Auto sync is possible for intermedia indexes?

HI gurus
I understand that normally a database job or cron job has to be created to periodically sync the intermedia indexes.
Is there a way to create indexes in intermedia so that the indexes updated automatically Just like normal index (without any job?)
Regards
Bhaskara

Please ask questions about Oracle Text (formerly interMedia text) in the Oracle Text forum. You will get a quilcker, more expert answer there.

Similar Messages

Too many recursive statements in PRO*C in comparing to SQLPLUS for Intermedia Index.

Hi,
I hope someone can help about this Problem. I don't know ehther its Intermedia Index or Database Problem...
The following Query;
SELECT SCORE(1),D.DOCUMENT_ID,DOCU_DATE_NUM,DOC_TYPE_ID
FROM
DOCUMENT D WHERE CONTAINS(SEARCH_INDEX,:b1,1) > 0 ORDER BY SCORE(1) DESC,
DOCU_DATE_NUM DESC
takes approx 7 sec in SQLPLUS , but in PRO*C it takes approx 55 sec. They call the same PL/SQL Stored Proc including the SQL above returning REF Cursor.
In PROC*C running Program the Trace file contains 139 Statements of:
SELECT/*+INDEX(T "DR$DOCXML_IX$X")*/ DISTINCT TOKEN_TEXT FROM "GETINFO"."DR$DOCXML_IX$I" T WHERE TOKEN_TEXT LIKE :lkexpr and TOKEN_TYPE NOT IN (1, 2, 5)
but in SQLPLUS generated Trace File it has only 18 of the Statement.
The TKPROF Report for PRO*C is:
SELECT SCORE(1),D.DOCUMENT_ID,DOCU_DATE_NUM,DOC_TYPE_ID
FROM
DOCUMENT D WHERE CONTAINS(SEARCH_INDEX,:b1,1) > 0 ORDER BY SCORE(1) DESC,
DOCU_DATE_NUM DESC
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 33.37 33.72 3 94 0 0
Fetch 44 0.04 0.04 29 69 4 43
total 46 33.41 33.76 32 163 4 43
For SQLPLUS:
SELECT SCORE(1),D.DOCUMENT_ID,DOCU_DATE_NUM,DOC_TYPE_ID
FROM
DOCUMENT D WHERE CONTAINS(SEARCH_INDEX,:b1,1) > 0 ORDER BY SCORE(1) DESC,
DOCU_DATE_NUM DESC
call count cpu elapsed disk query current rows
Parse 1 0.01 0.01 0 0 0 0
Execute 1 4.36 4.37 0 0 0 0
Fetch 44 0.02 0.02 10 44 0 43
total 46 4.39 4.40 10 44 0 43
Why is there so much difference? Even if they both do HARD Parse for the SQL above or run the same Stored Proc many times with "ALTER SESSION SET SESSION_CACHED_CURSORS=10", the difference in Time is the same.
Can someone help about this, I think it is an important Tuning Problem for Intermedia Index or ORACLE Bug maybe...

Hi,
Thanks for answering.
Yes I'm sure , both of them are using the same bind variables and it is:
(FUZZY($INTERNATIONAL) AND FUZZY($JOURNAL) AND FUZZY($ELECTRONICS) AND FUZZY($COMMUNICATIONS)) WITHIN SERIES_TITLE';
The same Query takes too long in Unix SQL*PLUS (~ 54 secs) also, but in Windows SQL*PLUS its faster (~ 7 secs).
Bu t if I chabe the Bind Variable as :
STR := '(($INTERNATIONAL OR ?INTERNATIONAL) AND ($JOURNAL OR ?JOURNAL) AND ($ELECTRONICS OR ?ELECTRONICS) AND ($COMMUNICATIONS OR ?COMMUNICATIONS)) WITHIN SERIES_TITLE';
then its in both Environment faster and nearly the same. But its not the same as the previous one.
I think the problem is when using the search as ?$<Word> (Fuzzy Stem together). But not everytime. Do you think its a Bug?

Unable to turn on auto sync using link for windows

When trying to select files to auto sync, I am unable to check the boxes. What can be causing this and how can I fix?

