Audio/vide​o on PowerPoint not working

Hi,
The audio/video on my PowerPoint is not working.  Other sound is ok.
Windows 7 & Microsoft Office PowerPoint 2007.   Please help, thanks.

Thanks for that link, Linc!
I followed the instructions and one of them worked. Mine was a simple fix, the second item on that list: "Adjust the volume control located in the lower left corner of the YouTube video player."
The volume on the YouTube video player was turned down completely. That's why no YouTube sound was coming out. It's kind of embarrassing because it was so simple to fix. But I swear I didn't set it that way and I've never gone to YouTube and had no sound. Maybe it's a bug on their site? Who knows. But it worked. Thanks for your help.

Similar Messages

  • Why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

    why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

    R Cubss,
    You might want to read down this thread. There are a lot of tips-n-tricks, and maybe one will be right for you.
    http://www.adobeforums.com/webx/.59b6565c/43
    Good luck,
    Hunt

  • Audio in video messages does not work

    When I record a video message for someone, the audio does not work properly. It either doesn't work at all (silence is recorded), or cuts out after a 1-2 seconds. The problem seems to be confined to the MP4 video/audio encoder used by Skype for video messages.
    My webcam (Logitech HD615) works properly when used for Skype calls (including the built in microphone), and when used in other applications. With other applications, I can also record videos and the audio is captured and encoded correctly. Although the problem does not seem to be the webcam, I have re-installled the webcam drivers and I have tried changing USB ports for the webcam.
    I have re-installed the latest version of Skype and verified that Windows has the latest updates (I'm using Windows 7).  I have tried re-booting a number of times when debugging this issue.
    I have looked at the mp4 file that's created in the temp folder when Skype records the message - the audio is missing/broken regardless of what player I use. This, and the fact that the webcam works makes me believe that the problem is in the Skype use of the audio/video encoder, or the encoder itself.
    Any ideas on how to solve this problem?
    Thanks,
    K.
    Solved!
    Go to Solution.

    When you change the USB ports, make sure not to use USB 3.0 ports. I had a very similar issue with Logitech c920 webcam. Changing the port to USB 2.0 has solved the issue.
    http://community.skype.com/t5/Windows-desktop-client/No-sound-on-video-messaging-playback/m-p/274382...

  • Hp Pavilion Dv 9000 no audio, quick lunch soft touch not working and no light indicators

    Good Evening i have problems with my laptop since it was sent to me without a hard disk drive so i have to buy a new one to make it work, first here are some useful information regarding my laptop.
    Hp pavilion dv 9000
    OS: Windows Vista Home premium
    HDD1: 250Gb
    Ram: 1030mb
    so when i got the hard disk drive, i installed windows vista as its operating system and so far it worked well, and after that i downloaded drivers from HP's website, with correct laptop model and os, i searched for the most compatible drivers that will make my laptop function 100%
    i installed
    NVIDIA  Chipset driver
    Hp Quick lunch buttons
    Audio Driver
    so after the installation and reboot of my laptop, it seems that only NVIDIA chipset driver worked, the quick lunch buttons are still not working, and also i cannot hear anything comming out of my speaker when i try to play some music, but i hear some loud beeps so it means it is 100% functioning  and also i noticed the 3 indicators at the bottom lefot of my laptop for (Power,Charging,Reading) lights are not lighting up.
     i tried to uninstall it and install it again just like other blogs says but it doesnt work. . .
    i really want to make my laptop fully functional . . 
    can you help me please

    Hello @iamDestiny ,
    Welcome to the HP Forums!
    I understand you've installed a new HDD in your notebook and are unable to use the keyboard shortcuts and have no sound from programs on the computer.
    It would help to know if you're using a 32 or 64 bit version of Vista. To see which version of Windows you are using click here: Which Windows operating system am I running?
    Keep in mind beeps typically come from the onboard BIOS speaker, not the actual speakers. Can you tell me what you do to hear the beeping so we can tell if this is a system beep or a Windows sound? Also, can you tell me if headphones work?
    Regarding drivers: I would suggest installing the HP Support Assistant (HPSA) to search for drivers for you. You can download this here: HP Support Assistant. You can see how to use it here: Using HP Support Assistant (Windows 7, Windows Vista).
    When you installed Vista did you use the HP recovery CD's or your own copy of Windows? 
    Let me know the updated info or if the HPSA works.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Online audio and video files are not working

    i got a plugin for shockwave flash(adobe flash player) i thought it is the latest version so i downloaded it and installed it. Before installing the new flash player i was able hear song online and can watch videos but now both audio and videos are not working.

