Automatic reservation for Internal in VMS

Hi,
I have a requirement to enhance in VMS for " automatically assign an internal reservation to a vehicle object once a sales order has been cancelled".
Please suggest me the possibilities for enhance the request.
Thanks

Hi Hemanth,
You must be performing an action for cancelling the sales order. You can write a code for that action with the help of ABAPer to do that.
If you are doing standard credit process where you create credit memo then you can use interlinking action for RECM and code for that. else you can also use BADI's available in SPRO VMS setting.

Similar Messages

Create Automatic Reservation for Goods receipt of FG

When an order is created, the components from the store are reserved automatically. It implies automatic reservation for good issue.
What about AUTOMATIC reservation for goods receipt of finished product? Is it possible to make automatic reservation in PP for goods receipt of finished product, when finished product is ready?
I know that manual reservation for goods receipt of finished product can be done by using MB21 (521).
Thanks in advance.

Your requirement is a little bit confusing...
If you have production order, why do you need GR-reservation for the to-be produced material? The production order itself is a GR-MRP element nad you can post the GR agains it.
If you don't have production order, I understand you need something to plan the GR.
But it seems you want to have both the PrdOrd and the GR-reservation --> you will have the same thing twice in your system.

Automatic reservation for goods receipt

Hi,
Is it possible to make automatic reservation for goods receipt so that the store collects the material from PM? If yes, please explain.
Thanks in advance...

Greetings to all
Just to add further, whenever you mention -ve qty in order & do goods movement in MIGO, you do reversal of goods issue only(262 movt) & its basically used for returning unconsumed items to the store. As far as cost is concerned its deducted from the actual cost of maintenance(expenses only) & i think cant be treated as revenue. If we recall our basics of cost flow during goods movement, it heats the G/L A/C ( stock A/c & consumption A/C) as well as the cost element for capturing total cost. So this -ve cost will be adjusted in the total cost (expenses) only. Pl correct me if I am wrong
Regards
Shakti

IP Reserved for Internal Usage?

Perhaps I'm missing something obvious, but what does the following LAN setting in a Router do/refer to?
"IP Reserved for Internal Usage:"
Thanks,
Malcolm

Perhaps I'm missing something obvious, but what does the following LAN setting in a Router do/refer to?
"IP Reserved for Internal Usage:"
Thanks,
Malcolm
Hi Malcolm,
Networking address space for the IP protocol is broken into classes — A, B, and C. (There is also Class D for multicasting and Class E for a small set of very reserved,“don't ever touch these” addresses.) In each of the Class A and Class C spaces, there are address ranges reserved for internal, non-Internet use (or a non-Internet routing space for IP traffic). There are two ranges in the Class A space: the 10.0.0.0 to 10.255.255.255 range (also represented as 10.x.x.x) and the 172.0.0.0 to 172.255.255.255 range (172.x.x.x) You may be using one of these spaces in your networks for internal addresses assigned to various hosts (network devices).
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

NOTICE: Keys beginning with // are reserved for internal use

If you're currently developing an application using NoSQL DB, or designing your schema for a NoSQL DB application, please take notice.
In an upcoming release of NoSQL DB, there will be a new restriction on keys: no key may have an empty (zero length string) first component. An IllegalArgumentException will be thrown when attempting to use a key with a KVStore method, if the first component of the major path is empty.
Using the standard Key.toString format, this means that any key beginning with // will be prohibited and the empty key / will also be rejected. For example, the following keys will be prohibited:
//a
//-/a
//a/-/bThe reason for this restriction is to allow the NoSQL DB implementation to store internal information or metadata using key-value pairs. These internal key-value pairs will begin with an empty component and will not be accessible via the API. For example, these internal keys will not be returned by the KVStore.storeIterator method. This capability will be used internally in an upcoming release.
If your application currently uses keys with an empty first component, please reply to this post and we will suggest alternative approaches.
Thanks,
--mark

Greg,
Oracle does not follow the road for abstraction using views for it's E-Business suite.
In general it's better to use the tables. It's faster and in case a table changes or becomes obsolete a view is provided anyway (i.e. RA_CUSTOMERS used to be a table prior to 11i, now it's a view).
There are some exceptions (of course ;-):
1. Multi-Org tables (_ALL suffix).
If possible you should use the views if you run your reports from Oracle Applications. If you want to extract data for your datamart then the using the tables would be
your preferred option.
2. Multi-language tables (_TL suffix)
For tables that have a "_TL" peer table the view with the _VL suffix should be used.
If you are using Discoverer with 11i it may be good to have a look at the BIS end-user-layer that Oracle provides with 11i. This will give you the data abstraction you were seeking.
Regards,
Diederik

