Azure backup Windows 8.1 error

Since I learned that Azure Backup turned available for Windows 8.1 I have tried to get it to work but I have not succeeded yet. I have followed the instructions but when i try to make a backup I get the 0x1D4C2 error. When looking in the logs I don't see
any clear indications of what went wrong. There are a lot of warnings in the log though, so I have broken out some of them below. Note that there are more stuff happening in between the lines. If it's needed I can publish the whole log.
0A10 167C 01/28 14:21:17.735 71 nativeutils.hpp(42) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.GetValue(pszKey, pT)
0A10 167C 01/28 14:21:17.735 71 replica.cpp(532) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : RegUtils::GetValueFromRegKey( L"Software\\Microsoft\\" L"Windows Azure Backup" L"\Config" L"\CloudBackupProvider", ssRegKeyName.PeekStr(), &dwValue)
0A10 167C 01/28 14:21:17.735 71 nativeutils.hpp(42) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.GetValue(pszKey, pT)
0A10 167C 01/28 14:21:17.735 71 replica.cpp(532) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : RegUtils::GetValueFromRegKey( L"Software\\Microsoft\\" L"Windows Azure Backup" L"\Config" L"\CloudBackupProvider", ssRegKeyName.PeekStr(), &dwValue)
0A10 167C 01/28 14:21:17.735 03 registryutils.cpp(171) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Failed: Unable to get Value HKLM\鉈돁翸\Software\Microsoft\Windows Azure Backup\Config\CloudBackupProvider
0A10 167C 01/28 14:21:17.735 71 dscontext.cpp(932) [000000001C700CB0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : StartUsn_\\?\Volume{34b94470-87aa-4d96-9741-667a7203f311}_FS_1576418199653472395: lVal : RegUtils::GetValue(REG_KEY_DLS_CLOUDBACKUPPOROVIDER_CONFIG, GetUsnRegValueName(L"StartUsn", ssVolumeName).PeekStr(), &registryStartUsn)
0A10 167C 01/28 14:21:17.735 71 nativeutils.hpp(42) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.GetValue(pszKey, pT)
0A10 167C 01/28 14:21:17.735 71 replica.cpp(532) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : RegUtils::GetValueFromRegKey( L"Software\\Microsoft\\" L"Windows Azure Backup" L"\Config" L"\CloudBackupProvider", ssRegKeyName.PeekStr(), &dwValue)
0A10 167C 01/28 14:21:17.735 71 nativeutils.hpp(42) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.GetValue(pszKey, pT)
0A10 167C 01/28 14:21:17.735 71 replica.cpp(532) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : RegUtils::GetValueFromRegKey( L"Software\\Microsoft\\" L"Windows Azure Backup" L"\Config" L"\CloudBackupProvider", ssRegKeyName.PeekStr(), &dwValue)
0A10 167C 01/28 14:21:17.735 03 workitem.cpp(86) [000000001C889DE0] 43C219F4-44AA-4409-ABD2-626263485F7A ACTIVITY Idle Timer created with timeout = 390000
0A10 167C 01/28 14:21:17.735 70 acceptdatasetsubtask.cpp(354) [000000001C9FDAE0] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CAcceptDatasetSubTask::Initialize: Target path - \\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\
0A10 167C 01/28 14:21:17.735 18 dsmreceiversubtaskbase.cpp(39) [000000001CA425A0] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CDsmReceiverSubTaskBase: constructor [000000001CA425A0] openovl[000000001CA42710] msgovl[000000001CA42808] closeovl[000000001CA42760]
0A10 167C 01/28 14:21:17.735 18 dsmreceiversubtaskbase.cpp(39) [000000001CA11310] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CDsmReceiverSubTaskBase: constructor [000000001CA11310] openovl[000000001CA11480] msgovl[000000001CA11578] closeovl[000000001CA114D0]
0A10 167C 01/28 14:21:17.735 18 dsmsendersubtaskbase.cpp(47) [000000001CA67040] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CDsmSenderSubTaskBase: constructor [000000001CA67040] openovl[000000001CA671B0] msgovl[000000001CA672B0] closeovl[000000001CA67200]
0A10 167C 01/28 14:21:17.735 18 writeriterator.cpp(82) [0000000019527740] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CFileWriterIterator:Init(overwrite:0, setarchive:0, setchangetime:1, skiptargetmetadatarestore:0, restoresec:1, recreaterp:1, throttle:0) called
0A10 167C 01/28 14:21:17.735 18 writeriterator.cpp(221) [0000000019527740] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CFileWriterIterator::AddAlternateLocationMapping(filepath:\\?\Volume{34b94470-87aa-4d96-9741-667a7203f311}\, filespec:*, destination:\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\) called
0A10 167C 01/28 14:21:17.735 18 readeriterator.cpp(289) [000000001CA13C10] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CFileReaderIterator::SetFileSystemFlags (0x9) called
0A10 167C 01/28 14:21:17.735 18 iteratorutils.cpp(690) 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CaseSensitivity NOT enabled on the machine
0A10 167C 01/28 14:21:17.735 18 readeriterator.cpp(110) [000000001CA13C10] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CFileReaderIterator:AddIncludeFiles(filepath:\\?\Volume{34b94470-87aa-4d96-9741-667a7203f311}\Users\Andreas\Synk\, filespec:*, snapshotpath:\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\Users\Andreas\Synk\) called
0A10 167C 01/28 14:21:17.735 18 fsutils.cpp(4049) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\Users\Andreas\Synk\
0A10 167C 01/28 14:21:17.735 18 fsutils.cpp(624) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070003] : Failed to get attributes for \\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\Users\Andreas\Synk\
0A10 167C 01/28 14:21:17.735 18 fsutils.cpp(2188) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80990a54] : Source path not found:\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\Users\Andreas\Synk\
0A10 167C 01/28 14:21:17.767 70 nativeutils.hpp(42) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.GetValue(pszKey, pT)
0A10 167C 01/28 14:21:17.767 70 filespeclocalcache.cpp(308) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070003] : Encountered Failure: : lVal : hFile = ::CreateFileW( ssFileName.PeekStr(), (0x80000000L), 0, 0, 3, 0x00000080, 0)
0A10 167C 01/28 14:21:17.767 18 pruningiterator.cpp(479) [000000001CAC9CA0] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CPruningIterator::GetNextFile - File [\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\System Volume Information\FVE2.{09cf57b8-9e6c-43d4-ae1f-0408882a397d}.1] returned for deletion
0A10 1AD8 01/28 14:21:17.767 70 itemcatalogupdater.cpp(259) 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Hr: = [0x00000000] QueryTaskId success!.
0A10 1AD8 01/28 14:21:17.767 70 catalogfailurehandler.cpp(343) [000000001CA53620] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CCatalogFailureHandler :: GetLastFailedEntries, Reading catalog failures in Last Backup..
0A10 1AD8 01/28 14:21:17.767 70 catalogfilehelper.cpp(287) [000000001C8CB610] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Opening file - C:\Program Files\Microsoft Azure Recovery Services Agent\Scratch\CoFLists\CatalogLists\{BD5BA688-EF07-416C-A244-52B95FFF1CCE}_CatalogFailedEntry_B.dat with IsReadOnly = true
0A10 1AD8 01/28 14:21:17.767 70 catalogfailurehandler.cpp(549) [000000001CA53620] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] CCatalogFailureHandler :: OnPreviousErrorUploadFinished failed to delete old records file
0A10 1AD8 01/28 14:21:17.767 70 catalogfailurehandler.cpp(550) [000000001CA53620] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
0A10 1AD8 01/28 14:21:17.767 70 itemcatalogupdater.cpp(1044) [000000001C890890] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Hr: = [0x00000000] SetCatalogFailureHelper::UploadPreviousFailures : Completed.
0A10 1AD8 01/28 14:21:17.767 70 itemcatalogupdater.cpp(566) 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Uploading 1 RO entries
0A10 1AD8 01/28 14:21:17.767 79 WcfClient.cs(944) 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Executing web service call | Params: {ServiceInterface = Microsoft.Internal.CloudBackup.Common.FileCatalog.Interface.IFileCatalogExternalChannel}{Description = UpdateROArgs}{TargetEndpoint = https://pod01-fc1.ne.backup.windowsazure.com/FileCatalogExternalService.svc}
0A10 1AD8 01/28 14:21:17.767 69 CBEngineWcfClientHelper.cs(320) 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Setting RequestId header for outgoing request | Params: {RequestId = 8dcfb39f-3022-4d3a-b73f-b11e290758e0}{WorkitemId = 5b81881f-7d02-47b0-bb1a-a266bfec2522}{TaskId = 43c219f4-44aa-4409-abd2-626263485f7a}{AgentVersion = 2.0.8694.0}
0A10 167C 01/28 14:21:17.767 18 fswrapper.cpp(932) [000000001DC1E310] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Parameter: [0x80070020], FilePath = \\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\System Volume Information\FVE2.{09cf57b8-9e6c-43d4-ae1f-0408882a397d}.1
0A10 167C 01/28 14:21:17.767 18 fswrapper.cpp(932) [000000001DC1E310] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] : CreateFile failed \\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\System Volume Information\FVE2.{09cf57b8-9e6c-43d4-ae1f-0408882a397d}.1 with error :32
0A10 167C 01/28 14:21:17.767 70 onlinesubtask.cpp(496) [000000001C9FDAE0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] COnlineSubTask::UpdateStatus => hr
0A10 167C 01/28 14:21:17.767 71 dscontext.cpp(152) [000000001C700CB0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Last completed state for Ds Id (1576418199653472395) is 18
0A10 167C 01/28 14:21:17.767 71 dscontext.cpp(158) [000000001C700CB0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Ds Id (1576418199653472395) failed. DLS: 0 HRESULT: 0x80070020
0A10 167C 01/28 14:21:17.767 71 replicator.cpp(315) [000000001C840BA0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] SetupReplicationForReplica unsuccessful for replica id ({BD5BA688-EF07-416C-A244-52B95FFF1CCE}) Volume (\\?\Volume{34b94470-87aa-4d96-9741-667a7203f311}\))
0A10 167C 01/28 14:21:18.188 71 backupasync.cpp(1045) [000000001C8B2730] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] Backup Progress: Failed
0A10 167C 01/28 14:21:18.548 22 vdshelper.cpp(923) [000000001A7F6600] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80990fb0] Disk [\\?\PHYSICALDRIVE2] is not found as unknown
0A10 167C 01/28 14:21:18.595 03 dynamicloadedmodule.cpp(91) [000000001DC1F230] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x8007007e] : Failed to load DLL [C:\windows\system32\WSBOnline.dll]
0A10 167C 01/28 14:21:18.595 79 bpbackupstoreutils.cpp(417) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Snap-In Updation skipped because dll not loaded
0A10 167C 01/28 14:21:18.595 79 bpbackupstoreutils.cpp(157) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Snap-In Updation Skipped because WSBOnline.dll was not found.
0A10 167C 01/28 14:21:18.595 79 bpbackupstoreutils.cpp(390) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Error trying to add regkey for completion success ignoring
I have tried to completely re-install the agent and remove the vault in Azure.