Hi dtomp79,
Welcome to the support community!
Which type of files are you trying to synchronize automatically? Media files or organizer data from Microsoft Outlook? Are you able to manually sync these files with the automatic sync check box not selected?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Auto Sync in iTunes for iPhone 3G

I have an iPhone 3G. Under summary > options, "automatically sync when this iPhone is connected" is grayed out so I can't select it. Can anybody tell me why?

You have to have contacts and calendar apps set up on your computer. The 3G and then the iPad will sync to those apps.

Need to disable auto sync

When I originally got itunes, I had it set to automatically sync when I connected my ipod. Now that I have an iphone, I do not want it to auto sync, but I can't find how to change that setting. How can I disable the auto sync in itunes for Windows (Vista)? Thanks.

Look under Edit --> Preferences and then look up at the top of that window - there are a number of choices (General, Playback, Sharing, etc.) - click on Devices and then look down about halfway down the page - there is a place you can click to "prevent ipods, iphones ipads from syncing automatically" - hope that works for you.

How to set olite auto sync time interval

Hi all,
How to set the auto sync time interval for a publication item, publication or to a user.
Can anyone tell me, which one is best among setting the auto syncing and syncing with the code.
I am searching for the code to sync in java only upload or download and both. I tried with some code but it is giving me oracle.lite.mSync.SyncException: AES encryption error.
Thanks in advance,
Khadaree

Bonjour,
Même demande ;-)

Modify repeat_interval for Auto Sync Jobs

Is it "permitted/supported" to modify the repeat_interval for Auto Sync Index jobs created when using the syntax SYNC(EVERY "SYSDATE + 30/86400") which give a repeat interval of 30 seconds
I do not want to have partitions older than a (sysdate-3) days and none greater than "sysdate" to be running. I create new partitions daily and so would like to start/stop partition jobs for the sync window. If I get data outside the window, say 7 days old, then I would run that specific partition sync manually.
Is there a way to define the interval to be a moving window?
Regards

There is a Job created for each partition. There is a repeat_interval parameter set for the Job from the SYNC(EVERY ...) The memory and degreel_parallel parameters go into the Job PLSQL definition
If you change the index then the value in the parameters column from user_ind_partitions only has the most recent value (it seems) and eventually it can get confusing.
REPEAT_INTERVAL is a JOB thing and modifying that works just as well **and** keeps the parameters values intact as when the index was created.
Also, I found **and** it could be something in the syntax I had, that if I had loaded data and the job had not kicked in yet, I could not modify the index for any partition. We load data continuously and we have daily*4 partitions (for 5 years). So quite a few partitions and Jobs. Disabling a Job would be much simpler.

Hi at the moment my ipod is on manual sync mode. Is there any way of changing this to auto-sync without losing the music on my ipod or library? Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?

Hi at the moment my ipod is on manual sync mode. Is there any way of changing this to auto-sync without losing the music on my ipod or library? Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
This is so I can delete music from my ipod knowing its rated on my i-tunes so I can then see later if I want to re-add it based on its rating
Thanks

Is there any way of changing this to auto-sync without losing the music on my ipod or library?
Unfortunately there is not.
Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
Not without the help of third party software such as this one:
http://www.copytrans.net/copytrans.php
B-rock

TS3297 Is it possible for itunes on my MacBook Pro to play songs off my networked WD external hard drive and sync to my iPhone? I prefer to not keep all my music on my laptop and I don't want to pay $25 a year to access my songs if I don't have to.

Is it possible for itunes on my MacBook Pro to play songs off my networked Western Drive external hard drive so I can sync to my Mac to my iPhone? I do not want to keep any music on my laptop and I don't want to pay $25 to itunes match a year to access my songs if I don't have to.

