Auto export ODI objects

Hi Guru,
can we export ODI Objects Automatically , let's say i create a package and when i will run that package
it should export all objects on a marker group basis.
like i want all objects not just Scenario
Model, Folder, Interface,Package, Scenario, Variables

Go for ODi SDK. That can help you to achieve the requirement. For the starting point refer below link
http://odiexperts.com/export-and-importing-scenarios-based-on-project-orfolder/
This is also discussed in below thread
Re: ODI IMPORT AUTOMATION?
Bhabani
http://dwteam.in

Similar Messages

  • Steps to export various objects created in v10.1.3.5.6 ODI + steps to import back in v11.1.1.7 ODI

    All,
    As we all do these days and for reasons mostly associated with budget constraints, I have been asked to wear a brand new hat - the "ODI Guru Hat" - at my client's site to facilitate the migration of their v11.1.1.x Hyperion EPM implementation to a v11.1.2.3.5xx Hyperion EPM implementation.
    The v10.1.3.5.6 ODI objects\processes are currently set up to refresh a v11.1.1.3.x Planning application currently fall into 2 categories:
    1. metadata management (ie, updating the Planning application with the latest Account and Entity dimension changes from the SAP ERP); and,
    2. data management (ie, updating the Planning application with the latest data file from the SAP ERP).
    The requirement at hand involves replicating everything currently set up to operate under the v10.1.3.5.6 ODI into a v11.1.1.7.x ODI instance. The v11.1.1.7.x ODI instance has been installed on a different server to the one on which v10.1.3.5.6 ODI instance is installed. Brand new master and work RDBMS repositories have also been created to host the v11.1.1.7 ODI
    So far and not knowing much about ODI, I have exported as many objects as I could locate under the Designer\Operator\Security\Topology components of the v10.1.3.5.6 ODI instance before importing them back (using the Duplication method) into the v11.1.1.7.x ODI instance. Once imported, I have re-pointed the paths to different directories on the new servers.
    I would like to know if there are any other steps I should be aware of and\or look into. Better still, I would appreciate it enormously if someone could point me into the right direction as to any documented best practice steps to follow to perform migrations from one ODI version to another, when both ODI instances have been installed on different servers.
    Thanks in advance,
    Cheers,
    JBM

    Hey,
    Just export and import won't work with different versions. Using Upgrade utility(ua.bat), we need to upgrade to current version.
    We should upgrade the ODI from 10g to 11g, then we can export objects from one environment to another.
    Check the below link to upgrade ODI::
    11g Oracle Data Integrator - Upgrading from 10g - Part 4/11g - ODIExperts.com
    Thanks,
    Mady

  • Picture quality decrease if auto export to PDF

    Hi,
    I am using crystal report 8.5 developer version and MS Access (2003).  I have created a report with a JPG company logo inserted.  If I manually export the report to PDF. No problem and the picture looks good.  However when I run VB code from Access 2003 to auto export to PDF, the picture quality for the logo decrease badly.  Is there anyone who could give me some advice?
    Thanks in advance.  I here also attached part of the VB code below for your easy reference
        ReportName = Source
        'Using the .OpenReport method from the Application object to set your Report object to a RPT file
        Set crxReport = crxApplication.OpenReport(ReportName)
        crxReport.ParameterFields.Item(1).AddCurrentValue (CustDB!CustNum)
        OutName = Destination + CStr(CustDB!CustNum) + ".pdf"
        crxReport.ReadRecords
        'Defines report's format type
        crxReport.ExportOptions.FormatType = crEFTPortableDocFormat
        'Defines report's destination type
        crxReport.ExportOptions.DestinationType = crEDTDiskFile
        'Defines report's file name
        crxReport.ExportOptions.DiskFileName = OutName
        'exports without calling the exporting dialog window
        crxReport.Export False

