Availability checking rule for sales orders

Hi experts,
To meet our useru2019s requirement I have switched off the availability check at the schedule line category level. But when I created a sales order the AVC is still happening. Upon checking I have noticed the availability checking group as u201C02u201D and checking rule as u201CBu201D in sales order. To my understanding the checking rule should be u201CAu201D for all sales orders. Could you please advise as to why it is happening so?

Hi,
I have done as what suggested and I created a new sales order. Upon checking (Sales screen --} environment --} availability) the availability checking group is 02 and checking rule is B. Please note that for the other sales document types we have, the checking group is 02 and checking rule is A

Similar Messages

Availability Checking Rule in Sales Order- Urgent....

Hi Gurus,
I m PP Consultant, I want to know How Checking rule is populated whilr creating Sales Order.
e.g - I am creating sales order for the MTS material then availability checking rule A must be come. & same for MTO I think AE should come.
please revert back soon. Hey Gurus Plz help me out its urgent ticket
thanks & regards, points will be rewarded yaar...
Anant.
Edited by: anant joshi on May 29, 2008 8:17 AM
Edited by: anant joshi on May 29, 2008 11:20 AM

Availibility checking rule populates from the availibilty maitined in your material master.
i.e 01 Daily requirements
     02 Individual requirements
If you go to transaction OVZ9
you will see the assignment of checking rule against 01 & 02.
e.g 01 A SD order
      01 B SD Delivery
      01 AE Make to order Stock
I Think This will clear your doubt.
Reward If useful
Regards
Rasik

Checking Rule for Process Order

Hi Guys
I am using the standard checking rule for Process Order while releasing. This rule considers the quality blocked stock also as available stock and thus release the Process Order.
However the client does not want to include the quality block stock for process order. My question is:
1. If I create a checking rule which does not consider quality stock as available, and attach it to release of Process Order, will it make any change in MRP run?
2. Is there a means to show a warning message while release of process order to show the stock is in quality block state?
3. Is there any other means to alarm or warn the user before release of Process order about the material quality block state?
Appreciate you help / suggestion on this
Thanks in advance
Rahul

Hi,
Regards the stocks during MRP run, you can do it in tow areas
1. In OPPI, you can define whether Stockin transfer/blocked/restricted stocks can be taken into account for MRP run.
2. You can exclude storage locations in MRP run and assign the MRP storage location indicator as 1 in MRP 4 view.
Apart from this the MRP will consider all stocks and requirements.
If you don't want to consider QI stock (for ex) then you can convert them as blocked stocks or you can move to a storage location which is not assigned to the MRP.
Thanks,
JK

Determination of checking Rule in sales order

Dear all,
how the checking rule is determined in sales order av.check, In the t code OPJJ we are maintained so many checking rule for one checking group, In the sales order how the system determines the checking rule,
I am expecting positive feedback from your end .
Best Regards,
Kumar

Hi Kumar,
You will have to maintain the checking group default for Material Type & Plant in Customization.
You can assign the plant & the checking rule for processing Back order Processing.
You can set default values for the relevant sales area & the availability checking rule.
You will have to assign the requirement class to reqirement type.
Maintain the avbl. check & TOR for the relevant schedule line.
These settings need to be done for the avbl. check to be performed at the sales order level.
Hope this will help you.
Thanks & Regards
Krishna Mohan

Changing Availability Checking Group in Sales Order.

Hello Gurus:
We changed the checking group in the material master. The existing sales orders still shows the earlier checking group. So how to change the checking group in existing sales order also (after it is changed in material master). Also, once the checking group in sales order is changed, how to de-commit and re-commit material as per the new checking group. Thanks.
- Chetan

Chetan,
As you have changed Checking Group in MMR later on all ur availability check etc will be calculated as per previous MMR settings..
Still go to OVZ9...See if your sales order has correct Check rule/Group..
Then Go to sales order Carry out availability check again...See if Avalability Overview has changes as per your new Check Rule..
Also Do Some R & D...
Like test with change in quantity of line items...save and carry out avalability check gain..See if schedule line dates in Sales order Is there any change?
See if any change is there...
If not better create new sales order...it will minimise your efforts and will be quicker way..
REWARD IF U FINDS THIS AS USEFUL...
Regds
MM

Customizing Availability Check in the sales order; EXIT_SAPLATPC_001, etc..

Dear All.
Looking for a way to automatically control what's chosen in the sales order Availability Dialog box depending upon certain conditions.
This is the "Rule for transferring the results of the availability check", field TVTA-REVFP.
The default is blank, which lets the user select what they want. Under certain conditions though we do not want to display the dialog box, and just have the system automatically select "A" which is what's available on the requested date.
Mainly I've been trying to find what REVFP translates to in USEREXIT_AVAILABILITY_IN, and EXIT_SAPLATPC_001.
We've reviewing P_ATPCSX-RESMD, in EXIT_SAPLATPC_001. And trying to set it to "A" in debug with no luck.
Possibly this is too late or too early in process, or the wrong field.
Has anyone done anything like this before or have any ideas on how to approach?
Many Thanks!

hey kharthik,
i got the same requirement. hv u got the solution for this ..if so please provide me..
Regds
Satya

Disable Availability Check Based on Sales Order Type

Hi All SD experts,
Usually ( correct me if i'm wrong ) availability check is set via schedule lines item type. Is there any way that I can disable the availability check based solely on Sales Order Type ? Meaning no matter what item category or schedule lines assigned to materials, availability check will still be disable.
Besides setting in schedule lines type, what are others config that might trigger availability check ? MRP settings ? Movement type ?
Any valuable feedback will be great and much appreciated. A big thank you in advance.
Warmest Regards,
Edie

