Availability check controll

dears gurus,
in OPJJ we can set “receipts in the past” for “availability check controll”.
how does it works?
If I’m going to convert planned order in process order (COR8) for material A, composed from B and C, in which case it give me the message “Past receipts were taken into account”?
Thanks in advance,
Best Regards.
Juan

General Setting:
"Blank" Include receipts from past and future
This is the one most of the process will be using
Option-A
A     Include receipts from past and future, with messages
In this case ...it will include both the receipts but you will get a message when the Availability check is done ..this is an information message.
Option-B
B     Include future receipts only
In this case it only considers the future receipts..which means if we hvae any reciept element before the requirment date it will not be considered and this doens give any message
Option-C
C     Include future receipts only, with a message
This performs the same activity of the Option B but with a information message
Let us know if you are looking for more specific information...
reg
DsK

Similar Messages

  • Availability check control - how to include stock in transit (frm 351 mvmt)

    We are trying to adjust the config on the availability check control settings to include intransit stock (settings in OVZ9 spro t-code). 
    This is stock that we have processed into intransit in the receiving plant via movment 351. (MARC-TRAME).
    Is there a way to change the availability check settings to include this stock?  I would like my sales orders to see this instranit stock as available.  I have tried using the StockIn Transfer flag (under Stocks category) and also tried using Incl.rel.order reqs falg (In/outward movments category). 
    Appreciate any feedback.
    Edited by: Peter Boese on Jan 14, 2009 10:37 PM

    Hi,
    Exclude the stock in transfer from availability check in tcode opjj.
    Regards,
    nandha

  • Longer time for Material Availability check while creation of prd order.

    Hi guys,
    I am facing a weird problem while creating production orders thru CO01.
    I enter the component and plant and I am also using the forward scheduling option.
    for some reason, SAP is taking a long time for material availability check when I hit the release button.
    Sometimes its taking more than an hour. Its happening with few specific BOM's, and I have checked the master data but I could hardly find a problem in master data.
    Can someone suggest me some tips ??
    Thanks & Regards,
    Sashivardhan

    Hi,
    Please check the Availability check control maintained for Components it should be 01 or 02. Also check the issue storage location maintained or not. You can maintain issue storage location in BOM in Status/lng text tab in Production Storage Location.
    Hope this will help.
    Regards,
    Navin

  • Availability check on storages in sales order and delivery documents

    Hi all,
    I'm verifying if it's possible to find a standard or a custom solution for this type of problem:
    I have a scenario in which there are more storages relevant for MRP (ex. 01, 02, 03, 04), and, in if I check availability in sales order or delivery (using checking rules "A" or "B") with setting which considering storages location inspection in availability check control, system check if there's stock available on all these storages.
    I'm trying to verify if it's possible to consider only some on these storages (ex. 01 and 03 only) in sales order and delivery documents availablity check.
    I know that in sales order storage location field is normally filled only using exit, but i don't know if it's possible to do, using a user exit, check availability considering only some storages and not all. At delivery level i have tried to use stock strategy, but this functionality don't have consequences on availability check, also if it's relevant during good issue phase.
    Any suggestion will be appreciated.
    Regards
    Gianpaolo

    Hi Gianpaolo,
    We had some issues with availability check on a Customer Site.
    I don't remember right now if we had to exclude storage locations from MRP to take them out from ATP, but I guess Shiva is 100% correct.
    At the end, what was done was to always "force" a unique storage location in the sales order item, which will be the storage location used for shipping of the delivery of course.
    If you use WM in your plant, then you will have no problem in having a unique storage location, so no problem.
    Anyway you are correct in your analysis, if the Storage location is not informed in the sales order item, then all the plant stock is taken in account for ATP.
    Best Regards,
    Franck
    Freelance Logistics SAP Consultant

