Automatic Update of Dates in the Transaction based on the date rule assigne

Hi Friends,
This might sound very basic but, it is a major issue at the moment in our project
I have a date type Today-20 days
I have created a Date rule Today-20 days
and assigned to the Date type and then to the Date profile and the date profile to the Transaction type
when i create an Opportunity it takes the system date as Todays date and the Today-20 days is also calculated correctly.
Till now everything is fine.
But the next day when i open and see the opportunity the Todays date is still the system date from yesterday and also the Today-20 days is the same what i saw yesterday
Unless i explicitly click and change something in the dates, they dont refresh automatically
I need a mechanism to trigger the automatic update of dates in the Business Transactions
so as to trigger an action if an opportunity is open but not touched for 20 days
Any advise would be appreciated and rewared as points.
Thanks and Regards,
Raj

Hi Raj
As any other determination the date determination takes only place as long as no dates are filled. It is triggered then only after dates are changed.
Nevertheless your szenario sounds a bit strange to me: What is the sense of always having the actual date / actual date -20 days in the date scheme? As this can easily be calculated on request you do not put this into the date scheme; only information that stays over time is put in schemes (and saved along with the opportunity main data in the DB).
So if you want to stay with the concept the only thing you can do is to re-trigger the date determination of the opportunity by e.g. modifying the dates whenever you are changing / saving the opportunty. This can be done in the ORDER_SAVE badi or in an event (search the CRMC_EVENT_CALL table for an appropriate one). In both cases you need to code some lines of ABAP though.
Hope this helps,
Kai

Similar Messages

I want the system automatic update my UDFs when the OnHand was changed.

I added two UDFs in table OITW to count the warehouse OnHand by CASES and Bottles. I want the system automatic update my UDFs when the OnHand was changed. Is there any way I can do it in database level instead in the application (too much places involved).

There is few ways how to do this:
- triger as David said, but I dont recomend it through SAP policy
- in stored procedure transaction notification by adding or updating document update your user field
- create job in SQL server which in specific interval recalculate the changes of onhand and update your user defined field
- create addon which will be over functiuonalities which may change the onhand value
I think that from SAP is possible only Addon, but the easist way is trigger and if you dont need it just in time but for example every 10 seccond, the better is job which cannot fail the standard SBO transaction (triger may and may be unsafe).
Hope it helps
Petr

Check which data records have been updated or created by the business rule.

Dear all,
   Is there any way to check which data records have been updated or created by the business rule?
   For ex:
   When I run a data package which execute some standard store procedure and the log shows :
Executing SPRUNCONVERSION 'LEGALAPP', [ACTUAL], [GGGG],'GLOBAL','SPSCOPE_42412','SPLOG_125272'
SPRunConversion Version 2.06
20071200 - 210 Rows Calulated
20071200 - 84 Rows Updated
Anyway to see the data content of "84 Rows Updated "?
Best Regards,
Jeff

Yes each aplication has 3 fact tables:
FACTWB:Real time storage, when you send data it is stored here and this is linked to the FACTWB partition in OLAP which is a ROLAP partition to enable real time updates of the data.
FAC2: Short term storage. If too many records are in the FACTWB the aplication becomes slow because these records need to be queried by the OLAP engine everytime new records are send to the database. To clean up te real time storage you can do a lite optimize, which will move the FACTWB records to the FAC2 partition. this lite optimize can be done even when users are in the system.
FACT: this is the long term storage. When your reporting is finished you can run a full optimize to clean up both FACTWB and FAC2 tables and store it in the FACT table. This contains all your historical records.
Evertime you run a reort, SAP BPC is looking at all 3 partitions and combines the data of the 3 partitions to present the correct value in your report. Remember that BPC is posting differences in the WB and not the final values. So if you have for example a record with 10 in the FAC2 partition and you send 12 to the database for that intersection, BPC will post only 2. When running a report it combines the 10 and the 2 which makes 12.
Hope this makes it more clear.
Joost
Edited by: Joost Hoppenbrouwers on May 6, 2008 12:19 PM : Seems that James and I where writing pretty much the same post at the same time

In Pages how do you automatically update a date in a document each time you open the document?

That's all I need to know, and also if it isn't possible, I'd like to know that.
Thanks,

After one enters the Date/Time in Pages '09, the Edit Date & Time item on the contextual menu provides a checkable Automatically update on open. Every version of Pages v5 lacks this capability, and the auto-update setting will be ignored in a Pages '09 document opened in Pages v5.

