Availability Check - Storage Location

Hi,
Is it possible to exclude a Storage location from Sales Order availability check?  If yes, where do we maintain the SLoc exclusion?
e.g. Sloc 01 - FG Staging Area, Sloc 02 - FG Central whse...
We want that availability check should not look at Sloc 01 quantity ...
Thanks,

Hi
There are 4 ways of achieving this
1. You can exclude the storage locations trough S Loc MRP settings. check the MRP4 view of your material master > MARD-DISKZ controls how the S Loc is considered in relation to a material.
2. Please check the transaction OVZ9.
There will be one check box - No storage location inspection.
I think, by checking this check box, it won't check for the material at storage location level.
It will check only at the plant level.
3. spro...material management....consumption based planning....planning...define storage location MRP...
Here give plant name and enter...
Against every storage location you ll have indicators for excluding, including the stock....
4.Go to SPRO> Production>Material Requirements Planning>Planning>Define Storage Location MRP per Plant
For production storage loc put 1 -->Storage location stock excluded from MRP
By doing this it will not consider the production storage loc qty while running availability check .Go to SPRO> Production>Material Requirements Planning>Planning>Define Storage Location MRP per Plant
For production storage loc put 1 -->Storage location stock excluded from MRP
By doing this it will not consider the production storage loc qty while running availability check..
Regards
Raja

Similar Messages

  • Availability at Storage Location Level

    Dear All,
    While  creating a sales order system is checking the material  stock at the plant level it is including the stock in all the storage location
    we have several storage locations in the plant
    Hence i want to restrict the availablity to be done only for one storage location that is sales storage location
    Kilndly Advise
    Mohammed Raees

    Just try to populate the stock storage location in the sales order using user exit USEREXIT_MOVE_FIELD_TO_VBAP in program MV45AFZZ (or Userexit_Source_Determination in program MV45AFZB.). By this way, the system will check only in the particular storage location.
    Also check the link, which discussed similar requirement Re: Availability Check - Storage Location
    Regards,

  • Badi for ME21N & ME22N to check storage location

    Hello Guru's,
    I need BADI for ME21N & ME22N to check storage location is maintained for plant used in PO i'm using method IF_EX_ME_PURCHDOC_POSTED~POSTED with definition name ME_PURCHDOC_POSTED but this throws message on SAVE.
    But my requirement this message should be displayed before saving.Please guide

    Hi,
    Use BADI:
    ME_PROCESS_PO_CUST
    BADI CL_ME_PO_CUST
    Business Add-in
    ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
    ME_PROCESS_COMP                      Processing of Component Default Data at Time of GR: Customer
    ME_PO_SC_SRV                              BAdI: Service Tab Page for Subcontracting
    ME_PO_PRICING_CUST                    Enhancements to Price Determination: Customer
    ME_PO_PRICING                              Enhancements to Price Determination: Internal
    ME_INFOREC_SEND                        Capture/Send Purchase Info Record Changes - Internal Use
    ME_HOLD_PO                                  Hold Enjoy Purchase Orders: Activation/Deactivation
    ME_GUI_PO_CUST                           Customer's Own Screens in Enjoy Purchase Order
    ME_FIELDSTATUS_STOCK               FM Account Assignment Behavior for Stock PR/PO
    ME_DP_CLEARING                          Clearing (Offsetting) of Down Payments and Payment Requests
    ME_DEFINE_CALCTYPE                  Control of Pricing Type: Additional Fields
    ME_COMMTMNT_REQ_RE_C            Check of Commitment Relevance of Purchase Requisitions
    ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
    ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
    SMOD_MRFLB001                           Control Items for Contract Release Order
    MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
    MM_DELIVERY_ADDR_SAP                    Determination of Delivery Address
    ME_WRF_STD_DNG                          PO Controlling Reminder: Extension to Standard Reminder
    ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
    ME_TRF_RULE_CUST_OFF                    BADI for Deactivation of Field T161V-REVFE
    ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
    ME_REQ_POSTED                           Purchase Requisition Posted
    ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
    ME_RELEASE_CREATE                       BAdI: Release Creation for Sched.Agrmts with Release Docu.
    ME_PURCHDOC_POSTED                      Purchasing Document Posted
    ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
    ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
    ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
    ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant
    ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
    ME_BSART_DET                            Change document type for automatically generated POs
    ME_BAPI_PR_CREATE_02
    ME_BAPI_PR_CREATE_01
    ME_BAPI_PO_CREATE_02
    ME_BAPI_PO_CREATE_01
    ME_BADI_DISPLAY_DOC                     BAdI for Internal Control of Transaction to be Invoked
    ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Level
    MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
    EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
    ARC_MM_EKKO_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EKKO)
    ARC_MM_EKKO_CHECK                       BAdI: Enhancement of Archivability Check (MM_EKKO)
    ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
    ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
    ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
    ME_COMMITMENT_RETURN                    Commitment for return item
    ME_CIP_REF_CHAR                         Enables Reference Characteristics in Purchasing
    ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
    ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
    ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
    ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
    ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
    ME_CHECK_OA                             Check BAdI for Contracts
    ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO
    ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
    ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
    Edited by: Neenu Jose on Nov 21, 2008 6:13 AM
    Edited by: Neenu Jose on Nov 21, 2008 6:16 AM

