Auto restart failed fpr oracle VM guest
Hello,
I have created a guest using below command and was able to get xm list:
# xm create testrac1.cfg
# xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 543 8 r----- 7226.7
testrac1 1 8192 4 -b---- 11.9
I have used below cfg file to create testrac1 guest
# cat testrac1.cfg
bootloader = '/usr/bin/pygrub'
disk = ["file:/OVS/seed_pool/OVM_EL5U3_X86_64_PVM_4GB/testrac1.img,hda,w"]
memory = '8192'
name = 'devrac1'
on_crash = 'restart'
on_reboot = 'restart'
vcpus = 4
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0']
vif = ['mac=00:16:3e:32:ca:d3']
When I restarted whole VM server then the guest created before did not come up.
# xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 543 8 r----- 7226.7
Your help is appreciated. Thanks.
as09 wrote:
When I restarted whole VM server then the guest created before did not come up.Add a symbolic link to your vm.cfg in */etc/xen/auto*. This will tell Xen to automatically start the guest when the server starts.
Similar Messages
-
Failed to install VirtualBox Guest Addition on Oracle Linux 6.1
I can successfully install Oracle Linux 6.1 on VirtualBox 4.1. But failed to install VirtualBox Guest Additions with the following message: Building the main Guest Additions module [FAILED]. All other modules installed ok.
Actually you don't have do install the developer version. According to the documentation http://www.virtualbox.org/manual/ch04.html you will need to install gcc and kernel-devel packages. In case Oracle Enterprise Linux does not find the required packages, you either have to install them from a different source (e.g. DVD) or use Oracle's public Yum server located at http://public-yum.oracle.com.
-
MacPro seemingly random Auto-Restart with Premiere
I have a MacPro 3,1 with 10.10 and 32GB RAM.
During video editing in Premiere CC 2014, the computer has auto-restarted twice in the past hour. Both times, I was doing something different in Premiere, so I'm unsure as to what triggered it. I also noticed that now, two of my 4GB DIMMs are not recognized. (note: all DIMMs have tested positively with Rember, and are of the same manufacturer) In the meantime, I have removed the two DIMMs in question and now have four DIMMs on the top riser, two on bottom. The two slots that have caused problems seem to be fine now, but with every restart, things changes—that's why I do not believe the issue to be the actual DIMMs themselves.
I do not know how to interpret these crash reports, but I need to rule out issues in the crash report if there are any. I HOPE the problem is with the RAM and not one of the risers.
Anonymous UUID: D0E49D20-30B1-713B-A6FC-CC1E719024DE
Thu Nov 13 10:13:49 2014
*** Panic Report ***
Machine-check capabilities: 0x0000000000000806
family: 6 model: 23 stepping: 6 microcode: 1551
signature: 0x10676
Intel(R) Xeon(R) CPU X5472 @ 3.00GHz
6 error-reporting banks
Processor 0: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC5_STATUS(0x415): 0xb200001084200e0f
Processor 1: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC5_STATUS(0x415): 0xb200001080200e0f
Processor 2: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC5_STATUS(0x415): 0xb200000084200e0f
Processor 3: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC5_STATUS(0x415): 0xb200000080200e0f
Processor 4: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC5_STATUS(0x415): 0xb200001084200e0f
Processor 5: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC5_STATUS(0x415): 0xb200001080200e0f
Processor 6: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC5_STATUS(0x415): 0xb200000084200e0f
Processor 7: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC5_STATUS(0x415): 0xb200000080200e0f
panic(cpu 0 caller 0xffffff801501f12a): "Machine Check at 0xffffff7f973870b4, registers:\n" "CR0: 0x000000008001003b, CR2: 0x0000000321ba3000, CR3: 0x0000000017b3b000, CR4: 0x0000000000002660\n" "RAX: 0x00000000000000ff, RBX: 0x00000000000081a4, RCX: 0xffffff833f58d037, RDX: 0xffffff831f507c90\n" "RSP: 0xffffff831f507c60, RBP: 0xffffff831f507c60, RSI: 0x0000000000000000, RDI: 0x0000000000000000\n" "R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000002000, R11: 0x00000000e0000000\n" "R12: 0x00000000000081a4, R13: 0x0000000000000000, R14: 0x0000000000008100, R15: 0x0000000000000004\n" "RFL: 0x0000000000000093, RIP: 0xffffff7f973870b4, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/trap_native.c:1 68
