Authentication role on Windows Satellite not working
Hi,
I've configured my satellite servers with the content, imaging and
authentication role. After
analyzing traffic between the several sites, all workstations were
communicating directly with the primary server.
The client logs on the remote site all show :
[DEBUG] [04/23/2011 09:17:55.125] [1032] [ZenworksWindowsService] [129] []
[CommonCasa] [] [ Host: wsuszwl:2645] [] []
[DEBUG] [04/23/2011 09:17:55.125] [1032] [ZenworksWindowsService] [129] []
[CommonCasa] [] [ ServiceName: com.novell.zenworks.TMS_TREE] [] []
[DEBUG] [04/23/2011 09:17:56.000] [1032] [ZenworksWindowsService] [127] []
[SessionManager] [] [SessionLogonThread signaling TESS event: UserLogin] []
[DEBUG] [04/23/2011 09:17:56.000] [1032] [ZenworksWindowsService] [127]
[adminzwl] [SessionManager] [] [OnChange performing change event for session
396680129, with event: UserLogin] [] []
[DEBUG] [04/23/2011 09:17:56.000] [1032] [ZenworksWindowsService] [127] []
[Novell.Zenworks.Tess] [] [EventManager -- EventTrigger for UserLogin has
been called.] [] []
[DEBUG] [04/23/2011 09:17:56.000] [1032] [ZenworksWindowsService] [127] []
[Novell.Zenworks.Tess] [] [EventManager -- EventTrigger for UserLogin has
been called.] [] []
[DEBUG] [04/23/2011 09:17:56.000] [1032] [ZenworksWindowsService] [127]
[adminzwl] [SessionManager] [] [OnChange finished performing change event
for session 396680129, with event: UserLogin] [] []
[DEBUG] [04/23/2011 09:17:56.000] [1032] [ZenworksWindowsService] [127] []
[SessionManager] [] [SessionLogonThread finished signaling TESS event:
UserLogin] [] []
[DEBUG] [04/23/2011 09:17:56.140] [1032] [ZenworksWindowsService] [129] []
[CommonCasa] [] [ObtainAuthToken took exception: -939589602
System.Exception: -939589602
at Novell.Casa.Client.Auth.Authtoken.ObtainAuthToken( String sService,
String sHost, WinLuid luid)
wsuszwl is the satellite, running Windows 2003 server, ZEN 10.3.3 and WSUS.
WSUS default port has been changed to 8530. After this exception -939589602
, the client authenticates to the primary server, correctly following the
nearest server rules.
I checked if something was listening on port 2645 on the satellite and it
was not. On the primary server port 2645 is listening, checked via
https://server:2645/CasaAuthTokenSvc/
I've enabled Casa logging on the satellite, below a few lines from that log.
Am I missing something here? I'm confused, because while configuring the
authentication role of the satellite, ZCM tells you it's using port 443 for
authentication. But it seems it's using port 2645?
And I can't find any ZEN service not running on the satellite. The ZEN
agent on the satellite shows under Satellite Role Status : Authentication
Enabling. As if it's trying to enbele the roles, but it's not succeeding.
I found some stuff while googlng that told me it would not be possible to
use the authentication role on Windows bases satellites, only on linux
based. But that was a pretty old article.
Thanks for any help
Ron
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenEx- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenInt- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenInt- ServiceName =
com.novell.zenworks.TMS_TREE
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenInt- HostName =
wsuszwl:443
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenInt- BufferLength = 0
[1668-1BB4] [09:15:58] CASA_AuthToken -FindAuthTokenEntryInCache- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -FindAuthTokenCacheEntry- Key =
com.novell.zenworks.TMS_TREE@wsuszwl
[1668-1BB4] [09:15:58] CASA_AuthToken -FindAuthTokenCacheEntry- Keysize = 37
[1668-1BB4] [09:15:58] CASA_AuthToken -FindAuthTokenCacheEntry-
CredStoreScope = 16266C0
[1668-1BB4] [09:15:58] CASA_AuthToken -FindAuthTokenEntryInCache- End,
pEntry = 0x0
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenFromServer- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenFromServer- Hostname =
wsuszwl
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenFromServer- port = 443
[1668-1BB4] [09:15:58] CASA_AuthToken -OpenRpcSession- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -OpenRpcSession- Host = wsuszwl
[1668-1BB4] [09:15:58] CASA_AuthToken -OpenRpcSession- HostPort = 443
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyMultiToWideAlloc- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyMultiToWideAlloc- End, retStatus
= 00000000
[1668-1BB4] [09:15:58] CASA_AuthToken -OpenRpcSession- End, pSession =
05F94F98
[1668-1BB4] [09:15:58] CASA_AuthToken -BuildGetAuthPolicyMsg- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -BuildGetAuthPolicyMsg- End, pMsg =
0x5F94FB0
[1668-1BB4] [09:15:58] CASA_AuthToken -Rpc- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -InternalRpc- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyMultiToWideAlloc- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyMultiToWideAlloc- End, retStatus
= 00000000
[1668-1BB4] [09:15:58] CASA_AuthToken -InternalRpc- before
WinHttpOpenRequest
[1668-1BB4] [09:15:58] CASA_AuthToken -InvalidCertsFromHostAllowed- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -InvalidCertsFromHostAllowed- End,
retStatus = 0
[1668-1BB4] [09:15:58] CASA_AuthToken -SecureFailureStatusCallback- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -SecureFailureStatusCallback- End
[1668-1BB4] [09:15:58] CASA_AuthToken -InternalRpc- Secure connection
failure, flags = 10
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyWideToMultiAlloc- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyWideToMultiAlloc- End, retStatus
= 00000000
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyWideToMultiAlloc- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyWideToMultiAlloc- End, retStatus
= 00000000
[1668-1BB4] [09:15:58] CASA_AuthToken -UserApprovedCert- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -UserApprovedCert- Invalid Cert from
Host = wsuszwl
[1668-1BB4] [09:15:58] CASA_AuthToken -InternalRpc- User approved invalid
certificate from wsuszwl
[1668-1BB4] [09:15:58] CASA_AuthToken -AllowInvalidCertsFromHost- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -AllowInvalidCertsFromHost-
X509_ASN_ENCODING
[1668-1BB4] [09:15:58] CASA_AuthToken -AllowInvalidCertsFromHost- Entered to
iterate the cert list
[1668-1BB4] [09:15:58] CASA_AuthToken -AllowInvalidCertsFromHost- End,
retStatus = 0
[1668-1BB4] [09:15:58] CASA_AuthToken -InternalRpc- End, retStatus = 0
[1668-1BB4] [09:15:58] CASA_AuthToken -Rpc- End, retStatus = 0
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenFromServer- Did not
receive GetAuthPolicy Response data
[1668-1BB4] [09:15:58] CASA_AuthToken -CloseRpcSession- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -CloseRpcSession- End
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenFromServer- End,