Problem for automatic reservation created for PM01 order in PM

Hi,
I have a problem. Generally from Maintenance Order type PM01 under Order Category 30, when we give some materials requirement, SAP automatically generate reservation for those materials and take the GL as Consumable Item (Actually it is determined from OBYC transaction with a combination of GBB (A/c Key) and VBR (A/c Modifier).
But in my case, that GL has to be changed depending on what perpose we are using the material. But Manual reservation is not allowed for the order category 30 and no GL can be changed for automatic reservation.
Can you suggest any way-out so that we can give our desired GL No. for the reservation for Maintenance order (say Order type PM01 under category 30 which is SAP internal).
Thanks in advance,
Satadal

Hi Friend!
Try exploring the sam while post the mat. document thro' MIGO using FI validations..OB28..
Let leave the PM reservation.
RAO

How to reserve material for Internal order

Hi,
How to reserve material for Internal order?
Please reply ASAP.
Thanks & Regards,
Pankaj

Hi Eli,
Thanks for the reply.
I was asking for the integraing of automatic creation of reservation of material.
please revert back if i need to give more details.
Regards,
Pankaj

Automatic creation of Reservation for Service Order (Return and Repair)

Hi, Looking for your valuable help on Creation of Automatic Reservation
I am working on Return and Repair process at Plant.
1) So far
Service Notification > Repair Order > Return Delivery > Service order . has been done.
now requirement is when i am saving the service order for the Object (Fisnished Goods), in which components required for servicing of material are maintained, when i will save the order a Reservation for the same needs to be reaised to Warehouse automatically.
2) In Repair order all operation and components are not reflecting when i am selecting the line item and going to EDIT > Display Range > All Items in VA02 for which i need to do DP90.(Resource Related Billing)
Please hepl,
Thanks
SUDIP SINHA

Thanks for giving valuable answer,
what if in the service order i am replacing some spare parts along with services when FERT is not under warranty. How the cost will be transfered to invoice. In my case only one service is transfered.
i waqnted to transfer cost of components as well..
Thanks
SUDIP SInha

Manual Reservation for Production orders with automatic reservations

Hello SAP Experts, i have a question regarding Order Reservations, in my company when we create a Production order the reservations for each component are created automatically and assinged to a reservation number, the thing is when i try to create a Reservation through MB21 for the same Production order the system says that" for that type of production order i cant generate manual reservations", can you please guide and tell me if i can change this in the configuration ?? , if you need additional info please tell me , thank you in advance.

Dear German,
Your system working according to std SAP setting, u don't need to change any config setting. Because wehn u release order, it automaticaly genarates reservation for each and evry component of the order.
when u do goods issue to order or to reservation either way it gets issue to the order.
suppose if u need to issue any extra component to the order u can just add in order componet overview before u release the order. so reservation gets genarated for this componets too along with BOM components.
In case afer release, if u need further components go to MB1A give mov type 261 and S.Loc and then click on new item push button, it pop ups one more window give all required parameters and post the goods. These goods issue will also gets updated in the order.
But for the order uc an not manually create the reservations
sree

'The Business Add-In is reserved for SAP internal use' message

Hi all
The Business Add-In is reserved for SAP internal use...
I got this message when I tried to create a new implementation to BADI EQUI_SCR_01. I'm trying to add new tab to Iq01/02/...
Does this message mean that this BADI is not modifiable? 'Coz this is the only BADI appropriate for my requirements.
please help me on this
Regards
Rajan

HI Rajan,
You cannot use this badi as it is used by SAP for internal use...Check for other badis which is not internal use.
Regards,
Nagaraj

Manual Reservation for Maintenance Order

Hi,
Can anyone suggest some procedure so that I can stop automatic reservation creation from Maintenance Order (Transaction:IW31, type PM01, Category 30) and create manual reservation for the same.
Presently Manual reservation is not allowed for Maintenance Order.
Thanks
Satadal

To the best of my knowledge this is possible. To the best of my knowledge G/L account determination for every material happens after a series of checks are done internally by SAP. By checks I mean the sequence of steps as customized by the consultant in the configuration. Now at the end of the sequence if SAP has not succeeded in identifying a G/L account it will open up a tab in which u can manually enter the G/L account. For non-stock item you can anyway enter it.
I would suggest that you post this query in the MM forum also.
thanks
Bala

