Audition 2.0 Startup Issues/Frozen at Splash Screen

Had a production worker come to me today noting that 2.0 was not stating up.
It is freezing on the splash screen.
Process shows Adobe at 50% and Sys Idle at 50%.
I can start and run any other program with no issues.
I uninstalled and reinstalled only to return to the same issue.
I also installed Audtion 1.5 and it runs fine.
Has anyone experianced anything similar or does anyone perhaps have an idea where I might start to look in order to resolve this?
It's run problem free for I don't know how long, one year plus.
I did have a NexGen issue today with the sound card, but donot see that as being linked in anyway.
Though I suppose it is curious that both picked today to fail.
Same sound card as before, nothing physical was swapped out, just reinstalled the driver.

Maybe try deleting the presets/preferences (after backing them up)
(usually found at C:\Documents and Settings\[username]\Application Data\Adobe\Audition\2.0

Similar Messages

Z77A-GD65 Multiple BIOS Issues - B4 Hang, Splash Screen Blinking

Back in November 2012, I built a home server with a Z77A-GD65. Lately, I've noticed some strange things happening that I've been trying to research but to no avail.
First off, I get the B4 code hang-up whenever I'm booting. This doesn't matter if it's a cold boot or a reboot, it hangs on B4 for about 10-15 seconds, flashes 92 really quick, and then goes to A2 which it stays for another 5 or so seconds. After that I get the MSI splash screen for about 1 second, then it blinks 5 times. After that it goes into Windows just fine.
The blinking is a new issue, the B4 hang is not. I've read from multiple posts that this is a USB issue. When I disable USB legacy support, the issue goes away, but of course then I can't have legacy support. I have yet to figure out what exact device is causing it. In the process of trying to figure this out, I updated BIOS to A.A0. After updating to this version of BIOS the splash screen blinks 5 times before going to the "Starting Windows" splash screen. This is a more difficult issue to figure out why it's doing this because if you search for "BIOS" and "flash" or "flashes" or "flashing", you typically get results for flashing your BIOS. Hence, why I'm using the term "blinking". But even then I can't really find a solution out there.
I also happened to see that the website for the Z77A-GD65 is showing a newer BIOS version, but I'm unable to flash this (at least using M-Flash). I threw it on a USB, re-enabled USB legacy and whenever I click on it to install, the BIOS screen hard locks. The screen just freezes exactly where it's at in the BIOS and the mouse is dead. However, I can CTRL+ALT+DEL on the keyboard and it will reboot the system so I don't need to power cycle the computer. Not sure why this is happening either. Perhaps I need to flash this a different way? Maybe I don't need to flash this at all?
I could really use some input here on why this is happening.
As for the specs on my system, they're as follows:
i7-3770K overclocked to 4.2 Ghz by using the Turbo Mode in BIOS
32GB Komputerbay DDR3 PC3-12800 1600MHz DIMM with Low Profile Blue Heatspreaders Quad Channel RAM | 9-9-9-24 XMP ready
AMD PowerColor 7870 Myst Edition GPU - currently not overclocked although overclocking this doesn't seem to affect any issues
2 - 128 GB Corsair SATA III SSD - one runs the OS, the other I use to load games from
2 - 500 GB Seagate Barracuda 7200 RPM Sata II HDD's mirrored via Windows 7
1 - 750 GB Seagate Barracude 7200 RPM Sata II HDD
1 - 1 TB Western Digital MyBook USB 2.0 external
2 - 3 TB Seagate USB 3.0 external
ASUS DVD Burner - not sure which one, it's a cheapy $20 from Newegg
1 - PCI USB 3.0 expansion card
Antec TruePower New TP-550 Modular 550W Continuous Power ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS BRONZE Certified Active PFC "compatible with Core i7/Core i5" Power Supply
NZXT Switch 810 gunmetal - currently have 4 fans running but plan on more, also the Switch 810 has the multi-card reader in the front with 1x SD Card, 2x USB 2.0, 2x USB 3.0
for peripherals
1 - Microsoft 360 Wireless controller adapter (legit one, not the knockoff although I had a knockoff prior to getting the real deal)
1 - Logitech Wireless USB Keyboard with Touchpad
I tried to be thorough. Thanks in advance for any help!

