Back End PO not gettting created

Hello All,
Whenever SC is approved, BADI BBP_TARGET_OBJTYPE is getting called in which I have to write the custom logic.
If acc assignment category is Assets then I need to create PR in backend which is happening with BADI : BBP_CREATE_BE_RQ_NEW without writing any custom logic in BBP_CREATE_BE_RQ_NEW.
I can see this badi getting triggered in Debugging.
But if acc assignment category is expenses I need to create PO in Backend with badi : BBP_CREATE_BE_PO_NEW.
I did implemented this badi but didnt write any custom logic in it.
I dont see this Badi getting triggered and no PO is also getting created in Backend.
The configuration for define follow on documents is :
Category ID : * Extn Procurement: Always create PR
category ID : XXXX Extn Procurement: PO if item data is complete.
Please suggest.
Thanks
Edited by: santosh.p on Nov 11, 2011 10:05 PM

Hi Matt,
We have a similar issue. We've implemented SRM 7 in classic scenario with ECC 6.
A limit shopping cart is created in SRM and assigned contract limits. The shopping is approved and creates a purchase order in the backend.
1) The contract number is not available in the limits tab on the purchase order. The expectation was that the contract number from the shopping cart shows up here. BAPI_PO_CREATE1 does show that the information is being passed from SRM.
2) The F4 search for contract in SRM does not retrieve contracts from the backend. The search seems to only look for local contracts.
I would appreciate your insight on this issue and if you could share any information that SAP provided.
Thanks,
Hemanth

Similar Messages

Get invoice status from back end (validated/ not validated)

Hi,
How can i find the invoice status from the back end. I am creating a custom form where in need to populate only validated invoices. Is there any proc. for this ? Was looking around for the proc but unable to find one.
Regards
Deepak

Hi all,
I have got the proc. ap_utilities_pkg.get_invoice_status
This proc. takes invoice_id as an input parameter and returns in "UNAPPROVED' if validation or approval fails.
Regards
Deepak

Issue connecting SRM 7.01 to a R/3 4.5B back-end

Guys,
I need your help with the following. We are currently trying to connect a SRM 7.01 system to a R/3 4.5B back-end. We almost got everything working except for a small problem, maybe you can help. We are using the classic scenario and are creating purchase orders in the back-end based on a SRM SC.
First question did anyone successfully connected a SRM 7.01 system to a R/3 4.5B back-end?
The problem we are encountering is as follows. In customizing in SRM I have selected system type R/3_4.5B as the back-end system type in u2018define system landscapeu2019.This causes for the determination of driver FM B45A_PO_CREATE when SRM wants to create the PO in the back-end (BBP_PD_SC_TRANSFER ).This action succeeds because the PO is created in the back-end.
However, the next action of BBP_PD_SC_TRANSFER is to read the data again from the back-end via FM B45A_PO_GETDETAIL. This synchronous call is done in order to update the SC status in SRM and create the linkages in BUS2121. This last action fails, because at the time the get detail Bapi is executed by SRM, the EKKO table in the back-end is not yet up to date and error u2018W5 107 purchase order does not existsu2019 is issued by the BAPI_PO_GETDETAIL in te back-end. This causes the SC in SRM to get status I1112 (error in process). Even though this status is issued in SRM, the PO is available in the back-end without any errors if I check this via ME23.
What I see is if I debug the SC transfer process and wait 1 or 2 seconds between the B45A_PO_CREATE and B45A_PO_GETDETAIL. The issue is not there. In this case it appears that the EKKO table is updated on time in the back-end and the B45A_PO_GETDETAIL can be processed in SRM without problems in order to update the SC status. I get status I1113 follow-on document created in this case.
Thus my conclusion is there is a timing issue when connecting to a R/3 4.5B system. Does anyone know a solution. Our thought goes to a small enhancement in the B45A_PO_GETDETAIL FM creating a timer to wait a second before the execution and fetching of the data. I tried it and it worked. But of course I prefer a standard SAP solution. Did anyone experienced similar behavior? Or knows a standard SAP solution to this problem?
Appreciate your help.
Best regards,
Skander

Hi Surender,
The code changes in this note only apply if the system type is u201CERP_Xu2019u201D. This is not the case over here, we are trying to connect to a R/3 4.5B system.
Some additional info, we have multiple back-ends connected. All ECC back-end function correctly and for these we do not have the problem. Only for the very very old R/3 4.5B system.
Any way I tried the note but no luck. This because of the above.
Thx.

