Automized customer data entry

Hi,
I have only a small question. Is it in SAP CRM 7.0 possible to fill fields on the IC-UI automatically?
Example Account
The Field ZTest has the initial value "123" on the first call in the IC-UI.
How do I implement this issue?
Thanks a lot for your help!
Regards,
Sascha

Hi Sascha,
Are you familiar with Component Enhancement concept using the Component Workbench? (t-code: BSP_WD_CMPWB)
If not, this wiki is a good starting place to learn: http://wiki.sdn.sap.com/wiki/display/CRM/HowtoGuide-EnhancingtheUIinCRM+7.0
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com

Similar Messages

Custom Data Entry Profie screen variant needed

hi All,
Our client was asking for making modification to the Order the columns currently being displayed for CAT2 trx.
Ex:
For profile 1, the client wants the column display in the following order:
Receiver WBS Element - Network - Actvity type - CO Area - Rec. CCtr
For Data entry profile 2, the client wants the column display in the following order, and doesn't want WBS Element to be displayed:
CO Area - Rec. CCtr - Network - Actvity type
I have searched if there are any screen variant options available, but not of much help. This is bit urgent, so awaiting your replies.
-thnx

Sreekanth,
Thank you for responding. I am in 'Data Entry view' (CAT2 trx), and, I do see a small icon with 3bars on top right hand corner. When I click on it & on 'Administrator' button, I see the 'Position' column vaues grayed out. I have tried using SHD0 for CAT2, and it wont work either. However, it is working just fine for MIRO trx.
Q-1: Can you please guide which 'Authorization' under SU21 -> HR I shall check in order to be able to change the layout?.
Q-2: I also see in Pg. 58 in http://help.sap.com/printdocu/core/print46c/en/data/pdf/CATS/CATS.pdf, the other option listed as -> worklist [Extern]. Do you have any idea on how I can track through this option?.
-thanks

Automator custom date ranges

Does anyone know if the "Find finder item" function in automator will allow me to find all files within a time range that is subject to change? I would like to use automator to find all files created "since last week" or "since three days ago". I am not talking about a specific date, my idea is that using an ical alarm, every night it will look for files older than one week or some other time period and delete them so my eyetv folder doesn't get too huge. The function of "before" only lets me enter a specific date not "today minus three days"

Hi Cornelius,
I'm not a particularly enthusiastic Categories user, but I can certainly see how they would be useful.
In this case, I suppose that you could add a column to calculate the week number that way you want and categorize on that column. Let's say that your dates are in Column A. The expression to calculate the week number of a date, with Monday being the first day of the week, would be:
=WEEKNUM(A, 2)
You would copy the formula to your week number column.
Regards,
Jerry

Creation Of Custom Transaction For RF enabled devices "mobile data entry"

Hello Everyone,
i need some information, or some material or some example's for creating custom transactions that will invoke the standard good issue transaction of sap from the handled device using the RF , so can anybody give some reference which will help me in creating custom transaction for a RF enabled handled device, which will invoke the standard sap goods issue transaction( mb1a) ,, there are some LM-transaction which do goods issue from the RF enabled handled device, but in my case i want to do goods issue using reservation as my input, so can anybody guide me or send some reference material matching to my problem, i would really appreciate it..
thanks in advance...
sapient2006

Hi Hussaini,
Here are the steps.
1> Customization needs to be completed in SPRO. Logistics Execution -> Mobile Data entry section. Also compare entries with LM01 for understanding.
2> In the 'Define menu management', you can create dynamic menus. For Menu or transaction type, if you enter "1", a menu appears; if you enter "2", a transaction appears. Custom transactions can be created and assigned here.
Once that is done, when you execute LM01 you will see your custom transactions come up. Make sure that these are created keeping in mind the RF device screen size and limitations.
Regards,
Anand.

Is there a date entry widget for XMP custom file info panels?