retStatus = C7FF0020
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenInt- End, retStatus =
C7FF0020
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenEx- End, retStatus =
C7FF0020
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenEx- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenInt- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenInt- ServiceName =
com.novell.zenworks.TMS_TREE
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenInt- HostName =
wsuszwl:2645
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenInt- BufferLength = 0
[1668-1BB4] [09:15:58] CASA_AuthToken -FindAuthTokenEntryInCache- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -FindAuthTokenCacheEntry- Key =
com.novell.zenworks.TMS_TREE@wsuszwl
[1668-1BB4] [09:15:58] CASA_AuthToken -FindAuthTokenCacheEntry- Keysize = 37
[1668-1BB4] [09:15:58] CASA_AuthToken -FindAuthTokenCacheEntry-
CredStoreScope = 162DAF4
[1668-1BB4] [09:15:58] CASA_AuthToken -FindAuthTokenEntryInCache- End,
pEntry = 0x0
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenFromServer- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenFromServer- Hostname =
wsuszwl
[1668-1BB4] [09:15:58] CASA_AuthToken -ObtainAuthTokenFromServer- port =
2645
[1668-1BB4] [09:15:58] CASA_AuthToken -OpenRpcSession- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -OpenRpcSession- Host = wsuszwl
[1668-1BB4] [09:15:58] CASA_AuthToken -OpenRpcSession- HostPort = 2645
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyMultiToWideAlloc- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyMultiToWideAlloc- End, retStatus
= 00000000
[1668-1BB4] [09:15:58] CASA_AuthToken -OpenRpcSession- End, pSession =
05F94F98
[1668-1BB4] [09:15:58] CASA_AuthToken -BuildGetAuthPolicyMsg- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -BuildGetAuthPolicyMsg- End, pMsg =
0x5F94FB0
[1668-1BB4] [09:15:58] CASA_AuthToken -Rpc- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -InternalRpc- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyMultiToWideAlloc- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -CopyMultiToWideAlloc- End, retStatus
= 00000000
[1668-1BB4] [09:15:58] CASA_AuthToken -InternalRpc- before
WinHttpOpenRequest
[1668-1BB4] [09:15:58] CASA_AuthToken -InvalidCertsFromHostAllowed- Start
[1668-1BB4] [09:15:58] CASA_AuthToken -InvalidCertsFromHostAllowed- End,
retStatus = 0
[1668-1BB4] [09:15:59] CASA_AuthToken -InternalRpc- Unable to connect to
server
[1668-1BB4] [09:15:59] CASA_AuthToken -InternalRpc- End, retStatus =
C7FF001E
[1668-1BB4] [09:15:59] CASA_AuthToken -Rpc- End, retStatus = C7FF001E
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenFromServer-
GetAuthPolicy Rpc failure, error = C7FF001E
[1668-1BB4] [09:15:59] CASA_AuthToken -CloseRpcSession- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -CloseRpcSession- End
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenFromServer- End,
retStatus = C7FF001E
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenInt- End, retStatus =
C7FF001E
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenEx- End, retStatus =
C7FF001E
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenEx- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenInt- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenInt- ServiceName =
com.novell.zenworks.TMS_TREE
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenInt- HostName =
zentms1.tmsnet.org:443
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenInt- BufferLength = 0
[1668-1BB4] [09:15:59] CASA_AuthToken -FindAuthTokenEntryInCache- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -FindAuthTokenCacheEntry- Key =
[email protected]
[1668-1BB4] [09:15:59] CASA_AuthToken -FindAuthTokenCacheEntry- Keysize = 48
[1668-1BB4] [09:15:59] CASA_AuthToken -FindAuthTokenCacheEntry-
CredStoreScope = 1638FD4
[1668-1BB4] [09:15:59] CASA_AuthToken -FindAuthTokenEntryInCache- End,
pEntry = 0x0
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenFromServer- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenFromServer- Hostname =
zentms1.tmsnet.org
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainAuthTokenFromServer- port = 443
[1668-1BB4] [09:15:59] CASA_AuthToken -OpenRpcSession- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -OpenRpcSession- Host =
zentms1.tmsnet.org
[1668-1BB4] [09:15:59] CASA_AuthToken -OpenRpcSession- HostPort = 443
[1668-1BB4] [09:15:59] CASA_AuthToken -CopyMultiToWideAlloc- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -CopyMultiToWideAlloc- End, retStatus
= 00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -OpenRpcSession- End, pSession =
05F94ED8
[1668-1BB4] [09:15:59] CASA_AuthToken -BuildGetAuthPolicyMsg- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -BuildGetAuthPolicyMsg- End, pMsg =
0x5F94FB0
[1668-1BB4] [09:15:59] CASA_AuthToken -Rpc- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -InternalRpc- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -CopyMultiToWideAlloc- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -CopyMultiToWideAlloc- End, retStatus
= 00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -InternalRpc- before
WinHttpOpenRequest
[1668-1BB4] [09:15:59] CASA_AuthToken -InvalidCertsFromHostAllowed- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -InvalidCertsFromHostAllowed- End,
retStatus = 0
[1668-1BB4] [09:15:59] CASA_AuthToken -InternalRpc- End, retStatus = 0
[1668-1BB4] [09:15:59] CASA_AuthToken -Rpc- End, retStatus = 0
[1668-1BB4] [09:15:59] CASA_AuthToken -CreateGetAuthPolicyResp- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespStartElementHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespStartElementHandler-
End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespStartElementHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespStartElementHandler-
End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespStartElementHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespStartElementHandler-
End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespEndElementHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespEndElementHandler-
End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConsumeElementData- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConsumeElementData- End, retStatus =
00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespEndElementHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespEndElementHandler-
End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespStartElementHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespStartElementHandler-
End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConsumeElementData- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConsumeElementData- End, retStatus =
00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespEndElementHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespEndElementHandler-
