Auth setting for IT0006 lock record

Hi All,
Can anyone guide me how to set up authc object for locking IT0006 record through portal webdynpro address application?
I have following setup but i am getting "you have no authorization to insert" error message. I am not sure what we are missing in auth. If I use PZ02 (address) transaction in R/3 for same user, It's locking the record and working as expected. With same authorization if i use it in webdynpro address application.I am getting 'you do not have authorization to insert' error message.
Auth Object :P_ORGIN
INFTY : 0006
SUBTY: *
AUTHC: R
PERSA: *
PERSG: *
PERSK: *
VDSK1: *
Auth Object: P_PERNR
AUTHC: E
PSIGN: I
INFTY : 0006
SUBTY: *
If I use "Authc= R, W" in P_ORGIN, I am able to edit the record through portal but it is not locking the record.
Trace
AUTH
P_PERNR RC=4 AUTHC=W;PSIGN=*;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=W;PSIGN=E;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=W;PSIGN=I;INFTY=0006;SUBTY=1;
P_ORGIN RC=4 INFTY=0006;SUBTY=1;AUTHC=W;PERSA=;PERSG=;PERSK=;VDSK1=;
P_PERNR RC=4 AUTHC=W;PSIGN=*;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=W;PSIGN=E;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=W;PSIGN=I;INFTY=0006;SUBTY=1;
P_ORGIN RC=4 INFTY=0006;SUBTY=1;AUTHC=W;PERSA= ;PERSG= ;PERSK= ;VDSK1= ;
P_PERNR RC=4 AUTHC=E;PSIGN=*;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=E;PSIGN=E;INFTY=0006;SUBTY=1;
P_PERNR RC=0 AUTHC=E;PSIGN=I;INFTY=0006;SUBTY=1;
P_ORGIN RC=4 INFTY=0006;SUBTY=1;AUTHC=E;PERSA=;PERSG=;PERSK=;VDSK1=;
P_PERNR RC=4 AUTHC=D;PSIGN=*;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=D;PSIGN=E;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=D;PSIGN=I;INFTY=0006;SUBTY=1;
P_ORGIN RC=4 INFTY=0006;SUBTY=1;AUTHC=D;PERSA=;PERSG=;PERSK=;VDSK1=;
P_PERNR RC=4 AUTHC=D;PSIGN=*;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=D;PSIGN=E;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=D;PSIGN=I;INFTY=0006;SUBTY=1;
P_ORGIN RC=4 INFTY=0006;SUBTY=1;AUTHC=D;PERSA= ;PERSG= ;PERSK= ;VDSK1= ;
P_PERNR RC=4 AUTHC=S;PSIGN=*;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=S;PSIGN=E;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=S;PSIGN=I;INFTY=0006;SUBTY=1;
P_ORGIN RC=4 INFTY=0006;SUBTY=1;AUTHC=S;PERSA=;PERSG=;PERSK=;VDSK1=;
P_PERNR RC=4 AUTHC=S;PSIGN=*;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=S;PSIGN=E;INFTY=0006;SUBTY=1;
P_PERNR RC=4 AUTHC=S;PSIGN=I;INFTY=0006;SUBTY=1;
P_ORGIN RC=4 INFTY=0006;SUBTY=1;AUTHC=S;PERSA= ;PERSG= ;PERSK= ;VDSK1= ;
RFC 113719 HRXSS_PER_MODIFY Prog:SAPLHRXSS_PER_P0006_USRow:
RFC 336 HRXSS_PER_CHECK Prog:SAPLHRXSS_PER_MACRow:
Thanks!
Lakshmikandh

Similar Messages

Can validation check can be set for vendor master record .

Hi Experts ,
User wants to remove two existing payment methods,instead of removing i think to set validation for the vendor master record .
can validation can be set for vendor master record ?
PLease suggest me with advice.
Thanks
Pardha

Hi,
To my knowledge, validation can be set up for accounting document.
Though a work around, create a validation such that
Make the user enter the Payment method to be mandatorily entered by the user.
Also, restrict the unwanted payments as well in the same validation.
In case of APP also, the payment method in the document will take precedence.
Regards,
Sridevi

How to use cusomer exit to set month-revelant auth setting for reporting

Hi,
Our Client has a req regarding reporting authorization in BI2004s. They don't allow their employees' to view sales revenue and gross profit of LAST MONTH. But this restriction only effective in the beginning three days of each month.
We realize that we can activate setting "Auth revlevant" for Calendar Year month and restrict certain month for viewing data purpose. But if we want the auth req "data of last month not allowed in the beginning thress days of each month", can we do it with Customer exit for "Calendar year /Month"? If YES, can anyone please tell us how, or any better idea to solve this issue??
Thank you very much.
BR
Szu-Fen

HI hsing,
define custom defined month at taregt level.
Means, from Day3 of Month1 to Day2 of Month2 need to calculate as CM1 (Custom Month 1) and use this Custome Month for restiction.
If the InfoProvider already in production, not in a position to change the transformations, define a Virtual Key figure (VKF) in the InfoProvider and write customer exit on the key figure,
if calday <= day2 of Month1 VKF = 0,
else VKF = 1.
Display the records where VKF = 1.
Hope it will help you to find the solution for ur requirement.
Regards,
BVC
Message was edited by: BVC
B V C

Vixia HF M50 - Best setting for sports (basketball) recording

I have been recording for a couple of years with my camcorder. I think I have been using the default settings, at least I don't remember changing anything.
Last week, I had to record two games at the same time, so I had someone record with my Nikon digital camera in video mode and I recorded the other games as usual.
When compairing the two recordings, the video from my digital cameras has a lot better color. The file size is quiet a bit larger too.
Does anyone have a recommened setting for recording indoor basketball games.
Solved!
Go to Solution.

