B1if Send Mail atom in HTML

Hi,
I want to send a mail body in HTML instead of plain text.
I used the <Body Part> tag instead of <Message> tax\g but not able to received the mail in HTML format.
For ex.
Sales Order Item Details comes in a table format in Mail body.
Please help me on this.
Thanks,
Tushar

Hi Tushar
Try something like this (works for me):
<BodyPart charset="ISO-8859-2" content-type="text/html">
 <xsl:text disable-output-escaping="yes"><![CDATA[</xsl:text>
 <html>
 <head>
 <title>
 Faktura nr <xsl:value-of select="$dnum"/>
 </title>
 </head>
 <body>
 
 Nr zamówienia (faktury): <xsl:value-of select="$dnum"/>
 
 <xsl:apply-templates select="//PCH1"/>
 </body>
 </html>
 <xsl:text disable-output-escaping="yes">]]></xsl:text>
 </BodyPart>
I guess CDATA part is what you miss. Check my charset - you most likely need to adjust it.
Kind regards,
Radek

Similar Messages

B1IF Send Mail Call

Hi All,
I have a scenario step in SAP B1 version 8.8 and the .NET Call was not exposed in that version.
But I need to send out an email notification in my scenario step.
Can someone help me to pass the correct smtp.gmail.com parameters for the send mail call to send the email notification as an alternative for the .NET call atom that is not exposed.
Because I get this error:
com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.0 Must issue a STARTTLS command first. hy8sm14347768wjb.2 - gsmtp
Kind Regards,
Brenden Draper

Hi Radoslaw,
I have chagned my parameters to look like this but still no luck:
Error:
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: javax.mail.MessagingException: Could not connect to SMTP host: localhost
Kind Regards,
Brenden Draper

How to send mails in HTML format from the send mail step of workflow?

Hi,
I have a requirement where I need to send mails in the html format from the send mail step of the workflows.
But what I found out that the html tags are not renderd and as such the output is in plain text.
I know that there is an alternative of using an activity step and use my own custom code from within there,But due to certain business constraints, I need to use the send mail step only.
My SCOT settings are all right.
Please let me know how it can be done.
Thanks,
Samrat.

Samrat,
It can't be done, you have to use your own activity step.
What are these constraints that refrain you from doing that?
Rgds,
Patrick

B1if Sending HTML Email

Is it possible to send HTML emails through a sndEmail atom? If so, how do we configure the atom?

Hello All,
Regarding to the mail adapter, here are some updates:
1. B1i will support sending HTML attachemnt via "Send Email" atom in B1 882 PL09. An example here:
<attachment doc="test.htm" pltype="htm">
<![CDATA[<html>
<head>
<title>Enter the title of your HTML document here</title>
</head>
<body>
Enter the body text of your HTML document here
</body>
</html>]]>
</attachment>
2. In addition, B1i will support sending binary attachment and sending html content in Q1,2013.
Thanks & Best Regards,
Qiaoli

Sender Mail Adapter - html body mail

Hello Everybody,
I'm facing this strange problem:
I receive an e-mail with an XML attachment with a sender mail adapter and I use the PayloadSwapBean to let the attachment be the real payload as explaned in this blog
<a href="/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step:///people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
If I receive mail in text/plain format everything works fine, but as soon as I get an email with an html body (content-type: multipart/alternative; boundary=...) it doesn't any more (In the XI Monitor i still se 2 payloads, but I can only open the one with the attachment).
In this case the mapping is stuck in "scheduled for outbound process" status and the XI queue gets blocked with status "SYSFAIL" giving this error "Access via 'NULL' object reference not possible".
Is there any way to force XI digest also HTML e-mails?
As always, thanks a lot for your help.
Daniele

Thanks Akshay,
this really worked!
Fyi I'm using XIPAYLOAD option. I added in the module chain, before the PayloadSwapBean, a MessageTransformBean with this parameter:
Transform.ContentType - text/plain;charset=uft-8
this way I can also see the massage body in the monitornig.
Hope this will be helpful for someone else.
Regards,
Daniele

Sender Mail Adapter able to retrieve HTML emails?

Hi there,
I stamped over an issue that look like an adapter limitation, would like to hear you opinions.
We´re using a POP3 account configured in a Sender Mail Communication Channel with XIPAYLOAD, with this attempts:
- with or without the Mail Package;
- any type of encoding;
- must keep attachments.
In all of this options always the retrieved email from the POP Server comes in TEXT format.
Does the Mail Adapter support HTML emails?
Does the Mail Adapter support mixed/alternative Content-Type?
>Current version: SAP PI 7.0 SP14
>Mail Server: Lotus Domino 7.0.x
Regards,
Marlo Simon.

