Authorization to run RSRT t code in BW

Hi,
i had installed BW 3.5 newly.i had created username and assigned the role SAP_ALL to it.now i want to give the authorization to run the queries also in BW for that user.is there any method to extend the authorizations for the user?
thanks
Ravi

Hi Ravi,
To execute queries please do as below.
1.Create a role and add the userID (of the owner of the query.)
2.Login to BEX with the userID who created the query.
3.In BEX add the query to the role you just created.
4.now add the userID to the role (in PFCG)which you want to give authorizations to execute query.
5.Maintain authorizations in the role and do a user comparison.
Now the user can execute queries.
Regards,
Bapujee Naidu

Similar Messages

Error while running a sample code

Hello,
I 'm getting the following error while i'm trying to run a
sample code which I have imported into Flex 3.
===================================================================
Severity and Description Path Resource Location Creation Time
Id
unable to open 'C:\Documents and Settings\sn55179\My
Documents\Flex Builder
3\FlexForDummies_Chapter3_Code\libs'FlexForDummies_Chapter3_Code
Unknown 1237909480511 215
===================================================================
Can anyone help me in resolving this issue.
Many thanks in advance.

It's very frustrating that FB stops working when the libs
folder is missing. If you are checking in project files to a source
control app like Perforce, empty folders don't get added, so if you
don't add an initial dummy file, the next time you do a clean sync,
the libs folder may not be there, and even though there is nothing
there, FB complains. :-(

Crystal report run from ASP code significantly slower than when run in CRS

We have CRS XI R2. I developed a report that contains several on-demand sub-reports. The report and sub-reports are very fast when run directly from CRS. However, when I run from ASP (users run a link from the intranet), it takes 4 times longer (1 second on CRS, vs. 5-10 seconds on intranet). The report takes longer, bringing up a sub-report takes longer and paging through sub-reports take longer. What can be done to improve the speed of the report that is using the ASP code? I used a sample program provided at this support site to develop the report and it is pretty basic code. The only time I have a problem is when I have many sub-reports. Since they are on-demand, I do not know why this would matter.

This has been created as an incident with SAP support. Things that you will want to check is making sure that you handle the postback to the code as you do not need to run your entire code on every postback. This will help performance after the original load.
One other thing is to compare performance with the viewer within Infoview that uses the same backend server as your application, ie PSReportFactory uses the page server, so you'll want to test with the DHTML viewer. RAS code (reportclientdocument) uses the Report Application Server so you will want to test with the Advanced DHTML viewer.

What's the authorization to run function CSAP_MAT_BOM_OPEN

let's say, i wrote a report to change the structure of a BOM, using function CSAP_MAT_BOM_OPEN to open the bom, followed by function CSAP_BOM_ITEM_MAINTAIN and CSAP_MAT_BOM_CLOSE to change the bom and close the bom.
well, I could use this report while other could not.
When I used others sap account to run function CSAP_MAT_BOM_OPEN in SE37, I was warned I didn't have the authorization to run this function.
so i want to know the authorization to use this function.
best regards.
Jim

Hi,
The std. authorization objects for BOM will be checked (C_STUE_BER, C_STUE_WRK etc).
Regards,
Vivek

Help needed in running the HTML code

<html>
<head>
<script language="LiveScript">
function WinOpen() {
msg=open("","DisplayWindow","toolbar=no,directories=no,menubar=no");
msg.document.write("<HEAD><TITLE>Yo!</TITLE></HEAD>");
msg.document.write("<CENTER><h1><B>This is really cool!</B></h1></CENTER>");
msg.document.write("<body>Hi</body>");
</script>
</head>
<body>
<form>
<input type="button" name="Button1" value="Push me" onclick="WinOpen()">
</form>
</body>
</html>
whenever i save the abouve code in .htm extension and try to run it, I am able to run it sucessfully.
But whenever I run the below code by saving it as .htm extension then its not running sucessfully:
<html>
<head>
<script language="LiveScript">
function WinOpen() {
msg=open("","DisplayWindow","toolbar=no,directories=no,menubar=no");
msg.document.write("<HEAD><TITLE>Yo!</TITLE></HEAD>");
msg.document.write("<CENTER><h1><B>This is really cool!</B></h1></CENTER>");
msg.document.write("<body><form>
<TABLE cellSpacing=1 cellPadding=1 width="75%" bgColor=silver border=1>
<TR>
<TD><STRONG>Enter Numeric Value *:</STRONG> </TD>
<TD><INPUT name="tbAlphaNumeric" CatsType="NUMERIC" label="Alphanumeric" Mandatory="YES"> </TD>
</TR>
</TABLE>
</form></body>");
</script>
</head>
<body>
<form>
<input type="button" name="Button1" value="Push me" onclick="WinOpen()">
</form>
</body>
</html>
Here I want to display text box in a new fresh field...
Thanks in advance:)