    thanx for your advise but i got to hav one more problem and that is...i have downloaded the new version setup of firefox but after extracting it stops working and the installation process ends automatically...so please help.
    the file that i downloaded had the "Firefox Setup Stub 23.0.1"

  • Keyboard: audio and Brightness control keys not working with or without fn

    The Keys for controling Audio and Brightness (F1-F5) do not work.
    Also combined with pressing the "fn" key the keys do not work.
    So i only control audio with the remote control or the slider in the menubar.
    Making a reboot with deleting pram didn't help.
    I'm running the up to date version of leopard on a macbook pro (core2duo).
    I also searched in the forum for this problem.
    I oten read about "sytem control"-"keyboard and mouse"-"keyboard" and the F1, F2, etc. to use as...
    but switching this button on or off doesn't change anything.

    problem solved:
    the couse was the software update 1.1 for macbook pro, because there i had the problem like in this thread: http://discussions.apple.com/thread.jspa?messageID=6142512&#6142512
    and did the solution like that, but there i maybe made some mistakes with renaming and copying, so i rinstalled the update and renamed it a copied to plugins, and now all works as it should.
    thanks for help

  • Export to powerpoint not working for certain views

    Hi All,
    I am in the process of implementation of STVN 2.1 Pre EHP3 version of Nakisa OrgChart for one of my clients.
    During testing, it is observed that export to powerpoint object is not working for the following views.
    1. Condensed Org. Chart
    2. Compressed OrgChart -Only works when we expand at least one position
    3. Horizontal OrgChart - Condensed children-Only works when we expand at least one position
    In all the other views the export to Powerpoint object are working fine.
    Export of powerpoint image is working in all the scenarios. We are facing issue only with powerpoint object.
    I have implemented Export Pack 3.0 for OrgChart.
    J. Thomas

    Hi Luke,
    Thanks for the response.
    Yes...I have installed SP1.0. I have also applied Export Pack 3.0.
    The following features are working fine.
    1) Export to PDF
    2) Export to JPEG
    3) Export to Powerpoint Image.
    Export to Powerpoint Object is also working fine if the style is 'Vertical'. The issue is only in case of 'Condensed', 'Compressed' and 'Horizontal OrgChart - Condensed children' sytles. Here again, if we expand at least one position, the export is working.
    The error message that is flashed for the user is the usual one....pasted below.
    Object Variable or With Blovk Variable Not Set.
    Export To PowerPoint 
    Compatibility 
    We currently support:
    Microsoft PowerPoint 2000 / 2002
    Microsoft PowerPoint 2003
    Note: To ensure compatability, you may be prompted to install "Service Pack 6 for Visual Basic Runtime." If so, you must accept the installation and once installed it may ask for a system reboot which you may ignore. 
    ActiveX Security 
    Depending on your browser settings, you may be prompted to install 'Nakisa Office Components.cab'. This is our ActiveX component that will allow you to use our Exporting functionality.
    You may also be prompted to allow the ActiveX to run. If so, you must select 'Yes' to continue.
    Note: If you are not prompted and the export fails to occur, please verify your Microsoft Office installation and verify your browser's ActiveX settings are set to 'Enable' or 'Prompt'.
    In the log file, the following error message is displayed.
    ERROR: ChartingXMLProcessor : generateLayoutXML : Unexpected XML declaration. The XML declaration must be the first node in the document, and no white space characters are allowed to appear before it. Line 1, position 5081.
    Warm regards,
    J. Thomas

  • Some core audio channels 17-30 will not work.

    I did this project with logic express on my powermac a while ago. Now I'm trying to bring it up on my PowerBook and and track that is set to channel 16-30 will not work. Check out this picture...it's like grayed out.
    http://img222.imageshack.us/img222/79/picture2dgk.png
    Any idea?

    Without even looking at the picture — yes. You have probably restricted the number of Tracks to 16.
    +"If you are using the native engine, you can limit the number of tracks via the+
    Audio > Audio Driver > Max. Number of Audio tracks
    +setting for the individual driver/hardware, thereby limiting the amount of memory and processing power required."+
    You can switch this off (or choose 30 Tracks).