Quote from: PirateDog on 26-August-13, 12:45:18
Probably a USB device problem.
This is a candidate, as well as mouse and keyboard. Disconnect USB devices one at a time to find the culprit.
A lot of devices running. PSU a +12V single rail or is it multi rail? A rail going to the graphics or components may not be enough amps. My best guess is the card reader.
For UEFI/BIOS flashing, select your mainboard here and use the forum flash method;
I'll definitely try unplugging some of these USB devices to see if that helps with the B4 hang issue.
As for the PSU, according to the description for it on Newegg: "Four industry-leading independent +12v rails are provided for more stable and safer power output." It has two rails going to the GPU. The GPU is a new addition to the system and so I wasn't running it until recently. The issues were occurring beforehand, but you're right that this PSU is underpowered for the rig considering PowerColor recommends a minimum of 500w. I'm going to be buying a larger capacity one sometime in the very near future. Any recommendations on good modular PSU's? What's a good way to tell what wattage to get?
Thanks for letting me know about the forum flash method. I'll be back later when I have some results.

Splash Screen Embed issue

hi
building app using Flex 4.6 with AIR 3.2 for iOS, i came across an issue with the Splash Screen on main application that on applying it and push the first view which loads an external swf having *Embedded images , the access Class for these Embedded images comes with an Error Type #1007 but on removing (do not apply) the Splash Screen from main application , the same code for Embedded Class runs fine.
am not understanding the connection between External Swf Embedded images and the splash screen. any help regaring the issue would be highly appreciated.
For reference:
Embedded Code in external swf file as follow:-
package
    import flash.display.Sprite;
import flashx.textLayout.compose.ISWFContext;
public class Slide1 extends Sprite implements ISWFContext
        [Embed("slide1/sldBg1.png", mimeType="image/png")]--------- the *Embedded image
        public static const bg:Class;
        [Embed("slide1/9_SmileyFace8.png", mimeType="image/png")] -------- the *Embedded image
        public static const pic96:Class;
        [Embed("slide1/slide1.xml", mimeType="application/octet-stream")]
        public static const slide:Class;
        public function callInContext(fn:Function, thisArg:Object, argsArray:Array, returns:Boolean=true):*{
             if (returns)
                     return fn.apply(thisArg, argsArray);
             fn.apply(thisArg, argsArray);
App xml:

        <visible>true</visible>
<aspectRatio>landscape</aspectRatio>
<autoOrients>true</autoOrients>
<fullScreen>true</fullScreen>
<renderMode>auto</renderMode>
<softKeyboardBehavior>pan</softKeyboardBehavior>
thanks in advance.

I absolutely position my other elements based on the location of the logo and the size of the logo and elements. I don't use any stackpanels or grids at all. I just use Canvas.LeftProperty and Canvas.RightProperty.
void PositionImage()
this.MySplashImage.SetValue(Canvas.LeftProperty, MySplashScreen.ImageLocation.Left);
this.MySplashImage.SetValue(Canvas.TopProperty, MySplashScreen.ImageLocation.Top);
this.MySplashImage.Height = MySplashScreen.ImageLocation.Height;
this.MySplashImage.Width = MySplashScreen.ImageLocation.Width;
this.MyProgressRing.Height = MySplashScreen.ImageLocation.Height / 6;
this.MyProgressRing.Width = MyProgressRing.Height;
this.MyProgressRing.SetValue(Canvas.LeftProperty, MySplashScreen.ImageLocation.Left + (MySplashScreen.ImageLocation.Width / 2));
this.MyProgressRing.SetValue(Canvas.TopProperty, MySplashScreen.ImageLocation.Top + MySplashScreen.ImageLocation.Height - (.26 * MySplashScreen.ImageLocation.Height));
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Extended Splash Screen Layout Issue

I'm not sure, actually, whether this is an issue with extended splash screens or the Canvas element, but...
I've built a minimal extended splash screen that displays the SplashScreen image, a progress bar and a button. The ProgressBar and Button are wrapped in a StackPanel.
The PositionImage() method is working fine with screen resize--the logo always displays in the center of the screen. The problem that I have is positioning the other elements.
I'd like them to display just a bit below the SplashScreen image. Following the MS code sample, I can create two rows in the layout Grid and set a fixed size on the row containing the StackPanel, but that always displays those items the specified row size
from the bottom of the page. Way too low in portrait view.
I tried setting the first row (containing the Canvas) to "Auto", but that causes the StackPanel in the second row to display at the top of the screen. (Does Canvas not report its size?) I tried replacing the layout grid with a stackpanel, with
even worse results. Specifying height values for the Canvas doesn't work, either.
Any other ideas out there?
Rebecca M. Riordan

