Auditor reports not reporting accurate login information

Hi
The Auditor infrastructure and activity universe appears to be intact.
However all the auditor reports are not showing accurate information.
For instance the report showing user logins is not reporting all logins
for March and much of Feb. When I am sure there had been logins in
these months.
I looked at the ProdAuditDB audit_event table it has number of records
from these months with blank user_name. I am not sure if this is the
cause. But just FYI.
Any ideas what might be the reason or better yet how to fix it.
thanks
- sangeeta

Similar Messages

Ff will not save any login information re installed still not doing it

for the last 5 days ff has started logging me out of my sites (forums etc). Re-installed still doing the same, and i have noticed everytime i open up ff it searches for add ons it has never done this before.
I have it on my netbook and desktop, the laptop has exactly the same settings but they keep me logged in whereas the laptop wont.
I totally uninstalled every trace of ff from the laptop before re-installing from fresh, if i log into a site, close ff it has logged me out.
Up until a week ago it had no problem at all keeping me logged into any site.

* Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all cookies, images, pop-up windows, software installation, and password exceptions.
See also:
*http://kb.mozillazine.org/Cookies

Crystal reports asking for login information at runtime

BH
Hi,
I've installed the Crystal Reports for VS2010 (filename: CRforVS_13_0_9). I've created a new "Crytal Reports Application" Project and I've added dataset which is connected to Access 2010 database. When I create a new report I use the "Project Data > Ado.Net Datasets > CrystalReportsApplication8 > Ledger" as my connection. I connect the report to the CrystalReportViewer in Form1.
However, when I run the application, I get prompted for a Username and Password. Even though I type in the correct user name and password, it does not let me login and view the report. I've been struggling for a few days with this. What am I doing wrong? I do not want the application to prompt for a username and password, because I've already entered the credentials in the application. I've searched on the web for a solution, but with no success. Please help. I'm using C#.
Thanks
Aron

See if this document will help:
Crystal Reports Guide To ADO.NET
Go to page 6 and follow the instructions there. Also, see KBA 1525432 (search box is ion top right corner)
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
https://twitter.com/SAPCRNetSup

Build a project report with detail information

Hi,
I want to build a project report in BW and am not sure if my idea is feasable....
The report should consist of two parts:
the head part consists detailed information about a project like ID, status, owner, start date.
The body part contains information about a key figure 'worked hours' drilled down by department and drilled through by calendar month.
I am completely free where I want to store the data to have it available in the report. My idea was to store project head information in an ODS and to store the key figure 'worked hours' in a cube with the characteristics project, month and department.
What would be the best way now to build a report on these information. As far as I know, a normal query is always used to show key figures, but not detailed information of a project. How can I report the information that I want to show in the report header?
Thanks for any help!
Cheers
Tatjana

What is the source of the data coming?
if you are using a custom report and if u thinking data is not huge.. keep every thing in one ODS and drag in the reports of the required fields..
Regards,
Hari

Reports 10g Missing information during file conversion

I have a large report that includes several graphs that keeps giving me an error during conversion that says the report is missing information and cannot create the file. I have never seen this before this report. It is actually giving me the message REP-1067 Some information is missing in the report. It just seems to happen when I add another graph. There is no information on REP-1067 in searching in the forums which does not give me a lot of hope.. Anyone have any ideas where to look. Report Builder 10g, Database 10g.
There are already several graphs in the report, so I don't believe it is a graphing issue.
Edited by: jdev_p8baller on Nov 11, 2011 1:00 PM

Hi,
check this if it is helpful.
TABLES: likp, lips,itcpo.
DATA: pdftab type standard TABLE OF tline,
datab TYPE standard TABLE OF itcoo.
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = 'Z1989_PRAC'
LANGUAGE = SY-LANGU
OPTIONS = itcpo
// call script using start_form and write_form.
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT = gi_ofc
CALL FUNCTION 'CLOSE_FORM'
TABLES
OTFDATA = datab
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
IMPORTING
BIN_FILESIZE = BINFILE
TABLES
otf = datab
lines = pdftab
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = binfile
filename = 'D:\MYFILE.PDF' //give the address where u want output.
FILETYPE = 'BIN'
tables
data_tab = pdftab
Regards
Rajesh Kumar

Urgent Please: Cannot publish Reports to the Sharepoint Integrated - Reporting Services Login

