Azure Backup fails on Windows 8.1

Hi,
I was hoping to use our windows azure account to make cloud backup of some of our PC's, they're all running Windows 7, 8 or 8.1.
I read that now azure backup support windows 7, 8 and 8.1 : https://support.microsoft.com/kb/3015072?wa=wsignin1.0
So I installed this updated package, configured a backup and tried to run it but I can't have it works it always fails: 0x1d4c2 error. I looked into the log and here is the first error that appear on the log
0B00 1EF0
01/07 00:51:33.622
70 nativeutils.hpp(41)
170BDAAE-9565-4632-84BA-A48F18F64C81
WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.Open((( HKEY ) (ULONG_PTR)((LONG)0x80000002) ), pszPath)
0B00 2130
01/07 00:51:33.672
03 miscellaneousutils.cpp(692)
170BDAAE-9565-4632-84BA-A48F18F64C81
NORMAL Hr: = [0x80070002] Could not get the value of registry key name CopyBackupEnabled under HKEY_LOCAL_MACHINE\Software\Microsoft\Windows Azure Backup
Hope someone can help me figured it out ....
Thank you!
Chris

Ok, I reinstall the app and now the last faillure I have is:
2140 28A8
01/09 21:02:14.816
71 async.cpp(948)
8DD85B67-49E3-4729-AB44-B682F81E7E94
FATAL Hr: = [0x80070020] DoAsync operation failed.
I tried on another machine running Windows 8.1 and it's not working either. I'm now going to trying on Windows 7 machine.
Thanks for any help
Chris

