Availability Check from CRM using ECC / Assembly Order

Hi,
we're using an ATP Check from ECC to CRM 5.0. As described in the SAP Notes, assembly orders are not supported in this ATP scenario.
Does anybody have experience to overcome this (without implementing APO or creating the orders directly in ECC)? Any enhancements / work arounds?
Thanks
Anke

Hello Anke,
you cannot have both, ATP check in CRM during order change/creation and in ERP when the order gets replicated to ERP-SD.
But when there is no ATP check used in the CRM at all (for the current item category), and the order gets saved in CRM and replicated to ERP, during this replication and order creation in the ERP-SD the regular ATP check in the SD order can run as usual, of course.
This means the scenario can be setup without ATP check in the CRM, but having assembly as usual in ERP-SD. Only the immediate information about the confirmed dates/quantities from the assembly order would be missing in the CRM order. 
regards,
Thomas

Similar Messages

  • Availability information at CRM using ECC with APO?

    Dear Colleagues:
    We are using availability information in CRM at ECC. Now we have a requirement to start using for some plant availability at SCM-GATP (APO).
    We should do availability information at ECC and if the plant is using SCM do the availability information at SCM and if not, do it at ECC.
    Does someone no if this is possible?
    Cecilia

    HI
    Mania you can do this availability info up load from CRM to Apo SCM but you need to transport the Availability info from CRM to Apo or SCM with the help of basis ask u r basis to move availability info from crm to Apo or scm, while you can directly Delta Up load from CRM to ECC R3 Ac4 and You can make use the Availability info and you can read this at ECC.
    Reward with Points
    Venkat

  • What are the steps to send sales order custom field from CRM to ECC

    Hi Xperts,
      We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
    We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
    Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
    Thanks in Advance.

    Hi Anjaneyulu,
    We are faced with a similar situation as you.
    Here is our scenario with the steps that we performed so far:
    1.  We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
         The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
    2.  On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
    3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
    4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
    5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
    Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
    In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
    Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
    Could you please give us the steps that you have done.

  • Error in Outbound Queue while Releasing order from CRM to ECC

    Hi,
    When I release my sales order from CRM to ECC, I got an error in Outbound Queue saying "Screen output without Connection to User".
    This is occuring in FM : BAPI_SALESDOCU_PROXY_UPLOAD
    Can you please tell me why this error is coming?
    Thanks,
    Sandeep

    Hello Sandeep,
    During the RFC call from CRM to ECC, this is a background processing, the screen call is not allowed.
    If a call screen is executed, there is the mentioned error.
    Please check in your ECC system, whether you have any user exits that have the coding 'call screen'.
    Best regards,
    Maggie

  • Mass sales orders from CRM to ECC

    Hi,
    We have a requirement to mass upload sales orders from CRM system ECC system. I could not able to find any option to push sales orders in bulk from CRM to ECC.
    Could you please let me know if you know any kind of solution for this kind of scenario.
    Thanks in advance!
    Regards,
    Kumar B.

    Hi Maggie,
    Thanks a lot for your response. But I could not able find CRMD_MASS_UPDATE in CRM system as well as in ECC.
    Could you please let me know how to try this other please let me know the program or tcode.
    Regards,
    Kumar B

  • Unable to access ECC transactions from CRM using Transaction Launcher

    Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
    1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
    2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
    3)     Is there any other issue and need development specifically related BOR TSTC?
    Warm regards and thanks in advance for your time.
    Prasad

    Hello JC,
    Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
    Transaction Launcher
    Regards,
    Ashik