Hi,
Sharepoint 2010 / SQL Server 2008 R2
The user I am using in BIDS to deploy the reports has Admin permission to the site collection and databases.
Reporting Services Login prompt all times and I can´t go ahead to publish the reports.
I ve reviewed my deployment properties -
http://msdn.microsoft.com/en-us/library/bb283155(SQL.90).aspx
The same test works to my dedicated server (Sharepoint and SQL Server in the same machine) but not to the enviorement bellow:
Server 1 - SSED, SSAS, SSRS, Sharepoint Web Front (minimal installation)
Server 2 - Sharepoint Server 2010 (SSRS Sharepoint Integration Mode)
I´ve read all the discussions and articles I couldn´t find anything conclusive.
Please, any clues?!
Thanks in advance,
Alex Berenguer

Hi Syed, thank you so much for your help. I have already spent many hours in order to solve this issue but nothing so far.
The Web Application I created to test it has a Business Intellicente Center as Site Collection. The Report Services features is running on it. I checked it. Thanks.
Follow more details I ´ve discovered:
Here's the scenario:
I have a Web Front End (WFE) server, and an Application Server (AS) in a Sharepoint 2010 Farm. The configuration database, content database, etc.. are located on a clustered SQL 2008 R2 instance on another set of machines. I have installed SQL
2008 R2 Reporting Services w SP1 on the AS. I have installed the SQL 2008 Reporting Services Add-In for Sharepoint 2010 on the WFE. I have gone through all the configuraiton settings, set the SPNs for the service accounts, etc... The Excel Services
with external data, for example, is working fine.
When the reporting services integration is set to "Trusted Account", I can deploy reports to the server with no problem, EXCEPT that I can't deploy data sources that use "Windows Authentication" as their credentials, which is desirable for our implementation.
When I switch the reporting services instance to "Windows Authentication", I can no longer deploy projects to the report server. When I go to deploy the reports, I continually get a "Reporting Services Login" prompt, showing the server it is being deployed
to, and requesting a username and password. No combination of username and password works.
Here's a fun little bit for you too, if I continue to try to login to the server, I will eventually (after hitting the GPO threshold) lock out my account from Active Directory. This I found out after nearly creating a set of tracks down my scalp all
day today trying to figure out what was happening to my sharepoint sites while I was debugging this....
So it seems that it is trying to authenticate my login credentials through BIDS, but is unable to do so.
Also, when I attempt to "Manage Datasource" directly through the Sharepoint interface I am getting 401 errors.
I appreciate any assistance.
Thanks a lot.
Alex Berenguer

Unable to connect to XL Reporter. Login failed for user 'xlruser'

Hi,
I have one user getting the following error when starting XLR in 2005:
Unable to connect to XL Reporter. Login failed for user 'xlruser'
I have done a clean uninstall of XLR on the client but the message still appears on starting the add-on
Greig

Check this SAP Note: 847981 Unable to connect to XLR after installation
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=847981]

HT201317 When I go to log onto iCloud using my Windows 7 and it asks for my login information, I get the error saying my Apple account is valid but not an iCloud account. How do I get an iCloud account? Thank you

When I go to log onto iCloud using my Windows 7 and it asks for my login information, I get the error saying my Apple ID is valid but not an iCloud account. How do I get an iCloud account?
I don't have any apple products personally, this is for work to use Photo Stream so when Superintendents & Project Managers take pictures of their construction site, I am able to have those images immediately.
Thank you

You can not create an iCloud account using a PC, you will need an Apple product. Once the account exists you can logon to it from a PC.

I am not able to login to my facebook account and error message reads "This web site does not supply ownership information." Please help

I am not able to login to my facebook account and error message reads "This web site does not supply ownership information." Please help
only title bar opens and nothing else....please help

Normally, when you connect via http, the browser doesn't check for site identity, so I don't understand what's happening there.
Do you have any security-related add-ons that force popular sites to use a secure connection, or claim to provide anonymous browsing?
Were you making the connection on your own network or on a public network (e.g., school, coffee shop)? If it was a public network, maybe the error indicates that your traffic was being intercepted???
Without hands on, this is a tough one to diagnose.

How can I report wrong song information, the contact form doesn't work

There used to be a contact form to report broken song information but I can't seem to find it.From herehttps://support.spotify.com/uk/learn-more/faq/#!/article/how-do-I-report-a-content-error-on-spotify/I click on the let us know here linkhttp://www.spotify.com/about-us/contact/contact-spotify-account/On the new page I click on Technical issuesThen I want to report a broken song or wrong track informationhttps://support.spotify.com/uk/contact-spotify-anonymous/#Then the link How do I report broken tracks or albumsWhich links me back to the starthttps://support.spotify.com/learn-more/faq/#!/article/how-do-I-report-a-content-error-on-spotify/Where's it gone?