  • Check Storage location while raising PO/SA

    Dear expets,
    Is there any config setting for this Requirement.
    If Sloc is not maintained for combination of Material and Plant (MMSC) then error message should come at the time of creating PO/SA.Presetly system is taking any storage location of that plant while creating PO/SA.At the time og GR system checking correct SL. I need this check in PO/SA creation only.
    regds

    Dear,
    Simple way of doing is make s.loc field mandatory in field selection 
    spro>MM>PO>define scrrenlayout at document level
    here check  field selection for  ur document
    Regards,
    Venu Gopal.S

  • Availibility check at Storage location level

    Dear all,
    we have implemented inventory management ( not wm and lean wm ) , my business scenerio is when i am creating the STO the availibility check is carried out which is considering all the storage locations of supplying site
    e.g  SL01 - Unrestritrd Use
           SL02 - Damage
           SL03 - Resrved
    My client requiremnt is when availibility check should carried out it should conside only one storage location i.e SL01 - Unrestricted use stock and should not considere Stock of other storage location except SL01.
    What configuration need to be done
    Thanks and Regards
    tara

    Dear,
    Check at: http://www.sap-img.com/sap-sd/configuring-availability-check-through-checking-groups.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-pp/availability-check-storage-location-1283776..
    Regards,
    Syed Hussain.

  • ATP check avoid block other storage location

    Hi Gurus,
    Let's say there is 4000 EA available in storage location 1000, but in the order we enter 5000EA. I don't want to addition 1000 EA block other storage location like 1603/1608, only block own location 1000 waiting for replenishment.
    We defined the storage location in sales order, but still the ATP check will block the stock in other storage location.
    Can I know your idea?
    thanks.

    Hi,
    Couple of notes you can check of;
    Note 547118 - FAQ: Result of ATP calculation
    Note 547512 - FAQ: Customizing of the ATP in R/3 (Question 8).
    Regards

  • MCHB,MARD - Stock available at plant level and storage location level

    Hi ,
    How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
    In MCHB-Stock at lot level is shown.
    In MARD-Stock at Storage Location level is shown lncluding
    the stock maintaned at the lot level.
    If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
    Do I need to subtract the MCHB Value from MARD Value ?
    Is there any other way available to find the stocks which is not maintained at lot level.
    Regards
    Prasath

    Hi prashant,
    What do u mean by stock maintained at SL level without batch level.  Do u mean that some materials are subjected to batch management and some or not?
    If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level.  But still what ever u are getting from MARD table isstock at SL level only.
    If u have activated batch management for any material, it will always be shown at lot level also.
    hope this clarfifies query
    award points if found useful

  • Availability check issue in SD

    Hello everyone
    I am currently having some issues during the ATP in Sales Order in SD.
    We are using Check Group 02 - A (Sales Order) with the following settings:
    Stock Overview --- *all are unchecked*
    Relenishment Lead Time -- *"Check without RLT" is checked*
    Storage Location Inspection -- unchecked
    In/Outward Movement --- the following are checked
    Inc. Purchase Orders
    Include Reservations
    Include Sales Order req.
    Include Deliveries
    Rest all is unchecked
    Now on a high level, what this does is that hard allocates the required Order Qty to the Sales Order if stock is available.
    e.g. Material XYZ has 100 EA unrestricted stock
    Order for 10 EA ... is allocated 10EA
    Now if a second order comes in for 100EA .. it will allocate only 90EA
    Now I was able to test this successfully with a newly created material in our development system.
    Later I rejected all the Orders that I had created for this material in ECC.
    Thus now MD04 for that material displayed no requirement.
    Now again when I tried placing an order for this material ... it wouldn't confirm.
    When I check the Availability Overview from the Sales Order, it shows the following details
    Material -- XYZ
    Plant -       WXYZ
    Total Display
    Receipts - 100
    Issues -- 300                        Confirmed Issues - 100
    ATP Situation
    Date, MRP elm., MRP element Data,  Rec./reqd qty , Confirmed , ***. ATP
    02/23/2011 , Stock  , BLANK , 100, BLANK , BLANK
    02/23/2011 , SimReq , Simulated Requirement , (10-) , BLANK , 0
    02/24/2011 , CusOrd , Totals record , (300 -) , 100 , 0
    02/23/2011 , SLocSt ,  LOC1 , 0 , BLANK , 0       
    02/23/2011 , SLocSt ,  LOC2 , 100 , BLANK , 100
    Note:
    I have put the dashes to allign them correctly. Also (10-) means negative 10
    Plant WXYZ has 2 locations viz. LOC1 & LOC2
    Currrently the stock of 100 EA is in LOC2.
    ALso LOC1 is responsible to issue the stock to deliveries.
    Question:
    Why would the ATP confirm 0 qty inspite of the Orders placed for it have been rejected.
    Note this material was never ever used before in Sales Orders.
    Any thoughts
    Thanks
    Vin
    Edited by: vinit parkar on Feb 23, 2011 8:38 PM
    Edited by: vinit parkar on Feb 23, 2011 8:44 PM