  • Availability check - sales order

    Hi experts,                              
    I've gone through the relevant info, but still hit the issue below. Pls help. Thx.                                                       
    Issue: How to include the created order (not delivered ) when running availability check?                                                       
    Example:                              
    Stock (storage location C) - 1pc                              
    sales order A - 1pc (confirmed in schedule line)                         
    sales order B - 2pcs (1pc confirmed, 1pc unconfirmed)                                                       
    Those two orders are created agaisnt storage location C. No other stocks against storage location C are available, such as on-order stock.                              
    In my understanding, order B cannot be confirmed as order A has been created firstly.                                    
    Background: As the customer just sells the purchased product, he places PO firstly, then sales order following. Thus, he requests new sales order creation to be based on the stock qty, created sales order qty, PO qty to be received & delivered sales order qty.                                                       
    For this sales scenario, availability check with ATP is activated, but not against product allocation. And the check boxes "incl.purchase orders", "include sales reqmts", "include deliveries" are checked in OVZ9 only.                              
    ps. "Check sales requirements" has been checked in Availability check control while "No storage location inspection" has not been checked.

    Dear Cathy
    Can you please reconfirm that the combination of availability check and checking rule in OVZ9 in which, you have selected the box "Include sales reqmts"  is the same value what you have maintained in material master MRP3 view for availability check ??
    If the availability check is same in both the cases, then try to create a fresh order and post the outcome.
    thanks
    G. Lakshmipathi

  • In sales order availability check problem

    Hi
    In sales order I when I enter the material availability happening.........
    ex. My material 00001 I raised the order for 100 quantity on 01.04.2009 on that time system showing availability of stock only 50 quantity available....on 02.04.2009 I posted 200 stock through transfers....Total my stock is 250 quantity as on 02.04.2009 . When i am doing delivery on 02.04.2009 only 50 quantity copying to delivery for the material 00001.
    no reservations are there.....02 availability check is there in my material master..
    if i come sales order if i go to 00001 material line item schedulines if i change the date..manually then only system updating 100 quantity in sales order................
    why its happening...........in sales order 100 line items are there .if i do delivery some line items only quantity copying.its very difficult to remember which item is copied to delivery...........
    Any suggetions please.......
    Thanks
    Sree

    Dear Sree sree
    sales order is created for 100 units and stocks are there for only for 50 units on 01.04.2009 so the confirmed qty is given as 50 only on saving the sales order
    On 02.04.2009 there are some stocks flowing in your plant /storage locations so on 02.04.2009 the qty becomes 250
    Now on 03.04.2009 the sales order is due for delivery but in delivery only 50 units has come eventhough there are 250 units stocks
    This is your problem
    The system response is very correct
    If you want the system to confirm 100 units on 03.04.2009 this wont happen automatically
    You have to put the order in VA02 mode and redo the availability check
    By doing that the system will confirm the stocks for 100 units
    If your OVZ9  availability check control screen is configured properly then while creating the sales order itself these incoming stocks of 200 units can be taken into account so that the order 100 can be confirmed in VA01 itself
    If your checking group is 02 in MMR then in OVZ9 for the combination of 02 and A (sales order) you can control these
    Go to OVz9 and press F1 in each and every check box
    You will understand it much better
    Regards
    Raja

  • Availability check for sales order stock

    Hi,
    We use sales order stock in sales order which creates purchase requisition automatically.Movement types for GR 101E, for GI 601E. Material master data has on MRP2 view as GR processing time 2 days for example. I create sales order with requested delivery date today.After saving SO, PR is created and I create PO with delivery date today and post goods receipt document for today. System gives as confirmation date today + 2 days. although the material is in stock.
    We use also project stock in sales order which creates purchase requisition automatically.Movement types for GR 101Q, for GI 601Q.I run the same scenario for the same material. As soon as I create the purchase order system confirms the open quantity in sales order for today. (Scope of availability check is the same for both sales orders and includes PO)
    What can be the reason?
    Thanks

