Auto create mailbox question

Hi,
Does the "Exchange email address policy" actually create the mailbox, or just the email address?
If not, is there an Exchange policy to actually create a mailbox?
thanks,
dw

If I understand correctly, your second question is about creating automatically mailboxes in Exchange 2013. You have two options:
Create the mailboxes manually (one by one) in the GUI - Exchange Admin Centre
Bulk create the mailboxes with a script in Exchange Management Shell
The following video demonstrates the second approach:

Similar Messages

Store Error: Unable to auto create mailbox

Hello there
I am new here and have a question, I have searched for related topics to this but couldnt find one with any replies so I am hoping there is somebody who can help me here:
I have installed IMS 5.2 with direct LDAP lookup however when I create a user using iDA I am able to login and also can search for the alias and email address but the standard folders: inbox, sent etc do not exist.
I have looked at the config in the iMS console and for the message store it has the primary default set but with no path, when I enter this path save and then restart the servers as instructed, the path is removed again!!
Can anyone shed any light on this as it is driving me nuts, I have not changed any variables since the install and cannot understand why it fails to save the path I specify.
If I look in the logs it states:
Store Error: Unable to auto create mailbox user/blah: Unknow/invalid partition.
Many thanks in advance

Hi there
This has been fixed, the reason was because in message store we had specified the server domain, which for some reason was overwriting the default, so I removed it and left it blank (which means use default), now this is great however has anybody got any ideas as to why the default path always is blank in Messaging Server Console? If I try to add another store it blanks out the path and fails!
A colleague is running the same setup however he is using LDAP 4.7 or so and is having no issues with this.

PO CNV: Auto-Create POs from PUR Reqs generated by OM

Objective: Convert open sales orders and maintain the link to the purchase order for back to back and drop shipment sales orders?
Question: Is it possible to convert the sales orders first. Then run requisition import to create the purchase requisitions in the PO module. After the requisition lines are created, convert the purchase orders through the open interface table or an API by auto-creating the PO from the requisition lines? This would maintain the link between purchasing and order management.
If this is not possible, does anyone have any suggestions? Someone mentioned using BPAs (this assumes I can assign items to specific suppliers).
Any ideas are greatly appreciated.
Thanks

Hi,
After creating a PR, why you want to go thru open interface.
There is a standard functionality : AUTOCREATE, available , which will convert the PR to PO.
On PO Shipment level, you can view the SO number & Line Number also.
Please review the below link.
Oracle Applications - Functional: Business Flow of Drop Ship Order

Auto-create delivery for multiple sales orders

I would like to ask how to create auto-create 'single' delivery
for multiple sales order during release sales order in R11i.
It is found in my example during release sales order, multiple
sales orders fulfill release sales order criteria, a single pick
slip is generated but it is found that each sales order have
individual delivery with it. It will casue multiple pack slips
for a singles pick slip. Is it normal feature for auto-create
delivery, or any setup to solve it?
Thanks in advance.

Am not able to do Single Delivery for Muktiple sales orders
Have you searched the forum for this question as to why you were not able to generate ?? It could be due to multiple reasons. Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
thanks
G. Lakshmipathi

Auto Create service order from incoming email

Hi,
We have a requirement that we want to create service order with a default transaction type automatically from an incoming email. Also we want to route this service order to a specific service group on creation an above.
How can we handle this? I know we can create a rule policy with an action to auto create a service order. My question is how do we set up that this service order is of a particular transaction type and has the default routing to the specific service group..
Thanks
Dan

Hello Dan,
You can specify the transaction type (for ERMS auto-created Service Orders/Tickets) via IMG configuration. In transaction CRMC_ERMS_SM_PROF you select the DEFAULT service manager profile and open the folder "Indirectly Called Services". Then you can specify the transaction type for each of the relevant service IDs: AH_CREATE_SO and AH_CREATE_SR.
Best regards,
John