Looking through the Custom File Info Panels documentation, the samples, and the default info panels presented in Photoshop, I can't find any reference to a date entry widget - the closest I've seen is the date_static_text widget.
Is there any way to present an editable, validating date entry field to our end-users through the File Info panel?
(the info we're wanting to store is a release date so it's user-specified, and not derivable from the file in any way)

Mark,
The PDF/A extension schema provides a big step to the self-sufficient functionality that you are asking about. It permits the XMP schema description information of custom XMP schemas to be embedded into the XMP as payload so that the file can be opened in years to come and the target metadata acurately interperted. Currently, PDF tools are active candidate to make use of this facility. However, there is nothing preventing future use with other file formats, and other tools (via plug-ins?).
It does not include vocabulary, static text, and panel presentation layout information.
http://www.pdfa.org/doku.php
It defines a "known" subset of standard XMP properties from the 2001 XMP Spec. Everything else is "custom".
You could craft a custom File Info "template" with the PDF/A extension for your custom XMP fields. Then import the template into each file.
The PDF/A extension schema itself is implemented with multi-dimensional XMP arrays. MetaGrove Plug-in dialog screen shots can be viewed on http://www.poundhillsoftware.net/Acrobat.htm
Regards,
Carl Rambert

No Data in Reports Details in Custom date range

Hello, iTunes U Public Site Manager Admins.
As the iTunes U Public Site Manager admin, I've been trying to access our institution's iTunes U Reports Details for a couple of days. (I send a monthly report of usage to our course/collection contributors.) When I custom the date range, under Details, there is zero entry; "No data available in table" message is shown.
This feature had been working well since Apple iTunes U added this enhancement on August 13, 2013. The report Details showed the exact stats for Browse, Subscribe, Download, Stream, and Enclosure for each course/collection in the custom date range.
Now under "Details", the data is shown only when the date range is Last 30 Days. It shows no data in custom date range when the Calendar is used to select a Start Date and End Date.
Has anyone else noticed this problem?
Thanks.
Q. Wang

Erik.
I used your suggestion and it worked very well. This is how I did it.
Export the range of data that includes Feb. 1-Feb. 28, 2014 as .tsv file.
Open that file in Excel.
Add a blank column next to the Date column. Use function =Month() to just extract the month into the new column. Fill down the whole column. Then copy and paste special (value) into the same column (I have over 26,000 rows of data in the file.) Converting to Value will allow for the next step of PivotTable.
Create a PivotTable for the 26,000 rows of data. Use Month as the Report filter, iTunes_ID as the Row Labels, Select Browse, Subscribe, etc. as the Sum Values. (The result is a summary table with about 200 rows.)
I then do a Vlookup to my premade Master file to add Category (course, collection, resources) and Instructor Name to each of the 200 rows.
That will do it for my monthly report.
Thanks for your tip again. I did not know the .tsv file would have DATE for each item.
Sincerely,
Q. Wang

Extending DataFinder to include Non-Data Entries and Relationships Between Entries

I am trying to create custom data centralization and management software for our lab with DataFinder Toolkit. In addition to storing data from data acquisitions, I want to be able to store additional information with the data such as images, pdf files, word documents that can be easily accessed after finding the data. My current idea is to handle external files by storing the filepath in a property of an object vs trying to store the data itself in the datafinder database. My code would know how to open these files so the user can see them with external software or a custom labview app.
I also want to be able to store non-data objects such as an object that describes a piece of test equipment or a sample through properties and external files. Images and documents are again important here. And then create relationships through unique barcoded IDs that are a property in the datafinder entry. So not only could I look at the data, I could find information about the samples and lab equipment. Or anything else we think needs to be saved.
The code I am writing around DataFinder would be in charge of maintaining the unique IDs and know how the relationships between those IDs work to generate the proper queries. Like a 'Get Test Equipment Used' button next to a search result.
For the external non-data objects I was going to use Labview code to create a file with all the information about the object (unique ID, properties and external file paths) and create a plug-in so the datafinder will index the file and make it searchable.
Does this seem reasonable? I like the idea of working with one system and having everything update based on adding, deleting and modifying files in a folder. Also, I like the idea of not splitting the data management up into multiple technologies and having to make those work together.
Solved!
Go to Solution.

