Audition only recording left channel?

Hi Guys,
I'm recording some records and while looking at the wav form I noticed that audition was only recording the left cahnnel but in stereo (both channels) I've looked at everything else and audition has got to be it. Recording is fine using Cool edit 2.0 but in audition 3 this is happening? Any info out there on this?
Also, in my recording travels. I tried recording through USB but found that the wave file looked somewhat compressed and unnatural. Looks great through a soundcard but through usb it looked very strange. is this natural?
George

Check in the Audio hardware Setup page that you have correctly selected the stereo input. The drop down list that Audition usually list the Mono inputs first ie. 01M, 02M etc.. You need to look further down the list and select the appropriate stereo inputs usually numbered 01S, 02S etc. depending on your audio interface.

Similar Messages

  • SB Audigy 2 Platinum only recording left chan

    I am attampting to do some custom mixing doing some voice-over for a narrated program.
    Listening with headphones as I record all sounds fine, however, when I play the recording I only have left channel content. I did notice that the record level indicates that there is only a left channel component. I've checked all my presets and I'm set to record MP3 Stereo and can't find any other settings which could be muting the right channel.
    I'd appreciate some guidance.

    Jallenwebb,
    If you are using the Mic/Line in 2 on the platinum dri've you will want to set the volume control on it to microphone (turn the volume up to where you want it...all the way down till it clicks sets it to line in mode) as in line in mode it records in stereo mode (both channels are recorded and since most mics are mono then you end up with only one channel) but in Microphone mode it records it as a mono input that is panned to center so it plays back in both channels.
    Jeremy

  • IMac into cam adaptor into garage band works,but GB only sees left channel.

    iMac into cam adaptor into garage band works,but GB only sees left channel. Do you think it's the wiring of iMIcs USB vs. the camera adaptor? Or is there a switch in GarageBand that will bring in both channels? Thanks!

    Sorry, I meant iMic into Camera Adaptor, not iMac. (no option to edit and re post ones own post)

  • ITunes only outputting left channel through Soundsticks

    I've been using the original Harman Kardon Soundsticks (USB type) for about six years now without problems, but just today they've started behaving oddly in iTunes and Front Row. Only the left channel is now output, through BOTH speakers. They work normally when I use the Quicktime player, but not iTunes/FR. If I switch the output to internal speakers, then iTunes outputs both channels normally. I tried deleting the preferences, and updating iTunes to 8.01 from 8.0 but without any difference. Have also tried rebooting, disconnecting and reconnecting the speakers, and the power to the speakers but nothing seems to make any difference. Additionally, there's no "balance" option in System Preferences for USB speakers.
    There clearly isn't anything physically wrong with the speakers themselves so can only assume there must be a corrupted preference file or similar, but have no idea where to start looking. Can anybody help?

    I have the exact same problem but I use Windows vista into a MOTU Ultralite Firewire interface outputting to some powered monitor speakers. I know the issue has got to be with iTunes because i can open the mp3 in windows media palyer and it plays just fine in proper stereo. It's really annoying and I cant seem to find the solution.

  • AUX 2 (stereo RCA) on Audigy 2 ZS Platinum only records left chann

    As the title states, I can only get a signal through the left channel of the AUX 2 input (stereo RCA inputs on the front panel). I know for sure that both the left and right input channels are carrying a signal, because if I plug in the R channel into the L input, I get signal. I'm pretty sure this was working in the past, but I can't be certain. Is there a setting somewhere to enable stereo playback/recording through AUX 2? I'm pretty sure it should be there by default, so I have a feeling something is wrong with my card/front panel. I verified that the ribbon cable is firmly connected on both ends. Any ideas?

    Hi, is anyone able to offe some help? Thanks

  • USB Audio Device only plays left channel out both speakers.

    usually i use my Yamaha Audiogram 3 usb audio device to record things in cubase, and when the cubase settings are set it is fine, but as soon as i close cubase, the left channel of any audio (like itunes playback) plays out of both left and right speakers in the headphones i use. this only happens when the Audiogram 3 is plugged into 1 certain usb port (of 2).
    its even fine when i have cubase running in the background while i play music from itunes. it just doesn't make any sense. it also appears to recognize that its stereo in one port, but not the other.
    i would suspect it has something to do with the drivers for the usb device (if there even are any), that the drivers it placed into the system only applies to that one usb port, but if thats the case, you would think it would install new drivers for the other port as soon as i plug in my audiogram, but thats not the case.
    no cd for the audiogram. you simply plug it in.
    ive tried restarting the computer, plugging it in again, trying to change the settings. nothing seems to work. i need the other port to work.