Hi,
This is a known issue under investigation.  Azure agent is not able to prune bitlocker file during backup.
DC1E310] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Parameter: [0x80070020], FilePath =
\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\System Volume Information\FVE2.{09cf57b8-9e6c-43d4-ae1f-0408882a397d}.1
0A10 167C 01/28 14:21:17.767 18 fswrapper.cpp(932) [000000001DC1E310] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] : CreateFile failed
\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\System Volume Information\FVE2.{09cf57b8-9e6c-43d4-ae1f-0408882a397d}.1 with error :32
0A10 167C 01/28 14:21:17.767 70 onlinesubtask.cpp(496) [000000001C9FDAE0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] COnlineSubTask::UpdateStatus => hr
0A10 167C 01/28 14:21:17.767 71 dscontext.cpp(152) [000000001C700CB0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Last completed state for Ds Id (1576418199653472395) is 18
0A10 167C 01/28 14:21:17.767 71 dscontext.cpp(158) [000000001C700CB0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Ds Id (1576418199653472395) failed. DLS: 0 HRESULT: 0x80070020
Where ErrorCode: 0x80070020 (-2147024864): The process cannot access the file because it is being used by another process.
No ETA on a fix at this time.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

  • HELP!!! NEED tutiorials for backup windows 7 after error code 0x8078015B

    Please help I need a tutorial to backup windows 7 64bit after error code 0x8078015B.

    Is this over the network? If yes, then try these steps :
    1. Click Start. Enter “gpedit.msc” in the Start Search box. 
    2. Locate to Computer Configuration\Windows Settings\Security Settings\Local Policies\Security
    Options\
    3. In the right pane, double-click on “Network security: LAN Manager authentication level”.
    4. Change the level to “Send LM & NTLM - use NTLMv2 session security if negotiated”.
    Please check if the share folder can be accessed with UNC “\\computername\folder
    or \\IPAddress\folder”.
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Azure Backup no longer working OBEngine issues?

    I have a problem with the Vault backup since a while now (started around 22-10). The snap in reports the following error when I try to run a job manually:
    "Error details: The Microsoft Azure Recovery Services Agent cannot connect to the OBEngine service. Verify that the OBEngine service is present in the Services Control Panel and that the port 6049 is available."
    I read a few articles online and I noticed something has changed regarding the connection method between the server and the vault. I downloaded and installed the newest Azure client 2.0.8694.0 and downloaded a Vault Credential file. When I do the ‘register
    server’ I receive an error at the end stating:
    "Failed to set the encryption key for secure backups. The encryption passphrase provided does not match with passphrase associated with the following server: Server.Domain.local Ensure that the encryption passphrase is configured properly."
    And I am still receiving the first error when I try to manually start a back-up job. I have also deinstalled the Azure client and installed it again. I have turned off the firewall and virus scanner. I checked if the service was running, it is. I also rebooted
    the server. Is there anyone who can help me out? It did work fine before it just got ‘broken’ somewhere along the line.