  • How can I Force/relaunch BP replication from CRM to ECC

    Hi everybody,
    We had some replication problem with sold-to-party BPs when creating them in CRM (Tr Code BP). The CRM002 id was not implemented in most cases. A job was planned to relaunch the Bdocs automatically every hour. It seemed to be ok for a moment.
    However we still have some sold-to-party BPs that are not replicated at all in ECC (Master Data and sales data). The usual procedure we set to trigger the replication is checking a case in BP Tr. but when I uncheck the case and check it again, the replication doesnt happen.
    Is there a way to force manually the replication of a sold to party BP from CRM to ECC?
    Second question in replication subject : We also have partial replication in ECC. For example the Tax classification partially replicates. It's like if the replication process in crashing on the way and the result is no CRM002 id back in the BP master data in CRM. Do you have any idea of where it's coming from?
    Is there a Transaction like SMW01 (CRM) in ECC in order to trace replication problems of processes?
    Many Thanks.
    Laurent

    Hi,
       Firstly , please check if you have any filters in for adapter object customer_main in trx. R3AC1 (which prevants data replication)
    Next, check if your inbound (SMQR) or outbound queues (SMQS) of CRM are de-registered.
    You can use trnx.
    CRMM_BUPA_SEND
    to manually replication a BP to the ECC system.
    No.. there is no monitor in ECC like the Bdoc monitor (SMW01) in CRM.
    Hope this helps. Reward if helpful!
    Thanks,
    Sudipta.

  • Replication of storage loaction issue from crm to ecc

    HI Experts ,
    I am facing issue while store location replication from CRM to ECC.
    I have create field "Hub Location" using AET  on web  ui and behind that store  location search field is working .
    I have already created a Order . I have copied that order .Add store location .
    When i save Now all process executed and BDOC execute successfully with no error .
    I have enhanced BADI data exchange and add code in method crm_dataexchange_after_fill method and added store location .
    Issue : Now when i go-to to crmd_order transaction and checked that order then i am getting error that Store location plant is not defined .
    Please help .
    Regards ,
    Rishi

    Hi Rashi,
    Sorry for the late reply.
    Goto ECC system and find the FM "BAPI_SALESDOCU_PROXY_UPLOAD" and set the break point using your RFC user id (RFC user id from CRM to ECC and RFC user id should have the debug rights).
    Once you create the order in CRM and it will come to debug in ECC.
    Check TI_EXTENSION_IN tables whether your values are coming in.
    If not your CRM Middleware BADI coding was not done correctly.
    Hope this would help you.
    Regards,
    Bala

  • Wrong replication of partner "last name" from CRM to ECC.

    Hi everyone,
    In the specific environment of our company, we create business partners in CRM using t-code 'BP'  they are then instantly replicated to ECC (we visualize them using t-code 'XD03').
    When we create a partner as a person, the fields 'first name' and 'last name' (which are 2 distinct zones ) are concatenated into one single zone when replicated into ECC. I have visualized BDOCS using t-code SMW01, and haven't seen anything abnormal.
    I have been trying to debug the replication process, without any success.
    Please any clues on what I should do to get the problem solved would be very much appreciated.
    Many thanks
    C.K.

    Hi Rashi,
    Sorry for the late reply.
    Goto ECC system and find the FM "BAPI_SALESDOCU_PROXY_UPLOAD" and set the break point using your RFC user id (RFC user id from CRM to ECC and RFC user id should have the debug rights).
    Once you create the order in CRM and it will come to debug in ECC.
    Check TI_EXTENSION_IN tables whether your values are coming in.
    If not your CRM Middleware BADI coding was not done correctly.
    Hope this would help you.
    Regards,
    Bala

  • Replication of custom z fields from CRM to ECC

    Hello,
    I have created custom fields in CRM - Order using EEWB.  Similarly I have created custom fields in ECC - VBAK.  I want to replicate these custom fields from CRM to ECC.  Somebody had suggested to use CRM_DATAEXCHG_BADI and method -  CRM_DATAEXCHG_AFTER_BAPI_FILL.  Can anybody give me a sample code of how to populate table - CT_BAPIPAREX within this method? 
    Process followed was -
    1. ECC - Extend VBAK with zfld1
    2. ECC - Extend BAPE_VBAK, BAPE_VBAKX with zfld1
    3. CRM - Add zdoc1 using EEWB
    4. CRM -  Extend BAPE_VBAK, BAPE_VBAKX with zfld1 (same as ECC?)
    5. CRM -  CRM_DATAEXCHG_BADI and method -  CRM_DATAEXCHG_AFTER_BAPI_FILL. - This is where I need to map zdoc1 of CRM to zfld1 of ECC.  And then populate CT_BAPIIPAREX.  This is where I am stuck. 
    Thanks!