Hi,
The code did work. But I am not sucessfully able to display the values entered in 2nd page in the 3rd page.Please find the code below:
<html>
<head>
<script language="LiveScript">
function WinOpen() {
if (document.form1.cap.value == "")
alert("Enter value in text box");
return;
msg=open("","DisplayWindow","toolbar=no,directories=no,menubar=no, scrollbars=yes");
msg.document.write("<HTML><HEAD><TITLE>Yo!</TITLE></HEAD>");
msg.document.write("<CENTER><h1><B>This is really cool!</B></h1></CENTER>");
msg.document.write('<BODY><form name="form2">');
for(var i =0; i < document.form1.cap.value; i++)
msg.document.write("<INPUT type=text name=tbAlphaNumeric>");
msg.document.write("<br>");
msg.document.write('<input type="button" name="Button2" value="Steal" onClick="javascript:window.opener.WinShow();">');
msg.document.write('</form></BODY></HTML>');
function WinShow() {
msg=open("","DisplayWindow","toolbar=no,directories=no,menubar=no, scrollbars=yes");
msg.document.write("<HTML><HEAD><TITLE>Great!</TITLE></HEAD>");
msg.document.write("<CENTER><h1><B>Display of second page text elements!</B></h1></CENTER>");
msg.document.write('<BODY><form name="form3">');
for(var j =0; j < document.form1.cap.value; j++)
msg.document.write(document.form2.tbAlphaNumeric[j].value);
msg.document.write("<br>");
msg.document.write('</form></BODY></HTML>');
</script>
</head>
<body>
<form name="form1">
<INPUT type= "text" name=cap>
<input type="button" name="Button1" value="Push me" onClick="WinOpen()">
</form>
</body>
</html>

Hello i am having a problem in my 4s that it dosent run any USSD code it goes on calling , can any one help me i am mack from Karachi Pakistan

Hello i am having a problem in my 4s that it dosent run any USSD code it goes on calling , can any one help me i am maqsood from Karachi Pakistan

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

How to run a .bat code?

how to run a .bat code?
I have a code ,batch (.bat) in richtextbox1, and want , to text(code .bat) in richtextbox1 it was launched in the console cmd
without the use of saving a file with this code and run it

In your code, right-click on the word "Desktop". In the context menu, select "go to definition". The object browser opens. You will see other members of the SpecialFolder enum. You can examine these values and read the description below.
One of them is "ProgramFiles". If you pass this value to GetFolderPath, it returns the path of the program files.
Another way: In your code, move the caret to the word "desktop" and press Ctr+J. It will open the same list of enum values. Whenever you select an item in the list, the tooltip should also show a description of the enum value.
Then look at
System.IO.Path.Combine to combine the program files path with the sub folder path. The result will be the full path of the directory. You can call Path.Combine for every path name or file name that you want to add.
Armin

Stream-in images from client to server,without running the transmit code

Hello all,
Im using JMF for my current project.Right now,I am trying to only recieve images from the client without the client transmitting it.That is I dont want the transmit code to run on the client.
I should just be able to stream in the images from client to server, without running the transmit code on client.
Can this be done?
Thanks in advance

suppigs wrote:
Can I know more about this?Sure.
<Side A>
You'd just need to write an application that doesn't have a GUI (so, a console-based application) that listens on some pre-determined port for a message to start broadcasting. Maybe you'd send it the IP/PORT number to start broadcasting on. Once it receives that message, it'd start broadcasting the web cam to the IP/PORT number until it received a message to stop. Once it stops, it'll just go back to waiting for the next "start" signal.
<Side B>
On the other side, you'd write an application that sends the start messages, receives/displays the videos, and then sends the stop signal. This will have a GUI, and be your "control program" so to speak.
Then, once of have both of those programs working...if you're using Linux, you're done. If you're using Windows, you'd need to modify the <Side A> program so that it can run as a Windows service.
There are a lot of ways to do this, you can google it or look at the following link:
[http://twit88.com/blog/2007/09/19/open-source-software-to-start-up-java-as-windows-serviceunix-daemon/]

Reg: While running SGEN transaction code

Dear All,
In my system 4.7 verison is there.When i am running every transaction code i am getting ABAP dump error. So that i am running the transaction code SGEN . Once i run that transaction code i got the process 5 % completed like that. That time i was stopped that process and gone away. While now i want to run that transaction code freshly. I couldnt able to find out the initial screen for the transaction code for SGEN. I am getting final screen of the transaction code.(5% completed screen). What i have to do running the SGEN transaction code freshly.
Thanks,
Sankar M

This is not rigth, if the SGEN is interrupted or canceled the main page won´t appear unless you use back button or cancel the job using SGEN, then a new option will show indicating to generate the remaining objects that were not generated in the last run.
Just use back button and use the new option mentioned.