    The installation steps are understandable and I’ve followed all steps you basically described … couple of times…and I end up with the same error message: “Following error occurred during Microsoft Azure Backup SnapIn operation. 
    Error details: The Microsoft Azure Recovery Services Agent cannot connect to the OBEngine service. Verify that the OBEngine service is present in the Services Control Panel and that the port 6049 is available."
    The Microsoft Azure Recovery Services Agent (obengine) service is up and running (Started/Manual).
    When Microsoft Azure Recovery Services Agent SnapIn is closed and reopened the same message appears in the SnapIn window immediately after opening.
    Yesterday I created new backup vault, downloaded and installed Agent, registered server with new credentials, scheduled backup, clicked backup now and …oops same error message…thus
    looking for ideas.
    Rob

  • Azure Backup CATALOG FAILURE 0x80131500 on Windows 8.1 Pro

    I recently installed the new Azure Backup client on a Windows 8.1 Pro computer to test the service. Every backup that is run is resulting in hundreds of skipped files showing the same error: 
    CATALOG FAILURE 0x80131500 
    A random check of some of the files with this error revealed that some are backed up and available for restore whereas others do not appear to be available for restore. Further testing showed that the files that are available for restore can be restored. 

    Hi,
    The error "CATALOG FAILURE 0x80131500" was mentioned a lot in these several days.
    Personally I tested to perform a backup on a Windows 2012 R2 system with Agent version 2.0.8692.0 and it finished successfully. But we still reported this issue to product team and they are working on it now. If there is any update I will post back quickly. 
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Azure Backup fails on Windows 8.1

    Hi,
    I was hoping to use our windows azure account to make cloud backup of some of our PC's, they're all running Windows 7, 8 or 8.1.
    I read that now azure backup support windows 7, 8 and 8.1 : https://support.microsoft.com/kb/3015072?wa=wsignin1.0 
    So I installed this updated package, configured a backup and tried to run it but I can't have it works it always fails: 0x1d4c2 error. I looked into the log and here is the first error that appear on the log
    0B00 1EF0
    01/07 00:51:33.622
    70 nativeutils.hpp(41)
    170BDAAE-9565-4632-84BA-A48F18F64C81
    WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.Open((( HKEY ) (ULONG_PTR)((LONG)0x80000002) ), pszPath)
    0B00 2130
    01/07 00:51:33.672
    03 miscellaneousutils.cpp(692)
    170BDAAE-9565-4632-84BA-A48F18F64C81
    NORMAL Hr: = [0x80070002] Could not get the value of registry key name CopyBackupEnabled under HKEY_LOCAL_MACHINE\Software\Microsoft\Windows Azure Backup 
    Hope someone can help me figured it out ....
    Thank you!
    Chris

    Ok, I reinstall the app and now the last faillure I have is:
    2140 28A8
    01/09 21:02:14.816
    71 async.cpp(948)
    8DD85B67-49E3-4729-AB44-B682F81E7E94
    FATAL Hr: = [0x80070020] DoAsync operation failed.
    I tried on another machine running Windows 8.1 and it's not working either. I'm now going to trying on Windows 7 machine.
    Thanks for any help
    Chris

  • Azure Backup fails with error 0x003E6 after data transmission (Protection Agent Failure)

    On a Windows Essentials 2012 Server (German) I had Azure Backup up and running for several months.
    (Probably) After adding features to support Remote Access, Azure Backup stopped working.
    The backup schedule executes and transfers all data, than it constantly fails with the error:
    "Fehler beim Vorgang aufgrund eines Schutz-Agent-Fehlers. Wiederholen Sie den Vorgang (0x003E6)" which translates to the english "The operation failed because of a protection agent failure. Retry the operation (0x003E6)".
    An update of the Backup Agent to the latest version did not resolve the issue.
    Does anybody know details about this error and the reason behind it?
    Regards,
    Dominik

    Hi Dominik,
    First please check if there is any new policy was set such as a throttle for uploading data, or a firewall was enabled before the issue occurs. 
    There is no enough information for finding out the exact cause. Please also check if there is any error and event logs. These can be found in the Application Event log under WindowsAzureBackup.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows Azure Backup fails OBEngine service