    Hi Murat,
    i guess the problem is with the 'Check without RLT' indicator' in Availability check control. For the MTO (checking rule AE) i guess this indicator is not set but for the Project systems (Checking rule PS) this indicator is set. This makes the difference. Do the changes as desired in transaction OVZ9.
    Please check and revert back if you are still facing the same problem.
    regards,
    Kathir

  • Changing Availability Checks in Sales orders

    hi there,
    Can i easily change the Availability Check in a sales order?
    i have 5 sales orde rtypes, and I sometimes want to change the Availability Check, how can i manage this?
    thanks

    There are three types of availability checks
    1. Availability Check with ATP Logic or Against Planning
    2. Availability Check Against Product Allocation
    3. Rule-based Availability Check
    For ATP logic, the Checking group and Checking rule combination determines the availability check parameters. The checking group is maintained in the material master, and not to Sales order type. Hence you can control by having different groups attached to different materials.
    If you have Advanced Planner Optimiser (APO) then you can use the Rule based availability check. You can attach a Business transaction to a Sales document type and thus control the availability check in sales order level also.
    Refer the below extracts:
    <b>Define business transaction</b>
    Path : spro -- img -- sd -- BF -- Av chk and TOR --- Rule based availabilty check
    In this step you can define the business transactions. These transactions must also be available in the APO planning system. Here the availability check control is carried out for the transactions.You can find the business transactions in the APO planning system (Field BPROC) under:
    Global ATP -> Settings -> Rule-based ATP -> Conditions -> Assign rule strategy.
    <b>Assign business transaction to sales order type</b> t code VOV8
    In this IMG activity, you assign the actions you defined previously to the order types. This activates the availability check settings for this order type, that were maintained in the APO planning system.
    Regards,

  • Availability Check in VC

    Hi Experts,
       I am a SD Consultant ..and have started working with VC functionalities lately...had a question on AC for component items of the configurable material. How do we control AC for a configurable material at the sales order level? As far I know, we need to have the components availability check activated at the configurable profile level...in case, we have it checked will it trigger TOR and AC for ALL components?
    Thanks,
    Mandeep

    Dear Mandeep,
    The check box "component availability" in the configuration profile has nothing to do with the TOR or AC in a sales order. If this check is enabled, then during configuration simulation, a push button "Availability" will be displayed. If you click this it will show the component availability.
    It is just for a quick check to see if the components required as per the characteristic value selection, are in stock or not.
    In the sales order, system will consider the TOR , AC as per the settings maintained for the requirement class & Availability check control.
    Regards,
    Senthilkumar SD

  • Production order release Material Availability check

    Gurus,
    I have a production problem where the order can be released when the component for the order is in a restricted status.  This is not allowed by the batch search strategy.
    <u>Here's Problem Description:</u>
    When running on version 4.6C, I have a work order created. I release the work order successfully.  However there is a component that has an invalid material/batch according to the batch search strategy  The material availability check shows all components available. 
    However, I remove the batch and the batch can not be entered because it is not correct according to the batch search strategy.  I try and release and the material is added to the missing parts list.
    I change the component so that it can be used.  
    Put the batch number back in the order. 
    Save the order.  
    Change the component material/batch so that it is no longer valid.  
    The order will release and it shouldn't because the material/batch is not valid.
    <u>I've looked at the following transactions and master data:</u>
    OPL8 - Order Type - Dependent Parameters Overview for my plant and order type and the check batch box is checked.
    MM03 - Material Master MRP 2 view for the component to get the availability check
    OVZ2 - Availability check control
    OPJK - Order Control to get the checking rule for order release
    OPJJ - Availability check control details with availability check and the checking rule for order release - I did not see anything here that would influence the checking based on if the batch was entered or not.
    I did double check the batch search strategy for production order - COB3. Everything looks OK there.
    Does anyone have any other places to check? I must be missing something. I tried OSS - there weren't any notes that I could find.
    Thank you!
    Michelle