    Thank you for your suggestion.  I immediately check for the 'retain color depth option' under 'report options' but unable to find any (I am using CR 8.5).  The options that are available under report options are as shown below.  May be it is somewhere else?
    Convert Date-Time Field
    Preview Pages Start With
    Convert NULL Field to Default
    Translate DOS Strings
    Translate DOS Memos
    Save Data with Report
    Save Summaries with Report
    Cartesian Product
    Suppress Printing If No Records
    Show All Headers on Drill Down
    Always Sort Locally
    Use Indexes Or Server for Speed
    Perform Grouping On Server
    More Report Engine Error Messages
    Case Insensitive SQL Data
    Select Distinct Records
    Select Distinct Data for Browsing
    Perform Query Asynchronously
    Create Group Tree
    Display Alerts on Refresh

  • Migrating ODI objects from one environment to another

    Hi,
    This is for the first time that i am trying to migrate odi objects from one environment to another. I am facing issue and requesting help.
    The odi installation is the part of ASCP module of JDEdwards where some standard objects (interfaces/packages) are already created. I have developed some custom interfaces and want to migrate the same to QA environment.
    I exported the specific folder (including children) to an xml file and then trying to import the same in the QA environment.
    When i choose "Synonym Insert_Update" option to import is prompts error :
    You are importing an object from another repository with same identifier. This is forbidden
    This is completely new folder which do not exist on target. If I import using Duplication option, it successfully import and assigns new internal ID to object (which is as expected). But how will I update the newly created object in future ?
    What should be followed to migrate objects ?

    user8628169 wrote:
    Hi,
    This is for the first time that i am trying to migrate odi objects from one environment to another. I am facing issue and requesting help.
    The odi installation is the part of ASCP module of JDEdwards where some standard objects (interfaces/packages) are already created. I have developed some custom interfaces and want to migrate the same to QA environment.
    I exported the specific folder (including children) to an xml file and then trying to import the same in the QA environment.
    When i choose "Synonym Insert_Update" option to import is prompts error :
    You are importing an object from another repository with same identifier. This is forbidden
    recreate your OA repository with repository id different from your DEV repository.
    Then you should not get this problem.
    This is completely new folder which do not exist on target. If I import using Duplication option, it successfully import and assigns new internal ID to object (which is as expected). But how will I update the newly created object in future ?
    What should be followed to migrate objects ?

  • Multiple Failures with Auto Export Private Preview for one DB

    My Customer has received 7 failures so far this month for their daily exports for a specific Database.  While they understand this service is in private preview,
    this failure rate is abnormally high from their experience with this service and the Customer is asking for Microsoft to investigate.  They are not experiencing this same failure rate on any of their other production DB exports.  The
    error logs show the following:
    Start Time: Saturday, July 05, 2014 2:08:01 AM
    End Time: Saturday, July 05, 2014 2:29:50 AM
    Subscription ID: <SUB ID>
    Server Name: <SERVER NAME>
    Database Name: <DATABASE NAME>
    Operation Name: Export
    Operation ID: e8f916a6-838d-457c-be3c-83257b7c039b
    Status: Failed
    Details: Error encountered during the service operation.
     Could not connect to database server.
      Cannot open database "<DATABASE NAME>" requested by the login. The login failed.
    Login failed for user '<DB ADMIN USER>'.
    This session has been assigned a tracing ID of 'ebc9b95b-e777-49b1-82d8-064549c6fe95'.  Provide this tracing ID to customer support when you need assistance.
    Can we please have an Engineer supporting the Auto Export Private Preview review this matter and the error logs further to help us understand if the multiple failures are considered
    normal or high?
    Thank you,
    Frank Ellero
    Frank Ellero - Microsoft Corporation

    Hi,
    The error you have mentioned points to the connectivity issues to the database.Please have a check on the below link for more information:
    http://social.technet.microsoft.com/wiki/contents/articles/1719.windows-azure-sql-database-connectivity-troubleshooting-guide.aspx
    http://support.microsoft.com/kb/2980233/en-us
    If the issue persists, I would recommend that you have a
    Technical Support Ticket opened as it would require dedicated troubleshooting.
    Regards,
    Mekh. 