    HI,
    If you have added field in EEWB chosen R/3 Adapter, then it will also enhance the Exchange structures and thus i guess CRM_DATAXCHange_badi shud contain in one of its changing parameters
    The following blogs gives a good idea in the similar lines.
    /people/vikash.krishna/blog/2009/07/21/exchange-ecc-customer-master-standard-field-with-the-crm-z-fields-ecc--crm
    /people/vikash.krishna/blog/2009/07/14/crm-70-how-to--4-adding-custom-fields-with-the-new-application-enhancement-tool-aet
    Revert if you need further help.
    -Satish

  • UPLOAD OF EMPLOYEE BP FROM CRM TO ECC

    Hi all,
    Is it possible to upload Employee Business Partners from CRM to ECC system.
    as per client business process we create Employee Business Partners in CRM system and they need to upload in to ECC system.
    I have worked on downloading of Employees data from ECC to CRM using ALE IDOC.
    Please suggest whether it is feasible or not? If standard solution is available kindly let me know.
    Your help will be highly appreciated.
    Best regards,
    Raghu ram

    Hi ,
    The common practice is to download "Employee" from ECC to CRM thru ALE IDOC ,
    But you can also take another approach :
    1) Create  employee as business partner in role "BUP003" "employee" in SAP CRM .
    you can create manually or you can use BP upload program in CRM.
    2) You need to configure "internal number range " for business partner "emplyee " in CRM , and "External " in ECC Backend
    3) set up middleware for replication of BP from CRM to ECC .
    4) Business partners - EMPLOYEES create in CRM will be replicated to ECC as Business partner ( and not as HR employee )
    hope this helps,
    PD

  • Replication from CRM to ECC and vice versa

    Hi,
    I am a newbie and would really appreciate any of your advice and help. I was given a task to replicate business partner from CRM to ECC. I was advised to go through a building block in SAP Best practices for CRM called C03:CRM Master and Data Replication. I've read through the materials and found out that there are some prerequisites. Do I need to installed all of the prerequisites before I can proceed with the steps given in the building block. I hope anyone could reply to me as soon as possible.
    Regards,
    Julianna

    Hi,
    Thats right! C03 best practices would be certainly helpful to you.
    Few important steps for BP repllication from CRM to ECC would be
    In CRM , First define your Logical destination in BD54 .
    1) SU01 Transaction to create users : create user in CRM & R/3
    2) Transaction code SM59 : Create RFC DESTINATION .. here u use the users created for reaching into R/3 from CRM
    3) transaction code: SMOEAC: ADMINISTRATION CONSOLE:-
    here define Publication, subscription and site ( OLTP) , and define replication objects ( like BUPA_MAIN, BUPA_REL)
    4) define Queue: SMQR and SMQS - inbound and outbound queue /
    Que registration .
    5) check entry in R/3 side tables:- Make the proper entry into R/3 side tables in SM30
    a)CRMRFCPAR
    b)CRMPAROLTP
    c)CRMSUBTAB
    d) CRMCONSUM
    These are important steps for Middleware settings between CRM & R/3
    In addition to this , you need to correctly define your
    1) in CRM ,BP GROUPINGS with Internal Number range
    2) in R/3 define "Account Group" with "External Number Range" for BUSINESS PARTNER
    3) In R/3 , Mapping of CRM CLASSIFICATION with R/3 account group...e.g. Classification B for customer with ACCOUNT group of R/3
    You need to also map in CRM  correctly the partner functions and R/3 Partner functions.
    regards,
    PD
    Reward points if it helps...