HI EDIE
    In order for the availability check to happen,the following configuration settings are required.
Availability check:
     a) you have to define requirement class & requirement type.
     b) you have to activate at scheduline category level
     c) in deleviry item.cat ,there is availability check off field,,,,, if u dont mention any values here,then system checks for availability.if u mention 'x' here,then system dont check for availability.
    d) you define checking group and checking rule ,these determine how availability check is going to be performed
MRP:
   MRP determines how material is planned,whether it is inhouse production or external procurement.MRP also determines the time taken for the material to become available for ready use.When ever an order is rised,the requirement is passed to MRP through transfer of requirements(TOR), here MRP determines the inhouse production time or external procurement time.
Movement Type: Movement type determines the type of material movement ,whether it is Goods Issue ,,, or ,, Goods Recipt,,,,, stock transfer between two plants etc.Movement type is determined in schedule line category level.
                  Award points if it is useful
                    Prasad.G

Availability check Problem in sales order according MRP sterategy

hi,
We are using strategy 56 for configurable final product and strategy 65
for its variants.Requirement type is "ELV V". According this requirement type,
it is not possible to confirm availability check and then deliver the
sales order. We tried to mark availability check for requirement type ELV V in OVZG Tcode, but the
following error came up: "Check against plan material can only be carried
out w/o avail.check". Is there any setting to handle this problem to work
with strategies 56 and 65? Is it some configuration that we forgot?
Thanks,

Yes, We have maintained planned del. time. and other fields also,
My problem is that, To make assembly of material A we have two component material B and C.
in the sales order of material A, system should check availability of component material B and C.
please help
vikas

Availability check problem in sales order

Hi All,
We have one material which is assembled by using two components (BOM).
During avaiability check in sales order system should check components stock available in Stores.
· If there is sufficient stock of the component materials is available, the availability check should report a fixed number of days to make assembly,
· If there is insufficient stock of the component materials, the availability check should report the longest lead time for the material which is short + fixed number of days to assembly.
Please help
Vikas

Yes, We have maintained planned del. time. and other fields also,
My problem is that, To make assembly of material A we have two component material B and C.
in the sales order of material A, system should check availability of component material B and C.
please help
vikas

How to change Availability check (MTVFP) in sales order

Hi,
is it possible to change the Availability check on an material in an sales order?
Some material have the value KP (no check) of Availability check in table MARC.
If we use this material in sales orders somtimes we want change the Availability check
from KP to 01 (Daily requirements). Is this possible or have i first change the material
before i use it in sales order.
Thanks.
regards, dieter

Its pre-define in material master, how particular will be treated in respective sales organization / Plant /
So its always in material master , you cant change availability check n sales order.
Once order is created, after that checkin group changed in material master, will be effective for future orders only. not effective in existing / old orders.
Regards,
Reazuddin MD

Manually trigger Availability Check in the Sales Order User Exit MV45AFZZ

Hi All,
As per the normal scenario where sales orders are created and the schedule line delivery dates are determined.
Based on some business logic for few customers we need to change the delivery priority and confirmation delivery date.
We are implementing this logic in the user exit MV45AFZZ in the routine USER_EXIT_SAVE_DOCUMENT_PREPARE.
The availability check logic is already implemented by then. Now we have scenarios where the date redetermined by the custom logic is greater than the one determined by the standard availability check done by SAP.
We have changed the values of the field VBEP-EDATU as per our logic but we still have 2 lines in the schedule line data where the requested date is greater than the confirmed date.
This can be tackled if we can redo the Availability Check.
Can someone provide pointers on how can we trigger the availability check manually in the code.
Regards,
Karthik

What was the solution?

Availability Check in CRM Sales Order

Hello,
We have a requirement of carrying out availability check even before entering the quantity in Sales order, meaning the availability of the product should be visible while the product is searched.
Is it possible to achieve the functionality? If yes then how should we achieve this? We are on CRM 6.0.
Appreciate your inputs!!!
Regards,
Chandrakant

Hello.
Did you manage to solve your issue ?
I know it's an old problem but if you could share the solution, it will be very appreciated.
Regards.
Helder.

Urgent : Availability check in CRM sales order using APO system

Hi,
When we create sales order in CRM while entering vendor in the line item alongwith product and quantity, it goes for a Quantity Allocation check in APO system. Is there any standard BADI or User Exit to receive the information from APO to CRM system, so that using that we can provide the error msg in case of order quantity is more than with the allocated quantity.
Thanks in advance.
Kartavya

Hi,
You can use BADI CRM_AV_CHECK_APO_01 for the purpose.
You can make use of any of the 2 methods of this badi:
CHANGE_APO_RESULT_CRM_FORM
CHANGE_APO_RESULT_NATIVE_FORM
kindly reward with points if helpful
sharif.

Checking rule for sales document types

Hi,
Can I change the cheking rule for a sales document type? Where could I change it? or should I build Z table?
Thanks!

7,
Checking rule is hard-coded into standard SAP sales doc maintenance programs. For SOs, it is A or A* (depending on the stock type). For Deliveries, it is B or B*. There is no way to use standard configuration to alter the rule within SD.
Best Regards,
DB49

ATP checking rule for PM order

Hi friends,
How do I check which ATP rule is being used for Plant maintainence order (PM) order. Using Tcode IW41 we create PM order and do the goods movement type 261.
Error: I have an item ABC with quantity 1 and there exists a deliver for this 1 unit. Still, I am able to issue this part to PM order which should not happen.
Please advise .
Sruthi

SPRO->PM and CS->Maintenance and service processing->Maintenance and service orders->Functions and settings for order type->Availabilty check for material, PRTs and capacity

Availability checking rule for sales orders

Similar Messages

Maybe you are looking for