Again: Define Number Ranges per Backend System for Follow-on Documents

Obviously I have a problem with this setting! What have I done wrong?
We are running ECS with multiple Backends. We want to assign different number ranges to each backend PO.
Our settings:
- Number Range SC and Follow On Documents: 01 0100000000 - 0199999999 (internal) and
P1 3010000000 - 3019999999 (internal)
- Number Range local PO: P0 3000000000 - 3999999999 (internal)
- Number Ranges per Backend System for Follow-on Documents: XYZCLNT010 PO number range = P1
- Transaction Type ZRM assigned to number range PO
- Backend Document Type ZRM assigned to an external number range P1 3010000000 - 3019999999
I would have expected following system behaviour:
System creates the local PO within number range P0 and creates in backend XYZCLNT010 a PO within number range P1.
But instead SRM tries to post the backend PO with a number from range P0.
What is wrong?
Rgds.
Dieter

Hi. I do not know how to fix your problem as standard, I have never done the same setup, but BADI BBP_BS_GROUP_BE will allow you to choose different number ranges in method GET_NUMBER_OR_RANGE.
Does that help at all?
Regards,
Dave.

Similar Messages

Number ranges per sales org for various SD-documents

Hi everybody,
I captured a requirement from my customer. He wants to be able to recognize the sales organization from the document number. The doc# ranges he wants to have are as follows:
Scheduling Agreement: 1.
Standard Order: 2
Delivery: 3:
Invoice: 4.
Credit memo: 5.
Debit memo: 6.
Return: 8
The 2nd and 3rd digits of the document should then identify the sales organization.
Example 1: Sales Org 0020 creates a scheduling agreement. The document# that comes out should look like: 1200000001
Example 2: Sales Org 0050 creates a return order. Doc# = 8500000001
I found the user-exit RV60AFZ to fulfill my needs for invoices, but I can't find anything for the other types. Any help appreciated!
Thanks & regards,
Bobby
P.S.: I DO NOT want to create/copy all these document types for all available sales organizations, as this means an enormous workload if my customer expands business (e.g. by creating new sales organizations).

Hi
Pls try the user exit USEREXIT_NUMBER_RANGE in the end of the routine BELEG_SICHERN. This will solve your purpose.
NB: To use this user exit, I think you should be using internal number range assignment.
Reward if this helps you
Message was edited by:
Navaneetha Krishnan

User defined Number range for TD Bulk Shipments

Hello,
By defining Customer specific logic with certain conditions through Z table, can we have a user defined Number range for TD Bulk Shipments? As SAP std. either we can have internal number range or external. If external is opted for, then every time User has to specify the same while creating a Shipment in O4F1. There is a every chance that Users will commit mistakes. In order to avoid this can we have something automatic (i.e. System will take care).
e.g. In SD Billing we have one User exit:- USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ). With this and depending upon certain conditions (which are maintained in Z table) we can have our own number range.
Similarly, Can any one please suggest either a User Exit or BAdi or some enhancement point for this requirement?
Regards,
Aniruddha.
Edited by: Aniruddha Saraf on Jan 3, 2008 2:28 PM

Hi Anirudhdha,
There is no standard exit for number ranges like those in SD. However, you can try using the exit EXIT_SAPMOIGS_001 for this purpose. You will still need to enter internal number range in the shipment type configuration.
Hope this helps,
Regards,
Ashutosh

Problem--Define number range for cProjects projects

Hi,
Does anybody knows how to define/create number range for projects in cProjects?.
In the standard cPrjects frontend system, the system is taking 16 digits number automatically so i want to define my own number range as required by the client.
Hence please let me know if some knows abt how to define number ranges for projects in cProjects system.
You can also reach me on [email protected]
Thanking you,
Cheers,
Suresh Nagaraja

Hi Suresh,
don't think there is a standard functionality for this. But you could create your own number range object and fill the data via BAdi. Try DPR_ATTRIBUTES.
Cheers
Thorsten

Define Number Range for Reference Number

Hi all,
I am trying to maintain Different Number ranges for Loans in ESS.
Once i maintain Define Number Range for Reference Number in Loans ESS and trying to raise a new loan from ESS is till see that the ref number is still displayed 0 while raising the New Loan.
No From Number To Number
10
I maintained range for number range number 10.
Pls suggest me on this.
The above scenario works for claims but not for Loans
Regards
Vijay

Solved my self...!