Hi turingtest2,
Thank you for replying. I've been looking at your posts about setting up iTunes using an external drive. A bit of background info. My old computer broke down, so I got a new one from work. I've always kept my music files on my external drive (I have around 170GB of music). I didn't follow the suggestions in the "migrate iTunes library" post because my old computer died on me. However, I've looked at your posts about lay out of the iTunes folders. Before connecting to iTunes on the new computer, I had reorganized my iTunes folder on my E: external drive, and created an iTunes folder which contains an iTunes Media subfolder. The music files are in a Music folder, which is in the iTunes Media folder. I've also put the following files in my iTunes folder: iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, iTunes Music Library.xml, as well as sentinel. I then followed the advice you gave bmw99 on 2 Nov 2013 at 9.58 (sorry, can't copy the exact answer).
Just to clarify: I'd like to keep all my music media on the E: external hard drive (the computer hard drive is too small), and I'm aware i might never have my playlists back, and that all the songs in my library might be ticked. However, I don't want my library to be duplicated.
I'm at work at the moment, but will be back home in about 10 hours, so I can be more specific about folders / files names.
I'm glad you picked up my message and greatly appreciate your help.
Patrice

How is it possible to use Index Seek for LIKE %search-string% case?

Hello,
I have the following SP:
CREATE PROCEDURE dbo.USP_SAMPLE_PROCEDURE(@Beginning nvarchar(15))
AS
SELECT * FROM HumanResources.Employee
WHERE NationalIDNumber LIKE @Beginning + N'%';
GO
If I run the sp first time with param: N'94', then the following plan is generated and added to the cache:
SQL Server "sniffs" the input value (94) when compiling the query. So for this param using Index Seek for AK_Employee_NationalIDNumber index will be the best option. On the other hand, the query plan should be generic enough to be able to handle
any values specified in the @Beginning param.
If I call the sp with @Beginning =N'%94':
EXEC dbo.USP_SAMPLE_PROCEDURE N'%94'
I see the same execution plan as above. The question is how is it possible to reuse this execution plan in this case? To be more precise, how
Index Seek can be used in case LIKE %search-string% case. I expected that
ONLY Index Scan operation can be used here.
Alexey

The key is that the index seek operator includes both seek (greater than and less than) and a predicate (LIKE). With the leading wildcard, the seek is effectively returning all rows just like a scan and the filter returns only rows matching
the LIKE expression.
Do you want to say that in case of leading wildcard, expressions Expr1007 and Expr1008 (see image below) calculated such a way that
Seek Predicates retrieve all rows from the index. And only
Predicate does the real job by taking only rows matching the Like expression? If this is the case, then it explains how
Index Seek can be used to resolve such queries: LIKE N'%94'.
However, it leads me to another question: Since
Index Seek in
this particular case scans
all the rows, what is the difference between
Index Seek and Index Scan?
According to
MSDN:
The Index Seek operator uses the seeking ability of indexes to retrieve rows from a nonclustered index.
The storage engine uses the index to process
only those rows that satisfy the SEEK:() predicate. It optionally may include a WHERE:() predicate, which the storage engine will evaluate against all rows that satisfy the SEEK:() predicate (it does not use the indexes to do this).
The Index Scan operator retrieves
all rows from the nonclustered index specified in the Argument column. If an optional WHERE:() predicate appears in the Argument column, only those rows that satisfy the predicate are returned.
It seems like Index Scan is a special case of Index Seek,
which means that when we see Index Seek in the execution plan, it does NOT mean that storage engine does NOT scan all rows. Right?
Alexey

Creating an index: it's not possible to select a tablespace for the index

Hi,
we are using SQL-Developer Version 3.0.04.
When creating an index it's not possible to select a tablespace for the index. The only choice which is offered by SQL-Developer is <DEFAULT>.
The user itself has privileges on several other tablespaces - and therefore not just only on the default tablespace of the user.
Any help will be appreciated
Rgds
JH

Hi JH,
Well, the capability is somewhat buried in the UI, but it is there.
In the Create Index dialog ...
1. Tick the "Advanced" check-box in the upper right-hand corner.
2. Select "Properties" from the left-hand list (Definition, Properties, Partitions, DDL).
3. Click the Storage Options... button
4. Use the drop-down list to select the desired tablespace.
Return to (2.) and select DDL to see that your tablespace choice is present.
Regards,
Gary
SQL Developer Team
Edited by: Gary Graham on Mar 7, 2012 5:06 PM
And if all you see in the drop-down list is <DEFAULT>, then I would suggest rechecking the user's privileges. Or provide more details about your environment: OS / Database / JDK version, and so on.