End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespEndElementHandler-
Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthPolicyRespEndElementHandler-
End
[1668-1BB4] [09:15:59] CASA_AuthToken -CreateGetAuthPolicyResp- End,
retStatus = 00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -CreateAuthPolicy- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -DecodeData- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -DecodeData- End, retStatus = 0
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyStartElementHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyStartElementHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyStartElementHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyStartElementHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyStartElementHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyStartElementHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConsumeElementData- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConsumeElementData- End, retStatus =
00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyEndElementHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyEndElementHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyStartElementHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyStartElementHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConsumeElementData- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConsumeElementData- End, retStatus =
00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyEndElementHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyEndElementHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyStartElementHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyStartElementHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConsumeElementData- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConsumeElementData- End, retStatus =
00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyEndElementHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyEndElementHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyEndElementHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyEndElementHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyCharDataHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyEndElementHandler- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -AuthPolicyEndElementHandler- End
[1668-1BB4] [09:15:59] CASA_AuthToken -CreateAuthPolicy- End, retStatus =
00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -ObtainSessionToken- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -FindSessionTokenEntryInCache- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -FindSessionTokenCacheEntry- Key =
TMS_TREE
[1668-1BB4] [09:15:59] CASA_AuthToken -FindSessionTokenCacheEntry- Keysize =
9
[1668-1BB4] [09:15:59] CASA_AuthToken -FindSessionTokenCacheEntry-
CredStoreScope = 1638FD4
[1668-1BB4] [09:15:59] CASA_AuthToken -FindSessionTokenEntryInCache- End,
pEntry = 0x0
[1668-1BB4] [09:15:59] CASA_AuthToken -FindSessionTokenEntryInCache- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -FindSessionTokenCacheEntry- Key =
TMS_TREE
[1668-1BB4] [09:15:59] CASA_AuthToken -FindSessionTokenCacheEntry- Keysize =
9
[1668-1BB4] [09:15:59] CASA_AuthToken -FindSessionTokenCacheEntry-
CredStoreScope = 1638FD4
[1668-1BB4] [09:15:59] CASA_AuthToken -FindSessionTokenEntryInCache- End,
pEntry = 0x0
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthMechToken- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthTokenIf- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetConfigInterface- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -GetConfigInterface- End, retStatus =
00000000
[1668-1BB4] [09:15:59] CASA_PwdMech -AuthTokenIf_AddReference- Start
[1668-1BB4] [09:15:59] CASA_PwdMech -AuthTokenIf_AddReference- End, refCount
= 2
[1668-1BB4] [09:15:59] CASA_AuthToken -ConfigIf_ReleaseReference- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -ConfigIf_ReleaseReference- End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthTokenIf- End, retStatus =
00000000
[1668-1BB4] [09:15:59] CASA_PwdMech -AuthTokenIf_GetAuthToken- Start
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- Start
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- Realm = TMS_TREE
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- CredStoreScope =
1638FD4
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- RealmCredsOnly = 1
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- Username =
Administrator
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- End, retStatus = 0
[1668-1BB4] [09:15:59] CASA_PwdMech -EncodeData- Start
[1668-1BB4] [09:15:59] CASA_PwdMech -EncodeData- End, retStatus = 0
[1668-1BB4] [09:15:59] CASA_PwdMech -AuthTokenIf_GetAuthToken- End,
retStatus = C7FD0006
[1668-1BB4] [09:15:59] CASA_PwdMech -AuthTokenIf_GetAuthToken- Start
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- Start
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- Realm = TMS_TREE
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- CredStoreScope =
1638FD4
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- RealmCredsOnly = 1
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- Username =
Administrator
[1668-1BB4] [09:15:59] CASA_PwdMech -GetUserCredentials- End, retStatus = 0
[1668-1BB4] [09:15:59] CASA_PwdMech -EncodeData- Start
[1668-1BB4] [09:15:59] CASA_PwdMech -EncodeData- End, retStatus = 0
[1668-1BB4] [09:15:59] CASA_PwdMech -AuthTokenIf_GetAuthToken- End,
retStatus = 00000000
[1668-1BB4] [09:15:59] CASA_PwdMech -AuthTokenIf_ReleaseReference- Start
[1668-1BB4] [09:15:59] CASA_PwdMech -AuthTokenIf_ReleaseReference- End
[1668-1BB4] [09:15:59] CASA_AuthToken -GetAuthMechToken- End, retStatus =
00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -BuildAuthenticateMsg- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -BuildAuthenticateMsg- End, pMsg =
0x5F95DE8
[1668-1BB4] [09:15:59] CASA_AuthToken -Rpc- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -InternalRpc- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -CopyMultiToWideAlloc- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -CopyMultiToWideAlloc- End, retStatus
= 00000000
[1668-1BB4] [09:15:59] CASA_AuthToken -InternalRpc- before
WinHttpOpenRequest
[1668-1BB4] [09:15:59] CASA_AuthToken -InvalidCertsFromHostAllowed- Start
[1668-1BB4] [09:15:59] CASA_AuthToken -InvalidCertsFromHostAllowed- End,
retStatus = 0
[1668-1BB4] [09:15:59] CASA_AuthToken -InternalRpc- End, retStatus = 0
Rvd,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Similar Messages
-
Adobe Bridge CS5 in windows 7 not working?
Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager -
Why the buttons created by Acrobat XI in window do not work in android mobile or ipod touch?