Ok,
I´m using the Sender Mail Scenario.
I tried the MessageTransformBean (Transform.ContentType) to force the Content-type to text/html and it made no difference.
Is there any Advanced parameter that would help? No docummentation from SAP on those ones.
I want to keep the original email body, but looks like the adapter only read plain text.
Rgds,
Marlo Simon.
Edited by: Marlo Simon on Feb 5, 2010 2:23 PM

How to send a mail in html format from a send mail workflow node ?

Dear all,
Do you know if it is possible to send an e-mail in HTML format (instead of RAW) from a "send mail" node in a workflow ? ... if "yes", please, let me know.
(I need to do that because I want to use the "href" tag to insert an hyperlink inside the e-mail)
- I haven't found any parameter to specify the format of the e-mail.
- Inside SCOT I tried to change the parameters for the SMTP node... without success.
- I don't want to use a task calling the FM SO_OBJECT_SEND.
Nicolas

Hi Nicolas!
Have you tried to set "Output Format" for "RAW Text" to HTM in SCOT.
If HTM is missing in your dropdown-list, you could check out table SXCONVERT2. Copy the line with category T/format TXT, and change the format from TXT to HTM. The existing function
SX_OBJECT_CONVERT__T.TXT does not need to be changed. Now you should be able to choose HTM in SCOT. You will probably need som HTML-tags in your text to make it look good.
Hope this helps!
Regards
Geir

Sender Mail Adapter consegue ler emails com HTML?

Olá pessoal,
Encontrei um "issue" onde estou deconfiado de uma limitação do Mail Adapter.
Gostaria de ouvir suas opiniões.
O cenário usa um Canal de Comunicação do tipo Mail com XIPAYLOAD em uma caixa POP3, com as seguintes variantes:
- com ou sem Mail Package;
- com ou sem encoding;
- mantendo os anexos.
Independente das variações acima o resultado do email proveniente do POP é TEXTO.
Será que o Mail Adapter suporta mensagens HTML?
Será que o Mail Adapter suporta multipart/alternative Content-Type?
>Versão do PI: SAP PI 7.0 SP14
>Mail Server: Lotus Domino 7.0.x
[]´s
Marlo Simon.

Marlo,
o content type é lido a partir do MIME Header que o Cliente de email que enviou a mensagem cria.
Em geral, mesmo colando um conteudo XML no corpo do email, se o Content Type no Header vier text, o adapter vai interpreta-lo como texto.
Se vc sabe que o conteudo sempre vai ser um XML, existe uma maneira de forcar que o adapter sempre sete o content type como xml, atraves do parametro avançado IMail.AssumeXMLContent. Veja o help do Sender Mail Adapter:
Advanced Mode
To specify additional parameters in the adapter configuration, set the Advanced Mode indicator.
Specify the additional parameter names and parameter values in the table:
● For the security settings, enter values for the receiver party and receiver service here.
● In the table, set the parameter IMail.AssumeXMLContent = true. The text of the message is then interpreted as XML and is copied unchanged to the mail package. If this parameter is not set, the information is copied from the content type of the MIME header. If the type specified there is application/xml or text/xml, the text of the message is copied as XML; otherwise it is copied as text.
Abs,
Henrique.

HTML Mail content in Sender Mail Channel

Hi Experts,
I am doing a PoC using sender mail channel to read an incoming HTML email & take few values from the mail body to send out as proxy message. Settings in my Sender channel are Transport Protocol: IMAP4 & Message Protocol: XIPayload. I have tried the "Use Mail Package" parameter checked & unchecked. If "Use Mail Package" is checked the XML payload I am getting contains the mail body under <Content> tag with all HTML tags.
Without "Use Mail Package" option checked the content is coming as plain text as below.
I have tried adding modules MessageTransformBean & ASMA setting "IMail.AssumeXMLContent=true". But Not able to make the content into mapping ready XML. Is it possible to convert the HTML email body into mapping ready XML or I should use Java or XSLT mapping to work on the HTML mail body?
Thanks in advance for any help.
Regards
Prem A.

Hi Amit,
Thanks Amit. I will try XSLT or Java mapping for this scenario. Appreciate your help.
Regards
Prem A.

Send mail in HTML format

Is it possible with ODISendMail to send mail not in simple text but in HTML?
If no... how can I do that?

If you are looking for capturing the error in the HTML format that can be done by using odioutfile and save the file as HTML and use the required command at the message tab to capture the error .
in the Next step use - odisendmail attach the above html file as attached.

How to send mail in html format in jsp???

Hello everybody,
I have two jsp pages.In one page I have the heading like Date,Transaction.I am retriving data from my second jsp page.And I hae included the second jsp page to my first jsp page.How to send mail this content in html format.
Thanks
Srikant

MimeMessage m = new MimeMessage(session);
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setContent(content, "text/html");this if u need to send a mail content as html

How to send mail in HTML format using SMTP

I want to send mail in HTML format using SMTP.Can anybody please suggest how to do it.Can anybody send me the code.
Thnx.