Hi, I have an ipad 2. Issue is. My p.c got stolen and i got a new one. Now is it possible for me to sync my music to itunes on my new laptop from my ipad?

I have an ipad 2. Issue is. My p.c got stolen and i got a new one. Now is it possible for me to sync my music to itunes on my new laptop from my ipad?

Check out this user tip from TuringTest:
https://discussions.apple.com/docs/DOC-3991
and this page on "How-to Geek":
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Regards.

Auto sync for all accounts?

Under Settings > Mail > Auto Sync, I have selected Every 15 minutes. I assumed that this would sync ALL of my accounts and ALL of their subfolders, every 15 minutes. It seems that it only syncs the last active folder in the last active email account. This is not at all what I was expecting. Since Auto sync is a general mail setting, it would be very misleading to have it only act on the last active account and folder.
Is this how it was intended to work? Is there something wrong with how I set this thing up?
Any help here would be appreciated.
Thanks in advance.

Hallo Michael,
What you describe is actually exactly how Skype Manager works:
You start with purchasing Skype credits on the Skype Manager group account and set up the manager account to auto-top up on low balance.
You can then enable members of the Skype Manager group to receive credits from this manager credits pool and have them set up individually for auto-top up from that source as well
See also this FAQ article: https://support.skype.com/en/faq/FA633/what-is-auto-recharge-in-skype-manager-and-how-does-it-work
Hope this helps.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Cisco Prime 2.1.2 auto sync config for switches and Routers

hello Support,
how to configure auto sync config in CPI? when the customer make a changes in the switches and Routers, the customer expect a new version of the configuration in CPI immediately. but we are getting the new version after 10 minutes. if we not configure in the switches and Routers to send syslog we are not getting anything.
where we have to configure in CPI to get the new versions immediately?
thanks!