SPRY IMage SlideShow Basic: Auto create UL LI list

Hope this is of some help to someone.
Recently moved from CS3 to CS5. So new to the whole DW widget thing.
I wanted a basic (no thumbs or titles) slideshow that will auto update when new images are added or removed from an image folder so I don't have to constantly edit the slideshow <UL> list each time I add or remove an image from the image folder/dir
My solution:
I replaced the <UL><LI></LI></UL> code block in my slideshow web page with some php code that will auto create the <UL> list from a folder of images.
I created a folder with only my slideshow images. (.png, .gif and/or .jpg only). I now can add/remove image files from this folder and my slideshow updates automatically.
Seems to work well. My use is for a simple slideshow with no titles or thumbs.
web page code that has replaced the <UL></UL> block of images to display.
add to the top of your slideshow html page (
<?php
require('includes/dir2ul.php'); // path to where you put the dir2ul.php functions file
?>
replace your slideshow webpage SPRY Basic Slideshow <UL> block with the code below with the changes commented with !! Important
<?php
// Fill in the <UL> needed by Spry basic slideshow widget with a php dump of all files in a directory ending with .PNG/.GIF/.JPG to a <LI> element list
$my_dir = './my_slideshow-1/'; //!!!! IMPORTANT: change to your slideshow image directory path as shown (yes, ends with a slash)
$spry_slideshow_id= 'SPRY_ImageSlideShow_3'; //!!!! IMPORTANT: change to your SPRY slideshow ID
dir2ul($my_dir, $spry_slideshow_id);
?>
The php function dir2ul.php (and support functions) code you need to require at the to of the slideshow page.
Put this code in a file named dir2ul.php (as used in this example) and save it somewhere that you include (require) in your slideshow web page.
<?php
function dir2ul($my_dir, $spry_slideshow_id) {
// Fill in the <UL> needed by Spry basic slideshow widget with a php dump of all files in a directory ending with .PNG/.GIF/.JPG to a <LI> element list
// $my_dir : image directory
$dir_handle= opendir($my_dir);
if (!$dir_handle) {
print 'ERROR opening directory specified: ' . $my_dir . '';
else {
//success opening directory
/* loop thru the directory. */
print '<UL id=' . $spry_slideshow_id . '>';
while (false !== ($file = readdir($dir_handle))) {
 // !!works best/faster if you keep your image directory all files. is_dir not a perfect check!!
 if(!is_dir($file) && ($file != ".") && ($file != "..")) {
 // !!!!IMPORTANT: change if needed. Only select files ending with .JPG, .JPG, or .PNG (case insensitive!)
 if(EndsWith($file, '.JPG') || EndsWith($file, '.GIF') || EndsWith($file, '.PNG') ){
 print '<li><img src="' . $my_dir . $file . '"/></li>';
 else {
 // directory: ignore (not recursive)
 //print ' >> Directory: ' . $file . '\n';
 } // while
 echo '</UL>';
} //else
function EndsWith($FullStr, $EndStr) {
 // Get the length of the end string
 $StrLen = strlen($EndStr);
 $FullStrEnd = substr_compare($FullStr, $EndStr, -$StrLen, $StrLen, true); // case insensitive
 //$FullStrEnd = substr($FullStr, strlen($FullStr) - $StrLen); // case sensitive
 //print ' >>FullStr=' . $Full_Str . ' >>EndStr=' . $EndStr . ' >>-StartPos=' . -$StrLen . ' >>length_to_compare=' . $StrLen . ' >>return=' . $FullStrEnd;
 return $FullStrEnd == $EndStr;
function is_dir_LFS($path){
return (('d'==substr(exec("ls -dl '$path'"),0,1))?(true):(false));
?>

I don't know what to say....I tried all night it didn't work. As soon as I posted my question on the forum the slideshow starts running....wow....I'm speechless. Thanks all who's looked at my post.
Loci

Using DAG name as msExchServerName when creating mailboxes

We have 3 different exchange servers behind DAG. mailboxes are mounted into only 2 among 3 of the exchange servers.
Mb1 - server1, 2
Mb2 - server 2,3
We are using microsoft's forefront identity manager for exchange provisioning and msexchServerName is one of the mandatory attributes to create mailboxes through it - because it runs update-recipient. I am wondering if I can use DAG server name in place
of msExchServername in creating mailboxes? Would it cause any problem is DAG name is used instead of actual server name

Hi,
Based on my knowledge, MsExchServerName is an attribute of FIM. Actually, we have a dedicated support team regarding the FIM. I recommend you ask your question on our Microsoft Forefront Identity Manager forum which is staffed by more experts specializing
in this kind of problems. Thanks for your understanding.
For your convenience:
http://social.technet.microsoft.com/Forums/en-US/home?forum=ilm2
Hope it helps.
If you have any problem with Exchange server, welcome to our Exchange Forum.
Best regards,
Amy Wang
TechNet Community Support