Backtrace (CPU 0), Frame : Return Address
0xffffff831f513cf0 : 0xffffff8014f3a811
0xffffff831f513d70 : 0xffffff801501f12a
0xffffff831f513ed0 : 0xffffff801503acef
0xffffff831f507c60 : 0xffffff7f9738567a
0xffffff831f507cc0 : 0xffffff7f9738437c
0xffffff831f507ce0 : 0xffffff7f96f79aa3
0xffffff831f507d10 : 0xffffff7f96f7910b
0xffffff831f507d80 : 0xffffff7f96f783a6
0xffffff831f507dd0 : 0xffffff7f9738db22
0xffffff831f507e00 : 0xffffff7f9739e45c
0xffffff831f507e30 : 0xffffff7f9739e22e
0xffffff831f507e90 : 0xffffff7f973a0482
0xffffff831f507ec0 : 0xffffff80154f97cf
0xffffff831f507f00 : 0xffffff7f97352add
0xffffff831f507f50 : 0xffffff7f97384db4
0xffffff831f507f60 : 0xffffff7f9738ceeb
0xffffff831f507f80 : 0xffffff801501dd25
0xffffff831f507fd0 : 0xffffff801503a609
0xffffff8348f43f40 : 0xffffff8014f514bb
0xffffff8348f43f90 : 0xffffff8014f51970
0xffffff8348f43fb0 : 0xffffff80150192c7
Kernel Extensions in backtrace:
com.apple.driver.AppleACPIPlatform(3.1)[7CBF1E7C-6810-3D0B-B5D2-49B649192B1F]@0 xffffff7f9737e000->0xffffff7f973dcfff
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f967f6000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f95724000
com.apple.driver.AppleAPIC(1.7)[E0CFC402-9876-3C6D-8737-C9EB3655440D]@0xffffff7 f97351000->0xffffff7f97353fff
com.apple.driver.AppleMCEDriver(1.1.9)[E99D56BE-A1E5-3F10-8BD7-19E9A7EC0208]@0x ffffff7f96f77000->0xffffff7f96f7bfff
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f967f6000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000014c00000
Kernel text base: 0xffffff8014e00000
__HIB text base: 0xffffff8014d00000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 1344576750570
last loaded kext at 459995551862: com.apple.filesystems.smbfs 3.0.0 (addr 0xffffff7f973fe000, size 389120)
last unloaded kext at 332143175878: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f973fe000, size 61440)
loaded kexts:
com.blackmagic-design.desktopvideo.iokit.driver 10.2.1
com.blackmagic-design.desktopvideo.iokit.framebufferdriver 10.2.1
com.ATTO.driver.ATTOExpressSASRAID2 3.1.5
com.apple.filesystems.smbfs 3.0.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.GeForce 10.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleIntel8254XEthernet 3.1.4b1
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.nvidia.driver.NVDAGK100Hal 10.0.0
com.apple.nvidia.driver.NVDAResman 10.0.0
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOSurface 97
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleUSBHIDMouse 185.3
com.apple.driver.AppleHIDMouse 185.3
com.apple.driver.AppleUSBHIDKeyboard 175.5
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOATAFamily 2.5.3
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 24 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x333648544635313237324638304545314434
Memory Module: DIMM Riser B/DIMM 2, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x02BA, 0x202020202020202020202020202020202020
Memory Module: DIMM Riser A/DIMM 1, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x333648544635313237324638304545314434
Memory Module: DIMM Riser A/DIMM 2, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x333648544635313237324638304545314434
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x333648544635313237324638304545314434
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x333648544635313237324638304545314434
Bluetooth: Version 4.3.0f10 14890, 3 services, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: Intensity Pro, Video, Slot-2
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressSAS R680, RAID Controller, Slot-4
PCI Card: pci1b4b,9182, AHCI Controller, Slot-3@9,0,0
PCI Card: pci1b4b,9182, AHCI Controller, Slot-3@8,0,0
Serial ATA Device: WDC WD5000AADS-00S9B0, 500.11 GB
Serial ATA Device: WDC WD1002FAEX-00Y9A0, 1 TB
Serial ATA Device: WDC WD1002FAEX-00Y9A0, 1 TB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: Keyboard Hub
USB Device: Apple Optical USB Mouse
USB Device: Apple Keyboard
USB Device: USB2.0 MFP(Hi-Speed)
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
Thunderbolt Bus:Bad DIMM removed. I now have 4 DIMMs on Riser A, 2 on B. But this RAM is just all. over. the. place! Check out these screenshots that "tell the story" of these DIMMs.
11/13 3:47PM - Two unrecognized on A, one error on B
11/14 2:47PM - All is well? Really?
(removed the bad DIMM)
11/17 9:53AM - Two unrecognized on A, two on B are removed.
