Available Ram not reflecting actual ram available
Using PS CS3 10.0.1 and OS 10.5.3. If I run Activity Monitor it shows I have 7 gigs of available ram (machine has a total of 9). In PS preference > performance it says Available Ram is 3072mb. Why? Would love to assign more ram to PS. Thanks
PS and other apps can only access ~3 GB RAM
i directly
due to 32-bit limitations of the Adobe app; hence 3072 MB max available. Various Macs can provide much more "available RAM," up to 32 GB (less what the OS and concurrent apps are using). Mac OS X does allow apps to receive benefit from up to 8 GB or more of RAM depending on the app, so your installed 9 GB is fully beneficial.
Perhaps Adobe will deign to provide 64-bit support with PSCS5, but they have decided not to do so with PSCS4. Instead we will no doubt receive new bells and whistles that some call
i bloat.
Similar Messages
-
Vendor listed in the batch does not reflect actual supplier.
Hi,
Vendor listed in the batch does not reflect actual supplier.
For some (STO's) it reflects the actual supplier & for some it is replaced by receving vendor.
Regards,
SudakarGreat, that worked, thanks.
Now I have a small problem. I'm dispatching a MOVE event
manually at one point to force a listener to trigger, and it seems
that afterBounds is null. Here's how I'm dispatching the event:
nativeWindow.dispatchEvent(new
NativeWindowBoundsEvent('move'));
While the MOVE listener function is successfully called,
event.afterBounds.x throws a null reference exception.
Is there an easy workaround? -
Imported files not reflecting actual length
I am exporting some screen captures from Camtasia in AVI. One is 17 min long. But when I bring them into premiere cs6 they are only showing up as 3:30. I have done all the user level troubleshooting, but no matter what they are truncated every time. They play fine in media player - even show themselves as being 17 min... i dont get it - help!
Some of these notes are for Premiere Elements, but may help with PPro
Camtasia http://forums.adobe.com/thread/836800
-and Lagarith Codec http://forums.adobe.com/thread/1287577
-and http://forums.adobe.com/thread/775288
-and http://forums.adobe.com/thread/453044
-and http://forums.adobe.com/message/3202148
Techsmith codec http://forums.adobe.com/message/3692768
-and http://forums.adobe.com/thread/1046914?tstart=0 -
CCA - Actual assessment (KSU5) / allocation not reflected in GLFUNCT table
Hi there,
One of my client uses functional area for reporting. Functional area is derived using cost ctr category while posting. When reports are generated, actual assessment / allocation does not reflect in the functional area report.
The amounts shown are same as the original posting. Is there any report which can show functional area values after the assessment (KSU5) / allocation (KSV5)?
I created a report using report painter using the library 0F (GLFUNCT), but the value is before KSU5 / KSV5. Any way to get the amount after KSU5 / KSV5?
Thanks
RGHi,
Functional areas are being deployed for the purpose of Cost of sales accounting in FI area only. The distribution and assessment cycles which are being undertaken in Controlling will not be available in Finance tables. If you need functional area wise report in Controlling, you can run the standard report on the basis of group of cost centers which are assigned to a particular Functional area.
Trust this helps much!
Cheers! -
Free goods not reflecting in PO from Info Record
Hi,
My requirement is , when ever i order 100 qty from a vendor 10 qty should be delivered free of cost.
I am trying to maintain Info record for the same..
Now when i created PO for the same...I entered 100 qty..it is not reflecting 10 qty in another line in PO..
Where i am wrong?
UtsHI,
Have maintained the values in
*Spro-Purchasing-Discount in kind-Define & assign discount in kind schema-Maintain free goods schema*
It will be available in standard SAP if not do the following configuration
Here
Usage -N
Application -M
create procedure NR0001
In control data
step-10
Cond Type-NR00
Then save.
Next
Define free good schema
Here assign ur schema grp of vendor
Then assign the procedure created previously (i-e) NR001 & THEN SAVE.
The above configuration is very important for the free goods scenario to work.
Then go to MM and in purchasing view and give the value 2.
Then in MBN1 create the condition record for the IR -0.
Then create the PO it will work definetly.
9884057038
murugan
Edited by: Murugan mgl on Jun 17, 2009 6:58 AM
Edited by: Murugan mgl on Jun 17, 2009 6:59 AM -
Changes in server side java file not reflecting in Client side java code?
Hi friends,
iam using eclipse IDE, JBoss server, SWING GUI and Oracle DB
( looks like : SWINGGUI (Client) <--> EJB's (serverside) <---oracle )
my problem is , when i make change in server side bean file, that changes are not reflecting in GUI programs.