Similar Messages

Windows Azure Backup fails OBEngine service

Backups were running fine on my VM for months, until 11/19/2014.
Since this date, backups have been failing due to an AccessViolationException KeyManager.dll which causes cbengine.exe to crash.
Here is the detail from the eventlog:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: cbengine.exe
P2: 2.0.8692.0
P3: 542552af
P4: KeyManager.dll
P5: 2.0.8692.0
P6: 542553a5
P7: c0000005
P8: 0000000000008116
P9:
P10:
Analysis symbol:
Rechecking for solution: 0
Report Id: 7aa85bb1-7675-11e4-9416-00155de01aa3
Report Status: 4
Hashed bucket:
Here is the output from AppCrash_cbengine.exe_2876308b4d338fde9c352031c1e675e0c83996f2_06a1493e:
Version=1
EventType=APPCRASH
EventTime=130615943683897742
ReportType=2
Consent=1
UploadTime=130615943694678792
ReportIdentifier=7aa85bb2-7675-11e4-9416-00155de01aa3
IntegratorReportIdentifier=7aa85bb1-7675-11e4-9416-00155de01aa3
NsAppName=cbengine.exe
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=cbengine.exe
Sig[1].Name=Application Version
Sig[1].Value=2.0.8692.0
Sig[2].Name=Application Timestamp
Sig[2].Value=542552af
Sig[3].Name=Fault Module Name
Sig[3].Value=KeyManager.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=2.0.8692.0
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=542553a5
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=0000000000008116
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.2.9200.2.0.0.400.8
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=9fac
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=9fac4e2867de2c0bc14632ff7179424b
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=aa27
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=aa2726ad3eea6d54361060a11351616d
UI[2]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cbengine.exe
UI[5]=Check online for a solution (recommended)
UI[6]=Check for a solution later (recommended)
UI[7]=Close
UI[8]=cbengine.exe stopped working and was closed
UI[9]=A problem caused the application to stop working correctly. Windows will notify you if a solution is available.
UI[10]=&Close
LoadedModule[0]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cbengine.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\Windows\SYSTEM32\MSCOREE.DLL
LoadedModule[3]=C:\Windows\system32\KERNEL32.dll
LoadedModule[4]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[5]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[6]=C:\Windows\system32\msvcrt.dll
LoadedModule[7]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[8]=C:\Windows\system32\RPCRT4.dll
LoadedModule[9]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscoreei.dll
LoadedModule[10]=C:\Windows\system32\SHLWAPI.dll
LoadedModule[11]=C:\Windows\system32\USER32.dll
LoadedModule[12]=C:\Windows\system32\GDI32.dll
LoadedModule[13]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
LoadedModule[14]=C:\Windows\SYSTEM32\MSVCR110_CLR0400.dll
LoadedModule[15]=C:\Windows\assembly\NativeImages_v4.0.30319_64\mscorlib\51fbf5aac9c6f1aef14557276f98ad28\mscorlib.ni.dll
LoadedModule[16]=C:\Windows\system32\ole32.dll
LoadedModule[17]=C:\Windows\SYSTEM32\combase.dll
LoadedModule[18]=C:\Windows\SYSTEM32\CRYPTBASE.dll
LoadedModule[19]=C:\Windows\SYSTEM32\bcryptPrimitives.dll
LoadedModule[20]=C:\Windows\SYSTEM32\CRYPTSP.dll
LoadedModule[21]=C:\Windows\system32\rsaenh.dll
LoadedModule[22]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clrjit.dll
LoadedModule[23]=C:\Windows\system32\OLEAUT32.dll
LoadedModule[24]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System\882c88d14efa17e32acc1953755e8709\System.ni.dll
LoadedModule[25]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Serv759bfb78#\270d01dd5380f28bb384df1187f47532\System.ServiceProcess.ni.dll
LoadedModule[26]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudSharedInfra.dll
LoadedModule[27]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudEngineTracing.dll
LoadedModule[28]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\TraceWrapper.dll
LoadedModule[29]=C:\Windows\SYSTEM32\MSVCR110.dll
LoadedModule[30]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\TraceProvider.dll
LoadedModule[31]=C:\Windows\SYSTEM32\MSVCP110.dll
LoadedModule[32]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\LKRhDPM.DLL
LoadedModule[33]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudEngineFM.dll
LoadedModule[34]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudCommonFM.dll
LoadedModule[35]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\FailureModeling.dll
LoadedModule[36]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\ErrorCodeUtils.dll
LoadedModule[37]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudProxyHelper.dll
LoadedModule[38]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Core\58a5753c80817773be7d569bc2d6ba92\System.Core.ni.dll
LoadedModule[39]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.ServiceModel\b96ac95b283e1ae9e6dc2a4396bc9c1a\System.ServiceModel.ni.dll
LoadedModule[40]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Xml\7ae460b2b5c41359e80ed3c95660dbf6\System.Xml.ni.dll
LoadedModule[41]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Configuration\132c056670c4a6ad010e87ff53e6b05e\System.Configuration.ni.dll
LoadedModule[42]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Runteb92aa12#\dc798870570147bc073d2f0773c8d02e\System.Runtime.Serialization.ni.dll
LoadedModule[43]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudCommonInterface.dll
LoadedModule[44]=C:\Windows\system32\urlmon.dll
LoadedModule[45]=C:\Windows\system32\iertutil.dll
LoadedModule[46]=C:\Windows\system32\WININET.dll
LoadedModule[47]=C:\Windows\system32\USERENV.dll
LoadedModule[48]=C:\Windows\system32\profapi.dll
LoadedModule[49]=C:\Windows\SYSTEM32\Secur32.dll
LoadedModule[50]=C:\Windows\SYSTEM32\SSPICLI.DLL
LoadedModule[51]=C:\Windows\system32\SHELL32.dll
LoadedModule[52]=C:\Windows\SYSTEM32\SHCORE.dll
LoadedModule[53]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CBEngineService.dll
LoadedModule[54]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\NativeMethods.dll
LoadedModule[55]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CBEngineServiceModuleHelper.dll
LoadedModule[56]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\NativeUtils.dll
LoadedModule[57]=C:\Windows\SYSTEM32\NETAPI32.dll
LoadedModule[58]=C:\Windows\SYSTEM32\ACTIVEDS.dll
LoadedModule[59]=C:\Windows\SYSTEM32\msi.dll
LoadedModule[60]=C:\Windows\system32\CRYPT32.dll
LoadedModule[61]=C:\Windows\SYSTEM32\netutils.dll
LoadedModule[62]=C:\Windows\SYSTEM32\srvcli.dll
LoadedModule[63]=C:\Windows\SYSTEM32\wkscli.dll
LoadedModule[64]=C:\Windows\SYSTEM32\adsldpc.dll
LoadedModule[65]=C:\Windows\system32\MSASN1.dll
LoadedModule[66]=C:\Windows\system32\WLDAP32.dll
LoadedModule[67]=C:\Windows\SYSTEM32\DSROLE.DLL
LoadedModule[68]=C:\Windows\SYSTEM32\SAMCLI.DLL
LoadedModule[69]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudBackupProvider.dll
LoadedModule[70]=C:\Windows\SYSTEM32\wer.dll
LoadedModule[71]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\VssRequestor.dll
LoadedModule[72]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\NativeEtwTracer.dll
LoadedModule[73]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\iRefCounted.dll
LoadedModule[74]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cbeventpub.dll
LoadedModule[75]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\KeyManager.dll
LoadedModule[76]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\ClientStamp.dll
LoadedModule[77]=C:\Windows\SYSTEM32\VSSAPI.DLL
LoadedModule[78]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\ClusterInquiry.dll
LoadedModule[79]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CsvManager.dll
LoadedModule[80]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\DsmFs.dll
LoadedModule[81]=C:\Windows\SYSTEM32\VssTrace.DLL
LoadedModule[82]=C:\Windows\system32\WS2_32.dll
LoadedModule[83]=C:\Windows\SYSTEM32\CLUSAPI.dll
LoadedModule[84]=C:\Windows\SYSTEM32\RESUTILS.dll
LoadedModule[85]=C:\Windows\SYSTEM32\sisbkup.dll
LoadedModule[86]=C:\Windows\system32\NSI.dll
LoadedModule[87]=C:\Windows\SYSTEM32\cryptdll.dll
LoadedModule[88]=C:\Windows\SYSTEM32\clbcatq.dll
LoadedModule[89]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\HVRAzureReplicationProvider.dll
LoadedModule[90]=C:\Windows\SYSTEM32\ncrypt.dll
LoadedModule[91]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\SalDmHelper.dll
LoadedModule[92]=C:\Windows\SYSTEM32\VirtDisk.dll
LoadedModule[93]=C:\Windows\SYSTEM32\bcrypt.dll
LoadedModule[94]=C:\Windows\SYSTEM32\NTASN1.dll
LoadedModule[95]=C:\Windows\SYSTEM32\FLTLIB.DLL
LoadedModule[96]=C:\Windows\SYSTEM32\pcwum.DLL
LoadedModule[97]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CloudUtils.dll
LoadedModule[98]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\WatsonIntegrator.dll
LoadedModule[99]=C:\Windows\assembly\NativeImages_v4.0.30319_64\SMDiagnostics\f78732604518fdac525c23d94053c4bc\SMDiagnostics.ni.dll
LoadedModule[100]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CBObjectModel.dll
LoadedModule[101]=C:\Windows\system32\mswsock.dll
LoadedModule[102]=C:\Windows\SYSTEM32\DNSAPI.dll
LoadedModule[103]=C:\Windows\System32\rasadhlp.dll