I absolutely position my other elements based on the location of the logo and the size of the logo and elements. I don't use any stackpanels or grids at all. I just use Canvas.LeftProperty and Canvas.RightProperty.
void PositionImage()
this.MySplashImage.SetValue(Canvas.LeftProperty, MySplashScreen.ImageLocation.Left);
this.MySplashImage.SetValue(Canvas.TopProperty, MySplashScreen.ImageLocation.Top);
this.MySplashImage.Height = MySplashScreen.ImageLocation.Height;
this.MySplashImage.Width = MySplashScreen.ImageLocation.Width;
this.MyProgressRing.Height = MySplashScreen.ImageLocation.Height / 6;
this.MyProgressRing.Width = MyProgressRing.Height;
this.MyProgressRing.SetValue(Canvas.LeftProperty, MySplashScreen.ImageLocation.Left + (MySplashScreen.ImageLocation.Width / 2));
this.MyProgressRing.SetValue(Canvas.TopProperty, MySplashScreen.ImageLocation.Top + MySplashScreen.ImageLocation.Height - (.26 * MySplashScreen.ImageLocation.Height));
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Splash screen behavior

I'm unclear on the behavior of the "splash" screen in a custom viewer. I understand that for a single issue app, the splash screen image appears every time that you run the app, regardless of where you left off reading the app last.
But for multi-issue apps, te splash screen seems to "come and go". I've noticed that it appears the first time that you run the app, and then once in a blue moon after that. But it doesn't appear each time you actually read an issue within the app.
Can anyone tell me what the behavior of the splash screen is supposed to be for a multi-issue app?
What I really want is the ability to have a splash screen image that ALWAYS appears when you enter any issue in a multi issue app. In other words, I want the reader to see our corporate branding every time they read or re-read each issue of a multi-issue app.
Second question: is it on the future roadmap to allow animation or video in this "splash" screen image?

The splash screen appears for 2 or 3 seconds whenever the app needs to be loaded. If the app is stored in the device's memory, the splash screen doesn't appear. On the iPad, you can get double-tap the Home button to display the app tray and then remove the app from the tray (tap and hold, delete). When you start the app again, the splash screen appears. I'm not aware of a way to get the splash screen to appear even if the app is loaded into the device's memory.

Splash Screen Landscape

Does anyone know how to fix the splash screen issue of the splash screen quickly shifting to the right and then back in place ?
I thought this would be fixed in 3.3

Can you provide details about the following :
1) The device you are using
2) Images you are packaging
3) If your app is full-screen or not
4) The launch orientation i.e. Portrait or Landscape

BLACK SCREEN startup with 3 beeps, FREEZES when unplugged, Splash screen freeze, HEAT-UP TO BOOT

BLACK SCREEN startup with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-powe
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears, and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling, so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B. I ended up changing a setting in BIOS from AHCI to Compatibility Mode, and I passed everything without the BSOD again. I have always had it on AHCI.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
BIOS:
Also, the time was set to 1988 or something in the BIOS.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the driver wasnt made for the system, or that it wasnt compatible or something, which was wrong. I made it work somehow, but it was still sluggish after install. I rolled it back to an earlier driver, and now it works fine oddly. No sluggish performance / slight freeze window thing going on. No problem at all.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1

T61-Elwood wrote:
Laptops of all Brands using Nvidia GPUsmade from 2007-2008 are faulty.
You wont get good Nvidia ones on Ebay/forumes anywhere.
I'd beg to differ on both accounts.
*61 series nVidia-based ThinkPads from late January through July of 2008 are a 50/50 shot, since the old chips were mixed with the new ones. Any machine built in August and later can be deemed "safe".
As for the forums (I don't do feebay) there are people who sell genuine, properly-tested planars. However, these do not come at bargain basement prices, and with a good reason if I may add.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses). I did a completely fresh install of Windows 7 Ultimate 64-bit. I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
Google searches aren't turning up anything. When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears. However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar. I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there. I tried uninstalling and reinstalling. I tried upgrading to CS3 10.0.1. Nothing works. The application simply freezes before it gets anywhere.
I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today. Go figure.
Edit: I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects(). The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function). There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

Log Name:      Application
Source:        Application Hang
Date:          7/17/2010 6:16:25 PM
Event ID:      1002
Task Category: (101)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: d0c
Start Time: 01cb2616be79e36f
Termination Time: 2
Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Hang" />
    <EventID Qualifiers="0">1002</EventID>
    <Level>2</Level>
    <Task>101</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
    <EventRecordID>1615</EventRecordID>
    <Channel>Application</Channel>
    <Security />
</System>
<EventData>
    <Data>Photoshop.exe</Data>
    <Data>10.0.1.0</Data>
    <Data>d0c</Data>
    <Data>01cb2616be79e36f</Data>
    <Data>2</Data>
    <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
    <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
    <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
</EventData>
</Event>
And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
My Visual Studio analysis was far more informative. All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related. I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start. That also did not work.
(And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
Edit: The timestamp above might be a little odd-looking. I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report. Mostly I just skipped that part of killing a process.