    Backups were running fine on my VM for months, until 11/19/2014.
    Since this date, backups have been failing due to an AccessViolationException KeyManager.dll which causes cbengine.exe to crash.
    Here is the detail from the eventlog:
    Fault bucket , type 0
    Event Name: APPCRASH
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: cbengine.exe
    P2: 2.0.8692.0
    P3: 542552af
    P4: KeyManager.dll
    P5: 2.0.8692.0
    P6: 542553a5
    P7: c0000005
    P8: 0000000000008116
    P9: 
    P10: 
    Analysis symbol: 
    Rechecking for solution: 0
    Report Id: 7aa85bb1-7675-11e4-9416-00155de01aa3
    Report Status: 4
    Hashed bucket: 
    Here is the output from AppCrash_cbengine.exe_2876308b4d338fde9c352031c1e675e0c83996f2_06a1493e:
    Version=1
    EventType=APPCRASH
    EventTime=130615943683897742
    ReportType=2
    Consent=1
    UploadTime=130615943694678792
    ReportIdentifier=7aa85bb2-7675-11e4-9416-00155de01aa3
    IntegratorReportIdentifier=7aa85bb1-7675-11e4-9416-00155de01aa3
    NsAppName=cbengine.exe
    Response.type=4
    Sig[0].Name=Application Name
    Sig[0].Value=cbengine.exe
    Sig[1].Name=Application Version
    Sig[1].Value=2.0.8692.0
    Sig[2].Name=Application Timestamp
    Sig[2].Value=542552af
    Sig[3].Name=Fault Module Name
    Sig[3].Value=KeyManager.dll
    Sig[4].Name=Fault Module Version
    Sig[4].Value=2.0.8692.0
    Sig[5].Name=Fault Module Timestamp
    Sig[5].Value=542553a5
    Sig[6].Name=Exception Code
    Sig[6].Value=c0000005
    Sig[7].Name=Exception Offset
    Sig[7].Value=0000000000008116
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.2.9200.2.0.0.400.8
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=1033
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=9fac
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=9fac4e2867de2c0bc14632ff7179424b
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=aa27
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=aa2726ad3eea6d54361060a11351616d
    UI[2]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cbengine.exe
    UI[5]=Check online for a solution (recommended)
    UI[6]=Check for a solution later (recommended)
    UI[7]=Close
    UI[8]=cbengine.exe stopped working and was closed
    UI[9]=A problem caused the application to stop working correctly. Windows will notify you if a solution is available.
    UI[10]=&Close
    LoadedModule[0]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cbengine.exe
    LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
    LoadedModule[2]=C:\Windows\SYSTEM32\MSCOREE.DLL
    LoadedModule[3]=C:\Windows\system32\KERNEL32.dll
    LoadedModule[4]=C:\Windows\system32\KERNELBASE.dll
    LoadedModule[5]=C:\Windows\system32\ADVAPI32.dll
    LoadedModule[6]=C:\Windows\system32\msvcrt.dll
    LoadedModule[7]=C:\Windows\SYSTEM32\sechost.dll
    LoadedModule[8]=C:\Windows\system32\RPCRT4.dll
    LoadedModule[9]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscoreei.dll
    LoadedModule[10]=C:\Windows\system32\SHLWAPI.dll
    LoadedModule[11]=C:\Windows\system32\USER32.dll
    LoadedModule[12]=C:\Windows\system32\GDI32.dll
    LoadedModule[13]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
    LoadedModule[14]=C:\Windows\SYSTEM32\MSVCR110_CLR0400.dll
    LoadedModule[15]=C:\Windows\assembly\NativeImages_v4.0.30319_64\mscorlib\51fbf5aac9c6f1aef14557276f98ad28\mscorlib.ni.dll
    LoadedModule[16]=C:\Windows\system32\ole32.dll
    LoadedModule[17]=C:\Windows\SYSTEM32\combase.dll
    LoadedModule[18]=C:\Windows\SYSTEM32\CRYPTBASE.dll
    LoadedModule[19]=C:\Windows\SYSTEM32\bcryptPrimitives.dll
    LoadedModule[20]=C:\Windows\SYSTEM32\CRYPTSP.dll
    LoadedModule[21]=C:\Windows\system32\rsaenh.dll
    LoadedModule[22]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clrjit.dll
    LoadedModule[23]=C:\Windows\system32\OLEAUT32.dll
    LoadedModule[24]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System\882c88d14efa17e32acc1953755e8709\System.ni.dll
    LoadedModule[25]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Serv759bfb78#\270d01dd5380f28bb384df1187f47532\System.ServiceProcess.ni.dll
    LoadedModule[26]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudSharedInfra.dll
    LoadedModule[27]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudEngineTracing.dll
    LoadedModule[28]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\TraceWrapper.dll
    LoadedModule[29]=C:\Windows\SYSTEM32\MSVCR110.dll
    LoadedModule[30]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\TraceProvider.dll
    LoadedModule[31]=C:\Windows\SYSTEM32\MSVCP110.dll
    LoadedModule[32]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\LKRhDPM.DLL
    LoadedModule[33]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudEngineFM.dll
    LoadedModule[34]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudCommonFM.dll
    LoadedModule[35]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\FailureModeling.dll
    LoadedModule[36]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\ErrorCodeUtils.dll
    LoadedModule[37]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudProxyHelper.dll
    LoadedModule[38]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Core\58a5753c80817773be7d569bc2d6ba92\System.Core.ni.dll
    LoadedModule[39]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.ServiceModel\b96ac95b283e1ae9e6dc2a4396bc9c1a\System.ServiceModel.ni.dll
    LoadedModule[40]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Xml\7ae460b2b5c41359e80ed3c95660dbf6\System.Xml.ni.dll
    LoadedModule[41]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Configuration\132c056670c4a6ad010e87ff53e6b05e\System.Configuration.ni.dll
    LoadedModule[42]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Runteb92aa12#\dc798870570147bc073d2f0773c8d02e\System.Runtime.Serialization.ni.dll
    LoadedModule[43]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudCommonInterface.dll
    LoadedModule[44]=C:\Windows\system32\urlmon.dll
    LoadedModule[45]=C:\Windows\system32\iertutil.dll
    LoadedModule[46]=C:\Windows\system32\WININET.dll
    LoadedModule[47]=C:\Windows\system32\USERENV.dll
    LoadedModule[48]=C:\Windows\system32\profapi.dll
    LoadedModule[49]=C:\Windows\SYSTEM32\Secur32.dll
    LoadedModule[50]=C:\Windows\SYSTEM32\SSPICLI.DLL
    LoadedModule[51]=C:\Windows\system32\SHELL32.dll
    LoadedModule[52]=C:\Windows\SYSTEM32\SHCORE.dll
    LoadedModule[53]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CBEngineService.dll
    LoadedModule[54]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\NativeMethods.dll
    LoadedModule[55]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CBEngineServiceModuleHelper.dll
    LoadedModule[56]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\NativeUtils.dll
    LoadedModule[57]=C:\Windows\SYSTEM32\NETAPI32.dll
    LoadedModule[58]=C:\Windows\SYSTEM32\ACTIVEDS.dll
    LoadedModule[59]=C:\Windows\SYSTEM32\msi.dll
    LoadedModule[60]=C:\Windows\system32\CRYPT32.dll
    LoadedModule[61]=C:\Windows\SYSTEM32\netutils.dll
    LoadedModule[62]=C:\Windows\SYSTEM32\srvcli.dll
    LoadedModule[63]=C:\Windows\SYSTEM32\wkscli.dll
    LoadedModule[64]=C:\Windows\SYSTEM32\adsldpc.dll
    LoadedModule[65]=C:\Windows\system32\MSASN1.dll
    LoadedModule[66]=C:\Windows\system32\WLDAP32.dll
    LoadedModule[67]=C:\Windows\SYSTEM32\DSROLE.DLL
    LoadedModule[68]=C:\Windows\SYSTEM32\SAMCLI.DLL
    LoadedModule[69]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudBackupProvider.dll
    LoadedModule[70]=C:\Windows\SYSTEM32\wer.dll
    LoadedModule[71]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\VssRequestor.dll
    LoadedModule[72]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\NativeEtwTracer.dll
    LoadedModule[73]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\iRefCounted.dll
    LoadedModule[74]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cbeventpub.dll
    LoadedModule[75]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\KeyManager.dll
    LoadedModule[76]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\ClientStamp.dll
    LoadedModule[77]=C:\Windows\SYSTEM32\VSSAPI.DLL
    LoadedModule[78]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\ClusterInquiry.dll
    LoadedModule[79]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CsvManager.dll
    LoadedModule[80]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\DsmFs.dll
    LoadedModule[81]=C:\Windows\SYSTEM32\VssTrace.DLL
    LoadedModule[82]=C:\Windows\system32\WS2_32.dll
    LoadedModule[83]=C:\Windows\SYSTEM32\CLUSAPI.dll
    LoadedModule[84]=C:\Windows\SYSTEM32\RESUTILS.dll
    LoadedModule[85]=C:\Windows\SYSTEM32\sisbkup.dll
    LoadedModule[86]=C:\Windows\system32\NSI.dll
    LoadedModule[87]=C:\Windows\SYSTEM32\cryptdll.dll
    LoadedModule[88]=C:\Windows\SYSTEM32\clbcatq.dll
    LoadedModule[89]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\HVRAzureReplicationProvider.dll
    LoadedModule[90]=C:\Windows\SYSTEM32\ncrypt.dll
    LoadedModule[91]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\SalDmHelper.dll
    LoadedModule[92]=C:\Windows\SYSTEM32\VirtDisk.dll
    LoadedModule[93]=C:\Windows\SYSTEM32\bcrypt.dll
    LoadedModule[94]=C:\Windows\SYSTEM32\NTASN1.dll
    LoadedModule[95]=C:\Windows\SYSTEM32\FLTLIB.DLL
    LoadedModule[96]=C:\Windows\SYSTEM32\pcwum.DLL
    LoadedModule[97]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudUtils.dll
    LoadedModule[98]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\WatsonIntegrator.dll
    LoadedModule[99]=C:\Windows\assembly\NativeImages_v4.0.30319_64\SMDiagnostics\f78732604518fdac525c23d94053c4bc\SMDiagnostics.ni.dll
    LoadedModule[100]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CBObjectModel.dll
    LoadedModule[101]=C:\Windows\system32\mswsock.dll
    LoadedModule[102]=C:\Windows\SYSTEM32\DNSAPI.dll
    LoadedModule[103]=C:\Windows\System32\rasadhlp.dll