Back end PO from Service Bid Invitations in SRM

Hello Guys:
Currently I am facing an issue in the way SRM system works for Service and Hierarchy Service Items. When I create a PO directly from a SC that has Service Items (with or without hierarchy) on CES the PO is replicate to the back end but if I create a similar PO but this time from a QUOT of a Bid Invitation the system does not create the PO copy on the Backend, Does any one of you know if this is normal? why if I create a PO from the SC then the PO is copied to the back end but not if it is coming from a Bid Invitation??
Thanks
Hugo

Hi,
We don't do Inbound dilevery in Service Procurement. We post service entry.
As I said there should be some setting missed in 'SE_SERVICES_PROCUREMENT' XI scenario. You should trouble shoot it.
As of I remember after posting service entry sheet; confirmation used to get created in SUS.
Regard,
yaniVy
reward if helps

Client Copy back-end system

Hi Guys,
We have made a client copy of the back-end system of SRM (SRM 5.0). Only the back-end and not SRM has been copied.
After replication all the master- and customizing data again to SRM from the 'new' back-end I have found an issue with updating the suppliers.
It seems that I can not remove old business partners from SRM with BUPA_TEST_DELETE if these are used already in SC's. However the new copy of the back-end system has completely different suppliers we need to use in SRM. This causes for an inconsistency with the supplier numbers, as we want to keep the R/3 numbers in SRM.
Does anyone has a good idea how to proceed? That is, how can I remove the business partners (suppliers) in SRM which were used before the client copy of R/3, so that I will be able to completely get all the relevant 'new' vendors from the R/3 system after the client copy.
When I execute BUPA_TEST_DELETE it will end up in error saying the suppliers can not be removed. Do I need to archive all the old documents (SC & PO) before I can remove all vendors in SRM, or is there a way to force the removal of all the business partners from before the back-end client copy?
Thx.
Skander

Hi,
I already figured out how to solve the issue.
For anyone who wants to know how to:
-First clear the vendor groups in the vendor hierarchy; do not renove the root node
-Then run BBPGETVD which will get you the new vendors from the back-end; for me only role LF for suppliers.
-Then run BBPUPDVD which will update all the fields for the old business partner numbers in SRM which were used in documents, and replicated from the old back-end system.
In my case I had to play a litlebit with the setting 'only creditors', to update BP numbers which were not suppliers in the new back-end.
After performing these steps everything should be fine.
So it's perfectly possible to make a client copy of only the back-end system without copying SRM (in the classic scenario that is).
Rgds,
Skander

How do I create a UI for SQL server back end using Dreamweaver wizard

Hi,
I want to test a database driven application which is using SQL server as back end.
To test that I want to create web UI using C#. As I remember in dreamweaver there is a wizard to do it easily.
But I can not find it now. Please let me how to do it
I'm using CS5.
Thanks

flashmark1 wrote:
I want to create web UI using C#. As I remember in dreamweaver there is a wizard to do it easily.But I can not find it now.
Support for ASP.NET was removed from Dreamweaver some time ago (in CS4, I think).
If you want to restore the ASP.NET server behaviors in CS5, you need to install ASPNet_Support.mxp, which can be found in C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS5\configuration\DisabledFeatures in Windows or the similar location in the Applications folder on a Mac.
The server behaviors are no longer officially supported, but they perform the same functionality as in older versions of Dreamweaver.

SRM PO Changes are not transferred to Back end

Hi All,
I have a problem in PO changes.
We are using extended classic scenario. User create PO in the portal and the PO will be transferred to the back end R/3 via RFC. Earlier in 4.7 we the PO's are updated with the changes.
Recently we have upgraded to ECC 6.0. Now the changes are not transferable.
Could any one help me to fix this issue and please give the steps that i need to check for fixing it.
Regards
Pratap J

Hi Thaigo,
Thanks for your input. please go through the below.
These are the table entries in BBP_BACKEND_DEST
Client Logical system Destination                        System type RFC possible Local FI validation
500    EP1CLNT500     EP1CLNT500                         EBP_5.0                  X      0
500    RP1CLN500D     RP1CLNT500DIAG                     R/3_4.70    X                   0
500    RP1CLNT500     RP1CLNT500                         R/3_4.70    X                   0
In the table, it was still 4.70. So it needs to changed to ERP_4.0 ?
Regards
Pratap J

Contract number not transferred to back-end PO? Is this an SAP bug?