If you don't know how to send a message using JavaMail see here : http://developer.java.sun.com/developer/onlineTraining/JavaMail/contents.html#JavaMailSending
To send a html format mail you need to set the content type like this (msg is a javax.mail.internet.MimeMessage) :
String subject = "An Email 4 U";
String message = "<HTML><BODY>Here is a link <a href='http://javasoft.com'>Java</a></BODY></HTML>";
msg.setSubject(subject);
msg.setContent(message, "text/html");p.s This isn't really an advanced topic

HTML Tag problem when sending mails through APEX

Hi,
My code for sending mail is below:
DECLARE
l_body CLOB;
l_body_html CLOB;
cursor c2 is
SELECT pn,pdt_name FROM lib_details WHERE a_date BETWEEN to_date(:P13_SDATE,'DD-MON_YYYY') AND to_date(:P13_EDATE,'DD-MON-YYYY');
BEGIN
for c_lib in c2
loop
l_body_html:=l_body_html ||
'<html><body>
ul>
li>'||c_lib.pn||' , '||c_lib.pdt_name||' /li>
/ul>'; p;
l_body_html:=l_body_html ||'</body></html>';
apex_mail.send(
p_to => 'xxxx',
p_from => 'xxxx',
p_body => l_body_html,
p_subj => 'Test Mail');
END;
Gives me the output in the format below:
all the <html><body> tags also comes along with the email, though I get the correct output, what is the problem here?
I am not able to figure this out. Can someone help?
OUTPUT
<html><body>
ul> li>a,b
/ul><html><body>
ul> li>c,d
/ul><html><body>
PLEASE NOTE: I have intentionally removed the starting tags (<) of ul and li so that the post will not be formatted.
Edited by: Suzi on Feb 9, 2012 1:18 PM

>
Gives me the output in the format below:
all the <html><body> tags also comes along with the email, though I get the correct output, what is the problem here?
I am not able to figure this out. Can someone help?For HTML output you need to send it using the <tt>p_body_html</tt> parameter, not <tt>p_body</tt>.
PLEASE NOTE: I have intentionally removed the starting tags (<) of ul and li so that the post will not be formatted.Posting code wrapped in <tt>\...\</tt> tags eliminates the need to resort to these bizarre circumlocutions.

How to attach a document using the Send mail component

Hello,
I would like to know how to attach a document in a email using the Send mail component.
There are these nodes into the atom but I don't know how to use it.
<attachment doc="/ds/grp/doc" pltype="xml">
 <xsl:copy-of select="/vpf:Msg/vpf:Body/vpf:Payload[@Role='S']/vpf:Msg/vpf:Body"/>
 </attachment>
Does anyone know ?
Thank you.

Hello All,
Regarding to the mail adapter, here are some updates:
1. B1i will support sending HTML attachemnt via "Send Email" atom in B1 882 PL09. An example here:
<attachment doc="test.htm" pltype="htm">
<![CDATA[<html>
<head>
 <title>Enter the title of your HTML document here</title>
</head>
<body>
 Enter the body text of your HTML document here
</body>
</html>]]>
</attachment>
2. In addition, B1i will support sending binary attachment and sending html content in Q1,2013.
Thanks & Best Regards,
Qiaoli

Sender Mail Adapter - forcing content as an attachement

Hi all,
We are using the Sender Mail Adapter to pull emails from the inboxes of some users of an exchange server. We use the Mail Package option.
We have noticed that the content of the emails are by-default added as attachments when there are no real attachments to the emails. However the content is not added as an attachment when one or more attachments are present in these emails.
Is there a way of forcing the Sender Mail Adapter to always add the content as an attachment and keeping the other attachments as well? and of course maintain the Mail Package message type as the main payload...?
Many thanks,
Aldo

Hi Stefan,
Thanks for your reply. I am glad to hear that I am wrong again )
In your opinion is it possible to force the Outlook Exchange server to add the content attachment every time? I mean by doing some configuration on it...?
The reason why we would like to do this is because when - in the content tag of a Mail Package message - we have MIME message parts that are of content-type text/html we are having problems in decoding the html back to a readable format.
To do this we use the apache QuotedPrintableCodec Java class.
This works fine when the content type of the message is just text/plain but we get an exception when we try with text/html.
The exception we get is:
org.apache.commons.codec.DecoderException: Invalid URL encoding: not a valid digit (radix 16): 13
I don't know if this is because of the two character sets we have in the payload (utf-8 and iso-8859-1) or if it is for other reasons...
If you could help me figure out how to forward any HTML email to another system in a readable format it would be great.
Thanks for your support,
Aldo

B1if Send Mail atom in HTML

Similar Messages

Maybe you are looking for