From the description, you've given the system seems plausible. The non-data elements you discussed when broken down are just additional data to associate with an object. Storing file paths seems plausible as done in the community example below:
Execute String/Numeric Querry Using Data Finder Toolkit
https://decibel.ni.com/content/docs/DOC-10631
Regards,
Isaac S.
Regards,
Isaac S.
Applications Engineer
National Instruments

How can i put customs dates/anniversary dates from my contacts into my iphone calendar?

I have set up custom dates in my contacts as well as anniversary dates. I'd like to know if there is an app to import these dates into a calendar, it doesn't have to be the iphone standard calendar. I'd just like them to show up as a normal calendar entry, rather than having to add them manually into the calendar. Also, if you have an anniverary date in a contact, and then a relationship as "spouse" to another contact, does this not assume they will have the same anniversary date and therefore update their contact details with this event too ? I don't mind having to buy an app, but most of the ones i have read only add birthdays, and i want to ensure all the custom dates I have set up get imported. These are for friends children's details who don't have their own contact set up in my phone. Thanks, any help appreciated!

View Purchase History
http://support.apple.com/kb/HT2727

Issue in creating a custom data model from BP

Hi Team
We have a requirement to create a custom data model by copying data model BP. I have successfully created new data model ZP . I have copied the UI for searching from BP. Issue is when i search a business partner ideally it should not display any entries because i have just created the data model, But it is taking entries from BP and getting displayed. Please let me know how to map data model to search UI. I dont see option USMD_MODEL here

Hi Imran,
actually that is not an issue but a designed feature. I'm afraid that you need to re-think your whole project. The explanations is rather simple:
Data model BP in MDG is a so called Re-Use Area data modell. This means that active data (records that are currently not stored in a change request) are saved in existing SAP ERP data base tables like BUT000 for the business partner master data and LFA1 or KNA1 for Vendor or Customer master data.
If you copy data model BP to ZP you still refer to the same active area. You will always find the same active objects - no matter which data model you are actually using for the user interface. The only difference wil occur for objects being currently processed in a change request. In that case a separation between BP and ZP is possible. But this won't help to solve your issue.
From SAP side I can only recommend not to copy BP but to find a different way of integrating your project needs into BP.
Best regards
Michael

Custom Data Table in Work Manager 6.1 / SMP 3.0

Hi folks,
was trying to create a custom Data Table in Work Manager. Unfortunately I was not successful to get it working - probably I am missing out something.
Have created the DataTable in the Agentry Editor and configured the Java Class to use the DataTable class like for the other DataTables. Then created the 4 config values in the parameters of the Mobile Application Configuration (DT_MDOID, TABLE_CHECK, TABLE_REFRESH, ENABLE_TABLE). Also created a MDO that is mapped to the DT_MDOID which is derived from the /SYCLO/CL_CORE_DT_HANDLER class.
During sync, I am getting the following errors in the server logs - in the client it is Error 13 => Java...
08/13/2014 18:18:36, 1,         0,         2, Thr      10364, class RCP<class DT::DataTable>, D:\Syclo_BuildBot\rc_7.0server\Syclo\refcount.h#220:RCP<class DT::DataTable>::operator ->
2014/08/13 18:18:36.505:             + BackEnd=Java-SAPJavaConnection
2014/08/13 18:18:36.505:               Using Java code for <DATA_TABLE_NAME>
2014/08/13 18:18:36.506:               Java Exception "<DATA_TABLE_NAME>" Update Data Table: - java.util.NoSuchElementException
Do you have some pointers on what I may miss out?
Cheers,
Florian

Make sure that 'DT_MDOID" parameter entries are maintained correctly "That there is no typo's" in config panel. I don't think you need any entries for TABLE_CHECK, TABLE_REFRESH, ENABLE_TABLE parameters which are only relevant for complex table. Same in Agentry the data table should match with SAP name.
Let me know if you still have issues.
Thanks
Manju

