Automatic output of method parameters

Hi,
Sometimes I find myself System.out'ing all parameters of a method. Is there a one-step way to do this? A one-liner that will output all method parameters (using reflection I guess) of the method the code is running in.
for e.g
public Car makeCar(Color carColor, int noOfWheels){
System.out.println(outputAllParametersOfThisMethod();
}Console:
carColor=Blue
noOfWheels=4
Appreciate any help that I can get!

Hi,
You can map these all parameters in Process instruction sheets and operator can view the PI sheet to view the process or qc parameter.
Find below the link
[http://help.sap.com/saphelp_47x200/helpdata/en/05/603bc6462311d182b50000e829fbfe/frameset.htm]
http://help.sap.com/saphelp_47x200/helpdata/en/05/603bc6462311d182b50000e829fbfe/frameset.htm
Sanjay

Similar Messages

Automatic Output generation on order not happening all times

Hi Gurus,
We have maintained printer id and marked the print immediately box in the default settings of user parameters (SU10D). With this settings, the output should be created automatically at the time of saving the order.
In some cases, however, we are not having an automatic output inspite of the user parameters being maintained.
Can any one pl suggest if there is anything else to be verified?
Thanks in advance
KatVas

Hi,
The existing set up is like this:
1) V V13 record for sales doc type /sales org combination is maintained with the print immediately activated. The output device is not assigned here.
2) In user parameters (SU01d), the user has a default printer with print immediately activated.
In such case when the particular user creates the sales doc, the out put gets created at time of doc save, with the printer defaulted in user's parameters.
In some cases the output is not getting generated automatically..which is the problem.
Do we need to check any other settings?
Thanks a lot
Katvas

Automatic output message generation for PO

Hi Forum,
I am getting below message while creating a PO, I want to set Automatic output message - (my output is by e mail). Please help...!!!
No message generated for output of purchasing document
Message no. 06261
Diagnosis
The system was not able to find a message record via the message determination schema. Therefore it was not possible for such a record to be generated for this purchasing document. In consequence, the purchasing document cannot be outputted (printed or transmitted).
Procedure
The message determination process should be checked and, if necessary, corrected.
The message record can be created manually for this document. For this purpose, choose the function "Messages" in the menu "Header" and maintain the necessary data.
Thanks & Regards,
Rohit Guliani

Hi Rohit,
You need to check that your print program is SAPFM06P and form as MEDRUCK.
Any testing should be done with this testing and once thus setting works, you may go back to your own program and form if you like. This helps a lot in identifying the area of error.
Please tell me you support pack level for SAP_APPL. It starts with SAPKH***** (like SAPKH46C08).
After that your help can be done.
- Sanjeev

Service entry sheet Automatic output determination

Hello all
For the Service entry sheet to make the automatic Output determination we have maintain the condition record for the document type ( For the document type NB, Output type NEU )
The same is working in DEV Server, but not working in QAS server( it is not determine the automatic output in SES) , Same configuration setting are present is both server.
Also one more thing is that while creating the service PO & SES we are getting following message in QAS server
Customizing incorrectly maintained
Message no. SE729
Please suggest
Thanks in advance
Regards
Rajesh

Hi
Thanks for reply what should be mainatin in Update Print-Dependent Data , whether we have to tick this
Please tell
regards
Rajesh

Purchase Order Automatic Output x 2

Hi,
Does anybody know if it is possible to define in MN04/MN05 two automatic outputs? With that I mean that we would like to have for normal "NB" order types, both a fax and a printout generated. That is medium "2" and "1" at the same time.
However, when I try to maintain MN05, SAP complains that since the entry for Fax is existing, I can not add an entry for Printout.
Any input?
Thanks

Hi Toni ,
It is possible but with different message type.
Eg : NEU -- u might be using for printout .
Make a copy and ZNEU - use it for fax.
Regards
Ramesh Ch

Automatic output by MB1B

Hi,
When I'm doing MB1B with movement type 351 there is automatic output from printer. I want to cancel the automatic output, how can I do it ?
Thank you.