Auto-creating tables with CMP Explicit Mapping

Hello.
I am trying to migrate a working CMP EJB Jar from Weblogic to OC4J, using the admin.jar deploy utility. I believe my orion-ejb-jar.xml deployment descriptor (shown at the bottom) is set up properly, but OC4J attempts to auto-create tables for my entity beans anyway. (see messages that follow).
Can anybody tell me why it tries to create these tables? Is something missing from my deployment descriptor?
Thanks,
David
Auto-creating table: create table User_passwords_Passwor__fqeml6 (User_SEC_USER.
SEC_USER_ID NUMBER not null, Password_SEC_USER_PASSWORD_ID NUMBER null)
Error creating table: ORA-01748: only simple column names allowed here
Auto-creating table: create table User_userRoles_UserRol__guatbv (User_SEC_USER.
SEC_USER_ID NUMBER not null, UserRole_SEC_USER_ROLE_ID NUMBER null)
Error creating table: ORA-01748: only simple column names allowed here
Auto-creating table: create table Permission_RolePermiss__768cc0 (Permission_SEC
FUNCTIONID NUMBER not null, RolePermission_SEC_ROLE_FUNCTION_ID NUMBER null)
Error creating table: ORA-00972: identifier is too long
Auto-creating table: create table Role_UserRole_role_User_39lzhp (Role_SEC_ROLE.
SEC_ROLE_ID NUMBER not null, UserRole_SEC_USER_ROLE_ID NUMBER null)
Error creating table: ORA-01748: only simple column names allowed here
Auto-creating table: create table Role_rolePermissions_Ro_4ocmz1 (Role_SEC_ROLE.
SEC_ROLE_ID NUMBER not null, RolePermission_SEC_ROLE_FUNCTION_ID NUMBER null)
Error creating table: ORA-01748: only simple column names allowed here
orion-ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE orion-ejb-jar PUBLIC "-//Evermind//DTD Enterprise JavaBeans 1.1 runtime//EN" "http://xmlns.oracle.com/ias/dtds/orion-ejb-jar.dtd">
<orion-ejb-jar deployment-version="9.0.3.0.0" deployment-time="e6e55808e4">
<enterprise-beans>
<session-deployment name="SecurityComponent" >
</session-deployment>
<session-deployment name="ServerSecurityContext" >
</session-deployment>
<session-deployment name="SecurityComponentSecurityFilter" >
</session-deployment>
<entity-deployment name="User" table="SEC_USER" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="userId" persistence-name="SEC_USER.SEC_USER_ID" />
</primkey-mapping>
<cmp-field-mapping name="partyId" persistence-name="PARTY_ID" />
<cmp-field-mapping name="officeLocation" persistence-name="OFFICE_LOCATION" />
<cmp-field-mapping name="defaultLocation" persistence-name="DEFAULT_LOCATION" />
<cmp-field-mapping name="districtVvid" persistence-name="DISTRICT_VVID" />
<cmp-field-mapping name="userName" persistence-name="SEC_USER.USER_NAME" />
<cmp-field-mapping name="accountActivationDate" persistence-name="SEC_USER.ACCOUNT_ACTIVATION_DATE" />
<cmp-field-mapping name="defaultBranchVvid" persistence-name="SEC_USER.DEFAULT_BRANCH_VVID" />
<cmp-field-mapping name="unitVvid" persistence-name="UNIT_VVID" />
<cmp-field-mapping name="sectionVvid" persistence-name="SEC_USER.SECTION_VVID" />
<cmp-field-mapping name="lastUpdateTimestamp" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_DT" />
<cmp-field-mapping name="lastUpdateSystemUserId" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_SEC_USER_ID" />
<cmp-field-mapping name="failedLoginAttempts" persistence-name="SEC_USER.LOGIN_ATTEMPTS_CNT" />
</entity-deployment>
<entity-deployment name="Permission" table="SEC_FUNCTION" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="permisssionId" persistence-name="SEC_FUNCTION_ID" />
</primkey-mapping>
<cmp-field-mapping name="permission" persistence-name="FUNCTION_NAME" />
</entity-deployment>
<entity-deployment name="Role" table="SEC_ROLE" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="roleId" persistence-name="SEC_ROLE.SEC_ROLE_ID" />
</primkey-mapping>
<cmp-field-mapping name="lastUpdateTimestamp" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_DT" />
<cmp-field-mapping name="lastUpdateSystemUserId" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_SEC_USER_ID" />
<cmp-field-mapping name="roleDescription" persistence-name="SEC_ROLE.ROLE_DESC" />
<cmp-field-mapping name="roleName" persistence-name="SEC_ROLE.ROLE_NAME" />
</entity-deployment>
<entity-deployment name="Password" table="SEC_USER_PASSWORD" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="passwordId" persistence-name="SEC_USER_PASSWORD_ID" />
</primkey-mapping>
<cmp-field-mapping name="password" persistence-name="PASSWORD" />
<cmp-field-mapping name="activeInd" persistence-name="ACTIVE_IND" />
<cmp-field-mapping name="expirationDate" persistence-name="EXPIRATION_DATE" />
<cmp-field-mapping name="userId" persistence-name="SEC_USER_ID" />
<cmp-field-mapping name="lastUpdateTimestamp" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_DT" />
<cmp-field-mapping name="lastUpdateSystemUserId" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_SEC_USER_ID" />
</entity-deployment>
<entity-deployment name="UserRole" table="SEC_USER_ROLE" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="userRoleId" persistence-name="SEC_USER_ROLE_ID" />
</primkey-mapping>
<cmp-field-mapping name="sequenceNum" persistence-name="SEQUENCE_NUM" />
<cmp-field-mapping name="userId" persistence-name="SEC_USER_ID" />
<cmp-field-mapping name="roleId" persistence-name="SEC_ROLE_ID" />
</entity-deployment>
<entity-deployment name="RolePermission" table="SEC_ROLE_FUNCTION" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="roleFunctionId" persistence-name="SEC_ROLE_FUNCTION_ID" />
</primkey-mapping>
<cmp-field-mapping name="functionId" persistence-name="SEC_FUNCTION_ID" />
<cmp-field-mapping name="roleId" persistence-name="SEC_ROLE_ID" />
<cmp-field-mapping name="sequenceNum" persistence-name="SEQUENCE_NUM" />
</entity-deployment>
</enterprise-beans>
<assembly-descriptor>
</assembly-descriptor>
</orion-ejb-jar>