Hi cpuetz!
Thanks for the post.
Set the camcorder to the (M) Manual mode, then do the following:
Press FUNC
Select [Rec. Programs].
Select [SCN: Portrait].
Change the setting to [SCN: Sports].
Touch [X] to exit.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Project Setting for a SONY HXR_NX 30P camcorder in CS5.5.2 ???

Please advise the best setting for a Movie recording Format HD. MPEG-4 AVC/H.264 AVCHD FORMAT Ver. 2 compatible ?

The camera records avchd so pick a matching preset.
On a side note there are no project settings just sequence settings.

Error "Lock not set for: Generate index" while running process chain

SAP BI 7.0
SP 17
I am attempting to run a new process chain and the generate index steps are failing with the below errors:
"Lock NOT set forGenerate index"
"RSSM PROCESS INDEX terminated, because InfoCube/DSO object could not be locked."
The process chain just pauses. I let it finish once and it took 2 hours and then it gave the failure messages. I have looked in sm12 and can see the lock records when the process chain is running - unfortunately I can't make much of what's there - everything looks good to me. I also tried creating the indexes manually inside the cube and then re-ran, but still get the same error. Before running the process chain, I can get the indexes to check to green, but then after running the process chain they go back to red. I have attempted many things (including looking at other forum posts), but I still have the error. Please help. Thanks
Edited by: Brett Hutchinson on Feb 10, 2009 7:50 PM

Hello,
So Create index is getting failed in you PS right?
1)check if any other loads are running to the same CUBE(May be from other PC's also)
Goto Manage of the cube and check, some times it may happen if any Loads are running into cube I mean Load/DTP & roll up may be running.. if so wait till the others Loads(Jobs) get complete then Repeat the failed index
2) If the Create index is running for long time, then got RSDDV--> Select the CUBE then click on BIA index(Maintenance wizard), you can see a message if indexes are running , this will happen only when some one would have tried to generate the indexes manually and it may got failed due to some reason , since u are running it manually u couldn't identify whether it got failed or not unless you got to RSDDV and check. So delete the index here and then rebuild them through PC
Hope it helps!

How do I set up a lock code for my Nokia C2-02?

Hi, I have a used Nokia C2-02 phone from a seller on eBay.
I wish to protect my privacy so that other people cannot access my texts, etc.
When I go to 'settings', 'security', and click on 'access codes', in order to set up a lock code, the display says'change security code'.
When I ckick on it, I get a request for my security code.
Twice now I have keyed in'12345', which I take to be the default code.
Each time I get an error message and the second time it said that I have only one more chance to key in the correct code.
Perhaps the previous owner had a code, which I take to be the same as a security keyguard code.
When I go to 'device' in 'settings', it says that the security keyguard is off.
I can switch it on, but to activate it I again need to key in a code.
Am I corect in thinking that either someone has alrerady set up a code or the default code is not '12345'?
Also, What can I do to set up my own code?
Fianally, What if I use a pin code? Will that protect my privacy?
Do I have to get in touch with my network provider ( Tesco Mobile) in order to set it up?
I'd appreciate any help anyone can give,
Laurence
Solved!
Go to Solution.

If I used a pin code instead, would it protect my privacy?
would it stop those without the code reading my texts and so on?
PIN Code is basically for the SIM card and not the phone. Talking of privacy, your phone will be fully explorable if the SIM card is removed, so PIN scenario is pretty wasteful. Majority of the phones only ask for the PIN code when the phone is started and register the SIM to the network only wen PIN is furnished.
If It does not work I could find that I have locked the phone, which could necessitate sending it to the Nokia Care centre.
This is where the online free service may come in. It claims that it can find the security mastercode for any individual phone, based on the IMEI number, which you access by keying in asterisk, hash, 06, hash, or by taking the back off the phone and looking inside.
Armed with the 10-digit mastercode you key it in and it unlocks the phone.
That, at least, is the claim, but on another mastercode site there's a warning that the mastercode works only for older models.
I have my mastercode, but I don't know whether to take the chance.
Does anyone have any views on this?.
, Cheers, Laurence
Unfortunately, these type of Master Codes do not work. If ever they worked, the phones would become too easy to break in. As far as I can remember, I have not seen any person with a claim that one of those Master Codes worked for them. Maybe they worked for very very old 1st gen devices from Nokia, but not anymore. The security code is based on what user enters in the settings and there doesn't exist any master code to over-ride that. If it would, Nokia Care should be making use of that instead refurbishing/flashing the phones in every case that called for Keyguard Code.