Define Number Range for Manual Planning

Dear All,
How Can I define number range for manual planning?
Thanks & Regards,
Mahendra Gupta
Moderator: Please, search before posting

Hi,
Please follow below path:
SPRO>IMG>Financial Supply Chain Management>Cash & Liquidity Mgmt>Structuring>Manual Planning> Define Number Range (OT20)
Br,Vivek

Limiting POs from backend system for Confirmations

We have activated the ALE model for Confirming Goods Receipt from backend POs. I know that I can use BADI BBP_WF_LIST to filter the POs displayed in the Create/Display Confirmation transaction. However I would like to limit the POs that are sent from the backend system to EBP by document number range. This should prevent cluttering the EBP system with junk POs. Is this possible?
Thanks,
Nancy

Hi
Please go through the links below, which deal with the same issue ->
BADI BBP_WF_LIST implementation
Re: Is it the right BADI
Get PO details from backend
Filtering content in the SRM confirmation worklist
Re: Worklist for confirm goods using BBPCF02
Problem in badi for sourcing worklist 'BBP_WF_LIST'
Re: Confirm Goods / Services Centrally - BBPCF03
Using BADi's BBP_PGRP_FIND and BBP_WF_LIST for Sourcing
Hope this will help.
Do let me know.
Regards
- Atul

Define Number Ranges

Hi Expert,
Can anyone send me snap shot of "defined number ranges?" I searched in available answers , but still having queries.
I have gone thru the path - SPRO - Personnel Management - Basic Settings - Define number ranges - But what does those 3 columns mean? What I have to assign?
If it is something like , 99999 - what is the length of the numbers?
Awaiting your prompt reply...
Regards,
Sejal

Hi,
Have a look on this.
Maintain Number Ranges
In this step, you specify the number ranges for your PD objects and the type of number assignment. You must assign a unique number to every object.
You have the following options:
Internal number assignment
If you want the SAP System to assign the numbers, enter "IN" in the 'NR' field. The number ranges are then indicated by the letters "IN".
External number assignment
If you want the user to assign the numbers, enter "EX" in the 'NR' field. The number ranges are then indicated by the letters "EX".
You can define your own number ranges (subgroups) for individual plan versions (that are not valid for all plan versions) and object types. The names of the subgroups are set up so that the first characters specify the plan version and the last two specify the object type in detail. The structure of the subgroups depends on whether you are using number assignment valid for all plan versions or not.
Example
Number assignment for plan version 10 / object type S: Subgroup 10S
Standard settings
The entry $$$$ in the field subgroup represents all number ranges not listed explicitly. You should not delete this entry.
Recommendation
Since the matchcode function is available for the selection of objects, it is generally not necessary to assign "mnemonic" numbers.
SAP recommends that you use internal number assignment.
Activities
1. Enter the subgroup for which you wish to set up number assignment.
The following entries are allowed (when number assignment is not valid for all plan versions).
$$$$ (plan version and object type are generic)
PV$$ (plan version, object type is generic)
PVOT (plan version, object type)
The following entry is not allowed:
$$OT (plan version generic, object type)
The following entries are allowed (when number assignment is valid for all plan versions):
$$$$ (plan version and object type are generic)
$$OT (plan version generic, object type)
The following entries are not allowed:
PVOT (plan version, object type)
PV$$ (plan version, object type is generic)
Save your entries. The systems automatically creates an external number range (EX) and an internal number range (IN).
2. Specify the subgroup on the following screen and choose "Change intervals".
3. A new data screen appears on which you can maintain number range intervals. Choose "Create interval".
4. Enter the code for the number assignment (IN or EX), the lower limit and the upper limit of the interval in the dialog box which then appears.
In the case of external number assignment, mark the field "ext" also.
5. Choose "Insert" and save your entries.
Regards,
ARU