LoadedModule[104]=C:\Windows\System32\fwpuclnt.dll
LoadedModule[105]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Servd1dec626#\10619c5fe8292214fbfcef53958f2e7b\System.ServiceModel.Internals.ni.dll
LoadedModule[106]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.IdentityModel\c7724d34814b7ef413f572c47b555414\System.IdentityModel.ni.dll
LoadedModule[107]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\ROCatalogInterface.dll
LoadedModule[108]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CatalogCommon.dll
LoadedModule[109]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CBEngineProxy.dll
LoadedModule[110]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\FileCatalogInterface.dll
LoadedModule[111]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\AccessControlHelper.dll
LoadedModule[112]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\IdMgmtInterface.dll
LoadedModule[113]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\SettingsInterface.dll
LoadedModule[114]=C:\Windows\SYSTEM32\IPHLPAPI.DLL
LoadedModule[115]=C:\Windows\SYSTEM32\WINNSI.DLL
LoadedModule[116]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Transactions\ae60768684128a7def00a60d3ad1f7aa\System.Transactions.ni.dll
LoadedModule[117]=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
LoadedModule[118]=C:\Windows\system32\msv1_0.DLL
LoadedModule[119]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CalExternalProxy.dll
LoadedModule[120]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\IdMgmtProxy.dll
LoadedModule[121]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\SamlTokenBuilderV2.dll
LoadedModule[122]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Security\4fd85de092b46b92d150158442b90446\System.Security.ni.dll
LoadedModule[123]=C:\Windows\SYSTEM32\DPAPI.dll
LoadedModule[124]=C:\Windows\SYSTEM32\rasapi32.dll
LoadedModule[125]=C:\Windows\SYSTEM32\rasman.dll
LoadedModule[126]=C:\Windows\SYSTEM32\rtutils.dll
LoadedModule[127]=C:\Windows\SYSTEM32\winhttp.dll
LoadedModule[128]=C:\Windows\SYSTEM32\dhcpcsvc6.DLL
LoadedModule[129]=C:\Windows\SYSTEM32\dhcpcsvc.DLL
LoadedModule[130]=C:\Windows\system32\schannel.DLL
LoadedModule[131]=C:\Windows\system32\ncryptsslp.dll
LoadedModule[132]=C:\Windows\SYSTEM32\gpapi.dll
LoadedModule[133]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Web\935caa50c55938e31a53b7e7504cf65c\System.Web.ni.dll
LoadedModule[134]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Web.28b9ef5a#\ae9e6b5057cc86d9c4696c970b21f642\System.Web.Extensions.ni.dll
LoadedModule[135]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\ReliableWcfClient.dll
LoadedModule[136]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\AsyncInterface.dll
LoadedModule[137]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\IdMgmtCatalogInterface.dll
LoadedModule[138]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine4.dll
LoadedModule[139]=C:\Windows\SYSTEM32\MSVCR120_CLR0400.dll
LoadedModule[140]=C:\Windows\system32\PSAPI.DLL
LoadedModule[141]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Servf73e6522#\b2c4ffc928f332550008d48592fef264\System.ServiceModel.Web.ni.dll
LoadedModule[142]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Net.Http\1b58706b8e3775c745148cce6b10b3a9\System.Net.Http.ni.dll
LoadedModule[143]=C:\Windows\SYSTEM32\wevtapi.dll
LoadedModule[144]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\Interop.TaskScheduler.dll
LoadedModule[145]=C:\Windows\System32\taskschd.dll
LoadedModule[146]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cb_ps.dll
LoadedModule[147]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\SettingsController.dll
LoadedModule[148]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\SettingsImpl.dll
LoadedModule[149]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Management\c5f5f8d6fb4bcd57658a8572e9209a5a\System.Management.ni.dll
LoadedModule[150]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\wminet_utils.dll
LoadedModule[151]=C:\Windows\system32\wbem\wmiutils.dll
LoadedModule[152]=C:\Windows\SYSTEM32\wbemcomn.dll
LoadedModule[153]=C:\Windows\system32\wbem\wbemprox.dll
LoadedModule[154]=C:\Windows\system32\wbem\wbemsvc.dll
LoadedModule[155]=C:\Windows\system32\wbem\fastprox.dll
LoadedModule[156]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\CalExternalUnmanagedProxy.DLL
LoadedModule[157]=C:\Windows\System32\msxml6.dll
LoadedModule[158]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\IDContextStoreUnmanagedProxy.DLL
LoadedModule[159]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\IDContextStore.dll
LoadedModule[160]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\HvrTelemetryHelper.dll
LoadedModule[161]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\EtwTraceWrapper.dll
LoadedModule[162]=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\PrepUnmanagedProxy.DLL
LoadedModule[163]=C:\Windows\SYSTEM32\VERSION.dll
LoadedModule[164]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\diasymreader.dll
LoadedModule[165]=C:\Windows\SYSTEM32\ntmarta.dll
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=cbengine.exe
AppPath=C:\Program Files\Microsoft Azure Recovery Services Agent\bin\cbengine.exe
NsPartner=windows
NsGroup=windows8
Here is the callstack:
Application: cbengine.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
Stack:
at Microsoft.SnapIns.CloudBackup.UI.Proxy.JobProviderProxy.BackupAdhoc(Microsoft.SnapIns.CloudBackup.UI.Proxy.BPTemplateSettings, System.String, System.Guid)
at Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBJob+<>c__DisplayClass1.<StartBackup>b__0()
at Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBJob.TriggerJobWithConcurrencyCheck(System.Action)
at Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBPolicy.StartBackup(System.Guid)
at Microsoft.Internal.CloudBackup.Engine.CBEngine+<>c__DisplayClass3c.<StartCBBackup>b__3b()
at Microsoft.Internal.Common.FailureModeling.FMComponent`3[[Microsoft.Internal.CloudBackup.Common.Diag.DiagComponents+Id, CloudSharedInfra, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35],[Microsoft.Internal.CloudBackup.Common.FailureModeling.CloudFMConstants+OperationId,
CloudCommonFM, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35],[Microsoft.Internal.CloudBackup.Common.Utils.Errors.ErrorCode, ErrorCodeUtils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]._FMBlock(System.String,
Int32, FMBlockArgs<Id,OperationId,Microsoft.Internal.CloudBackup.Common.Utils.Errors.ErrorCode>, System.Action, System.Action)
at Microsoft.Internal.CloudBackup.Engine.CBEngineHelper.CallOMFunction(System.Action)
at Microsoft.Internal.CloudBackup.Engine.CBEngine.StartCBBackup(Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBPolicy, Boolean, Boolean)
at DynamicClass.SyncInvokeStartCBBackup(System.Object, System.Object[], System.Object[])
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(System.Object, System.Object[], System.Object[] ByRef)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(System.ServiceModel.Dispatcher.MessageRpc ByRef)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(System.ServiceModel.Dispatcher.MessageRpc ByRef)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(System.ServiceModel.Dispatcher.MessageRpc ByRef)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean)
at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(System.ServiceModel.Channels.RequestContext, Boolean, System.ServiceModel.OperationContext)
at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(System.ServiceModel.Channels.RequestContext, System.ServiceModel.OperationContext)
at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(System.IAsyncResult)
at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
at System.Runtime.AsyncResult.Complete(Boolean)
at System.ServiceModel.Channels.TransportDuplexSessionChannel+TryReceiveAsyncResult.OnReceive(System.IAsyncResult)
at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
at System.Runtime.AsyncResult.Complete(Boolean)
at System.ServiceModel.Channels.SynchronizedMessageSource+ReceiveAsyncResult.OnReceiveComplete(System.Object)
at System.ServiceModel.Channels.SessionConnectionReader.OnAsyncReadComplete(System.Object)
at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
at System.Net.LazyAsyncResult.Complete(IntPtr)
at System.Net.Security.NegotiateStream.ProcessFrameBody(Int32, Byte[], Int32, Int32, System.Net.AsyncProtocolRequest)
at System.Net.Security.NegotiateStream.ReadCallback(System.Net.AsyncProtocolRequest)
at System.Net.FixedSizeReader.CheckCompletionBeforeNextRead(Int32)
at System.Net.FixedSizeReader.ReadCallback(System.IAsyncResult)
at System.Runtime.AsyncResult.Complete(Boolean)
at System.ServiceModel.Channels.ConnectionStream+IOAsyncResult.OnAsyncIOComplete(System.Object)
at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(System.Object, System.Net.Sockets.SocketAsyncEventArgs)
at System.Net.Sockets.SocketAsyncEventArgs.FinishOperationSuccess(System.Net.Sockets.SocketError, Int32, System.Net.Sockets.SocketFlags)
at System.Net.Sockets.SocketAsyncEventArgs.CompletionPortCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
Can anyone point me in the right direction?
I am unaware of any changes to the VM apart from the usual windows updates.
Kind regards,
Jay

