[b]Urgen t- How to setup my isqlpus[/b]

hello
Install oracle 9.2 database, all the following file are installed http.conf, oracle_apache.conf, isqlplus.conf
My problem when i start running my http server Apache, I recieved denied access nessage in line 92, saying failed to create fastcgi
Any help well be appreciated.
Thanks
Elhag

Take a look at this FAQ entry that might help you:
http://otn.oracle.com/support/tech/sql_plus/htdocs/runtime.html#isql_mutex_error
Alison

Similar Messages

How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete

How to setup a static IP for a wireless printer

This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it. For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better. At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected". The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
The only way to fix this is reboot, and then the printer shows up again in Preferences. I select it and all is well again...until a few days pass and the same thing happens again. Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use. I also have an Epson Artisan 725 and the same thing happens with it about once a week. Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer. Any help would be greatly appreciated.

You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
If you have AirPOrt Extreme, you could do this:
In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
Start up the AiPort Admin Utility
Go to Network tab
click + in the DHCP reservations
Choose an IP you want for your ATV & Enter the MAC address
From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
It is not a static IP in a true sense, but behaves just like one.
Works great for me...
If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

How to setup Charms in a 2 tier landscape ?

Hi All,
We have a two tier landscape i.e only having development and production system so how to setup STMS and all other settings in this type of scenario.
Can we use Virtual system in STMS as a Quality system ? If yes then please guide us and tell me how to proceed as if we dont know how to add virtual system in SMSY in solman. Please provide us with a clear picture and give us detail documentation if possible.

Hi All,
Please tell me as per the SAP standard recommendation is it necessary to have a cycle like DEV->QUAL-PROD for Charms as we are not having any Quality system or Client here in our landscape.
Please suggest a way how to proceed in this case. Please help me out.

How to setup breakpoints in a vector space?

Hi,
How to setup breakpoints in a 2D vector space in NI 7344 and check for them using flex_read_breakpoint_status_rtn?
Thanks.

Hi,
Is Office Communicator something to do with the Word, Exel and Powerpoint Office Package ?
What sort of Screen Names or IDs do you use with that ?
If these are MSN/Live accounts names then it can be made to work for Text Chats but not Video or Audio Only chats
10:38 PM Friday; April 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to setup iChat in a office

How to setup iChat in a office that using Office Communicator as a IM ?

Hi,
Is Office Communicator something to do with the Word, Exel and Powerpoint Office Package ?
What sort of Screen Names or IDs do you use with that ?
If these are MSN/Live accounts names then it can be made to work for Text Chats but not Video or Audio Only chats
10:38 PM Friday; April 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to Setup Historical DSC Database on a standalone Server

Hey @all,
I am looking for documentation how to setup a standalone server for the DSC Module(Ver. 8) Historical Database.
My aim is to log all data to this server. The Server will be running Win2K.
Do I have to install the complete Labview 8 software and the DSC Module?
Does a walkthrough exist how to setup a DSC server?
Thx!
Carsten

After installing the runtime you should only have to reboot the computer in order to get the citadel service running. At the point, for citadel purposes, this machine will behave as though you had the DSC development system installed. The 8.0 runtime has no setup requirements...it should only need to be installed. Unlike previous versions, 8.0 requires you to build your application into an executable and the runtime should be invisible to you once you install it. If this is not the case, please post about it so it can be looked at.
If you have specific questions, please post them and I will either try and help you find the answers, get them posted, or answer them myself.
Regards,
Robert

How to setup the security based on roles in Organization.

Hi,
How to setup the security based on roles in Organization.
For example:Few users are Manager and a few user are Non Manager .Manager should have access to all work data including Non Manager and Non Manager should access based role.How to setup this? How OBI server identify the user role?
kindly let me know.
Regards.,
CHR

Hi,
You need to have Back End support to achieve this. In Back End you need to create two groups . You need to know what joins has to be made for which group (which is more important) and also make session variable for the userrole (with SQL supporting it). In the BMM layer, we need to put the security join conditions in the 'where clause'.
And make a common report. User loggin in with the respective userid will have userrole and joins assigned in the Back end. And they will be viewing the report according to their access.
Hope this will solve your problem.
Regards
MuRam

How to Setup JMS in Siebel Server

Hi
Currently we have a Requirement to work with queuing System from JMS Queuing
How to Setup the JMS Queuing from Siebel Point of view?
Does JMS Should be Installed in Siebel Server?
Plz Provide Inputs for How to Set up the JMS Queuing Mechanism and Setting up the Queues for Posting and Receiving the Messages from JMS Queues
Thanks & Regards
Rajendra Prasad

Update - it works ! At least I can connect to Mountain Lion (not server) from my iPhone using the VPN Server Configurator app.
Here's what I did :
1) download the app and install
2) setup using the help files on the web page : http://www.greenworldsoft.com/product-vpn-server-help.html
3) at the last stage you need to setup port forwardin on your router
4) under Airport Utility 6.0 you cannot setup ports 500 or 4500 due to BTTM conflicts but setup the other 2 ports (1723 TCP and 1701 UDP), update airport extreme
5) download Airport Utility 5.6 from here : download already extracted utility it is in it's extracted form as is necessary under Mtn Lion (thanks to NetUse Monitor for the download - great app by the way)
6) run 5.6 and setup port forwarding (Advanced-Port Mapping) for the other 2 ports (500 and 4500 UDP), update airport extreme
7) that's it, I was able to connect to the VPN from my iPhone !