Why the buttons created by Acrobat XI in window do not work in android mobile or ipod touch?
Hi,
Could you please send us a test file which has those form buttons? Please email that file to us at DL-adobereader-android <[email protected]>
Thanks,
- Reader Mobile team -
Popups: Navigation from view to window does not work
Hi,
I open a second window as popup. This window has 2 views embedded, displaying view1 first. On some actions I would like to navigate to view2.
Defining an outbound plug on view1 and an inbound plug on view2, connecting them and firing the outbound withith the onaction works absolutely fine.
However, for some reasons I would like to avoid a direct navigation, but would like to navigate from view1 to the popupo window and from there to view2 (or maybe another view, ofcourse also embedded in the same popup window). Unfortunately I fail on this scenario - I can fire the view-to-window plug, but the destination on the window side (handle in method) is never reached.
Since the same concept works fine on non-popup windows I wonder whether a navigation from view to embedded window does not work for popups?
Any idea?Hi Yashpal,
no, just one window.
The first link is view1 -> window, the second window -> view2.
I.e., I fire in the view the outbound plug, which is connected with its window.
In the window I fire an outbound plug, which is connected to view2.
In theory this should work - for non-popup windows I do not have any problem at all, however, for popup windows the navigation from view1 to the window is not processed.
In the meantime I played a little bit further: Instead of firing a navigation from view1, I now fire an event defined in the component contoller, on which an event method is registered within the window. Doing so, I reach the window, which I didn't reach via the navigation link. Once in the window, firing to view2 works just fine ...
Hope the issue is a bit clearer now. Also I found a solution, I am surprised that the simpler way via navigation does not work. -
iTunes drag to import new songs in library or to create playlists from folders on windows does not work!
WHY? I have to solve, how can I do? Thank youup
-
Same issue Network Discovery not working and Windows Update not working
I've read the threads.
This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
Everything was working before. I tried all of the recommended services turning on restarting.
Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
I don't have the NetBIOS over tcp/ip in my services?
I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients.
Thank YouHi,
If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
When you turn on network discovery, do you get any error prompt?
Please check if you have any error message about network discovery in event viewer.
Open Event Viewer
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
What information appears in event logs (Event Viewer)?
http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
Also, please temporarily turn off your firewall and all the security programs for a test.
As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness, Remote Procedure Call (RPC), Function Discovery
Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
You should check again if you have started all these services.
Regarding the update issue, I suggest you try the following suggestions.
1. Temporarily disable firewall and antivirus program to test the issue.
2. Open the Windows Update troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
3. Reset Windows Update components
http://support.microsoft.com/kb/971058
You may follow the steps from the link below to fix the issue.
Windows Update Not Working.
http://support.microsoft.com/kb/555989
You may also see the common Windows Updates troubleshooting guide.
Fix Microsoft Windows Update Issues
http://support.microsoft.com/kb/906602
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I have installed BootCamp 5.1 and Windows updates not working because it extract files on Mac partition before installation. Is there any workaround for same ?
To replicate this issue - Try to download .net framework 4.5 from microsoft website and than run that setup on windows partition.
Before installation. it will first extract all the binaries to a other drivers, since in my case other primary drive is E which is a Mac partition so it always give me an error while extractiing and therefore setup is not able to execute propely.
Let me try to get the screen shot of error and send it here. -
NAC SSO in Windows 7 not Working
Hello,
I'm having problems with SSO process on workstations with Windows 7 and I need help to solve it.
ENVIRONMENT:
Clean Access Manager: 4.9.0
Clean Access Server: 4.9.0
Clean Access Agent: 4.9.0.33
Compliance Module: 3.4.27.1
Windows Domain : Windows 2003 Server Full Functional Level
Status of Active Directory SSO: Started
More Informations:
In Windows Domain Controller, i ran the follow command with no errors:
ktpass –princ NAC_USER/[email protected] -mapuser NAC_USER –pass mypass –out c:\nac_user.keytab –ptype KRB5_NT_PRINCIPAL
The file nac_user.keytab was created in c:\ of DC.
in Windows XP Workstations, SSO is working correctly
in Windows 7 workstations work when i manually enable DES in "Start > Control Panel > System and Security > Administrative Tools > Local Security Policy > Local Policies/Security > Options > Network security > Configure encryption types allowed"
I have many workstations running Windows 7 and can not do this manual procedure in all of them.
running tail -f /perfigo/access/tomcat/logs/nac_server.log command in CAS, i see the follow messages during an attempt to do SSO with unchanged Windows 7:
2012-03-09 11:45:21.231 +0100 RMI TCP Connection(481)-10.5.32.248 WARN com.perfigo.wlan.jmx.adsso.GSSServer - Server was not running ...
2012-03-09 11:45:21.231 +0100 RMI TCP Connection(481)-10.5.32.248 INFO com.perfigo.wlan.jmx.adsso.GSSServer - Server starting server ...
2012-03-09 11:45:21.329 +0100 RMI TCP Connection(481)-10.5.32.248 INFO com.perfigo.wlan.jmx.adsso.GSSServer - Server is now running ...
2012-03-09 11:45:21.329 +0100 Thread-88 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - SPN : [NAC_USER/[email protected]]
2012-03-09 11:45:21.329 +0100 Thread-88 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - building kdc list for domain mydomain.net
2012-03-09 11:45:21.469 +0100 Thread-88 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - done building kdc list for domain mydomain.net
2012-03-09 11:45:21.469 +0100 Thread-88 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - KDC(s) :[srvslsdc001.mydomain.net, srvpnpdc001.mydomain.net, srvpnpdc002.mydomain.net, srvalvdc001.mydomain.net, srvtatdco001.mydomain.net, srvtatdco002.mydomain.net, srvpaldc002.mydomain.net, srvmurdc001.mydomain.net, srvnundc001.mydomain.net]
2012-03-09 11:45:21.469 +0100 Thread-88 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2012-03-09 11:45:21.469 +0100 Thread-88 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2012-03-09 11:45:21.470 +0100 Thread-88 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - creating login context ...