Today's screenshot was taken moments after the computer restarted itself twice upon opening Adobe Premiere. Here's another EtreCheck:
EtreCheck version: 2.0.11 (98)
Report generated November 17, 2014 at 10:12:56 AM EST
Hardware Information: ℹ️
Mac Pro (Early 2008) (Verified)
Mac Pro - model: MacPro3,1
2 3 GHz Quad-Core Intel Xeon CPU: 8-core
16 GB RAM Upgradeable
DIMM Riser B/DIMM 1
4 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 2
4 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 1
4 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 2
4 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 3
empty empty empty empty
DIMM Riser B/DIMM 4
empty empty empty empty
DIMM Riser A/DIMM 3
empty empty empty empty
DIMM Riser A/DIMM 4
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Video Information: ℹ️
NVIDIA GeForce GTX 680 - VRAM: 2048 MB
S273HL spdisplays_1080p
S273HL spdisplays_1080p
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:33:27
Disk Information: ℹ️
WDC WD5000AADS-00S9B0 disk3 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Macintosh HD (disk3s2) /Volumes/Macintosh HD : 499.25 GB (180.28 GB free)
Recovery HD (disk3s3) <not mounted> [Recovery]: 650 MB
WDC WD1002FAEX-00Y9A0 disk1 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
R2D2 (disk1s2) /Volumes/R2D2 : 999.86 GB (564.07 GB free)
WDC WD1002FAEX-00Y9A0 disk2 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Yosemite (disk2s2) / [Startup]: 999.35 GB (663.25 GB free)
Recovery HD (disk2s3) <not mounted> [Recovery]: 650 MB
eSATA-2 ExternalRAID disk0 : (2 TB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 32 KB
GAOD_2tb (disk0s3) /Volumes/GAOD_2tb : 2.00 TB (465.34 GB free)
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
EPSON USB2.0 MFP(Hi-Speed)
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.ATTO.driver.ATTOExpressSASRAID2 (3.1.5 - SDK 10.8) Support
[loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.2.1 - SDK 10.9) Support
[loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.2.1 - SDK 10.9) Support
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.2.1 - SDK 10.9) Support
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.2.1 - SDK 10.9) Support
[not loaded] com.blackmagic-design.driver.BlackmagicUsbIO (10.2.1 - SDK 10.9) Support
[not loaded] com.gretagmacbeth.EyeOne.NoClassic (1.0.0) Support
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.2.1 - SDK 10.9) Support
/System/Library/Extensions
[not loaded] com.GoPro.driver.GoProKext (1 - SDK 10.5) Support
[not loaded] com.Newer.kext.MAXPower_eSATA_6G_RAID (1.1.0) Support
[not loaded] com.highpoint-tech.kext.rr64xl (1.0.1 - SDK 10.6) Support
[loaded] com.nvidia.CUDA (1.1.0) Support
[not loaded] com.sonnettech.driver.SonnetSATA (2.2.9) Support
[not loaded] com.sony.filesystem.prodisc_fs (2.3.0) Support
[not loaded] com.sony.protocol.prodisc (2.3.0) Support
/System/Library/Extensions/SonnetSATA.kext/Contents/PlugIns
[not loaded] com.sonnettech.SonnetSATABlockStorage (2.2.9) Support
/Users/[redacted]/Library/Application Support/Sparkle/Transmit/Transmit 4.1.9 Update/Transmit.app
[not loaded] com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.5) Support
/Volumes/R2D2/Macintosh HD/Users/adam/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
Hptibmsvr: Path: /Library/StartupItems/Hptibmsvr
Hptsvr: Path: /Library/StartupItems/Hptsvr
Nwtsvr: Path: /Library/StartupItems/Nwtsvr
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[running] com.attotech.attonfcd.plist Support
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[invalid?] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.attotech.attocfgd.plist Support
[running] com.attotech.fan-controllerd.plist Support
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist Support
[running] com.blackmagic-design.DesktopVideoHelper.plist Support
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist Support
[loaded] com.bombich.ccc.plist Support
[not loaded] com.bombich.ccc.scheduledtask.C01D850D-6DC2-42A6-9D17-89BF6EAF7241.plist Support
[failed] com.edb.launchd.postgresql-8.4.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.nvidia.cuda.launcher.plist Support
[invalid?] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[running] com.bombich.ccc-user-agent.plist Support
[loaded] com.digitalrebellion.PreferenceManagerAutoSave.plist Support
[invalid?] com.digitalrebellion.SoftwareUpdateAutoCheck.plist Support
[loaded] com.redgiantsoftware.updater.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
Aspera Web: Version: (null) Support
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.9 - SDK 10.5 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 Support
DirectorShockwave: Version: 11.6.8r638 Support
User Internet Plug-ins: ℹ️
NugsterPlugin: Version: (null) - SDK 10.7 Support
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video Support
CUDA Preferences Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Perian Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
6% WindowServer
2% Google Chrome
0% SystemUIServer
0% fontd
0% AppleSpell
Top Processes by Memory: ℹ️
1.48 GB Adobe Premiere Pro CC 2014
429 MB mds_stores
172 MB Google Chrome
120 MB Google Chrome Helper
103 MB Creative Cloud
Virtual Memory Information: ℹ️
9.91 GB Free RAM
4.88 GB Active RAM
1.04 GB Inactive RAM
1.36 GB Wired RAM
3.35 GB Page-ins
0 B Page-outs -
Hi,
is there any possibility to setup VM guest boot order in Oracle Vm server. For example i have VMs 1,2,3 and when the Oracle Vm server is restarted, i want the VM guests to boot automatically in the following order:
VM2(database)
VM3(Forms & reports)
VM1(BI pubisher).
regards,
SavoHi there Savo,
the only approach I am aware of is to create symbolic links in
/etc/xen/auto to point to the respective guests' cfg file. Though you
can play around with naming the links to accomplish proper boot order,
you still may experience issues as the hypervisor will start the
machines but the individual time for loading OS and other software may
vary. Based on this you may have one machine started before another, but
the second to start all services faster than the first one. Hence,
having issues.
