Automatically calculate depreciation after add new asset in CAPEX

Hi,
My client wants the system automatically calculate depreciation after add new asset in CAPEX, not click one-by-one asset and calculate depreciation. Please help.

Hi,
Can you please help me the algorithms for the code? My IT department can't write that without a algorithms and I don't know much about essbase coding algorithms :) . Thank you so much.

Similar Messages

Re-run depreciation for the month after creating new asset

Hi Experts,
I have run depreciation for 01.2009. I then created an asset with start life and acquisition posting date as 01.01.2009.
In the asset's planned depreciation, the first planned depreciation period is 02. But the requirement is to re-run depreciation for the month and include the new asset in the run.
Is this possible? How?
Thanks!

When you have run the depreciation for period 01 and you create a new asset where the depreciation starts in period 01 you see that the planned depreciation (period 01 and 02) will be posted in period 02
It is possible to do the repeat run and then it will be posted in period 01, you will see this then back in period 01 as posted depreciation.
You can run this as test run and for only 1 asset!

Calculate Depreciation Forecast for Fixed asset

Dear all expert,
I'm new to ASO, would like to know if there's a way to do depreciation forcast for fixed asset in Essbase.
1. Database type is ASO
2. Assuming user will prepare forecast caplitialization of fixed asset then upload to Essbase
3. Attribute dimension "Useful life" has been defined and attached to specific "Accounts" dimension for calcluation
4. Need to calculate the forecast and spread of depreciation for future months
E.g. Input 32000 USD for a fixed asset cost with 32 months useful life
-> should calculate 1000 each month for the coming 32 months
Can any expert suggest how to do this in ASO? meaning only can do calculation in member formula itself, not calculation script.
Thanks for your help in advance,
Billy

I haven't used the feature, but the reference to 'local script_file' in the MaxL railroad diagram for the 'execute calculation' command suggests the location is relative to the client, if the semantics are consistent with the 'export data' command (the options for report scripts there are 'server' or 'local', although according to the railroad diagram there is no non-local alternative in this case!).
There is a worked example in a Rittman Mead blog post about this that might help: http://www.rittmanmead.com/2010/04/oracle-epm-11-1-2-essbase-calculations-on-aso-cubes-part-2-maxl-scripts-and-eas/
The DBAG also says that the script files should have suffix .csc, while the Tech Ref example has suffix .txt - helpful!! If they were actually meant to sit in the server's db directory, I would be surprised to find the .csc suffix used, since that is also the suffix for aggregation scripts. Although me being surprised doesn't mean much.

11.1.2 - Workforce and CAPEX issue - Add New Hires and Add New Asset Rules

Hi All,
We are working on Oracle Fusion 11.1.2 and are using the out of box functionality for Workforce and CAPEX.
We are facing a weird issue in case of the above Modules when we try to Add a new Hire or a new Asset in the respective modules using the Add TBH Hourly , Add TBH Salary and Add Asset rules.
The Issue is sometimes the correct number of New Hires or Assets is added as specified in the prompt. For instance, if specify Number of New Hires as 5, then 5 rows of TBH are added on the web form dynamically with other employee properties populated on the form as mentioned in the prompt. However, at times this does not happen, so if I specify 5, 4 rows are added, if I specify 15, 7 rows are added and so on.
The out of box rule looks okay, we are not sure why this should happen?
Has anyone of you faced a similar issue, It would be really helpful if you can share your thoughts.
Thanks a ton in advance.
Madhavi

Have you try to check the related Business Rule? In older version Add TBH menu related to a Business Rule. Never configure this module on 11.1.2 but maybe the add tbh menu related to a Business Rule or Script on Calculation Manger

Add new Assets to FCP?

I am aware of several ways I can do this but cannot find the "FCSvr way" in the documentation. How does FCSvr expect you to add new clips to a .fcp?
Is it ok to browse and drag to the open project or is another method the prefered use? I am trying to establish how to move from ingest to the project when the Edit has already started and new footage has been digitized that needs to go into that FCP project.
Thanks.

Thanks R Longwell I know I can but it that the 'right way' to do it? Dragging the project is a no no so I am just checking dragging clips is ok.
Both methods will update after a save and refresh in fcsvr but if dragging clips from fcsvr to fcp is ok then that is fine.

