated PPro 5.0 to the latest version?
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/
More hardware information might let someone answer your question... such as brand/model microphone
-Information FAQ http://forums.adobe.com/message/4200840
-Effective questions http://forums.adobe.com/thread/416679
-How to get help quickly http://forums.adobe.com/thread/419406

External recording indication for voice over recording

hi,
i'm wondering if there is any way to get recording indication for voice over recording out of final cut pro or soundtrack pro. i need to get the 'on air' signalization to the speaker room which is not the same as editing room.
i'm looking for something like
http://www.punchlight.com/?q=node/10
which i'm used to use with protools. does anybody have any idea?
thanks for help

How about a switch you throw to turn on a recording light in the booth? I think less tech here is likely better.
Jerry

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Audio not recording using built-in i-sight camera.

Hey!
I'm trying to record a few clips using my built-in camera. However, the audio is not recording!
It does record a voice-over and my settings in System Preferences are as follows:
[img]http://www.mediamichiel.nl/meuk/audio.png[/img]
Any help would be greatly appreciated!

I'm assuming you are running iMovie '09 with the latest software updates, right?
If so, give this a try:
_ Disconnect all USB and FireWire devices, except for the keyboard and mouse.
_ Shut down your computer
_ Turn it on again and immediately hold down the Command-Option-P-R keys.
(When you hear the startup sound for the second time, release the keys.)
Then launch iMovie '09 and try to record a video using the Built-in iSight.

My system will not let me in Voice over is on

I hit the voice over button in my settings and now I cant get my Ipad 2 to unlock shut down or profrom any other opperation.
It does not noitce any of my screen commands nor does it doa anything I tell it to do...the voice that speaks to me from my Ipad is fast paced....
What can I do how to I get my IPad back to normal?
How can I get back into my IPad?
Thank you
For all your help

Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.

Flash CS3 Animation and Audio not timed properly when packaged.

I am trying to create a simulation with audio, mouse movement, mouse clicks and screen changes. When I play the movie in Flash, the animation and the audio are timed properly. However, when I package it, the animation falls behind the audio. I am using wavs for the audio - I've tried mp3s also.
I have a screen displayed with a mouse. The audio and a highlight indicate the next step, then the mouse moves and clicks the desired area - with a audio mouse click. The first "click" sound is pretty close to where it is supposed to be, but as the movie plays, it begins to occur earlier and earlier. So much so, that the audio starts to begin prior to animation is complete later in the move. This is not a real long demonstration, only about 1100 frames, but I notice the problem around frame 180.
Any suggestions?

IE stinks. There's a huge performance difference when playing
SWFs in
Firefox and IE. We have seen SWFs reach 100fps in FF 3.0
while the same SWF
taps out at around 40fps in the latest IE browser. It's not
Flash, it is the
browser.
Adobe Certified Expert
www.keyframer.com
www.mudbubble.com
(if you want to email me, don't look)
"AMK4" <[email protected]> wrote in message
news:gfk9ls$6kf$[email protected]..
> This has me baffled to no end. I have a flash file
that's behaving rather
> odd.
> Even the original author doesn't have an answer. I work
on a WinXP system,
> if
> that matters. When I test the movie within Flash CS3, it
works as
> expected: the
> animations ends as the audio fades out. When I publish
it, and I open it
> up in
> Firefox, it works as expected. But that's where it ends.
On the same
> machine,
> if I view it in Internet Explorer, the animation takes
longer - it plays
> slower. Consequently the audio ends before the animation
is done.
>
> I've tried multiple WinXP machines, they all do the same
thing. In Firefox
> it
> works as expected and the same way as previewed within
Flash CS3. But,
> viewing
> it in IE, and the animation plays longer.
>
> Wanna see it for yourself? Look at the original author's
page:
>
http://www.flashmo.com/preview/flashmo_137_intro/
>
> Open it up in IE and Firefox, side by side if you can.
Does it play
> correctly
> in both (animation ends as the music fades) ?
>
> Suggestions anyone?
>

MSI 865PE NEO FISR2 Audio not working properly

The audio on my board is not working properly. I have it set for 6 channel and am using Creative Labs Inspire 5.1 Speakers that have 3 inputs that match the 3 output jacks on the mobo. However, its just not right. It is sending anything to all 5.1 speakers and also to the proper speaker at same time. So every sound is coming through all speakers and it a tad louder on the speaker it should be coming out on. Anyone else have any clue as to what setting I can change to correct this or is this something wrong with the cmedia drivers?