Premiere Pro CC - Hangs on splash screen / slow startup

Hey everyone,
I recently asked another question about CC, but here's another one that's been annoying me since when I first subscribed.
Premiere Pro, in fact, any CC product I use, takes forever to load on startup. When it loads the splash screen it hangs (with no message) for a few minutes at a time before launching the application. I've checked the process and the software is using a consistent amount of CPU. I can only assume it's stuck in some sort of loop while trying to communicate with the activation server, but that's just guesswork on my part. The problem is exactly the same as this user here demonstrates: http://youtu.be/TeE6FBCzrqI
It's more annoying than anything, but for a subscription product it's rather bothersome. It's downright embarassing if a client comes over... and I wonder if it might be tied to some other compatibility issues I've been having.
I've been using CS6 in the mean time, but have to deliver a session through CC now. If anyone's experienced similar problems I'd really appreciate hearing your solutions. Running Windows 7.
Thank you!

Hi Kevin,
Thanks so much for your reply! I've reset the preferences in the past and did so again after your suggestion, but no luck. I even went into the AppData folder to remove the preferences sub-folder altogether. It still hangs and acts as "Not responding" for several minutes before startup.
I wonder if there's any connection between this issue and a second issue I'm having with CC not being able to play ProRes files. http://forums.adobe.com/message/5845690#5845690
In any case, I uninstalled every Adobe Product on my machine, ran the Adobe cleaner successfully, then re-installed Premiere Pro CC. Unfortunately, nothing seems to have changed.

T450s startup takes 35 seconds before showing splash screen. (11 sec wake-up)

The follwing are my problems:1. When starting up the machine, it takes about 35 seconds before the first screen activity appears (Lenovo splash screen). After that it boots quite normal.
2. When waking out of sleep mode it takes 11 seconds before I see the power led stopping to "breath" and the screen wakes up.
It feels like this is a hardware/bios related issue, as (so far I know) hdd/ssd is only accessed after the bios has loaded and has finished its hardware checks. When sticking in a bootable usb it only starts flickering after the bios had loaded on screen.
Question:
Does anyone has an idea why my laptop is waiting so long to boot or to wake up? I don't mind waiting a bit, but waiting for 35 seconds + the normal boot time is really annoying. Specially with the fact that the laptop doesn't show any sign of live for 35 seconds after briefly lighting up the keyboard backlights. The wake-up delay is also very annoying since even my 7 year old BSOD laptop wakes-up faster, and I'm using sleep mode a lot.
Some origins that I'm thinking about:
- Hardware check during initial hardware startup does not yet recognize a dedicated GPU card. (POST: Power On Self Test)
- I don't think this is a problem with my software since the problems occurs before reading any media.
Things I tryed already:
- Reset bios.
- Start in legacy mode.
- Bios update
- rebuilding MBR (although I don't expect this to be the problem.)
- Refreshing windows installation although I don't expect this to be the problem.)
This problem was already at the beginning (with origenal hardware):
From the first time I started the laptop (so even with the HDD) I noticed it took quite long to start. I remember pressing the ON/OFF button multiple times and thinking I did something wrong, when suddenly the "Lenovo" splash screen appeared.
I hope someone can help me!

My problems have been solved! An engineer contacted me that they have recieved a spare mainboard and they wanted to make an appointment. I gave them the adress where I worked the next day since I'm very mobile, and the next day an engineer came by. He seemed like a skilled IBM engineer and tested my machine and came to the same conclusion as me. He then did a few tests to see if the problem was caused by something else then the mainboard but ended by replacing my mainboard with good care. After the replacement the the boot and wake-up time was normal like it should be. I'm very pleased by the service Lenovo ThinkPad has given me. I need to add that when I called for support I got someone on the line that could not really understand me, neighter dutch or english. But that was also duo a bad connection it seemed.. But after that call I did not really expect this would come to a good end. I was then really suppriced that 5 day's later a dutch engineer manager called me to make a appointment.