Hi David,
The "autocreate-tables" attribute is defined in the DTD for the "orion-application.xml" file. This file is usually generated automatically by OC4J, from your application's "application.xml" file when you deploy your application. (Note that subsequent [re-]deployments of your application will not change the "orion-application.xml" file.)
The default value for this attribute is 'true', and the default is defined in the "application.xml" file that is located in the "j2ee/home/config" subdirectory of the OC4J installation.
Hope this answers your question.
Good Luck,
Avi.

Windows Firewall and unwanted rules being auto created

When i activated the Windows Firewall after switching from Third party software i encountered something weird. The firewall created several New rules that blocked certain traffic.
Is their any circumstances where the Windows firewall will Auto create rules that Block traffic?
Is there any way to prevent this from happeneing? I want to know what happens in my firewall :)
I have disabled the prompt that asks the user to allow traffic, but still i dont feel that i have full Control of the firewalls behaviour. Could disabling this feature being the cause of Things being auto blocked?

You can try looking in Event Log: Applications and Services -> Microsoft-> Windows -> Windows Firewall -> Firewall
For list of event id's you can try looking at
https://technet.microsoft.com/en-us/library/dd364427(v=ws.10).aspx
You can use Event Viewer to create a filter for event id 2004 (A rule has been added to the Windows Firewall exception list.) or you could modify the powershell script you can find here
http://superuser.com/questions/747184/is-there-anyway-to-see-when-a-windows-firewall-rule-was-created-enabled-using-po
to also include the ModifyingApplication (or any of the values) eg
$Events = Get-WinEvent -ErrorAction SilentlyContinue -FilterHashtable @{logname="Microsoft-Windows-Windows Firewall With Advanced Security/Firewall"; id=2004}
ForEach ($Event in $Events) {
$eventXML = [xml]$Event.ToXml()
For ($i=0; $i -lt $eventXML.Event.EventData.Data.Count; $i++) {
Add-Member -InputObject $Event -MemberType NoteProperty -Force `
-Name $eventXML.Event.EventData.Data[$i].name `
-Value $eventXML.Event.EventData.Data[$i].'#text'
$Events | Format-Table -Property TimeCreated,RuleName,ModifyingApplication -AutoSize
(You may need to adjust powershell screen buffer width first)