Hi,
If the issue is more about Windows Azure backup, i think you may ask in:
https://social.msdn.microsoft.com/forums/azure/en-US/home?forum=windowsazureonlinebackup
Regards.
Vivian Wang

Azure Backup fails with error 0x003E6 after data transmission (Protection Agent Failure)

On a Windows Essentials 2012 Server (German) I had Azure Backup up and running for several months.
(Probably) After adding features to support Remote Access, Azure Backup stopped working.
The backup schedule executes and transfers all data, than it constantly fails with the error:
"Fehler beim Vorgang aufgrund eines Schutz-Agent-Fehlers. Wiederholen Sie den Vorgang (0x003E6)" which translates to the english "The operation failed because of a protection agent failure. Retry the operation (0x003E6)".
An update of the Backup Agent to the latest version did not resolve the issue.
Does anybody know details about this error and the reason behind it?
Regards,
Dominik

Hi Dominik,
First please check if there is any new policy was set such as a throttle for uploading data, or a firewall was enabled before the issue occurs.
There is no enough information for finding out the exact cause. Please also check if there is any error and event logs. These can be found in the Application Event log under WindowsAzureBackup.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Rman backup fails on windows when using batch file

Hello Gurus ..
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:\> \\3.193.211.19\sgdba\rman\bkp_acressit.bat
D:\>rman catalog rman/******@acressit target / cmd
file=E:\sgdba\rman\bkp_arch.rcv log E:\sgdba\rman\sit_arch_rman_backup.log
RMAN-00557: could not open MSGLOG "E:\sgdba\rman\sit_arch_rman_backup.log"
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00556: could not open CMDFILE "E:\sgdba\rman\bkp_arch.rcv"
Contents of the batch file and RCV file as below:
Batch File:
rman catalog rman/*******@acressit target / cmdfile=E:\sgdba\rman\bkp_arch.rcv log E:\sgdba\rman\sit_arch_rman_backup.log
RCV File:
RUN {
ALLOCATE CHANNEL ch1 TYPE
DISK FORMAT 'E:\ORA_RMAN_BACKUP\ARCH_%d_%u_%s_%p';
BACKUP ARCHIVELOG delete input;
RELEASE CHANNEL ch1;
EXIT;
--------------------------xxxxxxxxxxxxxx------------------------
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
Any help will be appriciated.
Thanks & Regards
Ashish

Ashish wrote:
hi Atil,
u have guessed it correctly, I came to know that issue later I copy file on local PC and it works fine.
Now I am working on netbackup server. I want to use the same script to initiate backup from netbackup server. Do you have any idea or any guidelines from you will appriciate.
Thanks
AshishAshish,
Is it "symantec's netbackup"? I do not know that product and if it has an option to enter your own RMAN scripts. On the other hand, it should be able to create irman scripts according to your backup job definition.
Regards
Gokhan

Backup failed for Windows 2008 R2 error code 2147755009 event id 19

Hi Guys,
I'm doing Windows server backup to a NAS drive via iSCSI target, and everything works fine until a few weeks back where my backup started to fail with the above event ID and error code. Description provided by Microsoft doesn't help either as it simply doesn't
explain much at all. (http://technet.microsoft.com/en-us/library/cc734218%28v=ws.10%29.aspx)
I updated the firmware of the NAS drive, make sure iSCSI connection wasn't dropping, and i even manage to do a backup manually via the "Backup Once" action. But when it comes to scheduled backup, it keeps on failing. I'm pretty sure the NAS drive
is working fine as well as iSCSI connection since i can do a backup manually.
Any idea guys?