Hello:
What about going here to this link: https://support.spotify.com/uk/contact-spotify-anonymous/
click on the green bubble that says I STILL NEED HELP, does that give you input boxes to input information into by reporting track problems and issues? You might have to do this for each song and/or album you find problems with one at a time though.

Report Business partner information

Hello Experts,
Using transaction SE38, we would like to run report Business partner information. Could anyone provide the report name?
Thank you

you could run report RVDEB001 for your requirement

When I tried to log into my itunes account, I was asked to update my credit card information. When I confirmed my credit card info, I got a response about my security code not being accurate -which is not the case-it is 100% accurate. How do I fix?

I keep getting a message about my security code not being accurate. I tried 3 different cards & have the same issue. Is this a systems issue? I need to get my apps installed on my new iPhone 4. I am unable to download without confirming my credit card info- My security codes are 100% accurate.Anyone else having this issue? What is the fix for this?

Ohemod,
There are 120+ countries that have iTunes Stores, but that leaves many that do not. You can consult this document: iTunes Store: Which types of items can I buy in my country?
Opening in a new country requires a tremendous amount of legal, commercial and financial investment, but I am sure Apple would be interested in knowing where there is unmet demand. If you wish to make suggestions to Apple, you can use the iTunes Feedback page.

Login information for RFC call

Hi there,
I would like to know if there is a way to authenticate a user via bsp and get that login information to make the RFC call to different systems.
i tried the to call an FM via RFC directly from abap and it forces me to login and it works but when i put that code to bsp. I just get a "page cannot be displayed" error.
I know i can enter an ID and password on sm59 for the connection but i need to let the user login
I am using this for a user creation tool.. instead of using su01 to create a user it will be done via bsp and would like to reflect the changes done when running the reports from SUIM
thanks in advance
Ryan

Hi Ryan,
I will assume your RFC Destination already trusted system and using current user logon (see my previous reply).
However this still prerequisite for the next step.
Now, please correct me if my understanding is wrong.
In your reply, you have at least 2 System, right?
S1 & S2.
Where S1 has BSP Application (Ex:/ FormRegistration)
And S2 is where you control the user and Function Module.
Do you put, generic user for all BSP Service in System S1?
You can create another BSP Application in System S1 (Ex:/ CallingFM)
but this time don't put default user in BSP Service.
And from BSP Application FormRegistration, you create 1 button to call the BSP Application CallingFM.
I will give you sample code:
FormRegistration: address:http://systemS1.sap.com/FormRegistration/page1.htm
HTML Part:
===========
<HTML>
<input type="button" value="Register the user" onclick="submitUser();">
<script>
   function submitUser(){
       document.forms[0].action = 'http://systemS1.sap.com/CallingFM/page1.htm';
       document.forms[0].target = '_new';
        //it will open new window, just put it empty if you don't want to open new window.
       document.forms[0].submit();
</script>
</HTML>
Now, when user click Button "Register the user" it will open the new window.
But because it doesn't allow you to using default user, it will prompt user id and password.
After that it will submit the data to CallingFM
Now in CallingFM we already have the sy-uname = user-B.
CallingFM: address-> http://systemS1.sap.com/CallingFM/page1.htm
OnInputProcessing Part:
=================
call function 'zcreate_user' destination 'S2'
Why you need CallingFM BSP application? because you need to re-assign sy-uname in S1 from default user with user-B ID, and use it to connect to System S2, S3, etc.
Please note: SM59 and User Id must be set before this.
Because when you call RFC from other destination, SAP will refer to Logon setting in SM59 for that destination.
Hope this will help you.