2012-03-09 11:45:21.470 +0100 Thread-88 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - created login context ...javax.security.auth.login.LoginContext@b55e97
2012-03-09 11:45:21.631 +0100 Thread-88 INFO com.perfigo.wlan.jmx.adsso.GSSServer - Notifying GSSServer status Started
2012-03-09 11:45:21.807 +0100 Thread-88 DEBUG com.perfigo.wlan.jmx.adsso.GSSServer - accepting ADSSO socket ...
2012-03-09 11:45:42.285 +0100 10.5.112.140 SWissServer Thread INFO com.perfigo.wlan.jmx.swiss.SWissUtil - opswat=3.5.2.1 dm_opswat=3.5.2.1
2012-03-09 11:45:42.329 +0100 10.5.112.140 SWissServer Thread INFO com.perfigo.wlan.jmx.swiss.SWissUtil - SWissServer: OPSWAT SDK Path=https://10.5.33.10/perfigo_download/CCAA/opswat-win.zip
As we can see, I restarted the AD SSO service and the two bold lines are the records while trying to SSO with Windows 7, but without success.
NAC Agent pop-up request for manual authentication.
does anyone know how to solve this trouble?
If you need more information please let me know .....
Regards,
Daniel StefaniHi Guys,
When I changed the files /perfigo/access/tomcat/conf/krb.txt and /perfigo/access/bin/starttomcat in CAS according to the configuration guide:
/perfigo/access/tomcat/conf/krb.txt
[libdefaults]
kdc_timeout = 20000
default_tkt_enctypes = RC4-HMAC
default_tgs_enctypes = RC4-HMAC
permitted_enctypes = RC4-HMAC
and
/perfigo/access/bin/starttomcat
CATALINA_OPTS="-server ... -DKRB_OVERRIDE=true"
an error was generated in nac_server.log when i tried run SSO Service.
ERROR:
2012-03-07 11:52:50.655 +0100 Thread-77 ERROR com.perfigo.wlan.jmx.adsso.GSSServer - Unable to start server ... KDC has no support for encryption type (14)
But I remembered that during the changes, I checked the options for the user account I'm using to run the service to Use DES encryption types for this account.
When i uncheck this option in user account options and kept the changes to files krb.txt and starttomcat, the SSO service started with no errors and Windows 7 users now do the SSO too.
tks,
Daniel Stefani -
Authentication Host-Mode Multi-Auth not working
hi
In my lab environment I configured 802.1x with "Multi-Auth" mode for multiple clients on a single protected port to be authenticated agains Microsoft NPS AAA server.
Switch ports configured with Single-Host or Mult-Host options are working fine but "Multi-Auth" mode its not working. My hardware details and configurations are as follows
Catalyst Model = WS-C2960S-24TSL running IOS 12.2(55)SE2
Current configuration : 10423 bytes
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
aaa new-model
aaa group server radius NPS
server-private x.x.x.x auth-port 1645 acct-port 1646 key <removed>
aaa authentication dot1x default group NPS
aaa authorization network default group NPS
aaa session-id common
switch 1 provision ws-c2960s-24ts-l
authentication mac-move permit
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface GigabitEthernet1/0/1
switchport access vlan 5
switchport mode access
authentication order dot1x webauth
authentication priority dot1x webauth
authentication port-control auto
authentication timer reauthenticate 7200
authentication violation protect
dot1x pae authenticator
spanning-tree portfast
interface GigabitEthernet1/0/5
switchport access vlan 5
switchport mode access
switchport voice vlan 98
authentication host-mode multi-auth
authentication order dot1x mab webauth
authentication priority dot1x
authentication port-control auto
dot1x pae authenticator
interface GigabitEthernet1/0/7
switchport access vlan 5
switchport mode access
authentication host-mode multi-host
authentication order dot1x webauth
authentication priority dot1x webauth
authentication port-control auto
authentication timer reauthenticate 7200
authentication violation protect
dot1x pae authenticator
spanning-tree portfast
interface Vlan5
ip address x.x.x.x x.x.x.x
interface Vlan98
no ip address
radius-server vsa send accounting
radius-server vsa send authentication
end
My debug log for Authentication, dot1x and AAA is as follows.
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) dot1x_pm_mda_port_link_linkcomingup: voice VLAN 98, data VLAN 5
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Setting domain ALL to UNATHED
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Host access set to ask on unauthorized port since feature
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) host access set to 1 on GigabitEthernet1/0/5
*Mar 1 01:58:51.354: dot1x-ev(Gi1/0/5): Interface state changed to UP
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Enabling dot1x in switch shim
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Host access set to ask on unauthorized port since feature
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) host access set to 1 on GigabitEthernet1/0/5
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Host access set to ask on unauthorized port since feature
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) host access set to 1 on GigabitEthernet1/0/5
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Received clear security violation
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Received clear security violation
*Mar 1 01:58:51.354: AUTH-EVENT (Gi1/0/5) Link UP
*Mar 1 01:58:51.360: AAA/BIND(00000004): Bind i/f
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Assigned AAA ID 0x00000004
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Retrieved Accounting Session ID 0x00000004
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Allocated new Auth Manager context (handle 0x83000002)
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Initialising Method dot1x state to 'Not run'
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Adding method dot1x to runnable list for Auth Mgr context 0x
*Mar 1 01:58:51.360: AUTH-EVENT: auth_mgr_idc_add_record: Recv audit_sid=0000000000000002006CD0E0
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Sending START to dot1x (handle 0x83000002)
*Mar 1 01:58:51.360: dot1x_auth Gi1/0/5: initial state auth_initialize has enter
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_initialize_enter called