  • Multi Channel Audio Instrument [Kontakt 2]: Auxes not working?

    Hi,
    I've searched the forums and come up with several posts about using multi-channel audio instruments, but none seems to exactly address the issue I'm seeing (and being confused by). I'm trying to set up Native Instruments' Kontact 2 sampler in multi-channel mode in Logic Pro 7. I perform the following steps:
    1. On an available audio instrument object, I click the input drop-down, select Multi Channel -> AU Instruments -> Native Instruments -> Kontakt 2.
    2. When Kontakt 2 opens, I load, say, three different instruments.
    3. In Kontakt 2's Outpus area, I create three outputs, labelled "st. 1", "st. 2", "st. 3". I cable these to "Plugin Output 1" and "Plugin Output 2" for st.1, "Plugin Output 3" and "Plugin Output 4" for st.2, "Plugin Output 5" and "Plugin Output 6" for st.3.
    4. In Kontakt 2, I assign the output of instrument 1 to st. 1, the output of instrument 2 to st. 2 and the output of instrument 3 to st. 3.
    5. Back in Logic Pro, I create two new (stereo) audio objects and assign them to channels Aux 1 and Aux 2 (and name them accordingly).
    6. In my Aux1 object, I select its input drop-down and choose Instrument1 -> Kontakt2 3 & 4.
    7. In my Aux2 object, I select its input drop-down and choose Instrument1 -> Kontakt2 5 & 6.
    Okay, so basically I'm set up now, right? So to test this out, I set the MIDI receive channel of all of my instruments in Kontakt 2 to omni and click on the built-in keyboard in Kontakt 2. I can see the volume level indicators on all three instruments light up. I can also hear all three instruments coming out of my speakers. However, when I look at the environment page where I've created these objects, I find that they're all coming as a stereo sum from the original audio instrument object. The Aux1 and Aux2 objects are just sitting there doing nothing.
    What gives?
    Dual 1GHz PowerMac G4 (Quicksilver)   Mac OS X (10.3.9)   MOTU 828

    Okay, I found the solution to this, and it's odd enough that I figured that I'd post it just in case anyone else ran into it.
    It turns out that the multi-channel thing does not work at all when you play Kontakt 2 from the built-in keyboard (in K2). Visually, K2 still shows all the audio going out on the corresponding channels, etc., but I guess it's summing it and outputting in stereo only when you do that. If you send it data from Logic, it works just fine. So I had this setup correctly all along.

  • Connecting audio clips with Q-key not working

    I cannot properly connect an audio clip to a storyline clip using the Q-key.  It positions the clip at the play head, and it shows a connection to the storyline clip, but when I move the storyline clip the audio clip does not move with it.  If I drag the audio clip to the storyline, it works properly.  And if I connect a video clip using the Q-key everything works properly.  Is there a Gotcha with audio clips and the Q-key that I'm missing?  Or perhaps a known bug?  I couldn't find anything about it.

    Where is the playhead positioned when you hit the Q key? It looks like somehow the playhead is parked at the last frame of the outgoing clip - and if so, then the program is working as it should.
    What happens if you move the playhead one frame to the right using the right arrow key and then hit Q?
    Does it work then?
    Also: do you have skimming turned on? And where is the skimmer? The position of the skimmer takes precedence over the playhead if skimming is on.
    One other thing you might try: press the closing bracket key "]" to select the left edge of the incoming clip.
    If all these fail, then you may need to trash preferences (there are four, not just two, files to trash; it may be easier to use Preference Manager to handle this).

  • Realtek HD Audio: Output:OK, Input (Mic): NOT WORKING??!?!?!?!?!?!?