Hi,
Could you please provide more detailed information about the error? You could refer to the article below to check if it helps:
Event ID 19: The backup operation attempted at '‎specific date' has failed to start, error code '2155348032'
https://bluesolutions.zendesk.com/entries/23345746-Event-ID-19-The-backup-operation-attempted-at-specific-date-has-failed-to-start-error-code-215534803
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OneKey Recovery - backup fails in Windows 10

Using OneKey Recovery version 8.1.0.2619 on Windows 10 Home I'm trying to create a backup on an external hard drive and it crashes on the "Initializing.." phase with the error:
Exception thrown at 0x00007FFF6AB73B62 (SBREngine.dll) in OneKey Recovery.exe: 0xC0000005: Access violation reading location 0x0000000023B64880. Is there something I can do to make it work or do I have to wait for the next version? Thanks,
Adam Tal

Hi Don, you don't mention the APP, Method, nor destination of this Backup.

Windows Server 2008 R2 Backup failing with error - 0x8004231F

Hi,
I have Windows Server 2008 R2 Web Edition. Everything was working fine until recently. I tried checking for the log files, but I see that there are no log files that are created now in the location C:\Windows\Logs\WindowsServerBackup. The only files that
are being created recently are of the type mentioned below.
Wbadmin.1.etl
WbadminUI.0.etl
etc.
I tried removing the old backup and starting a new backup. But, even now it is failing with the same error.
When running the backup from the PowerShell, the output is as below.
PS C:\Users\administrator> Wbadmin start backup -backupTarget:\\localhost\E$\WindowsImageBackup\Server01 -systemState -vss
Copy
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Note: The backed up data cannot be securely protected at this destination.
Backups stored on a remote shared folder might be accessible by other
people on the network. You should only save your backups to a location
where you trust the other users who have access to the location or on a
network that has additional security precautions in place.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB) (Selected Files),SAN(I:) (Selected Files),Local Disk(C:) (Selected
Files) to \\localhost\E$\WindowsImageBackup\Server01.
Do you want to start the backup operation?
[Y] Yes [N] No y
The backup operation to \\localhost\E$\WindowsImageBackup\Server01 is starting.
Starting to back up the system state [12/8/2013 9:29 AM]...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Summary of the backup operation:
The backup of the system state failed [12/8/2013 9:30 AM].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-08-12-2013_09-29-49.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-08-12-2013_09-29-49.log
There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes
to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup
storage destination and volumes included in the backup.
Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more th
an 500 megabytes, the minimum is 320 megabytes of free space.
Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x8004231f)
Insufficient storage available to create either the shadow copy storage file or other shadow copy data.
If you see the free space available in each of the drives, they are in plenty.
C:\ 7.5 GB free of 70 GB
E:\ 250 GB free of 499 GB
I:\ 86.7 GB free of 350 GB
I am out of any hints on how I can proceed now. Has any one had similar issues? Can any one give any hint on this? Thanks.
Thanks.

Some Additional info.
Shadow Copy Storage association
   For volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\)\\?\Volume{a9f
b0474-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}
\)\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 32 MB (32%)
Shadow Copy Storage association
   For volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01d1}\
   Shadow Copy Storage volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01
d1}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 35 GB (10%)
Shadow Copy Storage association
   For volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01bd}\
   Shadow Copy Storage volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01
bd}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 149.999 GB (30%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e69
63}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 4.99 GB (7%)
Hope this might also help you experts to get a little more information.

Window System Image Backup Fails to Back Up EFS System Partition

I am trying to use WBADMIN to take a complete system image of my system with the following command:
wbadmin start backup -backuptarget:[NETWORK SHARE] -include:C: -allcritical
WBADMIN is able to create shadow copies of all the volumes on my system, but when it begins to create a backup of the EFI System Volume, it fails immediately:
The backup operation to [NETWORK SHARE] is starting.
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a backup of volume SYSTEM(EFI System Partition) (300.00 MB), copied (0%).
Summary of the backup operation:
The backup operation stopped before completing.
The backup operation stopped before completing.
Detailed error: The I/O operation has been aborted because of either a thread exit or an application request.
Log of files successfully backed up:
C:\WINDOWS\Logs\WindowsBackup\Backup-01-02-2014_18-45-09.log
Log of files for which backup failed:
C:\WINDOWS\Logs\WindowsBackup\Backup_Error-01-02-2014_18-45-09.log
There was a failure in preparing the backup image of one of the volumes in the backup set.
The I/O operation has been aborted because of either a thread exit or an application request.
The system is encrypted with Bitlocker, and does not have a TPM. I am also running Carbonite, but I have disabled it and the results are the same.
No data is actually written to the log files either, which is strange. The GUI System Image Backup utility also provides virtually the same error. Any thoughts?

Hi,
Try to test in WinRE to see what the result is.
Alex Zhao
TechNet Community Support