You can unflag the Print option in the first screen of MB1B or modify your profile (Update paramater NDR) which will not print everytime automatically.
Regards
TGB

Automatic Output Type Determination

Dear All,
I have a situation where I want my system to determine which Output Type to be selected automatically, by which I dont have to select for the particular output type.
Can u suggest me some input pls ?
Rgds,
Indrajit

Hi Indrajit,
For Automatic Output Determination
1. Use Condition Technique
2. Create Condition Records
You need to maintain ouput condition records from below T-Codes
T.Code: VV11 - Sales Documents for Sales orders (Output type = BA00)
T.Code: VV21 - Shiiping Activities for Deliveries (Output type = LD00)
T.Code: VV31 - Billing Dcouments..for Billing   (Output type = RD00)
T.Code: VV71 - Shipment              for Transportation
T.Code: VV61 - Handling Units       for Packaging
T.Code: NACE (Group)
Just maintain them and you will get the output type automatically.
It will help you,
Regards,
MH

Netbeans 6.0 - code completion of method parameters

I just updated to NetBeans 6.0 and I find the code completion of method parameters very annoying and counter productive.
It inserts the parameters as keywords when choosing a method from the list after pressing CTRL+SPACE.
How can I switch this off?
I searched the options and also the forum but didn't find a solution.

I know that pressing space or whatever replaces the selected parameter. For a method with a single parameter is not a big problem but this is a poor workaround if a method has more parameters, like eg
public static String formatDate(Date myDate, String myFormat)
When typing
Str.form<CTRL+SPACE,choose method, ENTER>
it looks like
Str.formatDate(myDate, errorMessage)
Although myDate is selected and I can overwrite it, I have to proceed to the next parameter with CTRL+M instead of simply typing a comma. This is very annoying if a method has more parameters and as this annoyance occurs approx. every 5 lines that accumulates.

Get method parameters at runtime?

Hey guys,
is there a way to get the parameters of a methods parameters at runtime? I have a reference to an object and would like to know which paranmeter does a method have.?
thx

Hello
You can use class CL_OO_CLASS (instance attribute METHOD_PARAMETERS ).
Regards
Uwe

Automatic output assignment for delivery document

HI
Can any bady let me know the pre requisites for automatic output assignment for delivery document with reference of PO(stock transfer order)
As of now i configureded every thing fine, i add manually the output is working fine, and i created condition record also. only the things in this is
i need this output automatically when i save my delivery document
Regards,
Vadivel

Dear Vadivel,
Go to your delivery output procedure control data here you you keep Manual only check box as uncheck for your Replenishment delivery output type.
Also check the Requirement assigned to your Replenishment delivery output type.
I hope this will help you,
Regards,
Murali.

Automatically outputting PO's in SRM

Hello everybody.
How do i get SRM 5.0 to automatically output purchase orders (email, fax etc)the moment they have been saved and have a status of ordered in SRM? At the moment, our company PO raisers are having to go to the Issue Purchase Orders menu option (Transaction BBP_PPF) for each individual orde and using the Output pushbutton to manually process an output.
many Thanx,
David.

Hi David,
Did you try to configure the "condition dependent document output" in SPRO under SRM>Cross appl basic settings>set output actions and format
Cheers,
Akash

Access fo Method parameters to Anonymous Class ?

Can somebody please provide some more information on the statement below? I am also searching for some sample code implementations of it. It would help the cause better.
+"Methods of the object of the anonymous class need access to final local variables and method parameters belonging to the method in which the anonymous class is defined. "+
Thanks in Advance

We're concerned here with "local" classes, i.e. classes defined inside methods (not all anonymous classes are local, and not all local classes are anonymous).
The thing about local classes is that, unlike local variables etc., instances of a local class may survive the method returning. For example a local class might be a listener which gets added to a swing component, it could be a Runnable that get's launched as a thread.
Local classes get to access local variables and parameters of the method in which they are declared but the variables or parameters have to be declared final because, since the class needs to be able to access the value of the local variable even after the method exits, and the variable ceases to exist, what actually happens it that the value of the variable is copied into a special field of the anonymous class, and if the variable could be changed after the class was defined, the two copies would then disagree.

