Automatic Email of Billing document output to customer

Dear All,
We have following requirement @ our client. You valuable inputs will be very helpfull.
Currently output (RD00) are taken via printout and later scanned and sent to customer.
Now client wants following requirement , where in once the billing documents are generated, output  should be sent to customer automatically via EMAIL (mentioned in the customer master : contact person).
I kindly request you to help me with steps required to configure this scenario in SAP.
Thank you
Chaithru.

Hi
For the output type RD00, Maintain the medium SIMPLE MAIL
then maintain condition record for output in VV31
Speciefy medium as 7 and in communication method mention email id to whom u want to send
As soon as you save billing document system will send the email to party.
Kapil

Similar Messages

  • Billing document output needs to tigger for multiple emails.

    Hi Experts,
    We have a scenario wherein a single billing document output gets triggered for multiple emails. The requirement is to send the invoice layout copy to multiple emails where we maintain customer mail ids in customer master record.
    When tried ,we found option in customer master record and maintained multiple email ids to send the billing output.The system has considered first email id from customer master record and did not consider next mail ids from CMR. Could you please suggest how can we suffice this requirement .
    Thanks in advance.
    KV.

    Hi,
    Email Address is maintained in Table ADR6 against the address number of table BUT000 for a particaluar BP.
    If the custom code is used, following logic can be used:
    For multiple email address multiple entry will be there in ADR6 for the same address number. To send the correspondence to all email address, select all entries and concatenate them separated with semi-colon ( and pass the same to the email address field.
    This is working in our case where we are using a third party for creating and sending the PDF.
    Regards,
    Pranavjeet.

  • Custom Automatic Release for Billing Documents

    Dear SAP Experts,
    I have a requirement to make an automatic release after billing document has been created under our custom condition. I could not remove POSTING BLOCK option in VOFA since only some conditions could make these billing documents will automatically released.
    Through the following thread (http://forums.sdn.sap.com/thread.jspa?threadID=2018810) says that it is posible to create the billing document and change manually the option to "automatic released" in the header but I still could not find how to do that.
    Could you please advice me, is there any user exit that is possible to put our condition and make auto release of billing document? or at least how to create billing document manually via VF01 and change the option not to block payment?
    Thanks.
    Regards,
    Charlie

    Hi JP,
    As I mention before, only in certain condtion the billing doc will automatically released so it is not always automatically released, that is why I could not turn-off POSTING BLOCK indicator in VOFA.
    I finally found exit (USEREXIT_PRICING_PREPARE_TKOMK) that I could use to change the billing doc indicator for automatically released although it is not satisfied me 100% since this exit has been run twice (before and after save) and one of my auto release is to compare the net value in the header (before save, net value in header is still 0).
    Thanks all.
    Regards, Charlie

  • Automatic clearing of billing document error

    Hi All,
    When user try to cancel/reverse the billing document following error occurred.
    "no accounting document created". but when user try to release to accounting in VF02. it gives following message.
    "Automatic Clearing of Billing document 900000034 and cancel document 1000000070 not possible."
    Message no.VF208
    Diagnosis
    The system cannot clear billing documents and cancellation documents beacuse, for example individual item updating is deactivated.
    System Response.
    The Billing Document can be created.
    Precedure
    The FI Documents are cleared manually.
    Please help me
    Thanks
    Sap Guru

    Dear Friend,
    IMG - SD - Billing - Define Billing Types.
    Go to your BIlling Document Definition (T-Code - VOFA) & remove the Tick mark (Check) In POsting BLock Check box.
    This check box is located in General Control.
    Hope this helps...
    Reward if useful...
    Thanks,
    Jignesh Mehta
    98700 10230

  • Backgorund job for automatic creation of billing document

    Dear All
    Could you advise me on how to set up a bacground job for automatic creation of billing document?
    Thanks and regards,
    Sylwia

    In standard, you cannot generate automatic billing but you can set date and time so that you can generate invoices at the specified time in bulk.  The TCode to achieve this is VF06.
    thanks
    G. Lakshmipathi

  • Bacground job for automatic creation of billing document

    Dear All
    Could you advise me on how to set up a bacground job for automatic creation of billing document?
    Thanks and regards,
    Sylwia
    Edited by: S. KOWALSKA on Jan 12, 2009 10:12 AM