    Hi,
    Check in order control opjk for order type pp01
    Batch assignment /release material
    Release despite missing batches
    no release if batches are missing
    Regards,
    nandha

  • VL10A - Stock on hand Availability Check before creation of delivery

    Hi,
    I'm trying to figure out how to control the creation of delivery via VL10A to first check for actual receipted stock before allowing the delivery to be created.
    eg. Material X has inbound delivery date 01.07.2011.  Sales Order has delivery date of 01.07.2011, thus schedule line has confirmed date of 01.07.2011.
    On 01.07.2011, inbound delivery has not yet been GR'd into stock, VL10A runs with current date set and outbound delivery is created for Sales Order, despite the stock not being available to deliver.
    Where does this check (for available stock on hand) need to be performed?
    Is there a setting in the input parameters in VL10A? If so which specific parameter on what tab controls this?
    If not, does this need to be handled in the Availability Check & Transfer of Requirements configuration of the sales order, so that the schedule line is not confirmed until the goods are in stock?  If so, what specific config is required to achieve this.
    During my research I have found responses indicative of both areas however no specific examples are available. Thanks for your help
    Jodes

    Hi
    Please check OVZ9 . In availability check control you can control the in/outward movements.
    Hope it helps
    Karthik

  • Availability check in co01

    Hi
       In CO01 when i try to create a new order, for a BOm material stock is nto available, Even the it is relesing the order. WHy
    regards,
    PradeepM.

    Dear Pradeep ,
    Couple of checks on this issue :
    1.Goto MM02-Materila Master -MRP3 view and assing the Availability Check Control Key -01/02 as  applicable if it is missed out.
    It should be PP availability check as per OVZ2-Checking goroup and OPJJ -Scope of Check , Asisngment of Checking Control in OPJK best (PP checking rule , Individaul Availablty Check 02/01)
    2.Check whether you have material which is not blocked in Basic Data-Xplant Status -01
    3.Check wether those materials are having MRP  Type " ND.It will not appear in MD4C or MD04 order report after MRP run on FGin MD02.
    4.What is the valididty of those items in BOM -Check in CS03-BOM header Valaidty from and to and Items Validity in BOM Item overview .
    Regards
    JH

  • Controlling scope of availability check

    Hi,
    The requirement is to have different scope for availability check when Standard Sales Order and a Replacement Order (Replacing the goods for free).
    In the above scenario, the item category is different, so we can have different requirement type, hence can have different requirement class.
    Item category determination is based on Sales document type, but availability check do not have any control at sales document type level.
    Scope of availability check can be controlled with the combination of Checking group (material master) and checking rule.
    I need clarification here on how we can get different scope of check for the same material.
    Clarification on this is highly appreciated.
    Regards.

    Checking Rule is assigned with Plant also. So if Replacement Order is created from a single Plant then you can achieve the same.
    Else if you don't want to run Availabily Check then you can remove the checkbox "Availability" from Schedule Line Category.
    Best Regards,
    Ankur

  • Control availability check during release of production order

    friends,
    Can you guys help me find the user exit/BADI which will allow me to control the release of production order after the availability check is complete.
    In detail, the scenario is that : based on a flag on material master, I should be able to ignore this product's availability during release. I cannot change the availability check to "KP" ( No check) as this product can be sold seperately. So what I thought was that if I get to control the availability check during production order release I would be able to ignore this product before check or may be after check and before the status change.
    I found PPCO0021 exit and function module EXIT_SAPLCOZR_003 which is actually intended for release control for automatic batch determination. I am not sure if I can use this.
    Please let me know if you guys have any idea.
    Thanks
    Prod_Planner

    Let me rephrase the scenario :
    I have a production order for a product P1 which consumes raw materials R1 and R2. R1 is supplied by a nearby vendor every 1 hour to my plant so I do not need to worry about the availability of it when releasing the order but R2 availability should be taken into consideration. So, function 1 or 2 in OPJK will not work (as release need to be stopped if R2 not available) hence I will be using 3. If I use 3, R1 availability is also considered hence the whole order is not released. I will maintain a flag on material master so if R1 has flag, I need to ignore R1's availability but still considering R2.
    As mentioned, I found PPCO---21 which could help me but need your help to understand if there is any other way.
    Thanks
    Prod_Planner

  • Grid Control 11g Agent: The free port availability check has failed.