    LoadedModule[104]=C:\Windows\System32\fwpuclnt.dll
    LoadedModule[105]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Servd1dec626#\10619c5fe8292214fbfcef53958f2e7b\System.ServiceModel.Internals.ni.dll
    LoadedModule[106]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.IdentityModel\c7724d34814b7ef413f572c47b555414\System.IdentityModel.ni.dll
    LoadedModule[107]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\ROCatalogInterface.dll
    LoadedModule[108]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CatalogCommon.dll
    LoadedModule[109]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CBEngineProxy.dll
    LoadedModule[110]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\FileCatalogInterface.dll
    LoadedModule[111]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\AccessControlHelper.dll
    LoadedModule[112]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\IdMgmtInterface.dll
    LoadedModule[113]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\SettingsInterface.dll
    LoadedModule[114]=C:\Windows\SYSTEM32\IPHLPAPI.DLL
    LoadedModule[115]=C:\Windows\SYSTEM32\WINNSI.DLL
    LoadedModule[116]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Transactions\ae60768684128a7def00a60d3ad1f7aa\System.Transactions.ni.dll
    LoadedModule[117]=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
    LoadedModule[118]=C:\Windows\system32\msv1_0.DLL
    LoadedModule[119]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CalExternalProxy.dll
    LoadedModule[120]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\IdMgmtProxy.dll
    LoadedModule[121]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\SamlTokenBuilderV2.dll
    LoadedModule[122]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Security\4fd85de092b46b92d150158442b90446\System.Security.ni.dll
    LoadedModule[123]=C:\Windows\SYSTEM32\DPAPI.dll
    LoadedModule[124]=C:\Windows\SYSTEM32\rasapi32.dll
    LoadedModule[125]=C:\Windows\SYSTEM32\rasman.dll
    LoadedModule[126]=C:\Windows\SYSTEM32\rtutils.dll
    LoadedModule[127]=C:\Windows\SYSTEM32\winhttp.dll
    LoadedModule[128]=C:\Windows\SYSTEM32\dhcpcsvc6.DLL
    LoadedModule[129]=C:\Windows\SYSTEM32\dhcpcsvc.DLL
    LoadedModule[130]=C:\Windows\system32\schannel.DLL
    LoadedModule[131]=C:\Windows\system32\ncryptsslp.dll
    LoadedModule[132]=C:\Windows\SYSTEM32\gpapi.dll
    LoadedModule[133]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Web\935caa50c55938e31a53b7e7504cf65c\System.Web.ni.dll
    LoadedModule[134]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Web.28b9ef5a#\ae9e6b5057cc86d9c4696c970b21f642\System.Web.Extensions.ni.dll
    LoadedModule[135]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\ReliableWcfClient.dll
    LoadedModule[136]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\AsyncInterface.dll
    LoadedModule[137]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\IdMgmtCatalogInterface.dll
    LoadedModule[138]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine4.dll
    LoadedModule[139]=C:\Windows\SYSTEM32\MSVCR120_CLR0400.dll
    LoadedModule[140]=C:\Windows\system32\PSAPI.DLL
    LoadedModule[141]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Servf73e6522#\b2c4ffc928f332550008d48592fef264\System.ServiceModel.Web.ni.dll
    LoadedModule[142]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Net.Http\1b58706b8e3775c745148cce6b10b3a9\System.Net.Http.ni.dll
    LoadedModule[143]=C:\Windows\SYSTEM32\wevtapi.dll
    LoadedModule[144]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\Interop.TaskScheduler.dll
    LoadedModule[145]=C:\Windows\System32\taskschd.dll
    LoadedModule[146]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cb_ps.dll
    LoadedModule[147]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\SettingsController.dll
    LoadedModule[148]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\SettingsImpl.dll
    LoadedModule[149]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Management\c5f5f8d6fb4bcd57658a8572e9209a5a\System.Management.ni.dll
    LoadedModule[150]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\wminet_utils.dll
    LoadedModule[151]=C:\Windows\system32\wbem\wmiutils.dll
    LoadedModule[152]=C:\Windows\SYSTEM32\wbemcomn.dll
    LoadedModule[153]=C:\Windows\system32\wbem\wbemprox.dll
    LoadedModule[154]=C:\Windows\system32\wbem\wbemsvc.dll
    LoadedModule[155]=C:\Windows\system32\wbem\fastprox.dll
    LoadedModule[156]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CalExternalUnmanagedProxy.DLL
    LoadedModule[157]=C:\Windows\System32\msxml6.dll
    LoadedModule[158]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\IDContextStoreUnmanagedProxy.DLL
    LoadedModule[159]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\IDContextStore.dll
    LoadedModule[160]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\HvrTelemetryHelper.dll
    LoadedModule[161]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\EtwTraceWrapper.dll
    LoadedModule[162]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\PrepUnmanagedProxy.DLL
    LoadedModule[163]=C:\Windows\SYSTEM32\VERSION.dll
    LoadedModule[164]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\diasymreader.dll
    LoadedModule[165]=C:\Windows\SYSTEM32\ntmarta.dll
    FriendlyEventName=Stopped working
    ConsentKey=APPCRASH
    AppName=cbengine.exe
    AppPath=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cbengine.exe
    NsPartner=windows
    NsGroup=windows8
    Here is the callstack:
    Application: cbengine.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.AccessViolationException
    Stack:
       at Microsoft.SnapIns.CloudBackup.UI.Proxy.JobProviderProxy.BackupAdhoc(Microsoft.SnapIns.CloudBackup.UI.Proxy.BPTemplateSettings, System.String, System.Guid)
       at Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBJob+<>c__DisplayClass1.<StartBackup>b__0()
       at Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBJob.TriggerJobWithConcurrencyCheck(System.Action)
       at Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBPolicy.StartBackup(System.Guid)
       at Microsoft.Internal.CloudBackup.Engine.CBEngine+<>c__DisplayClass3c.<StartCBBackup>b__3b()
       at Microsoft.Internal.Common.FailureModeling.FMComponent`3[[Microsoft.Internal.CloudBackup.Common.Diag.DiagComponents+Id, CloudSharedInfra, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35],[Microsoft.Internal.CloudBackup.Common.FailureModeling.CloudFMConstants+OperationId,
    CloudCommonFM, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35],[Microsoft.Internal.CloudBackup.Common.Utils.Errors.ErrorCode, ErrorCodeUtils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]._FMBlock(System.String,
    Int32, FMBlockArgs<Id,OperationId,Microsoft.Internal.CloudBackup.Common.Utils.Errors.ErrorCode>, System.Action, System.Action)
       at Microsoft.Internal.CloudBackup.Engine.CBEngineHelper.CallOMFunction(System.Action)
       at Microsoft.Internal.CloudBackup.Engine.CBEngine.StartCBBackup(Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBPolicy, Boolean, Boolean)
       at DynamicClass.SyncInvokeStartCBBackup(System.Object, System.Object[], System.Object[])
       at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(System.Object, System.Object[], System.Object[] ByRef)
       at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(System.ServiceModel.Dispatcher.MessageRpc ByRef)
       at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(System.ServiceModel.Dispatcher.MessageRpc ByRef)
       at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(System.ServiceModel.Dispatcher.MessageRpc ByRef)
       at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean)
       at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(System.ServiceModel.Channels.RequestContext, Boolean, System.ServiceModel.OperationContext)
       at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(System.ServiceModel.Channels.RequestContext, System.ServiceModel.OperationContext)
       at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(System.IAsyncResult)
       at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
       at System.Runtime.AsyncResult.Complete(Boolean)
       at System.ServiceModel.Channels.TransportDuplexSessionChannel+TryReceiveAsyncResult.OnReceive(System.IAsyncResult)
       at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
       at System.Runtime.AsyncResult.Complete(Boolean)
       at System.ServiceModel.Channels.SynchronizedMessageSource+ReceiveAsyncResult.OnReceiveComplete(System.Object)
       at System.ServiceModel.Channels.SessionConnectionReader.OnAsyncReadComplete(System.Object)
       at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
       at System.Net.LazyAsyncResult.Complete(IntPtr)
       at System.Net.Security.NegotiateStream.ProcessFrameBody(Int32, Byte[], Int32, Int32, System.Net.AsyncProtocolRequest)
       at System.Net.Security.NegotiateStream.ReadCallback(System.Net.AsyncProtocolRequest)
       at System.Net.FixedSizeReader.CheckCompletionBeforeNextRead(Int32)
       at System.Net.FixedSizeReader.ReadCallback(System.IAsyncResult)
       at System.Runtime.AsyncResult.Complete(Boolean)
       at System.ServiceModel.Channels.ConnectionStream+IOAsyncResult.OnAsyncIOComplete(System.Object)
       at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(System.Object, System.Net.Sockets.SocketAsyncEventArgs)
       at System.Net.Sockets.SocketAsyncEventArgs.FinishOperationSuccess(System.Net.Sockets.SocketError, Int32, System.Net.Sockets.SocketFlags)
       at System.Net.Sockets.SocketAsyncEventArgs.CompletionPortCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
       at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
    Can anyone point me in the right direction?
    I am unaware of any changes to the VM apart from the usual windows updates.
    Kind regards,
    Jay