Make sure you have completed the recommended preparation steps given in Before You Begin Installing the Patch.
If you are not using the Prime Infrastructure High Availability (HA) feature, follow the steps in Installing the Patch instead of the steps below.
If your current Prime Infrastructure implementation has High Availability enabled, follow the steps below to install the patch. You must start the patch installation with the primary server in “Primary Active” state and the secondary server in “Secondary Syncing” state.
Patching of the primary and secondary servers takes approximately one hour. During that period, both servers will be down. If you have trouble at any point, see Troubleshooting Patch Installs in HA Implementations.
Step 1 Ensure that your HA implementation is enabled and ready for update:
a. Log in to the primary server using an ID with Administrator privileges.
b. Select Administration > System Settings > High Availability , The primary server state displayed on the HA Status page should be “Primary Active”.
c. Select HA Configuration . The current Configuration Mode should show “HA Enabled”.
d. The Failover Type must be set to “Manual” throughout the patch installation. If Failover Type is currently set to “Automatic”, select “Manual” and then click Save .
e. Access the secondary server’s Health Monitor (HM) web page by pointing your browser to the following URL:
https:// <ServerIP> :8082
where ServerIP is the IP address or host name of the secondary server.
f. You will be prompted for the authentication key entered when HA was enabled. Enter it and click Login .
g. Verify that the secondary server state displayed on the HM web page is “Secondary Syncing”.
Step 2 Download the patch:
a. Point your browser to the software patches listing for Cisco Prime Infrastructure 2.1.
b. Click the Download button for the Release 2.1.2 patch file (pi212_20141118_01.ubf), and save the file locally.
Step 3 Install the patch on the secondary server:
a. Access the secondary server’s HM web page by pointing your browser to the following URL:
https:// <ServerIP> :8082
where ServerIP is the IP address or host name of the secondary server.
b. You will be prompted for the authentication key entered when HA was enabled. Enter it and click Login .
c. Choose the HM web page’s Software Update link. You will be prompted for the authentication key a second time. Enter it and click Login again.
d. Click Upload Update File and browse to the location where you saved the patch file.
e. Click OK to upload the patch file.
f. When the upload is complete: On the Software Upload page, verify that the Name, Published Date and Description of the patch file are correct.
g. Select the patch file and click Install . When the installation is complete, you will see a popup message confirming this.
h. After the installation is complete on the secondary server, verify that the Software Updates page shows:
– In the “Installed” column: A “Yes” opposite the listing for this patch.
– In the “Pending Restart” column: A “Yes” for the secondary server. Do not restart the secondary server at this point.
Step 4 Install the patch on the primary server:
a. Log in to the primary server using an ID with administrator privileges and choose Administration > Software Update .
b. Click Upload Update File and browse to the location where you saved the patch file.
c. Click OK to upload the patch file.
d. When the upload is complete: On the Software Upload page, verify that the Name, Published Date and Description of the patch file are correct.
e. Select the patch file and click Install . When the installation is complete, you will see a popup message confirming this.
f. After the installation is complete on the primary server, verify that the Software Update page shows:
– In the “Installed” column: A “Yes” opposite the listing for this patch.
– In the “Pending Restart” column: A “Yes” for the primary server. Do not restart the primary server at this point.
Step 5 Stop the servers in the following sequence, using the commands explained in Running Commands:
a. On the secondary server, run the ncs stop command.
b. On the primary server, run the ncs stop command.
Step 6 Re-start and monitor the servers in the following sequence, using the commands explained in Running Commands:
a. On the secondary server, run:
– The ncs start command to restart the secondary server. Wait for the processes on the secondary to restart.
– The ncs status command to verify that the processes on the secondary have re-started.
– The ncs ha status command to verify that the secondary state is “Secondary Lost Primary”.
b. Once the secondary server is in “Secondary Lost Primary” state: On the primary server, run:
– The ncs start command to restart the primary server. Wait for the processes on the primary to restart.
– The ncs status command to verify that the primary’s Health Monitor and other processes have re-started.
Once all the processes on the primary are up and running, automatic HA registration will be triggered. This normally completes after a few minutes.
Step 7 Once registration completes, verify the patch installation as follows:
a. Run the ncs ha status command on both the primary and secondary servers. You should see the primary server state change from “HA Initializing” to “Primary Active”. You should see the secondary server state change from “Secondary Lost Primary” to “Secondary Syncing”.
b. Log in to the primary server and access its Software Update page as you did earlier. The “Installed” column should show “Yes” and the “Pending Restart” column should show “No” for the installed patch.
c. Access the secondary server’s Health Monitor page as you did earlier. The “Installed” column should show “Yes” and the “Pending Restart” column should show “No” for the installed patch.

Question on iOS 5 for iOS developers-managing auto syncs?

A question for any iOS developers out there with access to the iOS 5 Beta release:
My wife and I share a single iTunes account on our 2 iPads, 2 iPhones, & 2 MacBooks. My question is--With all the auto-sync features of iOS 5 (calendars, contacts, bookmarks, photos, apps, etc.), how will we be able to select which features we want synced on each device? Do you know if there are settings to allow her info to be synced to her MacBook, iPad & iPhone, and my info to only be synced with my MacBook, iPhone & iPad? Or will we have to open an iTunes account for her?--which means we wouldn't be able to share apps, etc. Any idea how this might work? -Bob in Austin-

I also think this is more iTunes related than iOS5 or iCloud related. I think there is a iTunes preview freely available since I am pretty sure I downloaded it. I think I have new iTunes related Settings on my iPad under Store. These probably address some of your questions. Since I have not attempted to get iOS5, these settings are not the result of that. I am assuming anything I have is something that is okay for the general consumer to have.
My guess is that all of the things you mentioned will be managed through the iTunes application on your Mac or PC. This may change as the new Store apps are released to the iOS devices. If I am not mistaken, some of the apps have already been updated. Your iTunes account is not going to be OS specific and with the exceptions of your iOS apps, the media you download will not be OS specific. You have specific settings for each iOS device in your computer copies of iTunes, correct? Probably a good plan would be to designated which devices are going to be part of your beta testing and use the machines accordingly.

Auto sync is possible for intermedia indexes?

Similar Messages

Maybe you are looking for