  • Can I export solid objects into Illustrator / InDesign CS2 and maintain vector format

    Can Adobe 3D export solid objects in vector format into Illustrator or InDesign CS2 suite?
    I'm interested in taking solid 3D objects developed in Pro/E 2.0 and import from Adobe 3D into Adobe Illustrator & InDesign in vector format for page layout. I want to import solid objects in vector format and maintain color scheme and surface textures.
    I'm running 3D trial version and can successfully import 3D objects (asm & prt files) solid views from Pro/E but can only export wireframe views from Adobe 3D Toolkit into Illustrator or InDesign (CS2). Solid objects first have to get rendered in a raster format before importing into Illustrator.
    If this function is not supported does anyone have experience doing this using Quadraspace or Right Hemisphere 3D software?

    Any help???? After 2 weeks I still can't learn from Adobe or Right Hemisphere people how to import solid objects in vector format into Illustrator with color and surface textures in place. All imported objects in vector format are converted to a wireframe or line format unless they are first rasterized.

  • How to export each object as a separate image?

    I do not have a wealth of experience with Illustrator, and was given a website design to translate into html/css content. I'd really like for someone to tell me that there's a nice, simple way to export each OBJECT as its own FILE (png, bmp, jpg, realistically anything will work for these buttons). Is there a plugin or built-in feature that will accurately do this?
    I noticed that it can be SLICED by GUIDES, but that seems counter-intuitive. Why not just use the standard size of each object to crop than by creating a huge grid of guides?
    Any help or suggestions would be greatly appreciated; I'm not having the greatest first experience with Illustrator thus far.

    I do this by hiding all the objects except for the one that I want to export. The way I set up my layers when creating a file makes it easy for me to do this; several clicks at the most. However, I can easily imagine scenarios where this method would be a real pain.
    Here is how I think it should work: it should export whichever object is selected. If you want to export the whole thing, then either select the whole thing or select nothing.

  • Import/Export Single Object

    Hi Folks,
    i tested imort/export for SWCV it is working fine...but when i m trying it for single object like namespace etc...
    I face the problem while exporting/importing a namespace in IR.
    1) I exported a namespace using menu Tools->Export design Objects
    2) Selected the software Component and Mode as using file system in the wizard
    3) Selected my namespace which i want to export
    got the message exported successfully.
    Export Path: D:\usr\sap\PL2\SYS\global\xi\repository_server\export
    File: XI3_0_TEST_2.0_of_xxx.com-nsps.tpz
    <b>I tried to import the same namespcae back into same IR.</b>
    and followed these step.
    1) Copied the .tpz file into import folder.
    2) then using the menu tool->import design Objects i selected my .tpz file
    3) Got the following msg.
    Import source XI3_0_TEST_2.0_of_xxx.com-nsps.tpz imported successfully. All imported design objects integrated successfully 3 import object(s) imported successfully 
    Import file moved to importedFiles\XI3_0_TEST_2.0_of_xxx.com-nsps_2007-02-13_02-41.tpz
    <b>But i was not able to see the imported namespace.</b>
    Also followed this document
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/content.htm
    Can u guide me plz.
    Sachin

    <b>Sreeram</b>
    I m not trying to move it form DEV to QA.
    I m exporting the namespace from DEV. say http://abc.com/xi/test of SWCV  Test of abc.com.
    and then i m trying to import it back to Same DEV box.
    I m getting the sucessfully imported message but not able to see the namespace.
    I tried deleting the namespace after exporting and then importing.
    But still i can't see it.
    However in cache notification and Tools->Find Transfer it is showing that it is sucessfully imported.
    I think it might be the issue with active version... can u help me out.
    <b>Chandra</b>
    i m not changing the name of anything. i got the above message as well, but not able to see the imported object.
    Sachin
    Message was edited by:
            Sachin Dhingra