    Hi guys,
    I am going to tell you and ask for your advice the wierdest thing happens to my 14-month old Pavilion 6300 series:
    - The PC has Realtek HD Audio built-in (on-board) and having the latest driver (I downloaded off from realtek.tw, latest is 5.10.0.5874)
    - Before I installed that Realtek driver, I had installed Microsoft UAA Bus driver for HD Audio (version 5.10.0.5010)
    - I am running Windows XP Professional SP3
    When I plug in a headset (with mic of course, for skype), strange things start like this:
    1. I can hear the output sound, the jack can detect which plug I plug in
    2. But the INPUT (back or front) which is in my case, the MIC, DOES NOT WORK AT ALL.... Jeeze, it drives me NUT!!!
    3. I have turned on ALL the volume related to "MIC" but to no avail. Even the Recording mic volume is grey-out... really no-hope?
    4. I did the Hardware test, it could not detect the mic (no movement from the sound bar)
    5. The headset works well on other machine!!!!
    Can somebody tell me that the onboard card got a problem and I have to buy another card???
    Thanks a lot in advance guys, really
    James
    Message Edited by Jamesnb on 06-26-2009 12:19 PM

    now what you can try is can try to test the MotherBoard once and if there is any issue with the onboard card then you have to replace the card.
    if there is no issues with the MotherBoard then try entering device manager in safemode and uninstall the drivers once and check if its working.

  • HELP! Brightness Keys (F1, F2) & Audio Keys (F10-12) Suddenly Not Working!

    Hello all.
    Just a while ago I was toying inside After Effects CS3 to try and access their own Keyboard Shortcuts instead of the default system's Keyboard Shortcuts (E.G. inside AE, F2 would be deselect all, while in general F2 is Brighter)
    (See this post: http://discussions.apple.com/thread.jspa?threadID=1337330)
    Inside AE preferences there was a check/uncheck 'Use System Shortcut Keys', I checked it and was able to use AE's shortcut keys.
    *Then all of a sudden these common keys lost their functions!! --*
    *Brightness Keys F1 & F2*
    *Audio Keys - F10, F11 and F12!*
    Even when I uncheck or turn off AE's box of 'Use System Shortcut Keys' and quit the application, I even restart the iMac and unplug the keyboard, but the above common keys are still not working!!
    These general keys are more useful and important to me than inside AE's, which I only use once in a blue blue moon.
    *So how do I get these shortcut keys back??? Help please*
    Thanks a lot and cheers!!

    Hi all
    Oh dear another me blunder again... apparently I have checked in the 'Keyboard' tab inside System Preferences "Use all F1, F2, etc. keys as standard function keys..."
    Actually even all through these, I am still a bit confused in setting up all these keyboard shortcuts, or rather, setting the ones I need and I would use... especially with the new keyboard that have some "pre-determined" keys already in place... and seems not able to turn them off...
    Cheers

  • Whiteboard, Polls, Q&A and Powerpoint not working over Federation

    Hi,
    I have a problem with whiteboard, polls, Q&A and Powerpoint sharing over federation, if the federated endpoint is behind a web proxy with HTTPS inspection enabled. Audio, video and desktop sharing works fine.
    Scenario:
    2 Domains which are federated (DomainA and DomainB), all Lync servers are full patched (June 2014)
    2 Users (UserA from DomainA and UserB from DomainB) works with full patched Lync Client 2013. Both Users work on their internal LAN. The client cannot reach the internet directly. Web requests go to through a proxy with HTTPS inspection.
    1. UserA starts a Chat with UserB. UserB accepts.
    2. UserA adds the whiteboard. UserB gets the "Add meeting content" button and accept.
    3. UserA gets the whiteboard, UserB gets a error message "Because of network issues..."
    In this scenario, UserB's Lync client tries to connect to WebConf Edge of DomainA over TCP/443 (HTTPS). Because UserB cannot reach the Internet directly from the inside LAN, the request goes trought the web proxy of DomainB (ProxyB). The web proxy is configured
    with https inspection, so on the WebConfEdge I get requests from the web proxy of DomainB which are also answered by the WebConf Edge. On the pc of UserB I also get the answer, but signed with a certificate of the web proxy which is added as trusted root certificate
    (normal behaviour if https inspection es enabled). On the network trace, as I can see, UserB resets (ACK, RESET) the connection to WebConf Edge directly after receiving the first https response.
    Then I changed the web proxy (ProxyB) to bypass the https inspection for the ip address of the WebConf Edge of DomainA. The same scenario works fine now. It always works fine, if UserB have directly access to web conf edge of Domain A (UserB is in the internet
    and not in the LAN).
    I also could check this vice versa. It depends on which side, the conferencing is hosted. As soon as the other user connects through a web proxy which doesn't bypass the request directly, the user do not get the web conf content.
    Then I tried with other domains and other environments, but all of them had the same issue, as long as the web request from the foreign user goes throug a web proxy. It seems there is no dependency on which product of web proxy will be used, it seems to
    be a dependency on https inspection and all changes the web proxy do in this case with a web request and response.
    I always tested with whiteboard, but the same behaviour is with Q&A and polls and also with Powerpoint (WAC). For Powerpoint it's only because the foreign user do not get the URL from web conf, so the client do not know how to connect to the WAC of DomainA.
    During the tests with several Domains (customers), I see a corrupt "Client Hello" from a specific web proxy. In the list of cipher suites in the "Client Hello", the web proxy added an additional byte (0xFF) at the last TLSCipherSuites
    entry, so the extensions, followed by the ciphersuites list in the "Client Hello" are not readable. So the connection will be reseted directly.
    Because my workaround depends on the web proxy of the foreign side (configure bypass) it's not really a practicable way to make sure, the web conferencing content will work. Is there an other way to solve this issue?
    Regards, Stephan