Intermittent Startup Issues, Fan Reving

Has anyone else had startup issues with the G5's? I have had to re-seat memory in my lab on 3 machines and this seems, so far, to have alleviated the problem.
The funny thing is I have had these machines for about 8 months and never had this problem. My computers are locked and access to the physical memory is impossible.
Just curious?
Once I tried to run in Open Firmware the computer beeped 3 times, thus telling me it was a memory issue. Each of the machines exhibited different symptoms??? One was caught in the blue screen. One in the gray screen with neverending fan reving and spinning startup wheel. Lastly, a frozen computer (in an account) where all keyboard and mouse commands are not recognized. Upon hard shutdown and restart either this machine ended up stuck in gray screen **** or started ok.

Yeah, if you are in a humid lab (i.e. animal research lab) or some other unique environment sometimes the conditions can be less than ideal.
Most electromechanical connections, such as the slots where the RAM plug in or PCI card slots or cable connections, are more apt to become less than optimal in such a condition.
Another problem tends to be that the G5 is a hunk of cold metal when powered down or even sleeping and in a cold room. Humidity loves to condense on cold metal and has been known to cause problems.
However, since all you have had to do thus far is re-seat the RAM, the impact seems to be minimal at this time.
Luck-
-DaddyPaycheck

New StartUp Issue

My new MacBook Pro 17" has been having startup issues recently. After I shut down, leave, and come back, the startup issue occurs.
After pressing the power button, fans will go on, proccessing noises occur, HOWEVER, it just boots to a white/grey screen W/OUT the apple logo or round loading bar. The keyboard does not initialize either.
The only thing that I have found to 'fix' it, is just to leave it powered off for an extended period of time. It will then boot up.
I have tried many non-software related 'cures', and my compuer is completely up to date on all OsX software.
Any ideas guys??

you can try to boot to safe mode ( restart holding Shift )
- you can attempt to boot to install disc and disk utility
- you can boot to AHT ( apple hardware test ) to see what component is failing ( insert disc, restart holding D )
- chances are, this is a hardware issue though. you will probably need repairs.

Startup issue - Process 'Starting Framework'

Hi
I seem to have a startup issue with NM2004s. I get a Half Green/ Half Yellow icon in the MMC. The 01 instance is always yellow and never progresses onto green. I have a process status of 'starting framework'.
Anyone else had this issue?
Cheers
Ian

Hi Ian,
I just installed the J2E on a laptop that already has a NSP instance.I am facing the same issue on the J2E.Do you remember if you could resolve this and how?
Any hints would help.
Thank you

How do i disable the startup splash screen in elements 9

How do i disable the startup splash screen in elements 9

Try making a direct shortcut for the Organizer and Editor. Make sure you have the correct file path as there is more than one exe file. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe"
Then click Next; then click Finish
Then make a direct shortcut for the Editor in a similar manner.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files\Adobe\Photoshop Elements 9\PhotoshopElementsEditor.exe"
Then click Next; then click Finish
N.B. on 64 bit systems navigate to Program Files (x86)

Managed server startup issue!!!

hi all,
i am facing managedserver startup issue
i am start the managed server it will up take the 6 min
how to reduce the time
1)i am trying differnt ways 1)threaddump 2)GCparamets
but no usee
can u see the log and give me suugestions
below log one perticuler area it will load the application 4 min
please see the time stamps 8:31:01 to 8:35:09
please give me suggistions!!
======================================
####<Apr 11, 2010 8:31:00 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043060997> <BEA-149059> <Module eci.jar of application Agile is transitioning from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
####<Apr 11, 2010 8:31:01 PM PDT> <Info> <EJB> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-010009> <EJB Deployed EJB with JNDI name com.eigner.eci.EciSession.>
####<Apr 11, 2010 8:31:01 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-000000> <Listener: end ModuleCtx[appId=Agile, modId=eci.jar, type=ejb, Target=Cluster/AgileCluster] STATE_PREPARED>STATE_ADMIN>
####<Apr 11, 2010 8:31:01 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-149060> <Module eci.jar of application Agile successfully transitioned from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309172> <BEA-000000> <Relaying updated state for app, Agile to STATE_ADMIN>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309173> <BEA-000000> < +++ Returning app's state : STATE_ACTIVE>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <

hi sandeep,
i take the thread dump 10 times at the start the server can u look into this one...
===============================
CLASSPATH=/local/mnt/agile/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/jrockit_160_05/lib/tools.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic.jar:/local/mnt/agile/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/webservices.jar:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/local/mnt/agile/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/local/mnt/agile/agile93/agileDomain/lib/jms.jar:/local/mnt/agile/agile93/agileDomain/lib/jndi.jar:/local/mnt/agile/agile93/agileDomain/lib/tibjms.jar
PATH=/local/mnt/agile/bea/wlserver_10.3/server/bin:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/bin:/local/mnt/agile/bea/jrockit_160_05/jre/bin:/local/mnt/agile/bea/jrockit_160_05/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
Your environment has been set.
QCHTTPHeaderIdentityAsserter.initialize
AgileAuthenticationProviderImpl.initialize
2010-04-10 20:03:14
Full thread dump Java HotSpot(TM) Server VM (10.0-b19 mixed mode):
"Thread-13" daemon prio=10 tid=0x62a8a800 nid=0x1b6 waiting on condition [0x5f7b8000..0x5f7b9130]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0xf2d78078> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
     at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
     at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
     at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
     at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
     at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"LDAPCache-TTLTimer" daemon prio=10 tid=0x09277000 nid=0x1b5 in Object.wait() [0x5f90b000..0x5f90bfb0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d7c068> (a netscape.ldap.TTLTimer)
     at netscape.ldap.TTLTimer.run(LDAPCache.java:828)
     - locked <0xf2d7c068> (a netscape.ldap.TTLTimer)
     at java.lang.Thread.run(Thread.java:619)
"LDAPConnThread-1 ldaps://qpip.qualcomm.com:389" daemon prio=10 tid=0x5f6fc000 nid=0x1b4 runnable [0x5f95c000..0x5f95d030]
java.lang.Thread.State: RUNNABLE
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
     - locked <0xf2d820a8> (a java.io.BufferedInputStream)
     at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
     at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
     at java.lang.Thread.run(Thread.java:619)
"Thread-12" daemon prio=10 tid=0x61c2ac00 nid=0x1b3 waiting on condition [0x5f9ad000..0x5f9adeb0]
java.lang.Thread.State: TIMED_WAITING (sleeping)
     at java.lang.Thread.sleep(Native Method)
     at oracle.jdbc.pool.OracleConnectionCacheTimeOutThread.run(OracleConnectionCacheTimeOutThread.java:80)
"LDAPConnThread-0 ldap://10.47.24.141:9001" daemon prio=10 tid=0x61cb5400 nid=0x1b1 runnable [0x5fb55000..0x5fb55db0]
java.lang.Thread.State: RUNNABLE
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
     - locked <0xf2d920a8> (a java.io.BufferedInputStream)
     at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
     at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
     at java.lang.Thread.run(Thread.java:619)
"DoSManager" daemon prio=10 tid=0x0932a000 nid=0x1b0 waiting on condition [0x5f9fe000..0x5f9fee30]
java.lang.Thread.State: TIMED_WAITING (sleeping)
     at java.lang.Thread.sleep(Native Method)
     at com.octetstring.vde.DoSManager.run(DoSManager.java:433)
"VDE Transaction Processor Thread" daemon prio=10 tid=0x61c07000 nid=0x1ae in Object.wait() [0x5fba6000..0x5fba7130]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
     at java.lang.Object.wait(Object.java:485)
     at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
     - locked <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
     at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
"ExecuteThread: '16' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a67400 nid=0x1ad waiting for monitor entry [0x5fbf7000..0x5fbf7fb0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '15' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a66000 nid=0x1ac waiting for monitor entry [0x5fc48000..0x5fc49030]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '14' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a65000 nid=0x1ab waiting for monitor entry [0x5fc99000..0x5fc99eb0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '13' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a63c00 nid=0x1aa waiting for monitor entry [0x5fcea000..0x5fceaf30]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '12' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a62c00 nid=0x1a9 runnable [0x5fd3b000..0x5fd3bdb0]
java.lang.Thread.State: RUNNABLE
     at weblogic.socket.PosixSocketMuxer.poll(Native Method)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:102)