  • How to export single object of LSMW to already existing project

    I want to export one object of LSMW project to another project which is already exists and conatins some subprojects and objects. Menas I want to export one object to already exsiting project. How can I do this?

    hi,
    you may copy objects between projects....
    see: lsmw-all project objects,,and here fucntion "copy entry"
    regards,darek

  • Captivate will not auto export audio to  Audition

    I can not get CS7 to auto export audio Audition for editing. Audition will open but audio will not show up.

    gosid100 wrote:
    Is it possable this is only in the 64 bit download?
    The current version of Audition is CC, and it's 64-bit only. The CS6 version is 32-bit only. Neither version has the other option.

  • Locking secondary display for slideshow.  Auto Export after tethered shooting?

    I use LR 3.5 when I shoot tethered.  It seems the upgrade to 3.5 helped with the inconsistent connection problem on my D3. I still get dropped but not as often.
    Thanks for working on that.
    I've been using LR for a photo booth arrangement.  I add logos using watermarks. As I shoot;  the images display on my projector.
    I am trying out the secondary display feature using my TV.  Seems to be working but I want to lock the secondary screen onto Lightroom.
    When I go to another application the secondary screen goes away and I get a standard apple screen shot.  Is there a way to lock it so I can use another application on my Macbook Pro?
    I need to use a Polaroid GL10 printer for an event and have to use Polaroid's software.  There is no print driver yet for this.
    So I have to export images from LR3. Then import and print using Polaroid's software
    I would love to see LR have an auto export function.  So I can capture tethered, process images, and export images into a folder while I'm shooting.
    I don't think this exists?  Are there any plugins that you can recommend for this.
    Thank you.
    Macbook Pro 10.6.8
    Nikon D3
    LR 3.5

    I changed it back to the url now you should see the error now.
    http://dkphotos.net/Portfolio/Studio%20Photography/Outdoor/Outdoor%20Studio%20Photography. html
    and that link once u open it changes to this: https://doc-0s-7g-docs.googleusercontent.com/docs/securesc/ug2dl6ngof2hegen9nqlvc6a6de2d91 a/ma2qhmo857gb9saqje9fllntlrdl6jkg/1376942400000/10099564583573154067/10099564583573154067 /0B8UhkqE2KgybcnNIXzVSM2MxVHc?e=view&h=16653014193614665626&nonce=6p4h7ef1u0o2a&user=10099 564583573154067&hash=t49tp4bkne0vevvips3l5f7flvp8bkvv
    but i still keep on getting the same error when i try oppening the first image

  • Export list object to XXL

    All,
    I have a user that we gave a new laptop to and the spreadsheet button in t-code KSB1 will no longer let him export list object to XXL.  He is on GUI 7.10 and Office 2003.  I have checked the settings for Marcos in Excel and set them to allow all macros along with Visual Basic.  What setting am I missing?
    Thanks,
    Sean

    Hi Sean,
    You could also try the following:
    1. run TCode SA38
    2. run ABAP-Programm SALV_BS_ADMIN_MAINTAIN
    3. mark Detail-Selektion
    4. put a client and user
    5. run
    6. mark a row for the user
    7. delete with F7-key (or button)
    Then again the choice would have to appear for the XXL Format when exporting to Excel.
    Regards,
    ScriptMan

  • Export list object to xxl in sap

    Dear Team
    when downloading to spread sheet , i unknowingly pressed the "Always use selected format". Now i am getting the pop up for export list object to xxl. i want it to deactivated and and want the "option of select format"
    please help me.
    Regards
    Hamsa Jananee

    Hi Hamsa Jananee
    You do following:
    Re: "Always Use Selected Format" check box in line items report
    and
    Re: Export to excel popup after SP upgrade
    Hope it helps.
    Thanks and Regards,