*Mar 1 01:58:51.360: dot1x_auth Gi1/0/5: during state auth_initialize, got event 0(cfg_auto)
*Mar 1 01:58:51.360: @@@ dot1x_auth Gi1/0/5: auth_initialize -> auth_disconnected
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_disconnected_enter called
*Mar 1 01:58:51.360: dot1x_auth Gi1/0/5: idle during state auth_disconnected
*Mar 1 01:58:51.360: @@@ dot1x_auth Gi1/0/5: auth_disconnected -> auth_restart
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_restart_enter called
*Mar 1 01:58:51.360: dot1x-ev(Gi1/0/5): Sending create new context event to EAP for 0x4100002D (0000.0000.0000)
*Mar 1 01:58:51.360: dot1x_auth_bend Gi1/0/5: initial state auth_bend_initialize has enter
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_initialize_enter called
*Mar 1 01:58:51.360: dot1x_auth_bend Gi1/0/5: initial state auth_bend_initialize has idle
*Mar 1 01:58:51.360: dot1x_auth_bend Gi1/0/5: during state auth_bend_initialize, got event 16383(idle)
*Mar 1 01:58:51.360: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_initialize -> auth_bend_idle
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_idle_enter called
*Mar 1 01:58:51.360: dot1x-ev(Gi1/0/5): Created a client entry (0x4100002D)
*Mar 1 01:58:51.360: dot1x-ev(Gi1/0/5): Dot1x authentication started for 0x4100002D (0000.0000.0000)
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Received handle 0x4100002D from method
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Context changing state from 'Idle' to 'Running'
*Mar 1 01:58:51.360: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Method dot1x changing state from 'Not run' to 'Running'
*Mar 1 01:58:51.360: dot1x-ev:DOT1X Supplicant not enabled on GigabitEthernet1/0/5
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): Posting !EAP_RESTART on Client 0x4100002D
*Mar 1 01:58:51.360: dot1x_auth Gi1/0/5: during state auth_restart, got event 6(no_eapRestart)
*Mar 1 01:58:51.360: @@@ dot1x_auth Gi1/0/5: auth_restart -> auth_connecting
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_connecting_enter called
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): 0x4100002D:auth_restart_connecting_action called
*Mar 1 01:58:51.360: dot1x-sm(Gi1/0/5): Posting RX_REQ on Client 0x4100002D
*Mar 1 01:58:51.365: dot1x_auth Gi1/0/5: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
*Mar 1 01:58:51.365: @@@ dot1x_auth Gi1/0/5: auth_connecting -> auth_authenticating
*Mar 1 01:58:51.365: dot1x-sm(Gi1/0/5): 0x4100002D:auth_authenticating_enter called
*Mar 1 01:58:51.365: dot1x-sm(Gi1/0/5): 0x4100002D:auth_connecting_authenticating_action called
*Mar 1 01:58:51.365: dot1x-sm(Gi1/0/5): Posting AUTH_START for 0x4100002D
*Mar 1 01:58:51.365: dot1x_auth_bend Gi1/0/5: during state auth_bend_idle, got event 4(eapReq_authStart)
*Mar 1 01:58:51.365: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_idle -> auth_bend_request
*Mar 1 01:58:51.365: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_enter called
*Mar 1 01:58:51.365: dot1x-ev(Gi1/0/5): Sending EAPOL packet to group PAE address
*Mar 1 01:58:51.365: dot1x-ev(Gi1/0/5): Role determination not required
*Mar 1 01:58:51.365: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 1 01:58:51.365: dot1x-ev(Gi1/0/5): Sending out EAPOL packet
*Mar 1 01:58:51.365: EAPOL pak dump Tx
*Mar 1 01:58:51.365: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 1 01:58:51.365: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 1 01:58:51.365: dot1x-packet(Gi1/0/5): EAPOL packet sent to client 0x4100002D (0000.0000.0000)
*Mar 1 01:58:51.365: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_idle_request_action called
*Mar 1 01:58:53.352: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/5, changed state to up
*Mar 1 01:58:54.353: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/5, changed state to up
*Mar 1 01:59:22.188: dot1x-sm(Gi1/0/5): Posting EAP_REQ for 0x4100002D
*Mar 1 01:59:22.188: dot1x_auth_bend Gi1/0/5: during state auth_bend_request, got event 7(eapReq)
*Mar 1 01:59:22.188: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_request -> auth_bend_request
*Mar 1 01:59:22.188: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_request_action called
*Mar 1 01:59:22.188: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_enter called
*Mar 1 01:59:22.188: dot1x-ev(Gi1/0/5): Sending EAPOL packet to group PAE address
*Mar 1 01:59:22.188: dot1x-ev(Gi1/0/5): Role determination not required
*Mar 1 01:59:22.188: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 1 01:59:22.188: dot1x-ev(Gi1/0/5): Sending out EAPOL packet
*Mar 1 01:59:22.188: EAPOL pak dump Tx
*Mar 1 01:59:22.188: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 1 01:59:22.188: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 1 01:59:22.188: dot1x-packet(Gi1/0/5): EAPOL packet sent to client 0x4100002D (0000.0000.0000)
*Mar 1 01:59:53.016: dot1x-sm(Gi1/0/5): Posting EAP_REQ for 0x4100002D
*Mar 1 01:59:53.016: dot1x_auth_bend Gi1/0/5: during state auth_bend_request, got event 7(eapReq)
*Mar 1 01:59:53.016: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_request -> auth_bend_request
*Mar 1 01:59:53.016: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_request_action called
*Mar 1 01:59:53.016: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_enter called
*Mar 1 01:59:53.016: dot1x-ev(Gi1/0/5): Sending EAPOL packet to group PAE address
*Mar 1 01:59:53.016: dot1x-ev(Gi1/0/5): Role determination not required
*Mar 1 01:59:53.016: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 1 01:59:53.016: dot1x-ev(Gi1/0/5): Sending out EAPOL packet
*Mar 1 01:59:53.016: EAPOL pak dump Tx
*Mar 1 01:59:53.016: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 1 01:59:53.016: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 1 01:59:53.016: dot1x-packet(Gi1/0/5): EAPOL packet sent to client 0x4100002D (0000.0000.0000)
*Mar 1 02:00:23.844: dot1x-ev(Gi1/0/5): Received an EAP Timeout
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): Posting EAP_TIMEOUT for 0x4100002D
*Mar 1 02:00:23.844: dot1x_auth_bend Gi1/0/5: during state auth_bend_request, got event 12(eapTimeout)
*Mar 1 02:00:23.844: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_request -> auth_bend_timeout