     - locked <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '11' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a61c00 nid=0x1a8 waiting for monitor entry [0x5fd8c000..0x5fd8ce30]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '10' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a60800 nid=0x1a7 waiting for monitor entry [0x5fddd000..0x5fdde0b0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '9' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a6f400 nid=0x1a6 waiting for monitor entry [0x5fe2e000..0x5fe2f130]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928d400 nid=0x1a5 waiting for monitor entry [0x5fe7f000..0x5fe7ffb0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '7' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928c000 nid=0x1a4 waiting for monitor entry [0x5fed0000..0x5fed1030]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928b000 nid=0x1a3 waiting for monitor entry [0x5ff21000..0x5ff21eb0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '5' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0930c400 nid=0x1a2 waiting for monitor entry [0x5ff72000..0x5ff72f30]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '4' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928dc00 nid=0x1a1 waiting for monitor entry [0x5ffc3000..0x5ffc3db0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x09288c00 nid=0x1a0 waiting for monitor entry [0x60014000..0x60014e30]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4800 nid=0x19f waiting for monitor entry [0x60065000..0x600660b0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4400 nid=0x19e waiting for monitor entry [0x600b6000..0x600b7130]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0932d800 nid=0x19d waiting for monitor entry [0x60107000..0x60107fb0]
java.lang.Thread.State: BLOCKED (on object monitor)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
     - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x0932c400 nid=0x19c in Object.wait() [0x60158000..0x60159030]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2daa030> (a weblogic.work.ExecuteThread)
     at java.lang.Object.wait(Object.java:485)
     at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
     - locked <0xf2daa030> (a weblogic.work.ExecuteThread)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
"Thread-7" daemon prio=10 tid=0x0932e400 nid=0x19b waiting on condition [0x601a9000..0x601a9eb0]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0xf2daa150> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
     at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
     at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
     at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
     at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
     at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"weblogic.timers.TimerThread" daemon prio=10 tid=0x60467800 nid=0x19a in Object.wait() [0x603fe000..0x603fef30]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
     at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
     - locked <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
"weblogic.time.TimeEventGenerator" daemon prio=10 tid=0x60431800 nid=0x199 in Object.wait() [0x60555000..0x60555db0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
     at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
     - locked <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
     at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
     at java.lang.Thread.run(Thread.java:619)
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x6042e000 nid=0x198 runnable [0x605a5000..0x605a6e30]
java.lang.Thread.State: RUNNABLE
     at java.util.HashMap.<init>(HashMap.java:209)
     at java.util.jar.Manifest.<init>(Manifest.java:37)
     at java.util.jar.JarFile.getManifestFromReference(JarFile.java:160)
     at java.util.jar.JarFile.getManifest(JarFile.java:146)
     at weblogic.utils.classloaders.GenericClassLoader$JarSource.getManifest(GenericClassLoader.java:528)
     at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:310)
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
     - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
     - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:335)
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
     - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     at weblogic.ejb.container.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.java:1790)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:397)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
"Timer-1" daemon prio=10 tid=0x609e3800 nid=0x197 in Object.wait() [0x605f7000..0x605f80b0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d7a2c0> (a java.util.TaskQueue)
     at java.util.TimerThread.mainLoop(Timer.java:509)
     - locked <0xf2d7a2c0> (a java.util.TaskQueue)
     at java.util.TimerThread.run(Timer.java:462)
"Timer-0" daemon prio=10 tid=0x609e0000 nid=0x196 in Object.wait() [0x62350000..0x62351130]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d7a3b0> (a java.util.TaskQueue)
     at java.util.TimerThread.mainLoop(Timer.java:509)
     - locked <0xf2d7a3b0> (a java.util.TaskQueue)
     at java.util.TimerThread.run(Timer.java:462)