The answer to all your suggestions is yes, already did it and in the demo app the sounds work fine. Its just so odd, I may just go to Circuit City tomorrow and buy another set of speakers and see if it is possibly them that are causing the issue. Then if so, I'll just return the Creative Labs ones as I just bought them 2 weeks ago and CC has great return policy
Actually, one of your questions I did not either understand what you meant or did not see the option Quote
Did you enable the output port correctly - LR to LR, surround to surround, center/lfe to center/lfe
The only thing I see is setting phones, 2, 4 or 6 channel in the cmedia control panel and then I plugged in the proper cables.

DVR not recording properly after upgrade

After the DVR software upgrade, my DVR is now missing shows or recording both the HD and SD version of shows. It's possible it's missing shows because it can't record two shows at once because it's busy recording both HD and SD versions of the same show. There are lots of complaints on the new color scheme which I agree with, but could get used to. But if the DVR isn't going to record properly, what use is it? How do I fix this?

I'm seeing the same thing. DVR tried to record 2 SD and 1 HD broadcast of series set to All Channels, All Types, Any Time, First-Run Only. Old software only recorded HD and was smart enough to not record the concurrent SD broadcast. This is clearly a bug and the resolution is we all need to go change our config to just record the HD type? I got the same rec on twitter just now. There's just not enough people reporting the problem.
Specifics? "Formula One Racing" broadcast 11/8 on channels 90, 590, 1544. Old software only recorded 590. New software recorded 90 and 590, and when I stopped recording 90, it tried to record 1544 (I was watching another channel). Chose Cancel, then 30 seconds later got another conflict warning because it wanted to start recording 90, again. It's just annoying at this point.
BTW, new STB theme is ugly, if you're taking a poll.
*Edit* Just thought of another problem, that I'm pretty sure is happening. When deciding to record all of them, it looks like the sort is ascending channel order. If there's something else being recorded, that means that only the first SD is recorded, not the HD. At least now I understand what happened last week when my show was only recorded in SD.

Pattern file does not function properly in Adobe illustrator CS5

So I learned Adobe Illustrator CS5 (Say 10%). I have these two files which I downloaded from the net. They are patterns files for animals skins.
The first file is named "Animals_skins.ai" and is taken from htthttp://www.adobe.com/uk/web/tips/ill10qtpatt/p:// and can be downloaded from the same page ftp://ftp.adobe.com/pub/adobe/magic/special/illustrator/win/pattern.zip and has 10 Animal Skins patterns. When I
Open the file directly in Adobe Illustrator CS5, I get the contents of the file as well as they are added directly to the "Swatches Panel" on the left. When I hover over the individual boxes/Thumbnails/rectangles in the Swatches Panel with the mouse, I get the titles like "Jagur" or "Tiger" telling me the name of the patterns.
The same is the Case when I load the file using the "Open Swatch Libary" > "Other Libary" and browse to the file and open it. Works perfectly. I can apply the patterns to any shapes and it works like a charm.
The Second file is named "skins.ai" and is taken from http://www.vectoropenstock.com/4416-Animal-Skin-Patterns-vector and can be dowloaded from the same page http://www.vectoropenstock.com/descargar.php?id_vect=4416 and has 35 Skins Patterns. When I
Open the file directly in Adobe Illustartor CS5, I get the contents of the file showing me the patterns. However they are not added to the "Swatches Panel" directly as the first file does. Insted I get some other colors in the swacthes panel and when I hover over the individual boxes/Thumbnails/rectangles in the Swacthes Panel with the mose, I DON'T get the titles.
The same is the case when I load the file using the "Open Swatch Libary" > "Other Libary" and brose to the file and open it. Does not work. I CAN't apply the patterns to any sahpes. Even If I select the patterns from the main windows by clicking, selecting and draging to the swatches panle and add there. When I apply the same to any shape it applies them but it's all messed up and lines appear around the single/individual pattern if the shape to which it is being applied is big enough.
Can't figure it out that why the first file works and the second files does not. I am new to Illustartor (How many times you have heard that?) and any solution would greatly aid me in my learning process. I need the patterns for a logo design.
I have another 3rd file which has Cow Patterns and it behaves exactly the same way as the second file. Opening it shows me the pattern in the main window but it does not get added to the swatches panle either by adding it using the mouse or opening it using the browse libary method.
Thanks in Advance