I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

dont know what to do

I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

You can't "accidentally" put a passcode on any iPhone...its a multi-step process. Further, restoring an iPhone will remove the passcode, as the passcode is not included in an iPhone backup.
Are you sure you're talking about the phone passcode & not something else...like the "Restrictions" passcode?

Lock NOT set for: Archiving the data from a data target

Dear Expert,
I try to archive one of my info cube, when i start to write the Archive file the Free Space in the Archive folder not enough and it make the process error.
Then i try to changes the Archive folder to another path with enough free space. But when i start to write the archive file with new variant this error message came up :
==============================================================
An archiving run locks InfoProvider ZICCPS810 (archivation object BWCZICCP~0)
Lock NOT set for: Archiving the data from a data target
InfoProvider ZICCPS810 could not be locked for an archiving session
Job cancelled after system exception ERROR_MESSAGE
==============================================================
Please Help Me.
Wawan S

Hi Wawan,
If the earlier archive session resulted in error, please try to invalidate the earlier session in archive management and try running archive job again.
Hope this helps,
Naveen

Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

This is a little confusing since you say you have forgotten your password and then the system says you have not entered a password. Even with an Admin account you must have a password to install software.
If you are using Mac OS X 10.7 or above, you can change the admin password by restarting holding the Command and R keys, from the menu bar select Utilities, then Terminal. When the Terminal window opens, at the cursor type exactly:
resetpassword
and press Enter. When the Reset Password window opens, select the internal hard drive, and then the user account. Type a new password twice, leave the Hint blank, and then Save. Accept the next dialog that opens, and at the bottom of the Reset Password window agree to resetting the home directory permissions.
Quit the Reset Password window, go to the apple left side of the menu bar, Restart.
And you have a new password for your account.

How to build dynamic databases(record set) for mobile?

Hi All ,
i have an applocation that needs to personalize the data for users .
i have the data available , but dont know how to personalize it fot users to download special version of my application.
how to build dynamic databases(record set) for mobile?

In the load rule in the dimension build settings you would need to go to the tab dimension definition, choose the time dimension and right click on it. Select Edit properties. If you have not done so, set the dimension to be the time dimension. Then go to the generations/levels tab and set the generation names you need. For example if you want YTD, you would set the generation name to Year, if you want QTD set it to Quarter. You would set the number to the generation number that coorisponds to the generation. The DBAG has the list of names for all of the DTS members.

Highest Quality Recording Setting for Canon Vixia HF R500?

What is the Highest Quality Recording Setting for Canon Vixia HF R500?
Is it AVCHD 60P 28 Mbps or MP4 60P 35 Mbps?
Does the higher bit rate of the MP4 format mean that it is a higher quality recording or not?
Greg
Solved!
Go to Solution.

Hi Greg_Jay!
Thank you for posting.
The highest quality is MP4 60P 35 Mbps. Generally speaking, the higher the bit rate, the better the quality.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Recommendation for setting of Concurrent Lock

The documentation I've found regarding setting concurrent lock is not clear to me so I'm hoping more clarity will come from the forum. The scenario is the following. One of our cubes is for our plant and regional controllers. Within this application are the following dimensions:
Entity (E)
Account (A)
Plant (U)
Profit Center (U)
Category
DataSrc
Currency
Time
The only unique dimension between the users is Plant. Multiple users plan for the same entity, account, profit center, time, currency, etc.
Our current configuration for Concurrent Lock is
Entity
Account
Plant
Category
Time
Do we have the concurrent lock configured correctly? We think so but are not sure and are looking for a second, third, fourth opinion. The reasoning behind any recommendation you can provide will be very helpful in configuring concurrent lock for our other applications/cubes.

Hi Carlos,
As far as my understanding, you are correct in your observation. The unique dimension which is amongst the users is Plant. So if you want to go for concurrent locking and you select:
Entity
Account
Category
Time
then, if the users are selecting Plant as well in dimension and enter data, the first users' entry will be taken into consideration and rest of users' entries will be locked (ignored). Therefore, you need to select:
Entity
Account
Plant
Category
Time
for concurrent locking so that, other users are not getting locked while entering data.
Hope this clarifies further.
Regards,
Poonam

Customizing setting for parked documents of edit lock which are in workflow

Hi all,
I want to lock a parked document from edit while in workflow, I have seen in my previous project that if any document in workflow if try to change it used to give a message that 'document in wirkflow'. how to set this setting for parked documents using FIPP.
Thanks

Hi,
Please read note 169732.
It is normal that you get this errror message "Park document blocked xxxxxx" if you try to park a document for which "Release necessary" is set but "Released" flag is not set.
Normally in workflow the "Released" flag is set in a background step right before the workflow posts the documents.
regards
Waman

Auth setting for IT0006 lock record

Similar Messages

Maybe you are looking for