How to automatic update necessary infotypes at the end in ISR framework

Hi experts,
I want to create a custom PCR scenario based on ISR framework. This scenario will transfer a person from one position to another position. In the normal PCR scenario, the final change of the person's infotype data is done by following-up functions which are defined in the scenario action boxes. These following-up functions require an administrator to login system then mannually choose one following-up function to make the update to the system data. I wonder if it is possible to let the system automatically update the backend system at the end of the execution of ISR scenario. The ISR scenario has a setting called 'Automatic Update', will this help? Or we need to add a step in the PCR workflow to do it? Thanks a lot.

Automating those kind of updates is part of the new HCM Processes and Forms which is in fact a replacment for PCRs. I would look into that if you can.

After trying to run the iTunes automatic update, I got this "The feature you are trying to use is on a network resource that is unavailable." Click OK to try again,or enter an alternate path to a folder containing the installation package 'itunes.msi"

After trying to run the iTunes automatic update, I got this box on my pc "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi" in the box below.. I ran a search for the file, and entered that into the box, to no avail. Then I launched iTunes and clicked on 'check for updates', and was told I had the latest version 11.0.1 I think it is. So, any clue on what to do? Thanks for any and all help.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

After automatic update to firefox 23, the wlecome to firefox/ Android page always opens

The automatic updater did the update to Firefox 23 several days ago. Since then, when I open Firefox the add-on compatibility check runs before Firefox opens, and Firefox always opens to the Welcome to Firefox page that wants me to connect my PC with an Android phone. Considering that I don't have an Android phone, it is annoying to have to close that tab before I do anything else.
Previous updates took me to the welcome page only the first time I opened Firefox after the update. At least this time Firefox didn't try to change my home page from the one I choose to the Google search page. I can search from the toolbar if I want to; I don't need Firefox to open to the Google search page.

Thanks, that took care of this problem. Now I can go back to last week's sync problem and try those solutions.
I did have to reset my home page to the one of my choice, but that didn't take very long. I might find a few other things I need to set again, but sometimes it's nice to clean the slate so to speak and start fresh.

Why the PO action history is not updating when i perform the vacation rules

Hi,
Can any one explain why the action history is not updating when performed the vacation rules using the below example
Example: A >B>C>D are in the approval hierarchy here I have defined the vacation rules by login to the user C here I selected the item type as “All” and delegated to D.
Now the buyer “A” has sent the document for approval. The user “B” can successfully reserve funds and approved the document. Now the document is automatically delegated to D. Here D can open the document from open notifications and approved the document. Now when I checked the Action history here I cannot find the performed name D who has actually approved the document.
Note:we are using the 11.5.10.2 version.
The Action History in the following manner
Seq Action Performed By
================================
4 Approve C
3 Forward B
2 Reserved B
1 Forward A
0 Submit A
From the above action history why the user D name is not showing. Can any one let me know ASAP?
Regards,
Keivn.
Edited by: user10960960 on May 5, 2009 3:36 AM

When you set up the vacation rule, if you simply delegate the ownership to D, then C retains the ownership and the approval occurs with C's limits. And hence D is treated as the approver.
If you transfer the ownership, then C is out of the picture. The notification goes to D and when he/she approves, D's limits kick in and he will be seen as approver.
Hope this helps,
Sandeep Gandhi

AD rename is considered as update, will not apply the provisioing rule

Hi all,
I'm trying to rename my existing accounts in AD to arrange them in different OU depending on departments.
I configured my environment to have both data flow for dn as persestant flow and initial only for dn value,
for new users created in the forum, the provisioing occur in the right way with the correct ou location, but for existing accounts it considers the dn change as an update and the system tries to flow the value to the dn attribute in the
AD account, when reimporting the error msg appears as "exported-chagnge-not-imported"
any ideas will greatly help!
thanks

I have just done a sanity check in my lab environment.
All, I can tell you is, that it should work as explained.
Your best bet is probably to create a repro of my scenario and to compare it with what you have.
Here is the synchronization rule I've been using:
As you can see, I'm using the description attribute to make a move decision.
If description is "Test", I'm moving the object to a different OU.
Moving the object to a different OU is correctly indicated as Rename:
This is also what the synchronization statistics reports:
I hope this helps...
Cheers,
Markus
Markus Vilcinskas, Knowledge Engineer, Microsoft Corporation