    Dear Sylwia
    Please dont post the same question in multiple threads.  You are receiving feedback in the other forum.  Check this link
    [Backgorund job for automatic creation of billing document   |Backgorund job for automatic creation of billing document;
    thanks
    G. Lakshmipathi

  • Automatic creation of billing document

    Hi all,
    i want to automate creation of billing document for all the deliveries for which PGI done.
    i think we have to define a job which will call VF04.
    my question is when we do VF04 manually, we have to give selection criteria like sales org etc and then it displays the list of all the deliveries and then we have to select the deliveries manually and press collective billing/individual billing.
    so when the batch job calls the VF04, how will the batch job tells VF04 to select all deliveries and generate the invoices.
    regards
    sachin

    Hi Sonu,
    Go to VF04 and provide the inputs in the selection screen. Now save this as a variant.say ZZ_INV_DUELIST
    After saving the variant, find the program name of the tcode VF04. This can be found by going to System----Status in the menu. The resultant screen will have the program of the tcode VF04. Lets say it is BILLDUELIST
    Now go to SM36. Give some name for hte job name and click Step button
    Here you have to give the program name(BILLDUELIST) and the variant name(ZZ_INV_DUELIST). Here you can also configure whether the job should run immediately or in some schedules.
    Once this is done, you can create a delivery and then run this program in SM37. Now you can see the log of this program. It will tell you that the invoice is created
    Hope this helps

  • Automatic creation of billing documents

    Hi all,
    i want to automate creation of billing document for all the deliveries for which PGI done.
    i think we have to define a job which will call VF04.
    my question is when we do VF04 manually, we have to give selection criteria like sales org etc and then it displays the list of all the deliveries and then we have to select the deliveries and press collective billing/individual billing.
    so when the batch job calls the VF04, how all the deliveries are selected and the selection criteria taken into account by the batch job,
    regards
    sachin

    hi,
    thanks for the reply.
    my mian question was when the batch job calls the VF04 and the slection criteria is filled using variants, then the list of deliveries is called up by VF04. my question is how will the batch job select all the deliveries for invoice creation beause whn we run the VF04 witout bathc jb ,we need to select the deliveries for billing (either collective or individual)
    reards
    sachin

  • SD billing documents send to Customer though EMAIL.

    Dear All,
    We want to send SD Billing documents to Customers through EMAIL. For that we have created new output type ZMAL and done the determination procedure for output type. Also we have maintained Customer Codes with Sales Org. in VV31. But when we raise the Invoice, output type should be come automatically (ZMAL) but it's won't come.
    Please guide us what Config/Setting is missing or provide us all steps to be follow, so we can check and make correction.
    Please help.
    Thanks
    Prashant

    Hi,
    In Configuration of Output type maintain in the Default values tab
    Dispatch time 4
    Transmission Medium 5
    Partner Function CP
    Communication strategy CS01
    Another option might be to maintain Contact Person(s) for the Customer and enable the form for that Partner.
    Maintain customer as the contact person and email address in General data of customer master.Also trigger the partner during the Billing.
    Also ensure that the output type will be triggered automatically once it is released to accounting.There is a routine in O/P determination procedure.
    Regards,

  • SD Billing Document Output to email via external send

    Hi all,
    I hope you can helpt with following issue as I need to send invoices via email using the option 'external send' in the message determination. The settings are as follows:
    Message Determination VV32/VV33
    Output Type ZI04
    Billing Type ZIV
    Condition Record Sales Org / Billing Type / Payer
    Medium 5 - external send
    Dispatch Time 1, 3 or 4
    Cover Page Text: any text followed by invoice no. &VBRK-VBELN&
    Expectation
    With this setting we expect the billing document number to be included in the subject line of the email sent out.
    This works fine as long as you maintain the message in the billing document -> header -> output manually.
    Problem
    If you create a new invoice and the message is created automatically based on above Message Determination settings and you issue the output using any of these options
    - option 1 and report RSNAST00
    - option 3 using VF31 running in background mode or
    - option 4 issuing immediately,
    the document number is printed into the subject line but instead is printed the tempory document number $000000001. The correct billing document number is printed on the PDF form included in the mail output which confirms that the document number is available from the database at the point of output issue already.
    Any idea how to maintain the settings correctly to get the billing document number on the subject line of the email after creating a new invoice?
    Best regards
    Karsten