Help!!! error after add new field use EEWB

Hello,
I add a new field through EEWB. The new field is add on Complaints header called Internal Reference.
I use wizard of EEWB to add new field , business object: CRM business transaction, then in the wizard, I choose complaints as the type of the transaction, and I check the "search" box for the field, because I also need to use it as search criterial.
Then I go into the BSP_WD_CMPWB, the new field is already available for component BT120H_CPL, view Details. And it is also available for the search view.
So far, everything looks fine.
But when I go into the UI for testing, when I perform the complaints search and click one record to go into the complaints view, it gives me a exception on header. I use SAAB to check the details, it like following:
BTExtRefSet.BTEXTREF/MainWindow
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - Define Application Component 'BTExtRefSet'.
Method: CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF
Source Text Row: 9
Is there anything I missing to do so I get such error message???
Edited by: SAP-Basis on Dec 1, 2008 5:12 PM

Hi All,
I have the same error but I am not usig EEWB.
I am trying to display my custom set types as assignment blocks in the Web UI on 'objects' view. I able to see my set type as assignment block, but when I click on it, I have this error:
ZXXX.PRDGENSET/SLSetOVE
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - Define Application Component 'ZXXX'.
Method: CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF
Source Text Row: 9
ZXXX - set type name.
I doubt my enhancement set is not getting loaded.
Could you please let me know how do I solve this error.
Thanks,
Aditya.

Why won't Windows XP automatic updates work after installing new ITunes

After installing the new 11.1 Itunes, Windows automatic updates fail to install any new updates.
The last time this happened was when I last updated Itunes. I can't remember how I fixed it but I had to go into the apple software and fix something.
Please help!

Please help me ! I don't understand why I had to restore to factory settings and then when I tried to re-sync it kept telling me iTunes is not working. Why ??

Not Refresh Value After Add New Record used with RPC Component

This is my code in the class Users.as
package inthanous
import mx.controls.Alert;
import mx.rpc.http.HTTPService;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
public class Users
private var service:HTTPService;
[Bindable]
public var xmllist_user:XMLList;
public function Users(){
service = new HTTPService();
service.method = "POST";
service.useProxy = false
service.resultFormat = "e4x";
public function listUser():void{
service.url = "/user/get_all_user_group_name";
service.addEventListener("result", httpResultListUser);
service.addEventListener("fault", httpFaultListUser);
xmllist_user = new XMLList();
service.send();
private function httpResultListUser(event:ResultEvent):void{
service.removeEventListener("result", httpResultListUser);
service.removeEventListener("fault", httpFaultListUser);
xmllist_user = new XMLList(service.lastResult.children());
listAllUser();
private function httpFaultListUser(event:FaultEvent):void{
var faulstring:String = event.fault.message;
service.removeEventListener("result", httpResultListUser);
service.removeEventListener("fault", httpFaultListUser);
Alert.show(faulstring,"Error");
public function createUser(_xml:XML):void{
service.url = "/user/create_user";
service.addEventListener("result", httpResultCreateUser);
service.addEventListener("fault", httpFaultCreateUser);
service.send({firstName: _xml.firstName,
lastName: _xml.lastName,
gender: _xml.gender,
login: _xml.login,
pwd: _xml.pwd,
dtBirth: _xml.dtBirth,
telephone: _xml.telephone,
idGroup: _xml.idGroup
private function
httpResultCreateUser(event:ResultEvent):void{
service.removeEventListener("result", httpResultCreateUser);
service.removeEventListener("fault", httpFaultCreateUser);
listUser();
clearUserDetail();
private function httpFaultCreateUser(event:FaultEvent):void{
var faulstring:String = event.fault.message;
service.removeEventListener("result", httpResultCreateUser);
service.removeEventListener("fault", httpFaultCreateUser);
Alert.show(faulstring,"Error");
This code i used with Ruby on Rail to connect with MySQL.
When i used with FireFox browse after i create new user
success it refresh the new record in Datagrid. But for the Internet
Explorer Datagrid not refresh it because of it display the old
recode before create.
So i don't know it problem by Internet Explorer or my script.
i hope someone can help me the solve this problem.
thanks

If you restrict the selection, a record value outside of that selection is not acceptable and will give you this error. This is how BPS works.
You need to restrict on some other char so BASIC1 doesn't come in, but this value should be part of any selection on ZSEGMENT field for it to be accepted back.

Add new depreciation to existing assets

hi experts
can we add new depreciation to existing assets , while creating new assets i can see the depreciation that i have created recently. but for the existing assets i want to add this new depreciation.
venkat

Hi
Yes u can change the depreication
but keep in mind note the date when u chnage the depreciation of existing asset
and check any invoice not pending of asset PO at the time of change the depreciation
Suppose u create a PO with asset, whc\ich is creatd ( suppose machinary rate is 10%)
then u comlete the cycle first this means invoce entry ( MIRO)
then u chnage the depreciation
if any query revert back
Regards
Roobal

Add depreciation area to old assets (revaluation area)