    I tried to use 11g Grid Control agent deployment wizard to install 11g agent to an Oracle Enterprise Linux 5 (64 bit) server, but received following error message:
    PROBLEM : The free port availability check has failed.
    ERROR : Check complete. The overall result of this check is: Not executed <<<<
    RECOMMENDATION : Please free one of the ports in the required range
    The port I used is the default one - 3872. I used "netstat -a |grep 3872" to check if this port is in use, the "netstat" command returned nothing, so I think this port is free. I tried to leave the "Port" field empty and let Oracle automatically pick a free port, I still got the same error message.
    According to the log file,
    more prereq2010-11-22_10-42-27AM.out
    Starting execution of Prerequisites...
    Total No of checks: 12
    Performing check for CheckPortAvailability
    Checking for the availability of free ports in the required range.
    Loading file /opt/oracle/product/11.2.0/dbhome_1/localhost.localdomain_xxx//sysman/config/emd.properties to get the busy ports: Successful
    Loading file /opt/oracle/product/11.2.0/dbhome_1//sysman/config/emd.properties to get the busy ports: Successful
    Port specified by user null is not available
    Check complete. The overall result of this check is: Not executed <<<<
    Check complete: Not executed <<<<
    S_UNKNOWN_HOST_EXEPTION_BEFORE_CHECK: An unknown host exception encountered during the Port Pre Req Check.
    Recommendation: You must free one of the ports in the required range.
    Did someone encounter a similar problem before? Thanks for your help.
    Amos

    814475 wrote:
    I tried to use 11g Grid Control agent deployment wizard to install 11g agent to an Oracle Enterprise Linux 5 (64 bit) server, but received following error message:
    PROBLEM : The free port availability check has failed.
    ERROR : Check complete. The overall result of this check is: Not executed <<<<
    RECOMMENDATION : Please free one of the ports in the required range
    The port I used is the default one - 3872. I used "netstat -a |grep 3872" to check if this port is in use, the "netstat" command returned nothing, so I think this port is free. I tried to leave the "Port" field empty and let Oracle automatically pick a free port, I still got the same error message.
    According to the log file,
    more prereq2010-11-22_10-42-27AM.out
    Starting execution of Prerequisites...
    Total No of checks: 12
    Performing check for CheckPortAvailability
    Checking for the availability of free ports in the required range.
    Loading file /opt/oracle/product/11.2.0/dbhome_1/localhost.localdomain_xxx//sysman/config/emd.properties to get the busy ports: Successful
    Loading file /opt/oracle/product/11.2.0/dbhome_1//sysman/config/emd.properties to get the busy ports: Successful
    Port specified by user null is not available
    Check complete. The overall result of this check is: Not executed <<<<
    Check complete: Not executed <<<<
    S_UNKNOWN_HOST_EXEPTION_BEFORE_CHECK: An unknown host exception encountered during the Port Pre Req Check.
    Recommendation: You must free one of the ports in the required range.
    Did someone encounter a similar problem before? Thanks for your help.
    AmosYEP, overhere the same problem.
    Can't figure out yet what the problem exactly is.
    In our case I deinstalled a working 10.2.0.4 agent ( same port same config ) and tried to install 11g Agent.
    It fails with the above message. We however are on AIX, and that hasn't a 'netstat -p' option to find occupied ports easily.
    Because the database is question needs to be monitored constantly I now reinstalled the 10.2.0.4 agent again and works seemlessly
    Still unsolved.....
    FJFranken

Maybe you are looking for