    Hi,
    From your description, the issue should be the
    https inspection on the web proxy, maybe you should change from the web proxy side.
    You can refer to the link of
    Enabling HTTPS Inspection causes some applications to stop working
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or
    information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Lync and Office 2013 Home and Business 'Present PowerPoint' not working

    Hello All,
    We have an Exchange online E1 plan that includes Lync, that we have been using without problems for the last year or so. 
    The 'Present PowerPoint' functionality of Lync is very useful, and again it has been working without fault until now.  However, for one user who we have upgraded to Office 2013 Home and Business (from Office 2010), it no longer works when she clicks on
    present, select PowerPoint and select a .pptx file. She gets the following error message...
     'the presentatio.ppx couldn't be converted for presentation because Visual Basic for Applications (VBA) is not installed on this computer. Please install VBA and try again.'
    The thing is it seems that Visual Basic for Applications is installed as a part of the Lync Basic Install. I re-installed Lync just in case, and when I clicked customize I ensured that Visual Basic for Applications was checked to install as run from the
    computer.
    In searching online I can see plenty of other people suggesting with Office 2010 to repair the Office install, and select customize and make sure the Visual Basic for Applications is checked to install too.  However, with Office 2013 Home and Business
    you don't get this option - it seems all or nothing.  I have tried repairing both installs, re-installing etc with no luck
    So is it that Office 2013 Home and Business incompatible with Lync or can anyone help or throw some ideas at me?
    Thanks,
    Andrew.
     

    Here a few who also experienced the same issue 
    https://social.technet.microsoft.com/Forums/lync/en-US/3cf4f93e-3e98-4a72-aa6a-83e92408837c/message-error-visual-basic-for-applications-vba-is-not-installed-office-home-business-2013-?forum=ocsclients
    https://social.technet.microsoft.com/Forums/en-US/f336fc74-c821-4473-b9d9-df62267a3180/lync-2013-and-office-web-apps-powerpoint-presentation-sharing-missing-vba?forum=lyncconferencing
    http://community.office365.com/en-us/f/166/t/123920.aspx
    http://answers.microsoft.com/en-us/office/forum/office_365hp-powerpoint/lync-2013-and-office-web-apps-powerpoint/71abcef9-0b6b-4fe1-944e-789b53da3f1e
    The suggestion since there is not direct solution as of today  would be either roll back the office 2010 since we know this work 
    On upgrade to Office 2013 Pro use the full Lync Client 
    PLEASE REMEMBER, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answered"

  • Mac powerpoint not working on pc

    My 11 yr old son created a powerpoint 97-2003 .PPT document on a mac at school and brought it home on his flash drive for Mothers day.  I have a Windows 7 PC with Microsoft Office Standard 2010. 
    Several slides have the message Quick Time and a TIFF (Uncompressed) decompressor are needed to see this picture. 
    I downloaded and installed Quicktime 7.6.9 then rebooted but it has not helped at all.
    Anybody know how I can play this slide show?

    no it should work
    if I were you I'd first get the sharedLib on the mac avaible on the pc
    then I would get the sharedLib on the pc avaible on the mac
    when you managed that the appletv should have no problems
    but for troubleshooting it's easier to keep out of the equetion
    most likely it's a setup issue on your pc with itunes, firewall or the apple services not running correctly

Maybe you are looking for