    Hi,
    If the issue is more about Windows Azure backup, i think you may ask in:
    https://social.msdn.microsoft.com/forums/azure/en-US/home?forum=windowsazureonlinebackup
    Regards.
    Vivian Wang

  • Error message 100010 when trying to specify items for Azure backup

    Running Windows Server 2012 Essentials R2 and am trying to set up Azure backup.  When I try and schedule I can't select items to include/exclude and get the error message above.  When I try an backup the whole drive it jus hangs and doesn't complete.
     Any help appreciated.

    Hi Manu
    Have found an error message that was generated when the backup completed. It's pasted below. I've removed the link in "Event xmlns" to be able to post it here.
    Cheers
    Log Name:      CloudBackup
    Source:        CloudBackup
    Date:          20/04/2015 14:39:05
    Event ID:      11
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      SAMANDAMELIE.LITTLEACTIVEKID.local
    Description:
    The backup operation has completed with errors.
    Event Xml:
    <Event xmlns="">
      <System>
        <Provider Name="CloudBackup" Guid="{ABB3D988-13D1-4D34-808E-E53A2A84D97F}" />
        <EventID>11</EventID>
        <Version>1</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>1</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2015-04-20T13:39:05.400933000Z" />
        <EventRecordID>8</EventRecordID>
        <Correlation />
        <Execution ProcessID="4644" ThreadID="9476" />
        <Channel>CloudBackup</Channel>
        <Computer>SAMANDAMELIE.LITTLEACTIVEKID.local</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="StopInfo">&lt;?xml version="1.0"?&gt;
    &lt;CBJob&gt;&lt;JobId&gt;c003e5af-2586-449c-b28b-6fc467340a65&lt;/JobId&gt;&lt;JobType&gt;Backup&lt;/JobType&gt;&lt;JobStatus&gt;&lt;JobState&gt;Aborted&lt;/JobState&gt;&lt;StartFileTime&gt;130737708679236560&lt;/StartFileTime&gt;&lt;EndFileTime&gt;130740107447602417&lt;/EndFileTime&gt;&lt;FailedFileLog&gt;&lt;/FailedFileLog&gt;&lt;ErrorInfo&gt;&lt;ErrorCode&gt;1073841861&lt;/ErrorCode&gt;&lt;DetailedErrorCode&gt;-2139619278&lt;/DetailedErrorCode&gt;&lt;ErrorParamList&gt;&lt;CBErrorParam&gt;&lt;Name&gt;DLS_ERROR_CODE_NAME&lt;/Name&gt;&lt;Value&gt;1073841861&lt;/Value&gt;&lt;/CBErrorParam&gt;&lt;/ErrorParamList&gt;&lt;/ErrorInfo&gt;&lt;DatasourceStatus&gt;&lt;CBDatasourceStatus&gt;&lt;JobState&gt;Aborted&lt;/JobState&gt;&lt;LastCompletedJobState&gt;TransferringData&lt;/LastCompletedJobState&gt;&lt;ErrorInfo&gt;&lt;ErrorCode&gt;1073841861&lt;/ErrorCode&gt;&lt;DetailedErrorCode&gt;-2137453999&lt;/DetailedErrorCode&gt;&lt;ErrorParamList&gt;&lt;CBErrorParam&gt;&lt;Name&gt;DLS_ERROR_CODE_NAME&lt;/Name&gt;&lt;Value&gt;1073841861&lt;/Value&gt;&lt;/CBErrorParam&gt;&lt;/ErrorParamList&gt;&lt;/ErrorInfo&gt;&lt;Datasource&gt;&lt;DataSourceId&gt;1801615773400769493&lt;/DataSourceId&gt;&lt;DataSourceName&gt;C:\&lt;/DataSourceName&gt;&lt;/Datasource&gt;&lt;ByteProgress&gt;&lt;Total&gt;27052933120&lt;/Total&gt;&lt;Changed&gt;27181924352&lt;/Changed&gt;&lt;Progress&gt;23019032576&lt;/Progress&gt;&lt;Failed&gt;0&lt;/Failed&gt;&lt;/ByteProgress&gt;&lt;FileProgress&gt;&lt;CurrentFile&gt;&lt;/CurrentFile&gt;&lt;Total&gt;76021&lt;/Total&gt;&lt;Changed&gt;947&lt;/Changed&gt;&lt;Progress&gt;947&lt;/Progress&gt;&lt;Failed&gt;0&lt;/Failed&gt;&lt;/FileProgress&gt;&lt;/CBDatasourceStatus&gt;&lt;/DatasourceStatus&gt;&lt;/JobStatus&gt;&lt;/CBJob&gt;
    </Data>
      </EventData>
    </Event>

  • Azure Backup-reviewing Windows 8.1 azure client for enterprise use

    hello, i'm kicking the tires on the Azure Recovery Services Site agent for Windows 8.1. I like it - seems easy.The question I have:
    I notice you have to provide a passphrase.  We would like to test this offering with 10 employees but the management of the passphrase is a bit concern.  Is there a way from an Azure portal (or other method) to get the passphrase of each
    client machine?  as system administrators, we would like to keep a copy of the passphrase in Active Directory, Azure Portal, or some centralize place (we don't want to count on the user to solely hold that passphrase because if they lose it, they will
    be out of luck).
    can anyone speak to that?
    thanks

    Hi,
    There is no automatic way to help protect that passphrase. User should keep the passphrase and not share to others for private consider. If you worried about losing passphrase, you can let users to save it to an external place such as share a folder for
    each user to keep a copy of them.
    See:
    http://azure.microsoft.com/blog/2014/09/11/getting-started-with-azure-backup/
    Note that Azure Backup never maintains the passphrase and if the passphrase is lost by the user, the data can never be restored or recovered. Hence it is strongly recommended that the user saves the key to an external location.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Can I use Azure Backup and Windows Server Backup in a Windows Server ?