    Hey Shiva
    That did not fix the problem.
    I ran the program with Data Transfer checked .. but still the same issue
    Any other thoughts ?

  • Non storaged material in Storage Location after mov 653

    I have a non storage material.
    when the return delivery picking was done SAP let to put a storage location. for this Delivery item category wit has not flagged "Do Not Check Storage Location". So it has to be checked. Its also true that we have Storage location is absolutely necessary, so without storage locatin we cant deliver, but we should have an error message and not let us deliver using a storage location when its a not storaged material.
    And the problem is that when you have the material in the storage location you cant do nothing because the material has no storage data.

    Hi
    For the Return delivery , delivery item category is not flagged with the feild "Do Not Check Storage Location " . It is not checked because a Returns order are mostly created wrf to sales order / billing document/delivery document. So once you copy the data to the returns order and when you do Post Goods Receipt then at that time there is no need to copy the sloc.
    But ,if the material doesn't have storage data then we cant retrieve how much stock is available in storage locations. So we have to run the report to know how much stock is available in the storage location
    Regards
    Srinath

  • Issu storage location

    Hi,
    Where can we maintain (in material master) the   Issue storage location? like we can maintain storage location for Extl procurement in MRP view.
    Regards,
    Sattuj

    Hi,
    issue storage loc is maintained in the Bom item of the component or via MRP Group or in material master prodn storage loc,.
    Storage Location/Supply Area Determination
    Use
    You use the storage location/supply area determination function to define the strategy the system is to use in BOM explosion and in MRP to determine the issue storage location (production storage location or supply area) for the components.
    Integration
    The procedure described below is the same for both storage location determination and supply area determination.
    Prerequisites
    You must define the production storage location for the components in the BOM item of the assembly BOM. The system then reads this storage location in the BOM explosion and uses it as issue storage location.
    If you have not defined a storage location (production storage location) in the BOM, you can set the strategy the system is to use in BOM explosion to determine the issue storage location (production storage location) from which the components are to be withdrawn. You set this strategy for the MRP group in Customizing for MRP or for Repetitive Manufacturing in the IMG activity Define Stor.Loc./Supply Area Determination in BOM Explosion.
    Features
    In the BOM explosion, the system tries to find a storage location in the BOM item (component). If no production storage location has been defined for the BOM item, the system reads the MRP group of the assembly or of the finished product to determine the strategy for storage location determination.
    The following strategies are available for storage location determination:
    If you select indicator 1 (only component), the system searches for the production storage location maintained for the material in the material master record. This storage location is then used as the issue storage location and is displayed in the component list.
    You use this procedure for determining the issue location if you always withdraw one component from one specific storage location.
    If you select indicator 2 (only assembly), the system checks to see whether the proposal issue location has been maintained in the production version of the produced assembly or of the finished product. If the proposal issue location has been maintained, this location is used as the issue storage location for all components and is displayed in the component list. If no proposal issue location has been maintained, the system uses the receiving storage location of the assembly as the issue storage location for the components. You can maintain the receiving storage location in the production version of the assembly in the field Issue storage location or in the material master record of the assembly in the field Prod. stor. location. If none of these entries have been maintained, the system can also use the ‘to location’ in the backflushing transaction for Repetitive Manufacturing as the issue storage location for the components.
    You should use this procedure for determining the issue storage location if all the components are stored together at a storage location close to the production line where they are needed.
    If you select strategy "2" in repetitive manufacturing, the system checks the planned order for the production storage location. Then the system proceeds as described above.
    If you select strategy "3", the system first proceeds as described for indicator 1. If it does not find a storage location using this strategy, it then proceeds as described for strategy "2".
    If you select strategy "4", the system first proceeds as described for strategy "2". If it does not find an issue location using this strategy, it then proceeds as described for strategy "1".
    When backflushing for the planned order, the strategy is ignored. The system withdraws the components from the storage location saved in the planned order.
    Regards,
    nandha