Method parameters

Hello
I'm usimg this code to get the local variables in case of a method entry:
            error = jvmti->GetLocalVariableTable(method, &entryCount, &localVariableEntry);
            if(error == JVMTI_ERROR_NONE) {
                jvmtiLocalVariableEntry* entry = localVariableEntry;
                for(int i = 0; i < entryCount; i++, entry++) {
                    cout << entry->signature << ":" << entry->name << endl;
                    jvmti->Deallocate(reinterpret_cast<unsigned char*>(entry->signature));
                    jvmti->Deallocate(reinterpret_cast<unsigned char*>(entry->name));
                    jvmti->Deallocate(reinterpret_cast<unsigned char*>(entry->generic_signature));
                } // for
                jvmti->Deallocate(reinterpret_cast<unsigned char*>(localVariableEntry));
            } else if(error = JVMTI_ERROR_ABSENT_INFORMATION) {
                cout << "<NO LOCAL VARIABLE INFORMATION AVAILABLE>" << endl;
            } else {
                cout << "<ERROR>" << endl;
            } // if...else if...elseNow I'm wondering how to find the method parameters in all this local variables...
Is there a way to get obly the method parameters?
Thank you very much and with kind regards
Alexander Schell
Edited by: EJP on 3/10/2011 20:24: added {noformat}{noformat} tags: please use them.
Edit: Moved the first code-tag
Edited by: user3948319 on 03.10.2011 08:02

Hello and thanks for the answer...
That was my first assumption...but after running the code I got some puzzling results...here's an example:
callbackMethodEntry: methodName=reverse methodSignature=(Ljava/util/List;)V methodGenerigPtr=(Ljava/util/List<*>;)V classSignature=Ljava/util/Collections; thread=DestroyJavaVM
I:i
I:mid
I:j
Ljava/lang/Object;:tmp
I:i
I:mid
Ljava/util/ListIterator;:fwd
Ljava/util/ListIterator;:rev
Ljava/util/List;:list
I:size
The method entered takes surely one argument - a list...but the list is not the first entry in the array which is created by calling getLocalVariableTable...so I'm a wee bit confused right now...
I also don't understand under which circumstances the JVMTI_ERROR_ABSENT_INFORMATION error is raised...
before I forget: Thanks for the tip with the code tags...I looked for something to mark the code but could not find it...
With kind regards
Alexander Schell

How to get names of method parameters ?

How to get names of method parameters (Not only their type and value) is it only possible during debugging ??
for example void myFunction(int a,int b)
I need the "a" , and the "b" The issiue is about the java.lang.reflect.InvocationHandler ,
and its method invoke(Object proxy,
Method method,
Object[] args)
throws Throwable
I Have the parameter objects themself and their types using method.getParameters() , this is fine ,, but i need the names of the parameters !!!

If the class file was compiled without debug information included then it is impossible to get the original parameter names, as used in the source code.
However, If the class file does include debug information, then the method names are hidden deep within the class file. You'd need to parse the class file yourself. Check out a copy of the Java VM Specification for a detailed format of the java class file format.
It's not a trivial task to parse the java class file, and the VM spec isn't easy reading. You'd nearly be writing a class file disassembler.

Can WLW display the real names of method parameters, not arg0, arg1...

Hello
I am new to Java development and as I used to work with MS.NET usually rely on parameter names, so that I don't have to read documentations each time I use a method. However I noticed that WLW replaces the names of method parameters with arg0, arg1, arg2 etc. Is there a way to somehow make WLW display the real argument names and not those argX strings?
Thanks in advance.
Best regards,
Vasil Svetoslavov

In wlw select...
Tools
+-- IDE Properties
--Editor
Ensure that the following are Checked
Use Method Completion
Use Parameter Completion

Automatic output of method parameters

Similar Messages

Maybe you are looking for