Take a look at this threa <https://community.oracle.com/thread/2446485>d
and pay attention to the last post as I have not tried it.
In general both approaches will impose a great level of inflexibility in
a clustered pool as you have to carefully plan where each machine will
start after dom0 reboots.
Hope this helps,
Anatoli -
IMP-00017: following statement failed with ORACLE error 1658
Hi All,
Please help me to find the reason of this error while importing the export file using parameters full=Y,ignore=n.
IMP-00003: ORACLE error 1658 encountered
ORA-01658: unable to create INITIAL extent for segment in tablespace USERS
IMP-00017: following statement failed with ORACLE error 1658:
"CREATE TABLE "TABLE_NAME" ("SEGMENTID" VARCHAR2(10) NOT NULL EN"
"ABLE, "DRIVERID" VARCHAR2(10) NOT NULL ENABLE, "VEHICLEID" VARCHAR2(10) NOT"
" NULL ENABLE, "START_TIME" VARCHAR2(6) NOT NULL ENABLE, "END_TIME" VARCHAR2"
"(6) NOT NULL ENABLE, "REPORT_TIME" VARCHAR2(6) NOT NULL ENABLE, "DISPOSITIO"
"N" VARCHAR2(1), "S_LOCATION1" VARCHAR2(12), "S_LOCATION2" VARCHAR2(60) NOT "
"NULL ENABLE, "S_LOCATION3" VARCHAR2(12), "S_LOCATION_ENT" VARCHAR2(30), "S_"
"CITYTOWN" VARCHAR2(30) NOT NULL ENABLE, "S_ZIP" VARCHAR2(10) NOT NULL ENABL"
"E, "S_STATEPRO" VARCHAR2(4) NOT NULL ENABLE, "S_COUNTRY" VARCHAR2(2), "S_CO"
"MNTS" VARCHAR2(1), "S_GRID_LAT" NUMBER(10, 6), "S_GRID_LONG" NUMBER(10, 6),"
" "E_LOCATION1" VARCHAR2(12), "E_LOCATION2" VARCHAR2(60) NOT NULL ENABLE, "E"
"_LOCATION3" VARCHAR2(12), "E_LOCATION_ENT" VARCHAR2(30), "E_CITYTOWN" VARCH"
"AR2(30) NOT NULL ENABLE, "E_ZIP" VARCHAR2(10) NOT NULL ENABLE, "E_STATEPRO""
" VARCHAR2(4) NOT NULL ENABLE, "E_COUNTRY" VARCHAR2(2), "E_COMNTS" VARCHAR2("
"1), "E_GRID_LAT" NUMBER(10, 6), "E_GRID_LONG" NUMBER(10, 6), "COMMENTS" VAR"
"CHAR2(200), "STATE" NUMBER(*,0), "OPER_ID" VARCHAR2(20), "UNQ_ID" VARCHAR2("
"40), "DESCR" VARCHAR2(200), "S_COUNTY" VARCHAR2(30), "E_COUNTY" VARCHAR2(30"
")) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FRE"
"ELISTS 1 FREELIST GROUPS 1) TABLESPACE "USERS" LOGGING"
Again the next one is
IMP-00003: ORACLE error 376 encountered
ORA-00376: file 7 cannot be read at this time
ORA-01110: data file 7: 'D:\ORACLE\ORADATA\ITMS\USERS01.DBF'
IMP-00017: following statement failed with ORACLE error 376:
"CREATE INDEX "TDR_INDX" ON "ITMS_SCHED_TRIPS" ("SEGMENTID" , TRUNC("TRAVELDAT"
"E") ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1"
" FREELIST GROUPS 1) TABLESPACE "INDX" NOLOGGING"
Thanks in advance.
AbhijeetHi,
Please check whether you have permission to write on this 'D:\ORACLE\ORADATA\ITMS\USERS01.DBF' .
Also please check if that file is actually present there or not...?
Error ORACLE error 1658 means that either your datafile has filled completely and its not set to auto extend OR hard disk where that file is residing is full and oracle cannot allocate the minimum memory to the segment that is Extent
Regards -
[SOLVED] NetworkManager auto restart even though I stop it.
Hi,
I enable NetworkManager at system boot.
# systemctl enable NetworkManager.service
After I stop NetworkManager manually, and run chromium/firefox, it restart NetworkManager again.
# systemctl stop NetworkManager
> Active: inactive (dead) since Fri, 12 Oct 2012 12:37:51 +0800; 24min ago
$ chromium
! NetworkManager auto restarted.
# sysetmctl status NetworkManager
> Active: active (running) since Fri, 12 Oct 2012 12:44:13 +0800; 17min ago
After a little dig by myself, I found out the restart was called by D-Bus.
$ journalctl _SYSTEMD_UNIT=dbus.service -f
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Oct 12 12:44:13 -- dbus[566]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Oct 12 12:44:13 -- dbus[566]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Oct 12 12:44:13 -- dbus[566]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Successfully activated service 'org.freedesktop.NetworkManager'
Oct 12 12:44:13 -- dbus[566]: [system] Successfully activated service 'org.freedesktop.NetworkManager'
So, my problem is, How can I stop NetworkManager permanently?, so that I can use both netcfg and NetworkManager side by side, but I don't want to disable NetworkManager at system boot.