Authorization objects which contain company code field

Hi,
We are looking for list of Authorization objects which contain company code field for Audit. The listing should have Role, Authorization obj and the <b>company code and values</b>.
Is there any we can query this info.
Thanks,
Sam
Message was edited by: Sam

Hi,
You can use the follwing
in USR12 table
in USOBT table (but you get the details for the Auth Obj in the Tcodes and their field values.
But as far as my knowledge goes you will get all the Auth Obj with Company code field
Caution: If there are some objects in not check or are which are not in any tcodes then they will not be captured.
But they are very less I guess and so i think you can capture most of the Auth Obj I guess
Message was edited by: Manohar Kappala

Problem running an MQ Code

Hello Friends,
While running an MQ code I get the following error :
java.lang.UnsatisfiedLinkError: no mqjbnd05 in java.library.path
Checked with lots of material on net they have asked to set the path of MQ in the enviornment variable, did that too but none helped. Can anybody help on this????

Hello Friends,
I know that I am in the wrong thread, but was unable to find thread for MQ .. So if anybody is familar with the issue or is aware of MQ thread pls let me know ?? Waiting for the any sort of answer ????

Running the same code multiple times with different paramters automatically

Hi guys,
I want to run the same code multiple times with different paramters automatically. Actually, I am doing some sample scans which takes around 2 hours n then I have to be there to change the paramters and run it again. Mostly I do use folowing paramters only
X_Intial, X_Final, X-StepSize
Y_Intial, Y_Final, Y-StepSize
Thanks,
Dushyant

All you have to di is put all of the parameters for each run into a cluster array. Surround your main program with a for loop and wire the cluster array through the for loop. A for loop will autoindex an input array so inside the for loop you just have to unbundle the cluster to get the parameters for each run.
Message Edited by Dennis Knutson on 07-13-2006 07:50 AM
Attachments:
Cluster Array.JPG ‏9 KB

Error when run the compiled code

I have code below,
import java.sql.*;
public class testmysql{
     public static void main(String args[]){
          Connection conn = null;
try{
String userName = "root";
String password = "password";
String url = "jdbc:mysql://localhost:3307/ectol_db";
Class.forName ("com.mysql.jdbc.Driver").newInstance ();
conn = DriverManager.getConnection (url, userName, password);
System.out.println ("Database connection established");
}catch (Exception e) {
          e.printStackTrace();
System.err.println ("Cannot connect to database server");
}finally{
if (conn != null){
try{
conn.close ();
System.out.println ("Database connection terminated");
}catch (Exception e) {
     e.printStackTrace();
     /* ignore close errors */
and i have the mysql-connector-5.0.6.jar
I able to compile code with javac testmysql.java command
However, when i try to run the code with java testmysql command, it prompt me error below
java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at testmysql.main(testmysql.java:11)
Cannot connect to database server
Anyone can help?

ccwoon80 wrote:
Actually, the jar and class file was in the same path...
Thus, what the correct command i need to run the my code?Then your classpath would be .;mysql.jar (or whatever the heck the name of the connector was).
So java -cp .;mysql.jar foo.bar.MyClass

Show-stopping error when I try to load/run the muse code with JQuery version 1.9.1.

Version 1.9.1, and the muse code uses 1.8.3. As you can see HERE,http://jquery.com/download/ version 1.9.0 was a major milestone release for JQuery that eliminated much of the (deprecated) functionality of earlier versions. Unfortunately, the muse html uses some of that deprecated functionality (specifically, the "browser( )" function HERE)http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed. Thus I am getting a show-stopping error when I try to load/run the muse code with version 1.9.1. Other people have had this same problem (see THIS)http://bugs.jquery.com/ticket/13214.
Do you see an update in the near future?

Version 1.9.1, and the muse code uses 1.8.3. As you can see HERE,http://jquery.com/download/ version 1.9.0 was a major milestone release for JQuery that eliminated much of the (deprecated) functionality of earlier versions. Unfortunately, the muse html uses some of that deprecated functionality (specifically, the "browser( )" function HERE)http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed. Thus I am getting a show-stopping error when I try to load/run the muse code with version 1.9.1. Other people have had this same problem (see THIS)http://bugs.jquery.com/ticket/13214.
Do you see an update in the near future?

How to run the sample code using the sdk?

Hi,
I want to run the jsp code from the enterprize sdk available in the sdn community. Can any one tell me how to execute these jsp sample codes and what is the pre-requisite regarding the set up.
I already have the deployment ready.
thanks
AMar

Hi Amar,
To execute samples code, it is same what is required for normal J2EE application.
Make sure add all the jars to your web application.
These jars can be found on your BO server installation if windows.
For BOE XI 3.x
C:\Program Files\Business Objects\common\4.0\java\lib
C:\Program Files\Business Objects\common\4.0\java\lib\external
For BOE XI R2
C:\Program Files\Business Objects\common\3.5\java\lib
C:\Program Files\Business Objects\common\3.5\java\lib\external
Thanks,
Praveen.

Authorization to run RSRT t code in BW

Similar Messages

Maybe you are looking for