(for ex: iam adding settr and getter for a field and using that in GUI program. but its not identifying that setter or getter).
please tell me what should i do for every change done to server side program, that should reflect / available to GUI?my problem is , when i make change in server side bean file, that changes are not reflecting in GUI programs.
(for ex: iam adding settr and getter for a field and using that in GUI program. but its not identifying that setter or getter).what do you mean it's not "identifying" the methods?
you have to call those methods you know
are you getting NoSuchMethodError?
please tell me what should i do for every change done to server side program, that should reflect / available to GUI?you haven't posted any code or error messages that might help us debug -
AR Down Payment Invoice Does Not Reflect in BP Master Data...
We have placed a sales order for a BP.
We select payment means and accept the payment
In the background a AP Down Payment Invoice is created
When we view the BP master data - the account ballance window does NOT reflect this "down payment"
If we select the golden arrow at account ballance, uncheck "reconciled transactions" you can see the payment and AP down payment and they clear each other out.
The problem is that when the final invoice is created it is not obvious that a down payment has been received. Even if you are simply working at the BP master data window, it is not obvious that a down payment has been received. I belive our process is correct because If you click the TDP box, the payment is listed and will be applied to the final invoice.
It simply does not alert the user that a payment had been received.
What are we doing wrong?????\
Thank you!
Edited by: Andrew Bleier on Feb 4, 2009 1:27 AMKeith Taylor
You are right this feature is only available in Version 2007A. There account posting happen purely due to the pay SAP has been designed and the configuration of GL Accounts.
To make fundametal change to the core product is very difficult if you explain me your business process exactly as you do, I could think of alternatives.
Please let know.
Suda -
Changes are not reflected in Script output
Hi All,
i am facing a problem in SAPscript.
I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
please help me in this regard.Hi,
Could you plese Check NACE whether your script is confiugring or not.
If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text. -
I have repeatedly imported several psd images into LR 1.3, made changes in the develop mode, and saved metadata to file manually in addition to having the auto write metadata option on in LR and ACR. Any changes I have made in LR are not reflecting in Bridge previews or in ACR or Photoshop. I don't believe I should have to utilize the write to xmp options (even though I have been) since the files in question are psd and the metadata gets written directly into the file. If I delete the photo from LR, and even delete the LR catalog (new user trying to make it work with 1 photo at least before importing all images) and re-import the psd to LR it appears with the changes and can backlog in the history panel to it's original state upon import into LR. I would have to be in LR though to know that anything was altered as the other Adobe programs will not display the changes.
If anyone has any help - I would greatly appreciate it!
Thanks,
Ann
System=
160 GB hard drive
Intel core duo T7500
2 GB Ram
Windows Vista 32 bit
ACR 4.3
LR 1.3
Bridge 2.1.1.9
PS CS3 (updated last week)I don't think the problem lies in the name. LR is after all meant to function as a data base of images and be a companion program to PS - with PS doing the heavy editing lifting. I do understand that PS is a pixel editing file and LR is not. I like the idea of the non-destructive editing that LR has to offer and for a lot of image "developing" I prefer LR's interface to ACR.
In my humble opinion, I just think that the Photoshop family of products should all be able to read the same metadata. If I am starting in LR with a psd file (with layers) and I continue to process the image further in LR and save the metadata - therefore saving the changes - I want to be able to open that same file (not another copy) in ACR, PS, or Bridge and have those changes reflected. The only way to do that currently is to export the file and when you do that you lose the PS layers and the LR history panel or another way around it is you can have edit copies of the same file. If at a later date you wanted to go back and change something, you can't just pull out a layer in PS or undo a history state in LR and with the multiple copies of essentially the same image you end us with any editing history scattered amongst multiple files. I already keep 2-4 (original, psd, jpeg print, jpeg web) files for one image which I think is more than adequate. Which is why I find the current set up so frustrating. For now I have just settled for exporting jpegs so I can see the changes. -
Date Customer Exit in the query is not reflecting in the workbook
Hello.
We have a BI 7.0 Query where we have a restriction for req del date and billing date to show the month of current date - 2.
We have written 2 customer exit variables and we have restricted the same. The query is working well.
For Broadcasting, we have created a workbook for this query and saved it under a role.
The workbook is fine running for the current month., But if the month changes to the next, the workbook is not reflecting the same.
Still only Old dates are available in the workbook.
Please let me know if i am doing any mistakeHi Karthik,
If the customer exit variable is of type i_step = 1, ie if it is a manual entry variable as well, then this will not get updated based on teh month of execution.
Kindly check the article below for info.
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/enterprise-data-warehousing/how%20to%20update%20variable%20values%20in%20broadcast%20settings%20dynamically.pdf
Regards.
Shafi. -
0material master data - attribute updated - not reflected in all providers
Hello,
An attribute of 0material was populated with data. Previously it was blank.