Automatic Reservation from Maintenance Order

Hi,
I have a problem. Generally from Maintenance Order type PM01 under Order Category 30, when we give some materials requirement, SAP automatically generate reservation for those materials and take the GL as Consumable Item.
But in my case, that GL has to be changed depending on what perpose we are using the material. But Manual reservation is not allowed for the order category 30 and no GL can be changed for automatic reservation.
Can anybody suggest any way-out so that we can give our desired GL No. for the reservation for Maintenance order (say Order type PM01 under category 30 which is SAP internal).
Thanks in advance,
Satadal

Thanks for your answer. Actually I found that place, it is determined from OBYC transaction with a combination of GBB (A/c Key) and VBR (A/c Modifier).
But for same movement type261, I need manual G/L allocation at runtime. i.e. depending upon case to case, the G/Ls will be different. So, different movement type perhaps would not serve the purpose.
Basically I need to over-write the G/L for automatic reservation created from PM in the PM01 order type with category 30 where manual reservation is not allowed.
Can you suggest any way out so that I can actually over-write the G/L for automatic reservation- through SPRO or some kind of development...
Thanks
Satadal

Query about Manual Reservation for Maintenance Order Category 30

Hi,
I have a problem. Generally from Maintenance Order type PM01 under Order Category 30, when we give some materials requirement, SAP automatically generate reservation for those materials and take the GL as Consumable Item.
But in my case, that GL has to be changed depending on what perpose we are using the material. But Manual reservation is not allowed for the order category 30 and no GL can be changed for automatic reservation.
Can anybody suggest any way-out so that we can give our desired GL No. for the reservation for Maintenance order (say Order type PM01 under category 30 which is SAP internal).
Thanks in advance,
Satadal

To the best of my knowledge this is possible. To the best of my knowledge G/L account determination for every material happens after a series of checks are done internally by SAP. By checks I mean the sequence of steps as customized by the consultant in the configuration. Now at the end of the sequence if SAP has not succeeded in identifying a G/L account it will open up a tab in which u can manually enter the G/L account. For non-stock item you can anyway enter it.
I would suggest that you post this query in the MM forum also.
thanks
Bala

Is anyone set up to use anycast for internal DNS?

Good Afternoon,
I've been considering using Anycast to provide some redundancy for internal DNS lookups. Configuring DNS and subsequent slave zones in Leopard is easy enough and as I understand it, Anycast is just a way of configuring routers so that one IP address can resolve to many different machines.
I see some of the benefits of using Anycast in that we can have the same 2 dns ip addresses in perpetuity and that as long as one node is up, people will be able to get out.
So my question to you guys: Has anyone done this? If so, is there anything I need to look out for before I start? Is there something you wish you'd known before you started down this path.
I'd love to hear your experiences and read any documentation you might have kept. I thought Mr Hoffman's write up on his DNS services was really excellent btw.
Cheers,
dave

Do you have a particularly large infrastructure?
IP Anycast is usually implemented via BGP announcements from your router(s), with each router using the BGP tables to determine the 'best' server to use. If you're doing this for internal DNS then that assumes you're already running IBGP.
Even then, BGP is a pretty dumb protocol - all it does is say 'hey, here's how to get to a.b.c.d IP address'. It has no idea whether the specific server/service you're after is available at that address.
In other words, even if you setup IP Anycast via IBGP you'll still have clients routing to a dead server unless you can somehow update your BGP tables when a server goes down. Not a trivial task for most routers.
It sounds like what you really want is more load balancing than IP Anycast. There are numerous load balancers than can do this. Another option (if your DNS servers are physically close) is to use some kind of failover process so that the second server assumes the role (and IP address) of the first server should it fail (and vice versa). That option is built-in to Mac OS X Server (although it takes a little command-line jiggling to get it working).
Then again, the whole point of defining multiple DNS servers on the client is that the client will automatically fail over to alternate servers if it doesn't get a response from the first - in other words, the clients already have built-in failover for DNS (although the user will notice lookup delays when the primary server is offline).

Create separate reservation for supplement to a CS-order

Hey
We have a system where by the formation of CS orders automatically generated a reservation (Using IWxx). Attributed to several components of the order, will supplement get same reservation number as the original warrant. This is inappropriate because of date management - observation fields and subsequent follow-up. There is a strong desire to create a separate reservation on the order for each additional supplement/order - this will make follow-up - Questions on the order and printing of various documents much more simple and uncluttered.
Is it possible to make different reservations for the same CS-order?
It must be said, there are a lot of cost and specially created thing that is also linked with the order.
Regards Lone

Hi Lone Host,
1. You have posted the Querry in the ERP-Manufacturing,
2. Kindly post in Correct Forumto get quicker response.
reg
dsk

Automatic reservation for Internal in VMS

Similar Messages

Maybe you are looking for