  • Reg Storage location control when pulled materials via fixed bin replenishm

    We are Using Storagelocation Control Functionality in WM
    We have below Storage locations
    RW01 - Raw Material Storing
    PD01 - Materials staged for Production Lines
    I have setup RW01 as Standard Storage location and PD01 as 'not copied to TR'
    When i try to do bin to bin tranfer raw material to production lines From Bin in RW01 to Bin in PD01, TO has RW01 as expected, i Run posting change background job and this functionality is working fine
    We would be using Fixed bin replenishment strategy to stage materials for productions from raw materials storage
    I run LP21 for PD01, it has created TR but has storage location PD01 instead of RW01.
    PD01 shouldnt have copied as i have set 'Not to be copied to TR' for PD01
    Fixed bin replenishment doesnt support storage location control? does we need to go for customization ?
    Please help

    Please help
    Bin to Bin is working fine as per storage location control functionality set-up
    We have issue with fixed bin replenishment combined with storage location control
    Please share your inputs, Thank you
    While debugging we relaixed SAP doesnt check storage location control config at all while doing fixed bin replenishment, only custom solution to force system to check storage location control config and assign storage location is TR?
    Edited by: Sasi nagireddy on Jul 18, 2011 8:34 AM

  • Availability Check at Storage Location Level.

    Hi All,
    Currrently we have the availability check functionality happenin at the plant level. If the stock is available in the plant, then the sales order is getting confirmed. But, the requirement is if the stock is insufficient then system should check all storage locations attached to the plant. Can someone please guide as to how this can be achieved?
    Regards,
    Raghav

    Hi
    This is not a standard SAP functionality. Either you have to input the storage location manually in the sales order or to automate this,  you have to enhance the functionality using a userexit.
    Thanks,
    Ravi

  • Availability check with storage location

    Hi experts,
    I have one problem in availability check.I will explain in steps.
    There are two storage locations
    RMMU: main storage location where GR will happen from vendor.
    WPMU:WIP storage location from where material will be issued to production order.
    A is fert material.
    B is bom item (raw material) and in material master maintained WPMU production storage location.
    Now after sales order(100 nos) and after mrp run we will get the Planned order for 100 nos and Purchase requisition for 100 nos for material B.Now we will do the GR for "B" in Storage location RMMU.
    Now we will create the Production order for ''A''.After availability check in production order ,it will show the material availability.
    The problem is that we maintained the prod.storage location as "WPMU''and in that no stock is there.It is in RMMU.Still it is giving availability of material.
    Requirement is it check the stock in  prod.storage location i.e. WPMU
    Please throw some light on it.
    Thanks in advance.
    Regards
    VILAS

    Find out your checking rule maintained  in Order Control OPJK for your order type and plant combination for both
    Create(1) and Release purpose.
    Then in t.code OPJJ and for that Checking rule and Checking group combination(Maintain in material Master) go to detail screen and don't activate check box for No Storage location inspection.
    In this case system will check the available stock in Production storage location only.If it is not maintain then system will check at plant level in all storage locations.
    If production storage location is not maintained either in material master or in BOM then maintain it.
    karthick

  • Storage location to be excluded from availability check

    Hi,
    Our requirement is to exclude a storage location for availability check. Certain user exits are listed under programs FV45VFZZ / FV45VFZY / RV03VFZZ. Can any of them be used to block a storage location. If so what is the code to be written.
    Regards,
    KC

    Dear Krishna,
    Go to the transaction OVZ9 - carry out Availability check.
    Select the requirement, Individual/Collective with the checking rule as A or B, where you want to stop the checking of Storage location and double clik.
    Inside there is a tab Storage location inspection - there activate the checkbox.
    Hope this helps.  Reward points if satisfied.
    Thanks and regards.
    Augustine Ponraj.

  • Exclude storage location from Availability check

    Hi,
    We have to exclude 4 storage location out of 46 storage locations from availability check in sales order processing.
    Please advice how to do it.
    We can not use MRP area and MRP Groups to control this because of certain reasons. 
    Regards,
    Avnish

    Please check this..
    spro...material management....consumption based planneng....planning...define storage location MRP...
    Here give plant name and enter...
    Against every storage location you ll have indicators for excluding,including the stock....
    hope this clarifies..
    For material availablity check in production order,
    1. you need to delete the storage loation in OX09 (it is possible If no stock)
    2. Or you need to transfer post the materials to a storage location xxxx which you can name as Blocked storage location...
    F Y I....In OVZ9  you can exclude all the storage locations which is not your reequirement..
    katrthick
    Edited by: karthick PP on Mar 26, 2009 12:40 PM

Maybe you are looking for