  • JCOM manpulation error:  weblogic Error BEA-210000  Export of object barred

    Hi everyone,
    I'm trying to access a COM (MSWORD.OLB ) object from weblogic .
    I've writing a sample Java proggram to access some methods of my COM Object.
    But during the runtime, i got the following BEA weblogic error :
    *<Error> <COM> <BEA-210000> <Export of object: com.linar.jintegra.Variant@b96c73 barred>*
    com.linar.jintegra.a
         at com.linar.jintegra.ba.c(Unknown Source)
         at com.linar.jintegra.ba.a(Unknown Source)
         at com.linar.jintegra.Variant.<init>(Unknown Source)
         at com.linar.jintegra.Marshaller.a(Unknown Source)
         at com.linar.jintegra.Marshaller.a(Unknown Source)
         at com.linar.jintegra.Marshaller.b(Unknown Source)
         at com.linar.jintegra.Dispatch.vtblInvoke(Unknown Source)
         at word.DocumentsProxy.open(Unknown Source)
    Any ideas to solve this problem ?
    Thanks
    Sergio
    Edited by: user11108138 on 10 févr. 2012 02:24

    Sorry for delay!!
    I tried W2KSP1, W2KSP2 and XPpro on several P3 / P4 with 256 / 521 RAM.
    Uli
    "dan seeman" <[email protected]> schrieb im Newsbeitrag
    news:[email protected]..
    Hi,
    One last question. Can you tell me more about what OS you have theWLServer
    installed on (machine type, OS and version)?
    Thanks in advance.
    dan
    Uli Schulze-Eyssing wrote:
    Hi Dan,
    wl70 release
    Uli
    "dan seeman" <[email protected]> schrieb im Newsbeitrag
    news:[email protected]..
    What version of WLS you are using?
    dan
    Uli Schulze-Eyssing wrote:
    We are trying to use jCOM to connect to our WL-App. (We had been
    using
    JIntegra before)
    I made a simple JCom-Helper identical to the one, delivered in the
    earlybound-sample.
    Trying to create an object in VB couses the server to say:
    <03.05.2002 15:11:58 CEST> <Error> <COM> <210000> <IOXIDResolveropNum 5
    invoked. This method is not implemented.>
    <03.05.2002 15:11:58 CEST> <Error> <socket> <000413> <Failure in
    processSockets() - GetData: weblogic.socket.NTSocketMuxer$GetData -fd:
    '2324', numBytes: '654'
    java.lang.NullPointerException
    java.lang.NullPointerException
    atweblogic.com.MuxableSocketDCOM.isMessageComplete(MuxableSocketDCOM.ja
    >>>>
    va:182)
    atweblogic.com.MuxableSocketDCOM.dispatch(MuxableSocketDCOM.java:203)
    >>>>
    atweblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:667)
    >>>>
    atweblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:
    >>>>
    23)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
    >
    and no object is created (VB hangs in waiting for the object)
    In the FAQ I can read:
    065070
    There is a known issue with the logging of WebLogic Server jCOMerror
    messages. COM warnings are incorrectly logged as errors, as in thisexample:
    <Error> <COM> <210000> <IOXIDResolveropNum 5 invoked. This method is
    not
    implemented.>
    So: I know, this is only a warning, but where is my object? ;-)
    Can s/o tell me?
    Many thanks,
    Uli

  • Auto export ARD Report

    Hi all,
    I'm seeking to auto export an ARD Report, but i don't find how.
    I've look on Automator, but ARD actions doesn't seems to do that…
    Is somebody know how do that ? It will help me

    Hi,
    Method 1: use Event pooling table (in RPD physical layer)
    Method 2: enable : By Pass presentation server cache
    Ref:
    http://obieeelegant.blogspot.com/2011/06/by-pass-server-cache-in-obiee-answres.html
    http://gerardnico.com/wiki/dat/obiee/event_table
    Thanks
    DEva

Maybe you are looking for