Azure backup Windows 8.1 error

Since I learned that Azure Backup turned available for Windows 8.1 I have tried to get it to work but I have not succeeded yet. I have followed the instructions but when i try to make a backup I get the 0x1D4C2 error. When looking in the logs I don't see
any clear indications of what went wrong. There are a lot of warnings in the log though, so I have broken out some of them below. Note that there are more stuff happening in between the lines. If it's needed I can publish the whole log.
0A10 167C 01/28 14:21:17.735 71 nativeutils.hpp(42) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.GetValue(pszKey, pT)
0A10 167C 01/28 14:21:17.735 71 replica.cpp(532) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : RegUtils::GetValueFromRegKey( L"Software\\Microsoft\\" L"Windows Azure Backup" L"\Config" L"\CloudBackupProvider", ssRegKeyName.PeekStr(), &dwValue)
0A10 167C 01/28 14:21:17.735 71 nativeutils.hpp(42) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.GetValue(pszKey, pT)
0A10 167C 01/28 14:21:17.735 71 replica.cpp(532) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : RegUtils::GetValueFromRegKey( L"Software\\Microsoft\\" L"Windows Azure Backup" L"\Config" L"\CloudBackupProvider", ssRegKeyName.PeekStr(), &dwValue)
0A10 167C 01/28 14:21:17.735 03 registryutils.cpp(171) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Failed: Unable to get Value HKLM\鉈돁翸\Software\Microsoft\Windows Azure Backup\Config\CloudBackupProvider
0A10 167C 01/28 14:21:17.735 71 dscontext.cpp(932) [000000001C700CB0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : StartUsn_\\?\Volume{34b94470-87aa-4d96-9741-667a7203f311}_FS_1576418199653472395: lVal : RegUtils::GetValue(REG_KEY_DLS_CLOUDBACKUPPOROVIDER_CONFIG, GetUsnRegValueName(L"StartUsn", ssVolumeName).PeekStr(), &registryStartUsn)
0A10 167C 01/28 14:21:17.735 71 nativeutils.hpp(42) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.GetValue(pszKey, pT)
0A10 167C 01/28 14:21:17.735 71 replica.cpp(532) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : RegUtils::GetValueFromRegKey( L"Software\\Microsoft\\" L"Windows Azure Backup" L"\Config" L"\CloudBackupProvider", ssRegKeyName.PeekStr(), &dwValue)
0A10 167C 01/28 14:21:17.735 71 nativeutils.hpp(42) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.GetValue(pszKey, pT)
0A10 167C 01/28 14:21:17.735 71 replica.cpp(532) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : RegUtils::GetValueFromRegKey( L"Software\\Microsoft\\" L"Windows Azure Backup" L"\Config" L"\CloudBackupProvider", ssRegKeyName.PeekStr(), &dwValue)
0A10 167C 01/28 14:21:17.735 03 workitem.cpp(86) [000000001C889DE0] 43C219F4-44AA-4409-ABD2-626263485F7A ACTIVITY Idle Timer created with timeout = 390000
0A10 167C 01/28 14:21:17.735 70 acceptdatasetsubtask.cpp(354) [000000001C9FDAE0] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CAcceptDatasetSubTask::Initialize: Target path - \\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\
0A10 167C 01/28 14:21:17.735 18 dsmreceiversubtaskbase.cpp(39) [000000001CA425A0] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CDsmReceiverSubTaskBase: constructor [000000001CA425A0] openovl[000000001CA42710] msgovl[000000001CA42808] closeovl[000000001CA42760]
0A10 167C 01/28 14:21:17.735 18 dsmreceiversubtaskbase.cpp(39) [000000001CA11310] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CDsmReceiverSubTaskBase: constructor [000000001CA11310] openovl[000000001CA11480] msgovl[000000001CA11578] closeovl[000000001CA114D0]
0A10 167C 01/28 14:21:17.735 18 dsmsendersubtaskbase.cpp(47) [000000001CA67040] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CDsmSenderSubTaskBase: constructor [000000001CA67040] openovl[000000001CA671B0] msgovl[000000001CA672B0] closeovl[000000001CA67200]
0A10 167C 01/28 14:21:17.735 18 writeriterator.cpp(82) [0000000019527740] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CFileWriterIterator:Init(overwrite:0, setarchive:0, setchangetime:1, skiptargetmetadatarestore:0, restoresec:1, recreaterp:1, throttle:0) called
0A10 167C 01/28 14:21:17.735 18 writeriterator.cpp(221) [0000000019527740] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CFileWriterIterator::AddAlternateLocationMapping(filepath:\\?\Volume{34b94470-87aa-4d96-9741-667a7203f311}\, filespec:*, destination:\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\) called
0A10 167C 01/28 14:21:17.735 18 readeriterator.cpp(289) [000000001CA13C10] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CFileReaderIterator::SetFileSystemFlags (0x9) called
0A10 167C 01/28 14:21:17.735 18 iteratorutils.cpp(690) 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CaseSensitivity NOT enabled on the machine
0A10 167C 01/28 14:21:17.735 18 readeriterator.cpp(110) [000000001CA13C10] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CFileReaderIterator:AddIncludeFiles(filepath:\\?\Volume{34b94470-87aa-4d96-9741-667a7203f311}\Users\Andreas\Synk\, filespec:*, snapshotpath:\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\Users\Andreas\Synk\) called
0A10 167C 01/28 14:21:17.735 18 fsutils.cpp(4049) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\Users\Andreas\Synk\
0A10 167C 01/28 14:21:17.735 18 fsutils.cpp(624) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070003] : Failed to get attributes for \\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\Users\Andreas\Synk\
0A10 167C 01/28 14:21:17.735 18 fsutils.cpp(2188) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80990a54] : Source path not found:\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\Users\Andreas\Synk\
0A10 167C 01/28 14:21:17.767 70 nativeutils.hpp(42) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : r.GetValue(pszKey, pT)
0A10 167C 01/28 14:21:17.767 70 filespeclocalcache.cpp(308) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070003] : Encountered Failure: : lVal : hFile = ::CreateFileW( ssFileName.PeekStr(), (0x80000000L), 0, 0, 3, 0x00000080, 0)
0A10 167C 01/28 14:21:17.767 18 pruningiterator.cpp(479) [000000001CAC9CA0] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CPruningIterator::GetNextFile - File [\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\System Volume Information\FVE2.{09cf57b8-9e6c-43d4-ae1f-0408882a397d}.1] returned for deletion
0A10 1AD8 01/28 14:21:17.767 70 itemcatalogupdater.cpp(259) 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Hr: = [0x00000000] QueryTaskId success!.
0A10 1AD8 01/28 14:21:17.767 70 catalogfailurehandler.cpp(343) [000000001CA53620] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL CCatalogFailureHandler :: GetLastFailedEntries, Reading catalog failures in Last Backup..
0A10 1AD8 01/28 14:21:17.767 70 catalogfilehelper.cpp(287) [000000001C8CB610] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Opening file - C:\Program Files\Microsoft Azure Recovery Services Agent\Scratch\CoFLists\CatalogLists\{BD5BA688-EF07-416C-A244-52B95FFF1CCE}_CatalogFailedEntry_B.dat with IsReadOnly = true
0A10 1AD8 01/28 14:21:17.767 70 catalogfailurehandler.cpp(549) [000000001CA53620] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] CCatalogFailureHandler :: OnPreviousErrorUploadFinished failed to delete old records file
0A10 1AD8 01/28 14:21:17.767 70 catalogfailurehandler.cpp(550) [000000001CA53620] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
0A10 1AD8 01/28 14:21:17.767 70 itemcatalogupdater.cpp(1044) [000000001C890890] 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Hr: = [0x00000000] SetCatalogFailureHelper::UploadPreviousFailures : Completed.
0A10 1AD8 01/28 14:21:17.767 70 itemcatalogupdater.cpp(566) 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Uploading 1 RO entries
0A10 1AD8 01/28 14:21:17.767 79 WcfClient.cs(944) 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Executing web service call | Params: {ServiceInterface = Microsoft.Internal.CloudBackup.Common.FileCatalog.Interface.IFileCatalogExternalChannel}{Description = UpdateROArgs}{TargetEndpoint = https://pod01-fc1.ne.backup.windowsazure.com/FileCatalogExternalService.svc}
0A10 1AD8 01/28 14:21:17.767 69 CBEngineWcfClientHelper.cs(320) 43C219F4-44AA-4409-ABD2-626263485F7A NORMAL Setting RequestId header for outgoing request | Params: {RequestId = 8dcfb39f-3022-4d3a-b73f-b11e290758e0}{WorkitemId = 5b81881f-7d02-47b0-bb1a-a266bfec2522}{TaskId = 43c219f4-44aa-4409-abd2-626263485f7a}{AgentVersion = 2.0.8694.0}
0A10 167C 01/28 14:21:17.767 18 fswrapper.cpp(932) [000000001DC1E310] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Parameter: [0x80070020], FilePath = \\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\System Volume Information\FVE2.{09cf57b8-9e6c-43d4-ae1f-0408882a397d}.1
0A10 167C 01/28 14:21:17.767 18 fswrapper.cpp(932) [000000001DC1E310] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] : CreateFile failed \\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\System Volume Information\FVE2.{09cf57b8-9e6c-43d4-ae1f-0408882a397d}.1 with error :32
0A10 167C 01/28 14:21:17.767 70 onlinesubtask.cpp(496) [000000001C9FDAE0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] COnlineSubTask::UpdateStatus => hr
0A10 167C 01/28 14:21:17.767 71 dscontext.cpp(152) [000000001C700CB0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Last completed state for Ds Id (1576418199653472395) is 18
0A10 167C 01/28 14:21:17.767 71 dscontext.cpp(158) [000000001C700CB0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Ds Id (1576418199653472395) failed. DLS: 0 HRESULT: 0x80070020
0A10 167C 01/28 14:21:17.767 71 replicator.cpp(315) [000000001C840BA0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] SetupReplicationForReplica unsuccessful for replica id ({BD5BA688-EF07-416C-A244-52B95FFF1CCE}) Volume (\\?\Volume{34b94470-87aa-4d96-9741-667a7203f311}\))
0A10 167C 01/28 14:21:18.188 71 backupasync.cpp(1045) [000000001C8B2730] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] Backup Progress: Failed
0A10 167C 01/28 14:21:18.548 22 vdshelper.cpp(923) [000000001A7F6600] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80990fb0] Disk [\\?\PHYSICALDRIVE2] is not found as unknown
0A10 167C 01/28 14:21:18.595 03 dynamicloadedmodule.cpp(91) [000000001DC1F230] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x8007007e] : Failed to load DLL [C:\windows\system32\WSBOnline.dll]
0A10 167C 01/28 14:21:18.595 79 bpbackupstoreutils.cpp(417) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Snap-In Updation skipped because dll not loaded
0A10 167C 01/28 14:21:18.595 79 bpbackupstoreutils.cpp(157) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Snap-In Updation Skipped because WSBOnline.dll was not found.
0A10 167C 01/28 14:21:18.595 79 bpbackupstoreutils.cpp(390) 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Error trying to add regkey for completion success ignoring
I have tried to completely re-install the agent and remove the vault in Azure.