System: SRM 4.0 - Classic Scenario
Problem:
Iu2019m creating "limit" carts with reference to ECC back-end contracts. The functionality seems to be available in SRM and I expected it to work in the same way as the "describe requirement" shopping carts (i.e. the contract number added to the shopping cart is transferred to the back-end and the ECC PO is subsequently created with reference to the contract)
However, for u201CLimitu201D carts, I've added the contract to the shopping cart, but it does not get passed to the follow-on ECC back-end PO.
These are steps I am following (end-to-end):
1.     Create contract in ECC (ME31K)
2.     In SRM, add Vendor and Contract Number/Item to preferred vendor list and Release
3.     Create u201CLimitu201D shopping cart with relevant material group and vendor
4.     Search and select contract
5.     Order and Approve shopping cart as required
6.     Identify ECC back-end PO number
7.     Display ECC PO using ME23n, select item and check reference to contract. **Contract number is blank!**
If I check table EKPO the Agreement Number field for the PO is blank. I.e. it has not been transferred from SRM to ECC when the PO is created.
As I mentioned, the contract is transfered for "describe requirement" carts, but not "limit" carts.
I have tested this in another system and I have the same problem. I believe this is a SAP bug. We have raised an OSS note, but awaiting a reply.
Has anyone else experience this issue and can provide any guidance?
Matt

Hi Matt,
We have a similar issue. We've implemented SRM 7 in classic scenario with ECC 6.
A limit shopping cart is created in SRM and assigned contract limits. The shopping is approved and creates a purchase order in the backend.
1) The contract number is not available in the limits tab on the purchase order. The expectation was that the contract number from the shopping cart shows up here. BAPI_PO_CREATE1 does show that the information is being passed from SRM.
2) The F4 search for contract in SRM does not retrieve contracts from the backend. The search seems to only look for local contracts.
I would appreciate your insight on this issue and if you could share any information that SAP provided.
Thanks,
Hemanth

How to create constrained or unconstrained Kerberos and know whether the back end is constrained or unconstrained Kerberos?

Hello Community
    I am considering Kerberos Authenication but there seems to be
2 kinds of Kerberos: constrained and unconstrained.
    Since when creating Kerberos you are only offered things like "Negotiate\Kerberos"
Or "Negotiate" or "Setspn" the question is how do you create a constrained
or unconstrained Kerberos and since the back end has to match how do you
do you know whether the back end uses constrained or unconstrained Kerberos?
    Thank you
    Shabeaut

Kerb is used for one of several scenarios:
- connecting SP to SQL databases, which provides assurances around the connection between the SP service accounts and the SQL service accounts
- connecting SP to external systems (such as SQL databases, which may be used by BCS, Excel, PerformancePoint, PowerPivot, etc).
Constrained Delegation is not necessary for SP to use Kerb when connecting to SQL. it IS necessary for SP to talk to external systems (since Constrained Delegation is also known as "Kerberos with protocol transition", since it's
transitioning a Claims based auth token to a kerberos based auth token).
The difference is a setting in AD's Delegation tab, for the service account that will be collecting the users' login (presumably the webapp), and for the service account that will be performing the double-hop (presumably the service apps)... in addition
to the kerb setting, you also need to specify EXACTLY which endpoints can be reached using the Kerb + CD... unconstrained delegation (the default) allows the Kerb token to be passed anywhere... constrained delegation only allows the Kerb token to be used
by the places you specify (in the delegation tab)... such as the SQL server that the PerformancePoint scorecards will be querying.
Links:
- Microsoft's Kerberos guide : http://www.microsoft.com/en-us/download/details.aspx?id=23176
- more links : http://www.sbrickey.com/Tech/Blog/Post/SharePoint_Troubleshooting_Kerberos_and_External_Data_from_Excel_Services
- some health analyzers to find problems and recommend solutions : http://sdssharepointlibrary.codeplex.com/releases/view/92022
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Creating a connection between the GUI and a program's back end