Thanks for any help.
Last edited by GutenYe (2012-10-13 00:59:23)I finally found same issue and solution at https://bugzilla.redhat.com/show_bug.cgi?id=815243
If you want to disable NetworkManager auto-restart feature, follow bellow
# cp /usr/lib/systemd/system/NetworkManager.service /etc/systemd/system
# vi /etc/systemd/system/NetworkManager.service
#Alias=dbus-org.freedesktop.NetworkManager.service # comment it.
# rm /etc/systemd/system/dbus-org.freedesktop.NetworkManager.service
Thanks for the helping.
Last edited by GutenYe (2012-10-13 00:59:04) -
PSWATCHSRV does not auto-restart causing app server domain instability
Current environment:
- Solaris 10
- Oracle 10.2.0.4
- PS HRCS 9.0
- PTools 8.49.19
- Weblogic 9.2
- Tuxedo 9.1
We have two PIA web sites that reside on the same PIA web domain. They each interact with a different app server domain residing on csapp81. One is assigned a jolt listening port of 9060 (CS90SBX) and the other uses 9030 (CS90UNT). Recently, after patching the PTools to 8.49.19, we discovered that occasionally the PSWATCHSRV in one of the app server domains will shut down and not restart. The domain continues to run without the WATCHSRV but then erratic behavior in the PIA is observed:
- Users attempting to access worklists are logged off
- Reports stop posting from PSNT and PSUNX
- Users attempting to navigate to reports already posted are logged off with "An Error Has Occurred" message
- Some users are unable to log in and see a message in red on the signon page: bea.jolt.ServiceException
Re-booting the app server domain will solve the problem temporarily until the PSWATCHSRV shuts down again. We have noticed that in the app server that is not affected, the PSWATCHSRV restarts one second after shutting down whereas in the affected domain it never auto-restarts. We have tried re-building the web server and app server domains but this does not affect the problem. There appears to be no difference between the two domains. In fact a couple of weeks earlier SBX was working fine and UNT was affected. Now it's the exact opposite and we have another environment (CFG) showing the same behavior.
The proof the problem exists:
Verified the issue by the application server log file <APPSRV_0602_SBX.LOG>, which displays that PSWATCHSRV has been shutdown and never restarted:
PSAPPSRV.11610 (3) [06/02/09 12:48:40 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=124840_11610.3, Token=PSFT_HR/2009-06-02-05.48.40.000003/PS/ENG AAAAmwECAwQAAQAAAAACvAAAAAAAAAAsAARTaGRyAgBOZQgAOAAuADEAMBTG0ddiK9wa09fTauVpwsrNvqJDmwAAAFsABVNkYXRhT3icPcZNDkAwFEXh02oM7YS8VAkL8DMSwdzILi3O6xu4J/lygcf5IuDQ+Tcb2DlLJjaWKn9mLm5WjkREtJFa7c1odjQkBlNU+Wv5APmFCio=
PSWATCHSRV.11609 (0) [06/02/09 12:52:38] Shutting down
PSAPPSRV.11612 (29) [06/02/09 12:55:45 [email protected] (NETSCAPE 7.0; WINXP) ICPanel](3) (PublishSubscribe): PublicationManager::Publish(): publication a18e2838-4f31-11de-9268-83dc49eeb5cf.USER_PROFILE published in 0.0900 seconds
My question is: Has anyone else ever seen this behavior in an 8.49.19 environment? If so, how was it resolved?
We are now conducting UAT and the occasional disruption of having to restart the app server just so people can login to the system is not making a good impression on the customer.
We have an open SR ticket with Support but as yet they have not been able to help us...Looks like Tuxedo is not doing he's job. You should double check the Tuxedo version and rolling patch installed.
And also the configuration of AppServer, section "PSWATCHSRV", if the interval is set to 0, then it is disabled.
Moreover, from your output it is difficult to understand what's going wrong.
Nicolas. -
How do I configure Sever 10.4.6 to auto restart particular applications? I have already enabled energy saver to restart automatically if it loses power or "freezes" but also need to restart some apps if they quit unexpectedly.
Thanks.It depends on how you're starting the apps in question.
If you're manually starting the app then you have to manually watch it and restart it if it fails.
If you're using a startup script to start your app then you either need a wrapper script that calls the app (and deals with failover) or you need a second script to sit in the background watching the app and restarting it as necessary.