Creative Zen 8GB not keeping accurate time on cl

Hello, I am wondering if anyone else is experiencing problems with thier Creative Zen's (mine is an 8GB) not keeping accurate time on the digital clock on the player? My firmware is .2.0 by the way. I have a fully charged battery and noticed yesterday that the time on my clock was way off and needed to be set once more. So I set it correctly yesterday, now 24 hours later, the time is again way off...it thinks it's :6 pm even though it's 0:20 pm as I post this message.
I have noticed this several times previously and have adjusted the clock accordingly each time...this is not just a random incident.
I have used the player for several hours today but the battery still has lots of charge left and the unit functions correctly minus this time issue.
Any feedback or help would be appreciated.
Thanks,
Drew

I too hope that if others are having this problem that they would add their comments to this thread. I know this is a rather small issue, but it is annoying none the less. I mean otherwise my player is rock solid. Yes I could turn off the display of the clock and not rely on it at all (now I don't because it's always wrong) but that means I am settling for a product that does not work as advertised with ALL it's features working correctly. I am being kind of picky but I just want the product to function correctly... I don't think that's being too out of the ordinary with my expectations.
Anyhow, to make a long story short, I have been issued an RMA number and plan on sending the player off to Creative here in Canada.
I promised to post a follow-up with a copy of what Creative has sent me for correspondence in case others are interested. Oh and just to be complete, here are my answers to the suggested self-troubleshooting methods in the following email - yes I am running the latest firmware release and I am a clock setting professional now because I have done it so many times.
I have also searched this forum for other users who may be having this issue and I did not find too many (I found this interesting). So that is why I created this thread. I am starting to notice, at least at this time, a few others who are having similar experiences as I-yup I agree I am not the first to have problems with my MP3 player nor the last. Just was curious to see if this was a common problem or if I was the lucky one of the bunch or one that people just didn't bother to report...
Regardless everyone's feedback is appreciated and respected.
Anyhow here is their email:
Dear Drew,
Thank you for your contacting us at Creative Technical Support; we
appreciate the opportunity to assist you.
I understand that you are having some issues with your Zen player. The
device does not display the time correctly causing you to reset the time
frequently. I'm sorry for the inconvenience caused; allow me to offer
some possible solutions to this issue.
Prior to sending us an email, I believe you would have gone through some
basic troubleshooting steps for your player. If not, please refer to the
Knowledge Base article below:
How to Use and Troubleshoot Your Zen Player
http://us.creative.com/support/kb/ar...p?l=2&sid=4763
To begin, I would suggest you refer to the following Knowledge Base
article regarding setting the Time and Date on your Zen Player,
specifically the first part that deals with Zen players in general.
Changing Date, Time, Clock and Alarm On A ZEN Player
http://us.creative.com/support/kb/ar...p?l=2&sid=5638
Subsequently, you might wish to update your player's firmware to the
latest version. You may use the Recovery Tool to do so. Please follow
the link below:
http://www.creative.com/products/mp3...me.asp?region=
However, if the time on the player still does not display correctly, you
may need to schedule for a repair or replacement. Please note that your
product will be tested upon receipt and if no malfunction is found in
the product, it will be returned to you.
Please follow this link to have an RMA issued for your product:
http://us.creative.com/onlinerma
All applicable fees will be assessed at the time that your RMA is
processed in an effort to expedite the repair or replacement of your
product.
Thank you once again for contacting us. I hope the above articles are
able to address your concerns. In the mean time, perhaps you might be
interested in the Creative Aurvana In-Ear Earphones for your Zen player.
These earphones have been designed to block out 90% of ambient sound,
thus providing more precise audio reproduction. It would be a great
complement for your player. For more information about this product, do
have a look at our website
http://us.creative.com/products/prod...&WT.mc_id=3862
If you still require assistance, please reply to this email with any
previous correspondence to ensure the quickest and most accurate
service.
Best Regards,

Using the Active Directory login information by UNIX

We have 3 servers in our organisation: W2K + Exchange - members of one DOMAIN and Sun server with Solaris 8. All our clients have their login and password for the DOMAIN and the according the security policy they have to change their password periodically. Only a part of our clients have their login on the Solaris (they work using X-Terminal from their PC ).
My question is how can I receive and update automatically the login information on UNIX(Solaris) after updating on the Active Directory . Or how can I use the login information of the Active directory by Solaris

Are the configuration reports with the 0.0.0.0 being printed directly from the printer? A 0.0.0.0 address indicates the printer is not actually on the network (or at least not getting DHCP information from the router). The Print and Scan Doctor should not have been able to print to it unless it happened to be connected by a USB cable as well.
What brand and model is the router?
Is the wireless light a solid blue light or a flashing blue light?
You mentioned an Active Directory Domain Services error message. Outside of corporate networks, this is not an error message you should get. I suspect there might be a deeper software issue at fault. Please provide the exact steps you are using to add the printer to generate that error message.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Auditor reports not reporting accurate login information

Similar Messages

Maybe you are looking for