Two step confirmation with RF device (Mobile Data Entry) - 1st step only

Hello
I want to implement the following scenario:
- WM transfer orders are created, relevant for two step confirmation;
- a user working with RF device confirms the 1st step - picking;
- then the materials are transported physically to another building (the same warehouse number);
- another user working with RF device confirms the 2nd step - putaway.
For confirming the 1st step I tried to use standard transaction LM07. Confirmation of the 1st step is working fine but right after that a screen for confirming the 2nd step is displayed to the user. I would like this transaction to finish just after confirming the 1st step and not to proceed with the 2nd step immediately - because the confirmation of the 2nd step should be done by another user (with some other transaction).
What is more: if you exit the transaction manually after confirming the 1st step the system saves the TO number (in table LRF_WKQU) and in some circumstances triggers the screen for confirming the 2nd step even if you do not run LM07 - this is so called "recovery" function which is a nuisance in my case.
So my question is: is there a way to customize LM07 so that it finished processing automatically right after confirming the 1st step for a two step confirmation TO ? (and without storing data for "recovery" function). Or maybe some other mobile-data-entry transaction should be used for that ?
regards

Hi Vlad,
One more information, which i would like to communicate on this issue.
We have raised OSS message to SAP on this issue. They have replied back that, on screen 1302, we have some custom code which is interfering with the system behavior.
As of now, we have analyzed at our end, and we found that, the enhancement at screen 1302 is restricted for the functionality, and in theory, this enhancement should not be effecting at all the system behavior.
SAP has suggested to test the scenario , without any enhancement on screen 1302.
Still we are in discussion with SAP, and try to find out the resolution.
Can you also check in your system, if you have any enhancement on screen 1302 ? And if yes, does it interfering with the stander SAP codes.
Thanks & Regards,
Raj.

I have a problem in the data entry Visa card please help

I have a problem in the data entry Visa card please help

abdulaziz711 wrote:
I have a problem in the data entry Visa card please help
Is this what you mean...
http://support.apple.com/kb/TS1646
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Custom Table Entry not in Sync between Different Environment

Hi All,
we have different environment like Dev System, Quality system, performance testing system etc... these are all environment customs table entry not in syn .. Table entry should be syn. How to make it syn all the entry between all environment without do any manual work. Kindly help on this.
Thanks

Hello Mohammed,
It depends on what type of tables you are referring to. If you have a table of type 'Customizing', you have to transport your table entries across different environments and they will be in Sync.
If you are referring to tables of type 'Master Data', they have to be maintained in all environments.
Table of type 'Transaction Data' by default have different records based on your day to day transactions.
You cannot have all custom tables with same data in all environments. Hope this helps.
Rgds,
Vijay.

Problems with Custom Data Types when converting from TS 1.0 to 3.0.

I am currently involved in the process of converting a test environment from TestStand 1.0, LabVIEW 5.1, and Windows NT to TestStand 3.0, LabVIEW 7.0, and Windows XP. We use a custom Operator Interface developed in LV. Based on the entered Model and Serial number, the appropriate Test Sequence is called. We also use a custom Process Model. The steps in the Test Sequence are either LV code modules or DLLs created in C++. We have LV SubVIs and C++ API functions that allow the developers of the test steps to add data to various Custom Data Types. For example, a developer may set up a test to add a note (Step.Result.Notes[x].String) when the test fails. Step.Result.Notes is a container for an array of strings. The attempt to set a note first attempts to use SetDimensions to redimension the array, then SetValString to set the value. These notes are added to the report. On the old system, everything worked fine. A note could be added to any result. On the new system, if a note is added to say the 5th result, but results 1-4 do not have a note, the test sequence ends and the Operator Interface returns to waiting for data entry (as if no test ever happened). No report is generated. The LabVIEW libraries have been modified to solve this problem by calling SetDimensions to incrementally increase the array size by one, and populating the unused TestStand array elements with an empty array of LabVIEW strings using the SetValString call . In other words, based on the previous example, if the user wants to set a note for the 5th result, the notes for results 1-4 must first be sent an empty array of strings. The report will only display the note for Result 5 (as desired). In addition to this being cumbersome, attempting to implement the same workaround in the C++ API has been unsuccessful because even though the note arrays for unwanted notes (1-4) is initialized with nothing, it is still displayed as a note (empty) on the report. If anybody knows what is wrong and what the solution is, it will be appreciated.