    Can I use Azure Backup and Windows Server Backup in a Windows Server ?
    I want to use both Azure Backup and Windows Server Backup for two senarios.
    For Disaster Recovery = Azure Backup to Azure Storage.
    For non-Disacter Recovery = Windows Server Backup to a on-premises disk.
    The non-Disaster Recovery mean a file or folder recovery, disk crash recovery, migrate to another servers.
    The non-Disaster Recovery need the speed of recovery just like 10 TB recovery as soon as possible.
    If I can use both Azure Backup and Windows Server Backup in a Windows Server,
    Are there any notes for using both ?
    Regards,
    Yoshihiro Kawabata 

    Hi Yoshihiro Kawabata,
    Thanks for posting here!
    Azure Backup to Azure Storage and Windows Server Backup to a on-premises disk. These are two different question and can be answered individually.
    Azure Backup to Azure Storage - Possible.
    Windows Server Backup to a on-premises disk - Possible.
    Can I use Azure Backup and Windows Server Backup in a Windows Server? Is a question.
    I will check on this and get back to you at the earliest.
    Thanks!
    Sadiqh

  • My post was moved to Microsoft Azure Azure Backup forum but that forum is not accessable or doesn't exist and I need help!

    I had the post below moved to
    Microsoft Azure
     > 
    Azure Backup
    Moved by
    Jambor yao<abbr class="affil">Microsoft contingent staff</abbr>
    Tuesday, February 24, 2015 5:22 AM
    But that forum does not exist in any drop down list to ask a question or add to my forums list and no way to access that forum directly.
    I originally post it to Azure Storage forum.
    Can anyone help with the following azure backup service failure without just moving the post to a non-existing forum?
    "cbengine.exe Application Error"
    I have a windows 2012 Standard server running with the Azure Recovery services and Azure Backup agent installed on the server. About once a week the backup fails with no error msg. Other times I get the following errors below. How can I track down and fix
    this problem.
    Log Name:      Application
    Source:        Application Error
    Date:          2/18/2015 3:01:20 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      HLA2012
    Description:
    Faulting application name: cbengine.exe, version: 1.0.8236.0, time stamp: 0x52442be2
    Faulting module name: HypervVhdHelper.DLL, version: 1.0.8236.0, time stamp: 0x52442dac
    Exception code: 0xc0000005
    Fault offset: 0x0000000000006ae7
    Faulting process id: 0x2584
    Faulting application start time: 0x01d04b4f1490c66e
    Faulting application path: C:\Program Files\Windows Azure Backup Agent\bin\cbengine.exe
    Faulting module path: C:\Program Files\Windows Azure Backup Agent\bin\HypervVhdHelper.DLL
    Report Id: 525dfd3b-b744-11e4-9433-00505601051a
    Faulting package full name:
    Faulting package-relative application ID:
    Event Xml:
    Thank you Morris

    Here's a link to your post.
    https://social.msdn.microsoft.com/Forums/azure/en-US/395a1f5c-c39b-4cd2-b55b-40c207ded798/cbengineexe-application-error?forum=windowsazureonlinebackup#395a1f5c-c39b-4cd2-b55b-40c207ded798
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Understanding Azure Backup Retention

    I'm not seeing the expected behavior of Azure Backup regarding retention. Since Azure Backup is charged by the amount of data stored, we intend to keep the cost as low as possible by only storing the most recent backup. That is, we expect to only
    pay for the storage costs of one day's worth of recover points, which in our case will be one because we do only one backup per day. We are still performing onsite backup, and there we keep many days worth of backup recovery points.
    On the Microsoft Azure Backup application's main screen, under "Destination usage" it shows "Retention: 1 days". However, I see under "Available Recovery Points" it shows "Total backups: 15", "Latest
    copy: 12/29/2014 4:30 AM", "Oldest copy: 12/19/2014 12:35 PM". When I visit the Recovery Services "PROTECTED ITEMS" on
    https://manage.windowsazure.com/, I see the number of "RECOVERY POINT", "NEWEST RECOVERY POINT", and "OLDEST RECOVERY POINT" shown match the same values displayed on the Microsoft
    Azure Backup application's main screen.
    Why is Azure Backup retaining more recovery points than expected? Why is it retaining recovery points for more days than requested?
    Trilon, Inc.