Since 0material is available in the dso's and cubes, the attributes come in as navigational.
I am a bit confused. The DSO which loads to the cube is not reflecting the 0material new attribute when displaying data. The cube which is loaded from the same DSO is reflecting the change to the 0material.
I did not think that data needed to be deleted and reloaded?
The attribute change run is part of the process chain and should update both dso and cube?
Example;
Cube
Cust 1
material abc
new attribute bingo
net value 100
DSO which feeds above cube
no data when selecting the same criteria above?
However, when extracting only material and new material attribute in the dso, the attribute comes up.
I am not sure if I am being clear. Thanks for any help you can provide.
Lyndafigured out the issue - I went back and saw the dso nav attributes were not selected. Should have noticed it sooner.
-
I received a replacement iPad. On my original iPad I had dozens of books and PDF's. I completely backed up my original iPad. The categories of my iBook files transferred but NOT the actual PDF and Books. Please help.
Are the PDFs and ibooks on your computer's iTunes ? If so then you should be able to re-sync them, if not then you can re-download ibooks for free as long as they are still available in the store and you use the same iTunes account as you originally used to buy them : http://support.apple.com/kb/HT2519 . The backup doesn't contain the contents of the ibooks app, so for them to be restored to the device they needed to be in your iTunes library.
-
When manually creating delivery notes, the Actual GI time ?
Hello,
When manually creating delivery notes, the Actual GI time (used for pricing determination) is set to the document creation time (CPU time) but expressed in the UserId's local time zone.
Regards,
NeelHello Ram
Please help me out to solve this issue
When manually creating delivery notes, the Actual GI time (used for pricing determination) is set to the document c
Creation time (CPU time) but expressed in the UserId's local time zone.
The correct Actual GI time should be the CPU time in CST time zone, independant of the user.
The Delivery doc. was created on 04/20/2011 at 11:11:32 UserId's local time zone (CET).
The Actual GI time was set per default to 11:12 based on CET CPU time the expected time is 04:12 CST
Edited by: neeljasani on Apr 27, 2011 5:20 PM -
Changes in the repository not reflected in Catalog UI
Hi Experts,
I am facing issue with respect to above subject,i tried to find a solution in forums but,couldnot find suitable solution.
we are upgraded MDM Catalog from 2.0 to 3.0.
when i create a new field in MDM Console the same is not reflecting in Catalog UI to do OCI mapping.
The same is working in Dev system but,when i tried in QA not able to do OCI Mapping as the new field created is not available.
Please share your views to solve the issue.
Regards
SunilHi Shiv,
Thanks for your reply.Now,we are able to map new field created in MDM in OCI mapping.But,when i login portal and connected catalog i am getting below error because of new field ('MDMSRM_VMI_STATUS') mapped.
However when i remove newfield in OCI,no error when connecting to catalog.
Please advise
Regards
Sunil
Root Cause
The initial exception that caused the request to fail, was:
java.lang.IllegalArgumentException: Field with Code 'MDMSRM_VMI_STATUS' does not exist in the table 'MDMSRM_CATALOG_ITEMS (T1) '
Edited by: PSUNIL on Jan 19, 2012 2:48 PM -
Changes to HTML template not reflected in production
Hi All,
I am facing the following issue.
I have changed an already existing screen(HTML template) and published the service. It is working fine in development environment. This is now transported to production environment and the screen change is not reflected here. We have tried refresing the ITS buffer, but hasnt worked. Any pointers would be of great help.
Thanks,
ShrutiHi Shruti,
did you check the changed template in the productive environment? Did the transport successfully reached the new system?
If the changed template is available please (re)publish the file on the new environment.
Regards,
Sabine
Maybe you are looking for
-
I downloaded a song from iTunes and got an error message. The song shows up in my library but it won't play. It says I need to redownload but the song only says play in the store like I have already purchased it. What do I do?
-
Labview Date to SQL Server DateTime Conversion
I have inherited a database of legacy data (created by Labview software) and I need to import that data into a SQL Server 2000 database. One of the fields I'm importing includes a string of numbers which respresents a datetime field - in the followin
-
Communication channel doesn't show in runtime workbench
Hi, In Integration monitoring Runtime Workbench does not show communication channel list in communication channel monitoring. It shows empty but we have created lot of communication channels. This is problem in XI adapter or any other problem? Please
-
I am trying to login to my bank account at nordea.dk. This website uses somekind of java thing. Chrome cant't load it. Works perfect with Safari. How to make it work in Chrome?
-
Trying to download microsoft remote desktop and it keeps failing
trying to download microsoft remote desktop from the app store and midway through the install, i get a message that app failed to download and to try again from purchases, that also fails.