Aaron,
Thanks for your reply. I will attempt to clarify. I am working with a single step. The step calls a DLL. The DLL performs many 'checks' on the UUT (e.g. Model Number Check, Serial Number Check, Calibration Constants Check, etc.). Under the Type Palette - MyTypes.ini, we have a Step Type called TEST_DLL with a container in it called Results. In the Results container are a number of things, but I will only list the important ones:
Notes (Array of Type 'Notes'; Type 'Notes' is a Custom Data Type (container, Type Definition)containing an array of strings called 'String')
-Notes are generally set when on of the checks fails, otherwise no Note is set for the check.
Val (Array of Type 'Val'; Type 'Val' is Custom Data Type (container, Type Definition) containing a Boolean called 'Boolean')
-Val indicates whether the check passed of failed
Pseudocode example:
//Model Number Check
check# = 0;
resultBOOL = ModelNumberCheck();
SetDimensions("Step.Result.Val", 0, "[0]", check#);
SetValBoolean("Step.Result.Val[check#].Boolean", 0, resultBOOL);
if(resultBOOL == FAIL)
Note# = 0;
SetDimensions("Step.Result.Notes", 0, "[0]", check#);
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Model Number Check failed");
Note# = 1;
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Model Number = 1234");
//Serial Number Check
check# = 1;
resultBOOL = SerialNumberCheck();
SetDimensions("Step.Result.Val", 0, "[0]", check#);
SetValBoolean("Step.Result.Val[check#].Boolean", 0, resultBOOL);
if(resultBOOL == FAIL)
Note# = 0;
SetDimensions("Step.Result.Notes", 0, "[0]", check#);
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Serial Number does not match expected");
More Checks
As you can see above, the "Step.Result.Val" array is redimensioned for every check. The "Step.Result.Notes" array is only redimensioned when a note needs to be added for a failing check. If the entire step executes and no check adds a note, the sequence is fine. If every check fails and therefore every check adds a note, the sequence is fine. However, if there are any gaps (e.g. check 0 adds a note, check 1 does not add a note, and check 2 tries to add a note), the sequence will stop. If I add blank notes for every check that would otherwise not have a note, the sequence completes, but the report shows the blank note.
Also, the exact code that is causing these problems runs fine on our old systems (TestStand 1.0). I hope that I clarified the problem and thanks again for the help.

JTable as a data entry screen

I am trying to use JTable for data entry. I assign few columns to contain
Integer class type and others with Float. Now, the problem that arise is
that Objects of Integer and Float are sub-classes class Number and JTable
has by default a Cell Editor defined to handle this Class type. The problem
arises only when a float type is handled. Floats which i use carry either a 3
decimals or 2 (basically quantity is represented in 3 decimals and amounts in
2 decimals). But for eg if i have a float 3456.78 i want that to displayed as
3456.780 and if 987.6 then 987.60. I can manipulate them in the required form
as a String but not as Number. (then its not right aligned). I have no clues how to do this and its very much important that i finish this asap.
Gurus out here please pour all the help you can .
Thanks in advance
Shomal

You talked about editors, but it seems like you are able to edit just fine. It seems that displaying a previously edited Float is your real problem. If that is the case, you just need to add a specialized cell renderer for displaying your Float objects.
First create an implementation of TableCellRenderer (it's easy, there is only one method) that returns your Float object rendered correctly.
Then just add the following code:
TableCellRenderer renderer = new MyFloatRenderer().
table.setDefaultRenderer(Float.class, renderer);
From now on Integers will use the regular Number Cell Renderer and Floats will use your custom renderer.
If you have a problem with the editor also, the steps are similar.
Implement TableCellEditor (only one method again) then add the following code:
TableCellEditor editor = new MyFloatEditor();
table.setDefaultEditor(Float.class, editor);
Offer duke dollars next time, you'll probably get a more timely response.

Automized customer data entry

Similar Messages

Maybe you are looking for