"RMI TCP Accept-9896" daemon prio=10 tid=0x61ebf800 nid=0x194 runnable [0x623ba000..0x623bb030]
java.lang.Thread.State: RUNNABLE
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
     - locked <0xf2d76210> (a java.net.SocksSocketImpl)
     at java.net.ServerSocket.implAccept(ServerSocket.java:453)
     at java.net.ServerSocket.accept(ServerSocket.java:421)
     at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
     at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
     at java.lang.Thread.run(Thread.java:619)
"RMI TCP Accept-0" daemon prio=10 tid=0x61eb6c00 nid=0x193 runnable [0x6240b000..0x6240beb0]
java.lang.Thread.State: RUNNABLE
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
     - locked <0xf2da0170> (a java.net.SocksSocketImpl)
     at java.net.ServerSocket.implAccept(ServerSocket.java:453)
     at java.net.ServerSocket.accept(ServerSocket.java:421)
     at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
     at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
     at java.lang.Thread.run(Thread.java:619)
"Low Memory Detector" daemon prio=10 tid=0x63b01400 nid=0x192 runnable [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"CompilerThread1" daemon prio=10 tid=0x63901c00 nid=0x191 runnable [0x00000000..0x634f3278]
java.lang.Thread.State: RUNNABLE
"CompilerThread0" daemon prio=10 tid=0x63900800 nid=0x190 runnable [0x00000000..0x635742f8]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x0919e000 nid=0x18f waiting on condition [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=10 tid=0x09183000 nid=0x18e in Object.wait() [0x63aad000..0x63aae130]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
     - locked <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
     at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x09181c00 nid=0x18d in Object.wait() [0x63afe000..0x63afefb0]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
     at java.lang.Object.wait(Object.java:485)
     at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
     - locked <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
"main" prio=10 tid=0x0900f000 nid=0x17b in Object.wait() [0xf7f1d000..0xf7f1e208]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
     at weblogic.t3.srvr.SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
     - locked <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
     at weblogic.t3.srvr.SubsystemRequest.action(SubsystemRequest.java:81)
     at weblogic.t3.srvr.SubsystemRequest.start(SubsystemRequest.java:51)
     at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:457)
     at weblogic.t3.srvr.ServerServicesManager.startInAdminState(ServerServicesManager.java:237)
     - locked <0x6536b220> (a java.lang.Class for weblogic.t3.srvr.ServerServicesManager)
     at weblogic.t3.srvr.T3Srvr.initializeAdmin(T3Srvr.java:738)
     at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:499)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
     at weblogic.Server.main(Server.java:67)
"VM Thread" prio=10 tid=0x0917e800 nid=0x18c runnable
"GC task thread#0 (ParallelGC)" prio=10 tid=0x09015c00 nid=0x17c runnable
"GC task thread#1 (ParallelGC)" prio=10 tid=0x09016c00 nid=0x17d runnable
"GC task thread#2 (ParallelGC)" prio=10 tid=0x09018000 nid=0x17e runnable
"GC task thread#3 (ParallelGC)" prio=10 tid=0x09019000 nid=0x17f runnable
"GC task thread#4 (ParallelGC)" prio=10 tid=0x0901a000 nid=0x180 runnable
"GC task thread#5 (ParallelGC)" prio=10 tid=0x0901b000 nid=0x181 runnable
"GC task thread#6 (ParallelGC)" prio=10 tid=0x0901c400 nid=0x182 runnable
"GC task thread#7 (ParallelGC)" prio=10 tid=0x0901d400 nid=0x183 runnable
"GC task thread#8 (ParallelGC)" prio=10 tid=0x0901e400 nid=0x184 runnable
"GC task thread#9 (ParallelGC)" prio=10 tid=0x0901f400 nid=0x185 runnable
"GC task thread#10 (ParallelGC)" prio=10 tid=0x09020800 nid=0x186 runnable
"GC task thread#11 (ParallelGC)" prio=10 tid=0x09021800 nid=0x187 runnable
"GC task thread#12 (ParallelGC)" prio=10 tid=0x09022800 nid=0x188 runnable
"GC task thread#13 (ParallelGC)" prio=10 tid=0x09023800 nid=0x189 runnable
"GC task thread#14 (ParallelGC)" prio=10 tid=0x09024c00 nid=0x18a runnable
"GC task thread#15 (ParallelGC)" prio=10 tid=0x09025c00 nid=0x18b runnable
"VM Periodic Task Thread" prio=10 tid=0x61ec2000 nid=0x195 waiting on condition
JNI global references: 957
Heap
PSYoungGen total 229376K, used 39147K [0xe4d70000, 0xf4d70000, 0xf4d70000)
eden space 196608K, 8% used [0xe4d70000,0xe5cf3870,0xf0d70000)
from space 32768K, 70% used [0xf2d70000,0xf4427708,0xf4d70000)
to space 32768K, 0% used [0xf0d70000,0xf0d70000,0xf2d70000)
PSOldGen total 1835008K, used 0K [0x74d70000, 0xe4d70000, 0xe4d70000)
object space 1835008K, 0% used [0x74d70000,0x74d70000,0xe4d70000)
PSPermGen total 62208K, used 62093K [0x64d70000, 0x68a30000, 0x74d70000)
object space 62208K, 99% used [0x64d70000,0x68a134a8,0x68a30000)

Audition 2.0 Startup Issues/Frozen at Splash Screen

Similar Messages

Maybe you are looking for