How to setup word docs, converted to PDF on local drive with links to a second file at a page

how to setup word docs, converted to PDF on local drive with links to a second file at a page
Need to setup a set of word documents, converted to PDF that has links from one file to a second file at a given page.
I would like to setup a set of pdf documents, on the hard disk of a PC or Mac, that can be open with acrobat pro running on the same computer and have the link jump to, and open in a new window, in acrobat pro, to a given page of a second document in the set.
Is there a way to setup a link in word and the conversion to pdf that will result in a link that is equivalent to the acrobat link type you get when you add a link of the type Go to a page in another document?
Tools-Advanced Editing-Link tool, make a box
Check: Go to page view, Next (Create go to view dialog opens)
Open second document and go to page
Click “Create go to view dialog” to set up link
Result is a link, when view by link properties, with an action of
Go to a page in another document
File: C:\My Documents\second file.pdf
Page: 43
Zoom level: Custom
I got close but did not solve the problem:
I have a version that uses links to a website, using #page=43 at the end of the hyperlink.
That works but will only open to the page if is through the web browser, opening the acrobat reader plugin.
I need to open from a folder on the local harddisk (with relative links), in acrobat pro to the given page of the pdf, on a PC or a Mac.
I could bookmark each page “pagenumberxxx” and jump to the bookmark/page if that would get around some problem
Current Systems in use to create documents with links and view them:
Windows XP SP3
Word 2003 SP3
Acrobat 9 pro version 9.4.4
Or just to view them:
Mac OS 10 Lion version 10.7.4
Acrobat 9 pro version 9.5.1
(note I have limited understanding of Mac’s)
John

No. There seems to be no automated way to do it. You can of course go into the PDF and manually add links after you have converted to PDF, but that is what we want to avoid having to do. We want it to be automatic from the Word doc.

How to setup a password protection in my wireless airPort?

How to setup a password protection to my wireless AirPort?

To configure the AirPort base station for wireless security, you will need to use the AirPort Utility.
AirPort Utility > Select the AirPort > Manual Setup > AirPort > Wireless tab
Wireless Security: <None | WEP (Transitional Security Network) | WPA/WPA2 Personal | WPA2 Personal>
Wireless Password: <enter your desired password>
Verify Password: <reenter your desired password>

How to setup my airport for music streaming

Hi all
I would like to use my iPhone and or iPad to stream music from Pandora and Spotify to my 5.1 (Wired) Speakers.
This question is similiar to this thread https://discussions.apple.com/thread/4153687 however i wanted some clarity and thought best to start a new discussion before pulling my hair out doing this the wrong way.
I have an unused Airport Express basestation (A1408) My current home setup is as follows:
Modem Router: (Netgear DGND3700) N600 Wireless ADSL2+ Dual band Gigabit
Home Theatre Computer: Windows 7 (Cat6 LAN Ethernet connection) NO LAN port
AV Reciever: (Onkyo TX-SR309)
5.1 Speakers: Wired connection to AV Receiver (NOT Airplay capable)
Laptop: Windows 7 (Cat6 LAN Ethernet connection)
My question is how to setup the airport, i understand it can be used to enable airplay streaming of music over the existing WiFi network, as these music streaming apps download and play music concurrently i would not want to have to switch between to two seperate WiFi networks. Should i plug the airport into the HTPC? I would need to purchase a LAN Splitter as the only LAN socket is already taken up with my cat6 connection. OR would i plug it directly into the modem/router? This second option is prefereable.
I have attached an image of my setup below. Any advice would be great, Regards Steve
[URL=http://s1293.photobucket.com/user/steve7677/media/homesetup_zps63eaf61c.jpg.html][IMG]http://i1293.photobucket.com/albums/b599/steve7677/homesetup_zps63eaf61c.jpg[/IMG][/URL]

Still slightly confused, with the link you provided i chose scenario 2. All the other secanrios instructed i connect the airport express to my home stereo or powered speakers. As i dont have an aiport express only an airport extreme there is no audio jack and cannot connect it to the stereo/speakers.
option 2: Connecting to an existing Wi-Fi network as part of a roaming network
Ensure that the AirPort base station Ethernet cables are connected as above
I have done this and conected it via ethernet cat6 to the modem/router
Launch AirPort Utility 6.1. The Assistant will automatically configure the Roaming network
Im using windows 7 and cannot find this version of aiport utility, only 5.6.1 - The message comes up: Aiport utility was unable to find any airport wireless device. I am running this utility on my win7 HTPC (which is connected to my modem/router via cat6 LAN) The airport light is blinkng amber.
would you reccommend a hard reset of the airport? or can you provide a link for AirPort Utility 6.1.?
Regards

How to setup CCMS with Solution Manager

Hi, All
My question is how to setup or satallite connection with Solution manager 4.0 for CCMS alerts
Is that RFC connection using both sites, trusted and satellite system ?
I would like to setup CCMS alerts through Solution manager and R/3 ccms
please anyone has some guide or URL or any idea send me
We are using SAP NW 2004 620 4.6C (SLD=DV,QA,PR) and solution manager 4.0
Thanks in advanced
J
Edited by: issue2008 on Sep 19, 2008 12:13 PM

you need to install CCMS agents(sapccm4x, sapccmsr) on satellite systems & configure them with the central system(solman).

[b]Urgen t- How to setup my isqlpus[/b]

Similar Messages

Maybe you are looking for