How to create mailboxes under mac os x 10.6.4 either using ldapv3 or windows active directory?

hi,
i'm working on the mail server of our company. the plan is to implement the built in mail server feature of mac mini OS X 10.6.4 using either ldapv3 or preferably our existing window active directory users.
i was able to set the open directory and can view the user accounts from AD. my problem is i do not have any clear documentation or manual on how to create mailboxes using either AD accounts or MAC LDAPv3. i already checked the manual of mac os x mail service administration and have found none pertaining to this case.
i would really appreciate if someone can give me reference on how to do this. as of now im quite desperate because i have a deadline for this project.
thank you in advance for your help.

You said, "A 2014 iMac can't run either Snow Leopard or Lion." I know that. What I want to know is how I can install Lion or Snow Leopard on a peripheral hard drive, NOT on my iMac.
– Larry

Sound Icon Greyed Out - Midi AutoAggDevice auto-created

Whenever I restart my computer or log out/back in, the sound icon in the menu bar is greyed out. When I check the sound preferences in system preferences, it says that the output is: "AutoAggDevice". I gain back control after selecting "Internal Speakers". I have tried setting them as my default, but it always defaults to "AutoAggDevice".
I have gone into the MIDI preferences (Audio Midi Setup) and there are many extra devices, but when I try and remove them, they come right back after a restart. I wouldn't mind if it wasn't affecting my default output, but it is getting really frustrating.
I have also run a repair disk permissions to no avail.
Does anyone know how to permanently delete these auto-created midi devices or at least get the default audio setting to stay as internal speakers?
Thanks.
MBP, 13 inch Retina, Late 2013 model
OS X 10.10.2
2.4 GHz Intel Core i5
8 GB 1600 MHz DDR3

Resetting PRAM may help.
Reset PRAM. http://support.apple.com/kb/PH14222

How to clear interco vendor/customer which auto created during interco pstg

Hi all,
During intercompany posting, system auto created vendor/customer line items.
When and how these created items to be clear out?
TQ

Hi,
Please go through below thread:-
[Inter company AR/AP open item clearing - Urgent;
Regards,
Gaurav

Auto created line item in J1inchln

Sap Gurus
while doing J1INCHLN extra line is creating for WCT liability account.
FS10n WCT liability account is showing credit balance of Rs 125000
while updating challan one extra line item in credit side is generating by system automatically for Rs 3150 and debit the Liability account, by crediting the Govt. as vendor account by 128150.
WCT liability A/C        Dr       128150
Govt. Vendor A/C      Cr       125000
WCT liability A/C       Cr         3150.Auto Created
Why this entry is generating Please suggest.
Pavan

Hi Pavan,
Check the Govt. Vendor master - withholding tax tab, whether any TDS payment related tax codes are assigned. If so remove them and run the transactions again.
Hope it helps

Porject code from requisition not going to PO from auto create

Hi
We are adding a project code to the requisition.
and after all approvals for the requisition
we want the project code which is a 4 digit number to populate the dff on the PO form when we use auto create function.
please let me know how can we go about this.
thanks

suspecting a known issue:
Refer MOS NOTE:
Requisition Distribution DFF Values Not Copied To Purchade Order Distribution DFF During Autocreate (Doc ID 976943.1)
The file versions which contain the updated trigger definition are:
Rel 11i : popch80.sql v. 115.4.11510.5 or later
Please check for relevance

IPad Air - photo auto created in gallery issue

Hi everyone!
Not sure if anyone found this issue before, the identical photo has been auto created in gallery (iPad Air 7.1.1) many times. I never took the photo myself. it just looks like it came from the internet but I never saved. I wonder if this is a bug and how should i do to solve the issue. Many thanks in advance !!

It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106

Auto create mailbox question

Similar Messages

Maybe you are looking for