If you're using launchd to start your app, it's automatic. man launchd or more information on using launchd, and man launchd.plist for information on writing your own launchd control file. -
Auto restart node manager connection
Hi,
when we try to restart all server with auto restart scripts way.following error come:-
[oracle@acldlu01oam bin]$ cd /home/oracle/scripts/AutoRestart/
[oracle@acldlu01oam AutoRestart]$ ls
AdminServer.py config ServerStatus.py startManualNode.sh startupOAM.sh
bin security ServerStop.py startScripts.sh
[oracle@acldlu01oam AutoRestart]$ ./startScripts.sh status
CLASSPATH=/u01/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_cla sspath/weblogic_patch.jar:/u01/oracle/Middleware/patch_ocp371/profiles/default/s ys_manifest_classpath/weblogic_patch.jar:/u01/oracle/jdk1.7.0_67/lib/tools.jar:/ u01/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/oracle/Middl eware/wlserver_10.3/server/lib/weblogic.jar:/u01/oracle/Middleware/modules/featu res/weblogic.server.modules_10.3.6.0.jar:/u01/oracle/Middleware/wlserver_10.3/se rver/lib/webservices.jar:/u01/oracle/Middleware/modules/org.apache.ant_1.7.1/lib /ant-all.jar:/u01/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ ant-contrib.jar::/u01/oracle/Middleware/utils/config/10.3/config-launch.jar::/u0 1/oracle/Middleware/wlserver_10.3/common/derby/lib/derbynet.jar:/u01/oracle/Midd leware/wlserver_10.3/common/derby/lib/derbyclient.jar:/u01/oracle/Middleware/wls erver_10.3/common/derby/lib/derbytools.jar::
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to Node Manager ...
<Feb 24, 2015 11:16:12 PM CST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable thi s check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 24, 2015 11:16:12 PM CST> <Info> <Security> <BEA-090906> <Changing the defa ult Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disabl e this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 E ntrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Ent rust\, Inc.,C=US". The loading of the trusted certificate list raised a certific ate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1 .2.840.113549.1.1.11.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US ". The loading of the trusted certificate list raised a certificate parsing exce ption PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1. 1.11.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=thawte Primary Root CA - G2,OU=(c) 2007 thawte\, Inc. - For authorized use only,O=thawte\, Inc.,C=US". The loading of the trusted certi ficate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.10045.4.3.3.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=Buypass Class 3 Root CA,O=Buypass AS-983163327,C=NO". T he loading of the trusted certificate list raised a certificate parsing exceptio n PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11 .>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=Buypass Class 2 Root CA,O=Buypass AS-983163327,C=NO". T he loading of the trusted certificate list raised a certificate parsing exceptio n PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11 .>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center, O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certifica te list raised a certificate parsing exception PKIX: Unsupported OID in the Algo rithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center, O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certifica te list raised a certificate parsing exception PKIX: Unsupported OID in the Algo rithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=VeriSign Class 3 Public Primary Certification Authority - G4,OU=(c) 2007 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Ne twork,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raise d a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifi er object: 1.2.840.10045.4.3.3.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". Th e loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. >
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO .\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.8 40.113549.1.1.11.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=AffirmTrust Commercial,O=AffirmTrust,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Un supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriS ign\, Inc.,C=US". The loading of the trusted certificate list raised a certifica te parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1. 2.840.113549.1.1.11.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=AffirmTrust Premium ECC,O=AffirmTrust,C=US". The loadin g of the trusted certificate list raised a certificate parsing exception PKIX: U nsupported OID in the AlgorithmIdentifier object: 1.2.840.10045.4.3.3.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loadin g of the trusted certificate list raised a certificate parsing exception PKIX: U nsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 20 08 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsup ported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=GeoTrust Primary Certification Authority - G2,OU=(c) 20 07 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsup ported OID in the AlgorithmIdentifier object: 1.2.840.10045.4.3.3.>
<Feb 24, 2015 11:16:12 PM CST> <Notice> <Security> <BEA-090898> <Ignoring the tr usted CA certificate "CN=AffirmTrust Premium,O=AffirmTrust,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsup ported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.12.>
This Exception occurred at Tue Feb 24 23:16:12 CST 2015.
weblogic.nodemanager.NMConnectException: Connection refused. Could not connect t o NodeManager. Check that it is running at localhost:5556.
Problem invoking WLST - Traceback (innermost last):
File "/home/oracle/scripts/AutoRestart/ServerStatus.py", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 648, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : Connection refused. Could not connect to NodeManager. Check that it is running at localhost:5556.
Use dumpStack() to view the full stacktrace
could you please help.
Thanks,
HireshHi Radu,
I write python scripts for getting server status and scripys is:
nmConnect(username='weblogic',password='welcome1',domainName='oam_domain')
#,host='acldlu01oam.corp.vha.com')
#nmConnect('weblogic','welcome1','acldlu01oam.corp.vha.com','5556','oam_domain','/u01/oracle/Middleware/user_projects/domains/oam_domain','ssl')
print "NodeManager connected.."
print " Admin Server is : "
nmServerStatus(serverName='AdminServer')
print " OAM Server is : "
nmServerStatus('oam_server1')
print "End of script"
but output we get:-
[oracle@acldlu01oam AutoRestart]$ ./startScripts.sh status
CLASSPATH=/u01/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/oracle/jdk1.7.0_67/lib/tools.jar:/u01/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/u01/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/u01/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/u01/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/u01/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/u01/oracle/Middleware/utils/config/10.3/config-launch.jar::/u01/oracle/Middleware/wlserver_10.3/common/derby/lib/derbynet.jar:/u01/oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/u01/oracle/Middleware/wlserver_10.3/common/derby/lib/derbytools.jar::
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to Node Manager ...