    Try resetting the PRAM. Info here:
    http://docs.info.apple.com/article.html?artnum=2238
    You may also want to take a look at the Audio MIDI Setup utility and make sure everything is configured properly there.

  • Output only in left channel

    So I recorded a song and various instruments... everything was going great but I don't know what happened, suddenly sound was only coming from left channel and right channel only gets like reverbs and stuff. At the bottom only one of the bars is showing sound bouncing. How do I pan it back to normal?

    It could be that we're both missing something obvious that someone else would see.
    However, trashing Preferences (and to a lesser extent Caches) is a way to get rid of GB "ghosts" that mysteriously show up for no reason and mess things up. It often fixes mysterious problems that can't be fixed any other way (short of a complete uninstall and reinstall). When you get rid of preferences, it makes GB appear fresh to the computer. Caches are just temporary files - you can trash all of them and they simply grow back like weeds when you run the program.
    If you're concerned about the risk, you could put them into folders, put the folders into the trash, and restart your computer, but don't empty the trash so the prefs and caches stay there "just in case." Open up GB (it will look like it's being opened for the first time), and new preference files and caches will be generated automatically. However, you could always retrieve your old preferences and caches in the trash, and swap them out for the new ones (although it's really better just to trash the old ones).
    This won't effect your other projects and may not even help this one. However, it may fix the problem as this sometimes does fix ghost-in-the-machine problems, and is along the lines of housekeeping. It's refreshing some files that occassionally get corrupted, forcing the program to generate pristine new ones.

  • Creative X-FI xtrememusic Vista 32Bit Can only record Left chan

    I seem to be have a major recording problem, when i select (REC)Line-in the recording output level only shows through the Left speaker (No signal on the right channel), even though the sound is coming through both speakers. I cannot get it to record in stereo, it will only record on the left speaker channel. If i change the REC to misrophone i have major Distortion no matter how much i decrease the input level.
    Everything else is fine but i cannot work out what i am doing wrong. I'm getting input on both channels but when recording its only recording through the left channel. Please help us
    My setup:
    Vista ultimate 32bit
    Soundblaster x-fi xtrememusic sound card
    lated vista drivers : Vista Driver 2.5.0004
    Inputs used : guitar and microphone.
    standard 2 stereo spreaker setup L/R
    I've also tried the drivers on the CD and the BETA drivers but i'm still having problem recording in stereo. the input is only showing the left channel when recording.

    Try saving the file to your desktop or someplace, then run the installer instead of opening it when you start the download.

  • Exports for DVD only include left channel of audio! Help!!!

    Hi, I just realized that the files that I have been exporting using compressor have been only exporting the left channel. I am not sure what the problem is and would appreciate any help anyone could give me, as I'm on a big deadline and need to solve this ASAP.
    The way I've been doing it, is I right click on the sequence name in Final Cut Pro and select Export > Export Using Compressor. Then I selected the DVD Best Quality 90 Minutes option. The AIFF file that is created seems to only have audio in the left channel. The original files themselves are definitely stereo, and play both channels in Final Cut.
    I really don't understand. The Inspector within Compressor shows this information for the AIFF file:
    File Extension: aiff
    Estimated file size: unknown
    Audio Encoder: 16-bit Integer (Big Endian), Stereo (L R), 48.000 kHz
    It says Stereo, so I don't know what the problem is! Please help!!!

    In the Sequence Settings, I see this:
    Downmix: 0
    Grouping: Stereo
    I also checked the Audio Mixer window and nothing seems to be muted or solo'd. A1 is panned all the way to the left, and A2 all the way to the right, but I'm guessing this is normal, and just the way that stereo channels are shown?
    I'm not sure if I have downmix enabled--where do I check that?
    On somebody else's suggestion, I tried exporting a non self-contained Quicktime movie from FCP and then dragged that into Compressor and it seems to solve the stereo issue. Not sure why it doesn't work going straight from FCP, but there must be something going on inside there...
    Thanks so much for your help. I really appreciate it!

  • Sound only from left channel

    I bout an IPhone 3G for my wife last friday. She complained about the music quality saying that her little cheap MP3 player sounded better. I plugged in the headset and found that there was sound only fro one channel (Left). I plugged my headset from my 3GS and it also only had sound from one channel. Any suggestions?