Automatically Update a UDF in the Item Master

Hi Experts,
I am new to SAP Business One. I need to update automatically the value of a UDF. The value will be calculated using data from related tables. Calculation includes -summation, divide and minus etc. Could you provide guide.
For example a new UDF should contain the suggested quantity to order in the Item Master Data. This is calculated considering the running average sales quantity as of current time for this month and deduct the available quantity on hand and also deduct the quantity already ordered (arriving soon to be delivered to warehouse).
Formula:      = ( S / N ) * D - ( OnHand ) - ( Ordered )
where   S = Quantity sold so far within this month
              N = days count ( if today is March 18, N = 18 )
              D = number of days for this month. (can be 28, 30 or 31 days)
This means that the data in the database must also be updated. I appreciate your input.
If possible, the OITW, MinOrder will be updated instead of a UDF.

Haven't tested it properly, but something like this....
select
(s0.qty / datepart(day,getdate())) * datepart(day,(DateAdd(day, -1, DateAdd(month, DateDiff(month, 0, getdate())+1, 0)))) - t0.onhand - t0.onorder
from
oitm t0
left join
(select     t0.itemcode,
          sum(t0.quantity) as qty
          from inv1 t0
          inner join
          oinv t1
          on t0.docentry = t1.docentry
          where datepart(month,t1.docdate) = datepart(month,getdate())
          and datepart(year,t1.docdate) = datepart(year,getdate())
          group by t0.itemcode) s0
on t0.itemcode = s0.itemcode
where t0.itemcode = $[OITM.ITEMCODE]
Currently this adds up the qty from all invoices, if you want to subtract credit notes you just have to build in a second subselect from ORIN and RIN1 and subtract them off.
Hope this helps.

How to automatically update xml data for xml connector

I suspect the answer to this is simple because I am a real novice when it comes to ActionScript.
I have a project with an XML Connector that goes out and gets data from an xml file and displays it in a label in my flash.
It does this when the swf file loads using ActionScript in frame 1.
The ActionScript is simply:
this.labels_xc.trigger();
This is great. It loads the data from the XML file no problem. But the data in the XML file changes every so often. How do I get the swf file to go out and get the new data on a regular interval (say every 2 minutes or so)? I've looked at scripts with timers and I can't figure it out.
Here is the url to the page I'm testing it on:
http://www.timescapemedia.com/uptake/text.html

My lack of experience here is showing.
I tried putting the following, but neither work.
this.labels_xc.trigger();
setInterval(f, 30000);
function f() {
this.labels_xc.trigger();
and
this.labels_xc.trigger();
setInterval(f, 30000);
function f( ) {
this.labels_xc.trigger();
Obviously I'm not putting this together correctly.
I appreciate your patience and help.

I CANNOT FIND MY BOOKMARKS. FIREFOX AUTOMATICALLY UPDATED AND CANNOT FIND THE RIGHT ANSWER TO RETRIEVE THEM. HOW IS CREATING A NEW PROFILE GOING TO RESTORE THEM

I open profile manager and see bookmarks but how can it restore them in my browser? Firefox doesnt clearly explain but just moves you to different articles with no end.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

Query to update and or correct the payment method assigned to each employee

Its a humble request out there if some one can provide me with an updating API that can help me change the payment method attached to various employee from the back end as it will be a tedious job to do it mannually for 900 employees.
Appriciate all ur help!
regards

Use the APIs HR_PERSONAL_PAY_METHOD_API.update_personal_pay_method to update Personal Payment Methods of Employees

Automatic updating of ipod software - saying I'm not connected to the Net

Hi There, Please help me. I bought a game for the ipod and it wouldn't play, I needed to update the itunes, which I did. Then the ipod software needed to be updated and I opted for automatic updates. when I connect the ipod to the computer it says there is an up to date version of ipod software available and do I want to update when I click ok it says that it cannot update as I am not connected to the internet but I am !! My broadband shows as connected and I'm online ???? Please help! Yours very confused ...

Try this.
http://docs.info.apple.com/article.html?artnum=304468

My apple tv just automatically updated now I get a screen with the back of the unit, what do I next

My apple TV automatically updated and now that the update is done, I get a screen with the back of the Apple TV showing a plug coming out of the HDMI spot pointing toward a music sign. How do I get the menu screen back?

The update didn't apply correctly. You need to grab a micro usb cable and connect to iTunes for restore
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

Automatic Update of Dates in the Transaction based on the date rule assigne

Similar Messages

Maybe you are looking for