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_timeout_enter called
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_request_timeout_action called
*Mar 1 02:00:23.844: dot1x_auth_bend Gi1/0/5: idle during state auth_bend_timeout
*Mar 1 02:00:23.844: @@@ dot1x_auth_bend Gi1/0/5: auth_bend_timeout -> auth_bend_idle
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): 0x4100002D:auth_bend_idle_enter called
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): Posting AUTH_TIMEOUT on Client 0x4100002D
*Mar 1 02:00:23.844: dot1x_auth Gi1/0/5: during state auth_authenticating, got event 14(authTimeout)
*Mar 1 02:00:23.844: @@@ dot1x_auth Gi1/0/5: auth_authenticating -> auth_authc_result
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): 0x4100002D:auth_authenticating_exit called
*Mar 1 02:00:23.844: dot1x-sm(Gi1/0/5): 0x4100002D:auth_authc_result_enter called
*Mar 1 02:00:23.844: %DOT1X-5-FAIL: Authentication failed for client (Unknown MAC) on Interface Gi1/0/5 AuditSessionID
*Mar 1 02:00:23.844: dot1x-ev(Gi1/0/5): Sending event (2) to Auth Mgr for 0000.0000.0000
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Received AUTHC_RESULT from dot1x (handle 0x83000002)
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Authc Result: no-response
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Method dot1x changing state from 'Running' to 'Authc Failed'
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Context changing state from 'Running' to 'Authc Failed'
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Existing AAA ID: 0x00000004
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Received AAA ID 0x00000004 from method
*Mar 1 02:00:23.844: AUTH-EVENT: Enter auth_mgr_idc_modify_keys
*Mar 1 02:00:23.844: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (Unknown MAC) on Interface Gi1/0/5 AuditSessionID 0000000000000002006CD0E0
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Sending AUTHZ_FAIL to dot1x (handle 0x83000002)
*Mar 1 02:00:23.844: dot1x-ev(Gi1/0/5): Received Authz fail for the client 0x4100002D (0000.0000.0000)
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Method dot1x changing state from 'Authc Failed' to 'Failed over'
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Sending DELETE to dot1x (handle 0x83000002)
*Mar 1 02:00:23.844: dot1x-ev(Gi1/0/5): Deleting client 0x4100002D (0000.0000.0000)
*Mar 1 02:00:23.844: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (Unknown MAC) on Interface Gi1/0/5 AuditSessionID 0000000000000002006CD0E0
*Mar 1 02:00:23.844: %AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for client (Unknown MAC) on Interface Gi1/0/5 AuditSessionID 0000000000000002006CD0E0
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) No more runnable methods
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Context changing state from 'Authc Failed' to 'No Methods'
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Building default attribute list for unresponsive client
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Signalling Authc fail for client 0000.0000.0000
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.844: %AUTHMGR-5-FAIL: Authorization failed for client (Unknown MAC) on Interface Gi1/0/5 AuditSessionID 0000000000000002006CD0E0
*Mar 1 02:00:23.844: AUTH-EVENT (Gi1/0/5) Client 0000.0000.0000, Context changing state from 'No Methods' to 'Authz Failed'
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Signalling Authz fail for client 0000.0000.0000
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) dot1x_switch_authz_fail: Called for GigabitEthernet1/0/5 and 0000.0000.0000
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Host access set to ask on unauthorized port since feature
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) host access set to 1 on GigabitEthernet1/0/5
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Setting domain DATA to UNATHED
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Authorized client count: 0
*Mar 1 02:00:23.849: AUTH-SYNC (Gi1/0/5) Syncing update for context (0000.0000.0000)
*Mar 1 02:00:23.849: AUTH-EVENT: Started Auth Manager tick timer
*Mar 1 02:00:23.849: AUTH-EVENT (Gi1/0/5) Started 'restart' timer (60s) for client 0000.0000.0000
*Mar 1 02:00:23.849: dot1x-sm(Gi1/0/5): Posting_AUTHZ_FAIL on Client 0x4100002D
*Mar 1 02:00:23.849: dot1x_auth Gi1/0/5: during state auth_authc_result, got event 22(authzFail)
*Mar 1 02:00:23.849: @@@ dot1x_auth Gi1/0/5: auth_authc_result -> auth_held
*Mar 1 02:00:23.849: dot1x-ev:Delete auth client (0x4100002D) message
*Mar 1 02:00:23.849: dot1x-ev:Auth client ctx destroyed
*Mar 1 02:00:23.849: dot1x-ev:Aborted posting message to authenticator state machine: Invalid clientMultiauthentication Mode
Available in Cisco IOS Release 12.2(33)SXI and later releases, multiauthentication (multiauth) mode allows one 802.1X/MAB client on the voice VLAN and multiple authenticated 802.1X/MAB/webauth clients on the data VLAN. When a hub or access point is connected to an 802.1X port (as shown in Figure 60-5), multiauth mode provides enhanced security over the multiple-hosts mode by requiring authentication of each connected client. For non-802.1X devices, MAB or web-based authentication can be used as the fallback method for individual host authentications, which allows different hosts to be authenticated through different methods on a single port.
Multiauth also supports MDA functionality on the voice VLAN by assigning authenticated devices to either a data or voice VLAN depending on the data that the VSAs received from the authentication server.
Release 12.2(33)SXJ and later releases support the assignment of a RADIUS server-supplied VLAN in multiauth mode, by using the existing commands and when these conditions occur:
•The host is the first host authorized on the port, and the RADIUS server supplies VLAN information.
•Subsequent hosts are authorized with a VLAN that matches the operational VLAN.
•A host is authorized on the port with no VLAN assignment, and subsequent hosts either have no VLAN assignment, or their VLAN information matches the operational VLAN.