you have to read the tutorial in the same page you downloaded the swatches from. It tells you exactly how to make the tiles match.
http://www.adobe.com/uk/web/tips/ill10qtpatt/

Audio Instr records but does not play back in Logic Pro 9

Hi all.... recently upgraded from a PPC G5 to an iMac 27"" 2.8 GHz Intel i7 w/4GB mem. was running Logic 7.2,now Pro 9. Here's my prob. After opening an old session in LP9 and recording an audio instrmnt (no prob setting up trk or recording) the trk won't play back. However,I was able to drag the recorded region to another trk (set up w/same audio instrmnt) and it plays.Is there some possibility that when opening a Logic 7.2 session that LP9 sees an audio instrmnr trk as an "audio"trk instead? Since I'm relatively new please excuse any newbie faults. Any help is greatly appreciated.
-Ronnie-

Hi all.... recently upgraded from a PPC G5 to an iMac 27"" 2.8 GHz Intel i7 w/4GB mem. was running Logic 7.2,now Pro 9. Here's my prob. After opening an old session in LP9 and recording an audio instrmnt (no prob setting up trk or recording) the trk won't play back. However,I was able to drag the recorded region to another trk (set up w/same audio instrmnt) and it plays.Is there some possibility that when opening a Logic 7.2 session that LP9 sees an audio instrmnr trk as an "audio"trk instead? Since I'm relatively new please excuse any newbie faults. Any help is greatly appreciated.
-Ronnie-

Voice memos are not recorded properly on my Ipod touch. It records voice memos but I cannot hear them.Please Help.

I record class lectures but for the last couple of days I have been unable to hear the recordings. The sound is practically nonexistent. Perhaps it is a problem with the speakers but I am unable to determine a problem.

When you recored the memo did you get a good signal on the VU meter?
Try using headphone to rule out a speaker problem.

Get thump noise when clicking record button of voice over iMovie 11

Hello,
When I try to record a voiceover in iMovie 11, the record button that I click to record does not load. There is a thump noise every time I click on it. The audio of my microphone is set to not too loud or soft and should work. I also do have a defined timeline as well. I want to record my voice and mute the sound that is already in the timeline. Do you have any suggestions as to what I should do to be able to record my voice in the movie?
I am not sure if my question has already been submitted to one of these online forums, and I apologize if it has. If it has, could you provide me the link?
Thanks,
Adam

The problem was no longer excist after the last iMovie updates.

Record slideshow WITHOUT voice-over?

I want to export my keynote slideshow to QT, and have practiced the slide timing and progressions to align to music. However, when I go to record the slideshow, I get an audio record function (presumably to record your voice with the slides). This causes the music to be doubled, and sound terrible.
How can I record the slideshow to only retain the song that is embedded in the presentation with my click timing, etc. without any other overdub recording?
Thanks for the help!

When you go to export to Quicktime, make sure that you have checked "Include audio (sound file, movie audio)" and do not check "Include the slideshow recording".

Audio not recording properly doing voice-overs CS5

Similar Messages

Maybe you are looking for