    Try restart, reset, then restore.
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
    If this doesn't help, you may need to make an appointment at the Genius BAr ( Apple Store). The iphone has a one year warranty.

  • Airport Express: Sound only from left channel

    I've got an Airport Express which used to work fine, but at some point in the past few months, I noticed that there was no audio coming from my right speaker when using Airtunes. I've check the cable and it does transmit both left and right when I hook my iPod up to it.
    I've also got the low volume problem going on in the left channel that's working. And ideas?

    I took the AirPort Express to the Apple Store and it turned out that it was a physcial problem with the hardware. It had to be replaced.

  • Sound only on left channel

    Hi,
    I'm shooting some video on a JVC GR-DV3 (admittedly old but still does the job!) and am using an Audio Technica ATR 3350, omnidirectional Lavalier condenser microphone as the motors are too noisy for speech using the built-in mics.
    When I import the clips into iMovie all the sound is on the left channel, not equally distributed between the two?
    Any thoughts or fixes?
    JC

    I bet the microphone is a mono microphone. When you plug that into a 3.5mm stereo microphone input, all sound is "sent" to the left channel. You need an adapter cable or adapter socket.
    http://www.shopwiki.co.uk/_3.5mmStereo+Plug+to+3.5mm+Mono+SocketAdaptor?o=241526279&s=314334&

  • Logic won't let me record stereo style! Only the left channel.

    I was recording just fine with my keyboard connected to my TASCAM US-122 USB interface with an instrument cable today then all of the sudden I could only hear the keyboard in the left side of my headphones. I tried the other line-in and then I could only hear myself on the right side. What went wrong here? Keep in mind, it was working just fine but in between takes it cuts one side out. And all of my pan adjustments are equal.

    If you are using a single, jack to jack cable you are effectively recording in mono, on one channel. When you are monitoring your recording signal you will only hear one side because your tascam is only sending it to one logic channel...
    Your tascam has a mono direct monitoring switch - you should switch it on when recording with only one jack to jack cable - it will allow you to monitor directly through the interface whilst hearing your sound on both sides. You should record to a mono logic track and you will then be able to pan it afterwards as desired.
    For a true stereo keyboard recording you would need to connect two jack to jack cables from your keyboard (if it has left and right outputs) into two separate mono channels on your interface. You could then record to a stereo track on logic, or two separate mono tracks panned hard left and right.
    I may be wrong, but I reckon your problem stems from not properly understanding how the stereo field corresponds to recording channels.

  • Gigaworks S750 + Audigy1 - Only hear left channel in left and right speakers

    Since last week I'm the proud owner of a gigaworks S750. Since my new computer went RMA I decided to hook it up on my old computer with an Audigy (SB Audigy E400) audio card.
    The original Audigy drivers come with this test program that tests all channels saying "front left", "front right" etc etc through the respecti've speakers.
    However, when running this test program I hear the "front left" message through both the front speakers, and the "rear left" message through both the side speakers.
    The "front right" and "rear right" messages I don't hear.
    I've been looking through the settings of the audigy and reading the manual of the Gigaworks set, but nothing turned up.
    My old Philips 4.1 speakerset did not have this problem, so my guess is it's something with the gigaworks.
    Thanks

    U sure the speakers are set to 7.1 ? BTW u need Audigy 2 ZS or Audigy 2 Platinum to make all your speakers make the correct sounds. BUY A NEW SOUNDCARD!!!
    Message Edited by DexterLabs on 02-06-2005 01:30 AM

  • [BUG N95]Radio only on left channel

    Hi. Since upgrading to v12 firmware the radio is only playing on the left headphone. First I thought the headphones might be damaged but the music player works perfectly, its just the radio only going to the left headphone!
    Whats that about?!
    The bug it does NOT depend on signal strenght.
    i'have made more tests (deep reset inclusive).

    Hi guyz.Just wondering if you have tried to set the Balance in the music-Player of N95?
    I suggest you guyz play a song and then goto the setting of the music-player maybe then it should work, if you see whether the balance is out.... its worth a try.
    You can then check in your phone(general)setting{tools->Setting->general->enh​ancements} that you have selected HEADSET as your default.
    May be it should solve it!
    Come on give it a try then post your results here.

Maybe you are looking for