Hi guys,
I've created a new depreciation area for setting revaluation of assets. This new dep area only contains revaluation of assets (we'll only have revaluation and depreciation of this revaluation in this new area), so I've configured it to manage only revaluation values. Acquisition values are not allowed.
In OABC i've put "00" in the area where this new area takes values from, due to i don't want thhis new area to copy acquisitions values from area 01.
I've made the rest of the configuration also, to support revaluation transactions (mov 800) in this new area. But, I've got 2 problems now:
1. The new area i configured is missing when creating a new asset in AS01. However, when using AS91 the new area shows up. Any idea of why this happens that way?
2. I cannot add the new area in old assets. When using AFBN a message appears: "Depreciation area 20, which you want to create as a new depreciation area in chart of depreciation PVPE, has no depreciation area defined for value takeover. This may be be correct for normal operation, however for the purposes of creating a new depreciation in the productive system, you have to enter a depreciation area whose values are used as base values for the new area."
Message makes sense, because my new area is not copying values from any area (in tcode OABC i defined 00 as dep area source). The question is.. is there any additional tcode where i can add the new depreciation area to old assets?
Thanks in advance.
Eduardo

Hi,
there are the following steps:
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :
   3.1 - Indicator: Leave values initial = not ticked.
           The system will copy all the past years values from
           depreciation area 01.
3.2 - Indicator: Leave values initial = ticked.
           Set this indicator if you want to open the newly created
           depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
Following notes for information:
430618     Procedure for setting up new depreciation area
857601     Parallel currency area and RAFABNEW
301113     Restrictions of RAFABNEW
A Documentation you can find in SE38 entering the   RAFABNEW and press the button documentation.
regards Bernhard

After 2 years want to change depreciation key for a asset

Hi,
For a particular asset we want to change depreciation key for this asset already we have posted depreciation for 2 years. After 2 years user realizes they are using wrong depreciation key now they want to change depreciation key for a particular asset. In new financial year till now they have not posted depreciation .I just want to now what is the impact of this changes how we will adjust the value in future because previously they are calculating depreciation 1.63% now they want to calculate depreciation 3.33 % can any one tell me about the future impact of asset.
How we will adjust the value?
Thanks and Regards,
Neha

Hi,
Does your user wants to post the depreciation for closed Fiscal years?
If yes First calculate unplanned depreciation for the difference up to the last closed fiscal year and post in the current year.
Now after posting this then change the depreciation key in the asset master and in the next run the system identifies the difference between posted value with the old Key and teh correct key and adjusts the difference in the current period depreciation run.
If the user don't want to post the values of the previous years, change the key in asset master so that the difference in the depreciation from the start of the fiscal year is adjusted in the current period.
Future impact if the option is second the asset life will be more when compared to the actual life. In first case there is no effect.
Provide Business with these two solutions and they have to choose between the options.
Reward points if useful.
Sarma

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

How to 'force in' the Depreciation Area for an Asset after it was created

Hi,
When I created an new asset under a new asset class, I forgot to set-up the depreciation area for that class. Now after I have saved/created the asset, I get this error : No depreciation areas have been defined for asset 1012500000-0. How do I 'force-in' the depreciation area now after it has been setup.

try and read docu to tcode AFBN
(if your problem is in production, consult SAP-OSS)
A.

Howto automatically add new added bc files in CVS

Hello,
is it possible to automatically add new bc4j files in projects to the CVS repository?
If I remove a file from project it is automatically removed from CVS. Why is the same CVS automatic functionality not available for add a new file to project (may be after confirm this with a message)?
Kind regards,
Paul.

Hi Rob,
thank you for your reply.
What's meaned with the next version?
Do you mean with the "pending checkouts" the window "uncommitted files"? In my version 9.0.5.2 only uncommitted but not non-added files are here displayed.
Thanks, Paul.

When I sync my ipod to add new material, sometimes itunes will automatically rearrange the song order of my pre-existing albums by number of plays. Why does it do this? And is there a way to stop it?

When I add an album to itunes and subsequently to my ipod, everything is arranged by track number of the album. Sometimes when I sync in order to add new material to my ipod, itunes for some reason automatically rearranges some of my pre-existing material by songs with the greatest number of plays to least (though sometimes it seems to be completely random). When I check itunes on my computer, everything still appears to be in order but the way it appears on the device often is in the previously mentioned disorder. Why does it do this? Is there any setting that I can adjust to make it stop because the only way I've found so far is to delete the rearranged material and re-import the cd and then re-sync. It might sound picky, but I prefer that my music be in order by track number as the artists themselves intended for various reasons the foremost being that I often listen to whole albums from start to finish and this glitch makes such problematic. I have found some settings in preferences that focus on how material is arranged but this seemed to be focused on the actual folders where the music is located on my hard drive and not the way it appears on the ipod. If anyone knows the reason it does this or has suggestions on fixing it, I would be greatly appreciative. Thanks.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

Automatically calculate depreciation after add new asset in CAPEX

Similar Messages

Maybe you are looking for