Automitic source of supply assignment in backend system for SRM

Hello Experts,
I am facing one issue regarding source of supply for SRM purchase Requisitions in backend ECC system.
When we create a shopping cart in SRM 5.0, a purchase requisition is created in backend and has source of supply assigned to it.
I donu2019t want to assign source of supply to purchase requisitions created for SRM.
Can you please suggest how to achieve this?
Also I think, SRM is internally using BAPI u201CBAPI_REQUISITION_CREATEu201D from backend ECC system for creation of requisition. This BAPI has an importing parameter u2018AUTOMATIC_SOURCEu2019, and if we pass space to this parameter, it creates requisition without assigning source of supply.
If this is correct, then can I use any BADI or customization in SRM to set the value of this parameter as space when SRM calls this BAPI?
Thanks in Advance.
Thanks and Regards,
Sanjay

SPRO--> SRM > SRM server> cross application basic settings --> Define objects in backend system (PR,RS,PO)
waht is the settings you maintained for your product category / purchase group - external procurement .
the above setting determines your follow on documents in the backend systems.
as discuused in the thread are you using any BADI ?
Unable to create PO in backend system for a text material in Shopping cart
peter offers how to debug to ..in the above link.
br
muthu

Incoming invoice number range per company code

Hi!
I have a doubt.
Is there the possibility of create incoming invoice number range per company code?
I need the MM doc, not FI doc.
Thank's!

Hi
If the settings available in OMR4 and OMRJ don't cover your requirements, try with enhancement LMR1M003.
Regards
Eduardo
PD: I found it, see Note 452127 - MIRO: Standard number assignment per company code, you have a sample of coding for this enhancement
Edited by: E_Hinojosa on Jul 11, 2011 6:37 PM
Edited by: E_Hinojosa on Jul 11, 2011 6:38 PM
Edited by: E_Hinojosa on Jul 11, 2011 6:42 PM

Funds mngt - Number range 01 not found for object BULI_DOCNR

Hi all
need some urgent help to crack an error am getting while creating a budget in funds management.
the error am getting is
"Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
I have maintained the number range in
Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
But am still getting the error....
will really appreciate some help on this
thanks in advance

The number range object refers to "FM budgeting line item number "
Are you using Former budgeting or BCS ?
Try t-code- ok11 and ok91 under former budgeting.
Thanks
Siva

Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

Hi Gurus,
When I try to capture deemed export license from J1ILIC01 I get this error
The number range is not maintained for Object/Year: J_1ILIC/
I tried to maintain number ranges in SNRO & SNUM there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

Hi
Just check if you have maintained number range for the correct year as shown in error.
Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

Message no. 8I766 Number Ranges are not maintained For Extended Withholding

Dear All,
I am facing the following problem when i am trying to generate the withholding tax certificate
1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax
     Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno in EWT.
I have checked all the above tables and found that the entries are maintained
2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
> here the following problems are faced
      A) . TDS Number is not coming
      B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
      C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
Please help me in soving the above issues
Thanks & Regards
Arun.R

Hi
You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
Thanks
GG

Backend system for SRM7.0

Hi Experts,
Now my requirement is upgrade SRM3.0 to SRM7.0.
the thing is currently we are using R/34.6C as a backend system for SRM3.0.
now the query is can i go ahead with the upgrade with R/34.6C itself or else i need to upgrade the backend system first to ECC6.0.
I believe R/34.6C will not support to SRM7.0 but i am not sure i am searching for the proper information but i am unable to find it out and one more thing do we need to use the backend system for SRM7.0.
Please can some one share the information regarding the above problem.
Regards,
Srini

Hello Srini,
You can leverage all the functionalities of SRM 7.0 with ECC 6.0 EhP4 only.
Though SRM 7.0 can be implemented with ECC backend as R/3 4.7 or higher, but the functionalities will be limited.
Hope this helps.
Thanks
Ashutosh

Ideas as a backend system for SRM

Hi All,
Please tell me wether I can use( r/3) ideas system as a backend system for SRM System.
Thanks & regards
SATYA

You can do that. Can connect an IDES(ECC) to SRM
Thanks,
Surya

Again: Define Number Ranges per Backend System for Follow-on Documents

Similar Messages

Maybe you are looking for