  • Error in invoice posting from CRM to ECC

    Dear Guru's ,
    when we release the billing document from CRM to ECC , system throughs error messages and while we checking the confimation the below  green message is appering .
    --> Object link not known in CO
    Whatever the master data  we maintained in the order and confimation is perfect .Kindly advise why this green error is coming???
    Regards ,
    Pakalapati

    solved by my self

  • Sales Area Data isnt replicating from CRM to ECC

    Hi Gurus,
    We are replicating some BPs of certain groupings from CRM to ECC.
    We performed all steps relevant for this task mentioned in Best Practice u201CMaster Data Replication C03u201D. After performing the
    steps results are as follows:
    u2022     BP General Data is replicating without any trouble.
    u2022     When registering sales area data in CRM and trying to get this replication to ECC we see that the BP Sales Area data isnu2019t replicated.
    Monitoring SMW01.
    The BDOC BUPA_MAIN ended with the following error:
    Messages for business partner 0007000362: Fill in all required entry fields
    Action already taken:
    After reading this message I have reviewed the mandatory fields per Account Group in ECC and mapped them with the CRM ones. Even this changes I still can get sales area data in the ECC BPs replicated.
    Is there something I am missing here.
    Thanks for your help.

    Hi,
    Regarding debugging from CRM to R3. Please follow the below steps.
    There are 2 methods to debug the Business Partner (BP).
    First Method:
    1)     In CRM, Go to SM59 -> ABAP Connections => The ECC client -> See if the saved user (in logon details) that is used to connect to ECC from CRM is a Dialog user.
    2)     You can use transaction code SU01 to check User Type of User.
    3)     Deregister the Queue through SMQS.
    4)     Make changes to BP.
    5)     Go to SMQ1, Select the Queue name Double Click 2 times then select the Tool bar (Debug LUW).
    Second Method:
    1)     Put a break point in Function Module SMW3_MFLOW_UPDATETASKBDOC.
    2)     Create a BP and before save, type /h to activate debug, Mark update debugging option.
    3)     When stops in Function Module u201CSMW3_MFLOW_UPDATETASKBDOCu201D you must be sure to set header-dbgmode = 'X' this will make the BDoc stay stopped in SMW01.
    4)     Go to SMW01 and type /h and process the BDoc.
    5)     Put a breakpoint in Function Module u201CCRM_UPLOAD_AFTER_MAP_HANDLERu201D and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
    If the variable LV_SYNCHRON does not have any value, then it will work as background task, if the value is filled with the value u2018Xu2019, then it will allow debugging in R3.
    And another point to be noted here is, the user type of the R3 should be Dialog User. If the user is not dialog, then it will not connect with R3.

  • Changing documents downloaded from CRM into ECC, in ECC

    Hi
    Our requirement is to change documents downloaded from CRM into ECC, in ECC. I was refering to note 541113, but it is not of much use as we are using CRM 5.0. Also parameter that it says should be set I have set but ...obviously it didin't work. Please tell me what setting needs to be done for CRM 5.0 & ECC 6.0 so that our requirement is satisfied. I have searched SAP notes, without much success.
    Thanx in advance.
    Cheers
    Hits

    Hi,
    This is very simple.
    SAP has provided us with a new Scenario. this is called Scenario A.
    This scenario can be made Transaction Type specific.
    You need to maintain table  SMOFPARSFA in CRM and CRMPAROLTP in R3.
    SMOFPARSFA:
    Key = R3A_SALES
    ParamName = INT_CHANGE_ORDER
    ParamName2 = <Transaction Type>
    ParamValue = A
    CRMPAROLTP:
    ParameterName: CRM_SCENARIO
    ParameterName 2: INT_CHANGE_ORDER
    ParameterName 3: <sales document type>, for example TR
    ParameterValue 1: A
    Just do these settings and check. This must work
    Sharif

Maybe you are looking for