<Feb 25, 2015 4:37:57 AM CST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 25, 2015 4:37:57 AM CST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G2,OU=(c) 2007 thawte\, Inc. - For authorized use only,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.10045.4.3.3.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Buypass Class 3 Root CA,O=Buypass AS-983163327,C=NO". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Buypass Class 2 Root CA,O=Buypass AS-983163327,C=NO". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Class 3 Public Primary Certification Authority - G4,OU=(c) 2007 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.10045.4.3.3.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=AffirmTrust Commercial,O=AffirmTrust,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=AffirmTrust Premium ECC,O=AffirmTrust,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.10045.4.3.3.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G2,OU=(c) 2007 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.10045.4.3.3.>
<Feb 25, 2015 4:37:57 AM CST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=AffirmTrust Premium,O=AffirmTrust,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.12.>
This Exception occurred at Wed Feb 25 04:37:57 CST 2015.
weblogic.nodemanager.NMConnectException: Connection refused. Could not connect to NodeManager. Check that it is running at localhost:5556.
Problem invoking WLST - Traceback (innermost last):
File "/home/oracle/scripts/AutoRestart/ServerStatus.py", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 648, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : Connection refused. Could not connect to NodeManager. Check that it is running at localhost:5556.
Use dumpStack() to view the full stacktrace
Thanks,
Hiresh -
Like to know how to restart failes patch
Dear all
If any patch fail to apply patch due some reason's how to restart... From some web site i seen that there is option called adctrl is use for restart failed worker.. Now we assume like if the patch completed around 90 % and it taken around 2 hours for that.. Now the remaining 10% only wanna to execute which is taken only ten min to complete now what i wanna to do complete with out start the process from beginning...
Mean while i like to know the difference between adctrl and autopatch restart (i.e the purpose of $APPL_TOP/admin/<SID>/restart ).....
Regards
GopinathHi,
If any patch fail to apply patch due some reason's how to restart... From some web site i seen that there is option called adctrl is use for restart failed worker.. Now we assume like if the patch completed around 90 % and it taken around 2 hours for that.. Now the remaining 10% only wanna to execute which is taken only ten min to complete now what i wanna to do complete with out start the process from beginning...Please see the link
http://beginapps.blogspot.com/2008/04/how-to-apply-11i-patch-when-adpatch-is.html
The above link talks about 11i. It is the same for R12 except the location of restart files in R12 is in $APPL_TOP/admin/<SID>
Mean while i like to know the difference between adctrl and autopatch restart (i.e the purpose of $APPL_TOP/admin/<SID>/restart ).....Please read the documentation
http://docs.oracle.com/cd/B34956_01/current/acrobat/r12adutil.pdf
Breifly
Using adctrl you can control the workers, like quitting them, restarting them checking the status.
The purpose of restart directory is to store the last status of the workers and other information will be needed if patch needs to be restarted next time.
Thanks -
Installation of Oracle Failed on Oracle Enterprise Linux.
Hi All,
I have installed Enterprise Linux Release 5 Update 2 for x86 (32 Bit) provided by oracle e-delivery on my Vmware Virtaul machine.When i try to install Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86,after running the runInstaller i am getting the following error.
[oracle@vmware database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
Note:Oracle E-Delivery has provided 5 CD's to downlaod for Enterprise Linux Release 5 Update 2 for x86 (32 Bit).But the installation of LINUX finished succesfully with 3 CD's only.I donot have any idea for what purpose the remaining CD's 4 and 5.Do i need to install CD's 4 and 5 seperately.Is this the problem for orcle DB installation failure or is there any exclusive database which i need download for Enterprise Linux Release 5 Update 2 for x86 (32 Bit).
Any help in this issue is highly appreciated.
Thank You Very Much.I am also getting the same error as a previous poster:
>>>
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-02_04-31-29PM. Please wait ...[ora10@el5a database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-02-02_04-31-29PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
<<<
I downloaded and installed Oracle EL5 (64 bit). I have a Network-level support, so I ran the up2date and picked up all the updates and installed them. My company is a licensee of 10g, so I downloaded 64bit 10g, and ungzip-uncpio'd it into a work directory. When I try to install it, it blows up at the above point.
In reading the above comments, I rpm'd libXp and libaio, but this does not change the failure of runInstaller.
Any hints?
--Ewin -
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
Auto Restart Issue with Mac Book AIR
Have been using a Macbook PRO for sometime, no problem with Parallel installed. Due to frequent traveling, light and compact is my priority now, so I bought another AIR (11" i7 chip w/ Parallel installed as well). It was working flawlessly for few weeks, used it to download a couple of updates when I was in China (approx. 4Mbit/sec line speed) still no issues. UNTIL when I get back to my office and using WIFI updated another few stuffs, the AIR started to behave strangely with "your computer needs to restart due to problem ..." the last few days it happened at least 10 times daily, so I did what I know with the usual Mac way, reset PRAM, repair permissions blah blah blah ..problems persists so I called the service centre and the technician I talked to suggested the issue could be from 'your moderate internet speed causing incomplete system updated files.' ; half convinced but I followed / reinstalled ...with no CD, it has to press option to select to reinstall -- only then I realized a big problem, originally it states requires 27 hours to reinstall a fresh LION in my AIR but finally it completed and restated in still about MASSIVE 7-1/2 hours time.