•The first host authorized on the port has a group VLAN assignment, and subsequent hosts either have no VLAN assignment, or their group VLAN matches the group VLAN on the port. Subsequent hosts must use the same VLAN from the VLAN group as the first host. If a VLAN list is used, all hosts are subject to the conditions specified in the VLAN list.
•After a VLAN is assigned to a host on the port, subsequent hosts must have matching VLAN information or be denied access to the port.
•The behavior of the critical-auth VLAN is not changed for multiauth mode. When a host tries to authenticate and the server is not reachable, all authorized hosts are reinitialized in the configured VLAN.
NOTE :
•Only one voice VLAN is supported on a multiauth port.
•You cannot configure a guest VLAN or an auth-fail VLAN in multiauth mode.
for more information :
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/dot1x.html -
My operating system windows XP not working with photoshop cloud, why not?
I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
RoyDo you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes -
Rename files or folders in Windows 8 not working
Rename a file or folder on a Windows CE device is not working from Windows 8 when connected through Windows Mobile Device Center.
From Windows 7 it worked just fine!
This has been a problem for a very long time now, and im not alone according to all forums.
But no fix as far as i can find!
Is there anyone that have found a fix on this?http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-8-unable-to-rename-files-on-pocket-pc/abae21b7-7ee1-41c7-853e-1ac7ea5b0413
It seems a issue in window 8.x system. Maybe you can ask for a MS support ticket. -
Itunes 11.1.3 for windows 7 not working
I have the same issue as the one mentioned on this page and have tried the solutions, but they have not worked for me.
http://support.apple.com/kb/TS4123
I've also looked at this long forum discussing the same issue, but it is about an older version of iTunes
https://discussions.apple.com/thread/2770908?start=0&tstart=0
The same message still hangs on my launcher, "Accessing iTunes Store", for an indefinite amount of time and it doesn't change.
I have installed itunes on a separate Windows Vista laptop, and it has the same issue.
The mulititude of proposed solutions in the aforementioned articles have not worked for me. What can I do, and any help is greatly appreciatedCan you check something for me please? I'd like to try doing a "Run as administrator" on your iTunes.
Quit iTunes first.
In Computer, open Local Disk C: or whichever drive you have your program files installed on.
If you have a 32-bit Windows, open the "Program files" folder.
If you have a 64-bit Windows, open the "Program Files (x86)" folder.
Open the "iTunes" folder.
Right-click on the iTunes.exe file and select "run as administrator".
Can you access the Store now?
(Permissions issues can sometimes mimic other problems ... if that's what is going on, the "Run as administrator" thing can sometimes get past the issue.) -
Desktop Bluetooth Windows 7 Not working
I have a BB 9000 that I have been trying to connect with desktop manager 6.0 by Bluetooth in Windows 7. Windows 7 pairs with the 9000 with no issue, but then the DT does not find the device. I have also removed the pairing with win 7 and had DT locate the 9000 on its own, it finds it but when I go to connect it asks me for a pairing code, which I do not have, so I go back to win 7 and pair, as soon as I do that the DT loses the 9000 as a connection option.
I have read many postings about the broadcom driver being a problem, so I installed it and then nothing worked, so I had to do a system restore.
I can not use my usb since it is not working on the device, the only option I have is the bluetooth, can anyone help?Hi heneinf,
Welcome to BlackBerry Support Community Forums.
This blog post should help you pair your BlackBerry with the Desktop Software. http://bit.ly/hW9Tsq
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
HP Help Number for Windows 7 not working
I have a problem with my Windows 7 upgrade. The instructions from HP say that in the US to call 1-888-447-0150. That number answers, there is a beep and the line is cut off.
Why is the number given in the HP instructions not working?Yes, it doesn't work for me either. It connects, then a very short music blip plays and it's then transferred to nowhere and disconnects.
HP has gone to the dogs!
My install of Windows 7 got to the last item on the list, about three quarters of the way through the install (the green bar) and has hung for about 10 hours now without a sign of movement, and HP is nowhere to be found to help. -
Imacs BuggyCrappy: Windows 7 and windows 8 not working
Imac not working as it is supposed to wrt bootcamp windows. Had made rounds to applestore like 10 times and working with online executives. Got to know that fusion drives are not easy to work. Either windows 8 or windows 7 works.
Apple is saying after working with me for more than a month that imca is working as expected. This is so bad from their side. I brought this expensive crappy iMac. Please do not get these products and I';m in no where land.
This device wouldn't let the drvie format it. I'm passed the days that I can return this expensive crappy system. Any suggestions how to get rid of this systems. I've to move away from Apple slowly. Not going to buy single cable from today.Ok. Good to know that there are some people out there on w7/8. Because Engineering or folks at store still do not have any clue and still they say iMac is good. What the heck.
Again transferred to store now these guys just playing with customers. I always make sure to share the feedback with people out there either good or bad. This helps most of us. That the reason why I've put this post so that people be aware what and how things going on.
Maybe you are looking for
-
Unable to find 'weblogic' user in rpd
Hi , I have open the rpd in online mode and trying to set log level for weblogic user. Manage-->Identity-->Select BIRepository. Click on Action tab-->Set online filter. I have entered * button. By default online rpd is going to be closed. Can any one
-
After 8 days of calling Tech Support I'm done with Verizon. Today my speed peaked to 23.3k-The only answer I get from Tech Support is, there seems to be a server end problem. While trying to cancel all my Verizon services, I'm told I will have to
-
I keep being asked for my pop.mail password for my user address. Can you help please.
I keep being asked for my pop.mail password and I do not know what is meant. Can you help. I cannot receive or send messages on thunderbird. You say you have sent a reset message to me but it has not come through. I am searching messages on my ipad.
-
Popular question, size needed to instal windows, on my concerns is.....
I want to install XP Pro on my Mac, for the sole purpose of playing Counter Strike, CS. Source, Half-Life 1 and 2. Is 10GB (the minimum) good enough? I want to use bootcamp, is that recommended, or should I use parallels and/or VMWare? Should I insta
-
My ipone 4 will not charge. I have no power/it will not connect to anything
My iphone is not charging. It wont connect to any source i try. No power