    Hi,
    I dont have ABAP skills, but ask your ABAP programmer, (or yourself), to find the point in the invoicing program that get internaly the invoice number.
    And you should try to asign the field from the internal temporary structure XVBRK-VBELN.
    Should be something like:
    Cover Page Text: any text followed by invoice no. &XVBRK--VBELN&
    Please confirm with someone that have technical skills.
    Regards,
    Demétrius
    Edited by: Demetrius Pereira de Miranda on Aug 20, 2008 4:21 PM

  • Billing document text in customer line item.

    Dear SD Champs,
    While posting collections from customers, our users are entering some text in the "Text" field. BSEG-SGTXT.
    Whatever text is entered over can be displayed in customer line items fbl5n.
    Users want the same facility in billing document. i.e., they want to enter some text in either the sales order or billing document. This text should be displayed in the same text field in fbl5n against the billing document.
    Kindly help.

    Hi sagar,
    If I understood you correctly, I think the best way is to set a text at sales order with a control copy to the billing document and this one with a control copy to the accounting document.
    If it is so, you only have to maintain the copy control for the sales documents.
    regards,
    Edgar

  • How to create Automatic Delivery and Billing documents immediate

    Hello,
    I want to create Automatic delivery and billing documnets immediate once I create a sales order.
    E.g I need to see in the Status Bar the delivery and billing document was created.
    Thank you in advance
    Your help is highly appreciated
    Alfaid

    Please search in sales forum.  Many times this was discussed there.
    thanks
    G. Lakshmipathi

  • Vf03 billing documents output types

    Hi friends,
    i want to assign output type in vf03 for perticular 'L2-debit memo'.
    So how can I do this?
    thanks in advance.

    Hello,
    See assigning output types can be done in vf02.
    Goto environment header output.
    Enter the respective output & make entries for printer destination in communication device
    Later in intiall vf02 screen you will be able to see the output, provided you have done the config settings properly
    Hope this helps you
    Thanks & Regards

  • Automate creation of Intercompany billing document

    Hello All,
    We have a requirement to automate the intercompany billing document to be created whenever F2 billing document is created ( without using VF04).
    Any input regarding this will be greatly appreciated.
    Thanks,
    Nagaraju

    After goods issue has taken place, you can process the delivery for billing. You can create the billing documents just like any other billing document on the Billing screen:
    for a single billing document with the menu path Billing document ---Create.
    for several billing documents with the menu path Billing document -
    Billing due list.
    The delivery may have to be processed for billing twice.
    The delivering plant processes the delivery to create an intercompany billing document (billing document type IV) for the selling company. This company code posts invoice entry for this billing document.
    The billing document is automatically billed to the internal payer that is assigned to the sales organization. The intercompany charges that appear in the intercompany billing
    document represent the actual amount that the delivering plant is charging the sales organization.
    If the selling company is selling the goods to a customer, it processes the delivery to create an invoice for this customer. The system can take the prices from the order or determine new prices. It takes the quantity to be invoiced from the delivery.
    The billing due list for the intercompany invoice is generated after the customer invoice has been created.

  • Smartform output to be sent as pdf when billing document is saved(VF01)

    Hello all,
    I`m facing a problem in transaction VF01.The requirement is,when user will save the newly created billing document in VF01 transaction ,the corresponding smartform (attached to respective output type ) should be converted and sent as pdf to ship-to party e-mail address.
    I`ve done the coding so that smartform is converted and sent through transaction VF02/VF03.
    But I`m facing problem in understanding how the program is automatically triggered when billing document is created.In VF02/VF03 it can be understood that on "Issue output To" and selecting respective output type,driver program is triggered and processing starts for mentioned routine in NACE.
    waiting for your valuable inputs...

    I hope process will go like this...
    1) when you use VF01 / VF02 & save, automatically RSNAST00 standard program will be triggered.
              2) This program will fetch the driver program & form from NACE transaction & it will execute the driver program.

Maybe you are looking for