    I'm happy to provide you with any information I can to help diagnose and repair this issue. But first, let me catch you up with my situation.
    A change has occurred in my situation since I posted my question regarding understanding Azure Backup retention. I separately posted a question regarding Azure Backup on Windows Server 2008 R2 Standard fails to back up thousands of files with CATALOG FAILURE
    0x80131500 (see
    https://social.technet.microsoft.com/Forums/en-US/fb0c64f3-0066-4580-a21d-75e5af9fc879/azure-backup-on-windows-server-2008-r2-standard-fails-to-back-up-thousands-of-files-with-catalog?forum=windowsazureonlinebackup). In an attempt to resolve the issue myself,
    I tried to install 3 different updates/patches/hotfixes. In addition, while working on the problem with a Microsoft Support Engineer, I was directed to re-register the servers with Azure Backup. After all those changes, Azure Backup no longer worked at all
    on either server. Then, when I was told the CATALOG FAILURE 0x80131500 issue was resolved in the Microsoft backend servers, I deleted the Azure Backup vaults and uninstall the the Azure Backup software on both of my troubled servers. Finally, I downloaded
    and installed a fresh copy of the latest Azure Backup software, created new vaults, and started performing backup again. As expected, the CATALOG FAILURE 0x80131500 errors no longer occured. It appears that there never was a problem with either of my servers;
    instead, the CATALOG FAILURE 0x80131500 root cause was indeed located in the Microsoft backup servers, and is now fixed.
    Because of the starting over described above, I no longer have quite so many unexpected Available Recovery Points. However, I again have more than one showing up on my Windows Server 2008 R2 Standard and Windows Small Business Server 2011, despite both having
    a retention setting of 1 day and performing one daily backup job.
    So now I'll try and supply the requested information:
    1) The Azure backup agent numbers: Tell me where I can find them, and I'll provide them.
    2) Here's the requested Windows Registry value requested for our DJTS system, running Windows Server 2008 R2 Standard:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Azure Backup\Config]
    "ScratchLocation"="C:\\Program Files\\Microsoft Azure Recovery Services Agent\\Scratch\\"
    "TelemetryMachineId"="45733171-7c63-4dab-b90b-157c64368061"
    "SecondaryCertThumbprint"=""
    "ResourceId"="9064875589707684370"
    "MachineId"="325871"
    "RegistrationCertThumbprint"="a6e3b95d5c31da3dfea53f1ffbfb278c05569296"
    "AcsServiceNamespace"="euspod01id1machine09"
    "AcsHostName"="accesscontrol.windows.net"
    "AcsRPRealm"="http://windowscloudbackup/m3"
    "PrimaryCertThumbprint"="3BC70BF8B5D5DB84D148E40B394BA0A4117BDD44"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Azure Backup\Config\CloudBackupProvider]
    "ScratchLocation"="C:\\Program Files\\Microsoft Azure Recovery Services Agent\\Scratch\\"
    "WABUpdateKBLink"="http://go.microsoft.com/fwlink/p/?LinkId=229525"
    "StorageQuotaPurchaseLink"="http://go.microsoft.com/fwlink/?LinkId=205490"
    "WebPortalLink"="http://go.microsoft.com/fwlink/?LinkId=252913"
    "WABprivacyStatement"="http://go.microsoft.com/fwlink/?LinkId=221308"
    "TotalPITs"=dword:00000004
    "StartUsn_\\\\?\\Volume{29fd0333-74a3-11e4-9c76-806e6f6e6963}_FS_900931033676425925"=hex(b):30,\
      3f,97,85,01,00,00,00
    "PostSnapUsn_\\\\?\\Volume{29fd0333-74a3-11e4-9c76-806e6f6e6963}_FS_900931033676425925"=hex(b):f0,\
      5e,97,85,01,00,00,00
    "JournalId_\\\\?\\Volume{29fd0333-74a3-11e4-9c76-806e6f6e6963}_FS_900931033676425925"=hex(b):62,\
      4a,ee,2d,81,d1,cb,01
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Azure Backup\Config\Encryption]
    "EncryptionOsVersion"=dword:00000003
    And here's the requested Windows Registry value requested for our DJSERVER2 system, running Windows Small Business Server 2011:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Azure Backup\Config]
    "ScratchLocation"="C:\\Program Files\\Microsoft Azure Recovery Services Agent\\Scratch\\"
    "GlobalAcsServiceNamespace"="wuspod01rp1users"
    "GlobalAcsHostName"="accesscontrol.windows.net"
    "GlobalAcsRPRealm"="http://windowscloudbackup/m3"
    "SecondaryCertThumbprint"=""
    "ResourceId"="4326608059366417280"
    "MachineId"="325878"
    "RegistrationCertThumbprint"="0a93d4b0bf4c2fbcf45dd8e6b8eaa2744ea9195f"
    "AcsServiceNamespace"="euspod01id1machine10"
    "AcsHostName"="accesscontrol.windows.net"
    "AcsRPRealm"="http://windowscloudbackup/m3"
    "PrimaryCertThumbprint"="8CCE11CBD765DA9466569DB8ECE016F7A75B8F40"
    "TelemetryMachineId"="dcada1d5-e9b9-4470-9ecf-003bc314c876"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Azure Backup\Config\CloudBackupProvider]
    "ScratchLocation"="C:\\Program Files\\Microsoft Azure Recovery Services Agent\\Scratch\\"
    "WABUpdateKBLink"="http://go.microsoft.com/fwlink/p/?LinkId=229525"
    "StorageQuotaPurchaseLink"="http://go.microsoft.com/fwlink/?LinkId=205490"
    "WebPortalLink"="http://go.microsoft.com/fwlink/?LinkId=252913"
    "WABprivacyStatement"="http://go.microsoft.com/fwlink/?LinkId=221308"
    "TotalPITs"=dword:00000001
    "StartUsn_\\\\?\\Volume{29cbdff2-3fa7-11e0-939f-001422b0edaf}_FS_900755111003400873"=hex(b):c8,\
      1f,ed,ad,06,00,00,00
    "PostSnapUsn_\\\\?\\Volume{29cbdff2-3fa7-11e0-939f-001422b0edaf}_FS_900755111003400873"=hex(b):a8,\
      9b,ed,ad,06,00,00,00
    "JournalId_\\\\?\\Volume{29cbdff2-3fa7-11e0-939f-001422b0edaf}_FS_900755111003400873"=hex(b):44,\
      66,1a,7d,9c,d0,cb,01
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Azure Backup\Config\Encryption]
    "EncryptionOsVersion"=dword:00000003
    Trilon, Inc.

  • Unable to execute embedded application windows azure in Windows Vista and Server 2008

    I'm having problems to install the backup application Azure.
    In Windows Vista and Server 2008 .
    I segudo instructions :
    http://support.microsoft.com/es-es/kb/2934202
    But I still can not install the agent.
    When I run it , it is decompressed and then a window with an error.
    Anyone else happens ?

    The message that Windows creates me exactly is:
    Unable to execute the embedded application to complete the installation.
    After being , checking this:
    Microsoft .NET Framework 4
    Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package MFC Security Update
    Windows PowerShell 3.0 (my machine is 2.0)
    Microsoft.NET Framework 4 Client Profile (installed)
    Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (installed)
    The announcement of support Server 2008 64bit versions .
    https://msdn.microsoft.com/es-es/library/azure/jj573031.aspx#BKMK_testsrv
    I realize that my machine is 32bit Server 2008 Standard
    http://azure.microsoft.com/blog/2014/10/06/announcing-support-for-backup-of-windows-server-2008-with-azure-backup/
    It occurred to me descompri the MARSAgentInstaller package.
    Run the application, but being 32bit my system , I think the Agent application is 64bit Copies Azure .
    For this throws an error commenting same .

  • Issues with Azure Backup

    Hi
    I have issues to complete a Backup with Microsoft Azure Backup. The message says:
    "Engine encountered an unexpected error please look at the events log for more details."
    I have screenshots and error logs, where can I post/mail them?

    If FIPS encryption setting is turned on, it can cause this issue.
    Please go to this path in registry and check if the value is 1 or 0
    HKLM\System\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\Enabled
    1 means enabled. 0 means disable.
    To Disable:
    a. Click Start, type regedit in the start search box and hit enter.
    b. In the registry editor navigate to HKLM\System\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\Enabled
    c. This registry value reflects the current FIPS setting. If this setting is enabled, the value is 1. If this setting is disabled, the value is 0.
    d. To disable it double click on the file and select 0.
    e. Restart the computer and check.
    Also, please ensure both TCP and UDP port 6049 are open in Windows Firewall.
    Regards,
    Manu

  • When synchronization fails to create a backup, iTunes gives an error.

    When synchronization fails to create a backup, iTunes gives an error.
    iPhone 4, OS 5, Windows XP S3, iTunes 10. ITunes was moving a few times. Please help me.

    When synchronization fails to create a backup, iTunes gives an error.
    iPhone 4, OS 5, Windows XP S3, iTunes 10. ITunes was moving a few times. Please help me.

Maybe you are looking for

  • How do I consolidate multiple Itunes folders on one computer?

    I had a mishap with my external hard drive (I didn't know how to use it properly..yup USER ERROR!) so I have three different Itunes folders intertwined in my music folders with different previous Itunes libraries.  I made a backup of the entire music

  • Why is my iPhone home button not working?

    Recent;y my iPhone 4 home button has intermittently stopped going "home" and just stay on the last page selected.  I spoke with an apple customer service person and the said that if the horizontal tray at the bottom of the display could be too full a

  • Cannot View Youtube........?

    I am trying to view youtube.  I have downloaded Adobe 10.102.64!  I cannot view youtube.  I have windows xp. I have Internet Exploer 8  I have modzilla firefox.  I have tried installing and  uninstalling.  I have tried to apply the information, from

  • Where is the Pixel Motion Blur in AE CS6?

    Where is the Pixel Motion Blur in AE CS6?  When I type Pixel Motion Blur in the Effects Search, nothing comes up. Sean

  • CFGRIDCOLUMN combobox

    Hi all I have a bog-standard CFGRID that has one column which is a combobox. For some reason the combobox is displaying the value (an integer) rather than the text. This is my code: //This is the function that calls up the values for the combo box <c