Hi,
This is a known issue under investigation. Azure agent is not able to prune bitlocker file during backup.
DC1E310] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Parameter: [0x80070020], FilePath =
\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\System Volume Information\FVE2.{09cf57b8-9e6c-43d4-ae1f-0408882a397d}.1
0A10 167C 01/28 14:21:17.767 18 fswrapper.cpp(932) [000000001DC1E310] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] : CreateFile failed
\\?\Volume{325b8041-a65d-11e4-8278-60029272e49c}\System Volume Information\FVE2.{09cf57b8-9e6c-43d4-ae1f-0408882a397d}.1 with error :32
0A10 167C 01/28 14:21:17.767 70 onlinesubtask.cpp(496) [000000001C9FDAE0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Failed: Hr: = [0x80070020] COnlineSubTask::UpdateStatus => hr
0A10 167C 01/28 14:21:17.767 71 dscontext.cpp(152) [000000001C700CB0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Last completed state for Ds Id (1576418199653472395) is 18
0A10 167C 01/28 14:21:17.767 71 dscontext.cpp(158) [000000001C700CB0] 43C219F4-44AA-4409-ABD2-626263485F7A WARNING Ds Id (1576418199653472395) failed. DLS: 0 HRESULT: 0x80070020
Where ErrorCode: 0x80070020 (-2147024864): The process cannot access the file because it is being used by another process.
No ETA on a fix at this time.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Windows 2008 R2 backup fails with event 521 error code 2155348001