As I have bought a USB network connector now (a convenient gadget when stays at hotels with different levels of facilities offered), this is not so troublesome and I think fellow users should consider using network and avoid using WIFI for this purpose. I notice once the left USB once was used (without turning off the WIFI) it keeps breaking the connections, as I read some articles from this forum the left USB could has some stability issues. After all the time spent, the computer freezes at times and auto restarts again. What the heck has this causes the AIR to behave this way ?
NEXT, I also read on the Power issues, I bought it without realizing one of the technical highlight is on high performance battery management but you can chop my head off and sit on mine if the AIR can last 3 hours (probably the suggested time is with computer power on but without using it at all). I don't want to sound un-nice as I have been using Mac for many many years: 1) if AIR is entirely basing on internet (VERY HIGH SPEED) for support is not a really very friendly method for users if there is reliability issues via internet line support, says what if we are caught in remote area with 30k/sec line speed then we are totally dead ... ; 2) the recent scare makes me dare not using the software updates now, as technician suggested, write down what is required to update, find it from apple and do it manually ...Goohs, my Mac Book Pro using side by side doesn't has this issue. Since when was the last time I have to suffer maintaining a Mac myself ? ... @%#&@*!(!
Anyone has clue to these or simply return to service centre to handle for me ?
Thanks in advance (first time user in this community).Hello!
I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
Any sugestion? Big houses are a problem...
Best regards, and once again thank you!
Antonio -
Please Help! My MB pro 2010 quit and auto restart when I upgrade my MB Pro with a SSD
Hi all!
Please let me know what's happen with my Mac & help me to solve this problem pls?
Since my Mac is on normall working but a little bit slow. So that's why I update it to SSD. But from that day, when I'm working, it suddenly quit & auto restart without reason, just only appear the warning " Your Mac have problem" & restart.....
Attached here is which appeared on my screen after it auto restart, please go throught it & let me know what I should do for avoiding this problem, pls!
And here is my MAC info :
Macbook Pro 15-inch, Mid 2010
Processor 2.4 GHz Intel Core i5
Memory 8 GB 1067 MHz DDR3
Graphics Intel HD Graphics 288 MB
Software OS X 10.8.5 (12F45)
My SSD info:
Total Capacity : 256.1 GB (256,060,514,304 Bytes)
Model : V4-CT256V4SSD2
Firmware Version : S5FAMM22
Drive Type : Crucial SSD
HDD info:
Total Capacity : 320.1 GB (320,072,933,376 Bytes)
Model : Hitachi HTS545032B9SA02
Firmware Version : PB3AC60W
Drive Type : HDD 5400 rpm
Please Help me!
Thank you!Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
Good luck,
Clinton -
Import error imp-00017: following statement failed with oracle error 1659:
Hi all,
I am trying to import a file (dmp) which is of 1.63GB size,
when I type
imp
dbname/pwd@db
c:\filepath
30720
no
no
yes
yes
yes
I am getting the error imp-00017: following statement failed with oracle error 1659:
-- end it says Ora-01659 unable to allocate minextents beyond 1 in tablespace USERS
--unable to create INITIAL extent for segment in tablespace USERS
--import terminated successfully with warnings
when I looked into
select maxbytes,file_name from dba_data_files where tablespace_name='USERS';3.4360+10 c:\oracle\product\10.2.0\oradata\orcl\users01.dbf
kindly help me in solving this is.
Regards,
aak
Edited by: AAK 460425 on Apr 12, 2009 6:33 PMThanks,
select bytes from user_free_space where tablespace_name='USERS'
BYTES
458752
720896
458752
655360
43384832
is the size less?
My apology I have updated this in the below thread, which is same as this one.
Re: Import error
Maybe you are looking for
-
I have the newer version of the macbook pro and I have read the directions on how to authorize your computer to let you download previous song purchases from icloud onto your laptop, but I cannot find where it says "authorize this computer" at all. I
-
I need to get into contact with Adobe support on renewal of my CC subscription which does not work but I cannot find any PHONE number just the referral to this forum - help, what should I do?? Thanks!!
-
Hi there, I have a client who is having problems with their service purchase orders. When someone copies an approved service PO to an invoice/GRPO and they change the GL account on the line level the document loses the link to the PO. This then resul
-
pls assist me that ho can i send picture message ..... find the pic's Moderator's Note: The subject was amended as the post was moved to the appropriate board. Attachments: wp_ss_20130514_0003[2].png 48 KB wp_ss_20130514_0002[1].png 29 KB
-
Can anyone tell me what might have happened? What do I do to fix this?