Windows Server 2008 R2 SP1. Hyper-V role installed.
OS on drive C. All VMs stored on Drive D.
I am attempting to run a Bare Metal backup of the host system to a network share.
Drive D is not included in the backup job. I am getting the following error:
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          1/10/2014 11:28:52 PM
Event ID:      521
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SHAQTUS.scdl.local
Description:
The backup operation that started at '‎2014‎-‎01‎-‎11T04:08:50.683000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
details for a solution, and then rerun the backup operation once the issue is resolved.
Reviewing event details, as suggested, does not offer any solution.
I have tried the suggested solutions in other similar threads of increasing the timeout value with the registry entry.
This does not work.
I have not tried reregistering the VSS writers manually, as the only links I have found are for server 2003/2008 (not R2) and explicitly state that they won’t work on higher versions of the OS, since they now utilize manifests and the manual procedure could
cause problems for those servers. Haven't found similar procedures for 2008 R2.
I have been able to narrow this down a bit.
A Windows 2008 R2 SP1 server with Hyper-V installed – backup to a network share is successful;
Install the DPM 2012 agent – same backup fails with the 2155348001 error.
We use DPM 2012 to backup VMs, but DPM cannot perform a bare metal backup/restore of server and the 2012 version no longer has the DPMSRT feature.
I prefer to run Bare Metal Backup to a file server share.
Stuck on this one.
Rick

Hi,
The issue is related to DPM, I would suggest you ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

Hi
We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
i am stumped, any advice would be great!

Hi
Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261645</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
</EventData>
</Event>
AND
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261646</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
</EventData>
</Event>
and
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2034
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2034</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261649</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>FFFFFFFC</Data>
</EventData>
</Event>
and
Log Name: Application
Source: SPP
Date: 21/01/2013 10:16:30
Event ID: 16389
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying... More info: .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SPP" />
<EventID Qualifiers="0">16389</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261650</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft Exchange Writer</Data>
<Data>
</Data>
<Data>The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
<Data>
</Data>
<Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
</EventData>
</Event>

Windows 7: Windows Backup failed 0x81000031

Windows backup ran, and my once-pristine and empty backup drive now has something filling its space, so I assume some files were successfully backed up. Thing is, the Action Center icon has the red x on it and it comes up with one issue: Check, your backup (Important). Clicking this issue produces the following dialog:
Windows Backup: Troubleshooting Options
Check your backup
Windows Backup failed while determining libraries location of one of the users included in the backup.
Details: BitLocker Drive Encryption cannot be used because critical BitLocker system files are missing or corrupted. Use Windows Startup Repair to restore these files to your computer.
Options:
*Try to run backup again
*Change backup settings
Error code: 0x81000031
Thing is, I'm using home premium. I don't see bitlocker as an option and I'm not terribly enthused about having to repair bitlocker when I can't use it to begin with. (Primarily, because I use Windows 7 Home Premium. Even if I used a version which supported bit locker, I'd never use it to begin with - I lack a TPM chip which means that anybody who has physical access to my machine could compromise my security regardless of bitlocker, it'd just take slightly longer for them if bitlocker were present.)
I'm digressing, the point is I don't use bitlocker and I don't know how not having bitlocker prevents Windows 7 from copying files from one drive to another and making a note in a logfile that the files were backed up. I realize I simplify the method of backing files up but it doesn't get much more complex than copying them to a separate location and timestamping them.
tl;dr: Windows Backup produced error code 0x81000031 because bitlocker drive encryption cannot be used. I don't want to use bit locker drive encryption I just want to back my files up to an external drive. Suggestions? Preferably ones that don't make me run Windows Startup Repair.

Well 4 years later same problem simple fix, did every thing else as suggested by microsoft sys repair start up repair etc etc and just removing the drive that was included in library fixed the issue i have spent hours on
now have to reinstall all that sys restore removed...SO EVERYBODY do what Sneha said first..
Clicked "Start", then "Computer".
Right clicked on the "Library" I wanted to modify, and selected "properties".
Immediately saw that my DVD drive was an included folder in the library.
Clicked on the drive in the list, and the Remove Button became active.
Clicked on "Remove" and it removed the drive from the list.
Clicked on "Incude Folder" and added in my real backup folder location (not required, I just want a libray connection to
it).
Clicked on "Ok". thanks ath1234 for the process..Cheers

Azure Backup CATALOG FAILURE 0x80131500 on Windows 8.1 Pro

I recently installed the new Azure Backup client on a Windows 8.1 Pro computer to test the service. Every backup that is run is resulting in hundreds of skipped files showing the same error:
CATALOG FAILURE 0x80131500
A random check of some of the files with this error revealed that some are backed up and available for restore whereas others do not appear to be available for restore. Further testing showed that the files that are available for restore can be restored.

Hi,
The error "CATALOG FAILURE 0x80131500" was mentioned a lot in these several days.
Personally I tested to perform a backup on a Windows 2012 R2 system with Agent version 2.0.8692.0 and it finished successfully. But we still reported this issue to product team and they are working on it now. If there is any update I will post back quickly.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Azure Backup-reviewing Windows 8.1 azure client for enterprise use

hello, i'm kicking the tires on the Azure Recovery Services Site agent for Windows 8.1. I like it - seems easy.The question I have:
I notice you have to provide a passphrase. We would like to test this offering with 10 employees but the management of the passphrase is a bit concern. Is there a way from an Azure portal (or other method) to get the passphrase of each
client machine? as system administrators, we would like to keep a copy of the passphrase in Active Directory, Azure Portal, or some centralize place (we don't want to count on the user to solely hold that passphrase because if they lose it, they will
be out of luck).
can anyone speak to that?
thanks

Hi,
There is no automatic way to help protect that passphrase. User should keep the passphrase and not share to others for private consider. If you worried about losing passphrase, you can let users to save it to an external place such as share a folder for
each user to keep a copy of them.
See:
http://azure.microsoft.com/blog/2014/09/11/getting-started-with-azure-backup/
Note that Azure Backup never maintains the passphrase and if the passphrase is lost by the user, the data can never be restored or recovered. Hence it is strongly recommended that the user saves the key to an external location.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

Azure Backup fails on Windows 8.1

Similar Messages

Maybe you are looking for