I have created a program (over 50 classes) and am currently a little confused as to how I should connect the back end of my program (the real functionality) to my front end (the GUI). Currently I am thinking about using a list of event listeners in my back end that will announce when certain events have completed and thus front end can handle the updates accordingly.
But I want to ensure that the back end doesn't "know" about the front end. In other words, I would like to ensure that the back end and the front end are as independent/modular as possible.
Can anyone make some suggestions besides event listeners?
Thanks,
Timmers

From what I am able to ascertain from your post, you would advocate using EventListeners in the back end (in same VM) to inform the GUI of changes?
Is this the commonly accepted way of communicating your back end functionality to your front-end (GUI)?
I've read that all EventListeners are part of a single thread. So what happens if two events occur simulataneously in the back-end. Do those events get queued or do some of them get lost?
Thanks,
Tim
If the back-end changes state asynchronously to the
front-end GUI (ie does work in background threads and
then notifies the front-end when something happens),
then you should make it send events when this happens.
The basic concept is the same for CORBA, RMI, JINI,
or running everything in the local VM.
To do this you define a set of events (or maybe you
can use the java.beans.PropertyChangeEvent) and
listener interfaces. The front-end then registers to
receive events (probably via an addXXXListener()
method in the back-end). You would have to have a
class (or classes) in the front-end that implemented
the event listener interfaces to receive the events.
If you are using a distributed technology (CORBA, RMI,
JINI, ...) the concept is the same, but the event
mechanisms are slightly different.
To notify the back-end of state changes in the
front-end you probably can just do plain old method
calls from the front-end to the back-end.

Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this

Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this is indeed possible?

This forum thread appears to point towards the problem.
Re: Unable to Switch Audio Sync Settings

I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice.

I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice. The hard drive is set set not to go to sleep.

Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

Not able to get a link to the fron-end portal(ess) with back-end sap R\3 AB

Hi,
   In the back-end i.e sap abap-hr , the required data (leave types) are available.But on front-end Portal(ESS) ,the drop-down menu in personal LOA forms shows only two leave types(personal & self-funded leave).i got struck in how to make few in remaining also viewable in the drop-down list.Can anyone help me on this?

Bottom line,
to configure the Leaves on your portal you have to do.
1. Configure the Leave Types and all the customizing on T554S.
    opc. If you want to have quota deduction, and everything else you should check V_T559L, T556C, T556A as well.
2. Configure the Leaves on the Portal. This is done on the IMG path colleague replied:
>Personnel Management
>Employee Self-Service
>Service-Specific Settings
>Working Time
>Leave Request
>Processing Processes
   a. Create the Rule Groups - this step you just create them.
   b. Adjust feature WEBMO - The feature WEBMO is used to select the rule group. Most of the times based on MOLGA and Ctrl. Center.
   c. Define Processing Processes for Each Rule Group - define the processes such as how to record partial day leaves, details on to check PTREQ_HEADER tables for unposted leaves, and how to determine workflow's next agent (more info press F1 on each of these fields)
   d. Specify Processing Processes for Types of Leave - Associate the Leaves from T554S that you want to show on the portal. This includes Absences and ATtendances. Here you define data such as if you are allowed to create leaves on the past, present and future; field customizing, and other details.
Since Time Management is an old part of SAP the F1 documentation is very complete so I really advise you to check.
Also, check http://wiki.sdn.sap.com/wiki/display/ERPHCM/LeaveRequestCustom+Messages
for how to have custom warning messages to show on your leaves.
I hope I have clarified.
Kind Regards,
Bentow.

How to create single user and bulk users from back end in ebs r12?

Hi all,
how to create users from back end in oracle application R with responsibilities?
Thanks in Advance,
Sandeep
Edited by: user2584435 on 17 Nov, 2009 11:14 PM
Edited by: user2584435 on 17 Nov, 2009 11:14 PM

Hi,
I have created user san1 with below mention pkg and added sysadmin with below mention pkg.
BEGIN fnd_user_pkg.CreateUser(x_user_name =>'san',
x_owner =>'CUST',x_unencrypted_password => null,
x_description => 'new_desc2',x_email_address => '',x_fax => '');
end;
DECLARE
v_user_name VARCHAR2(30) := upper('&Enter_User_Name');
BEGIN
fnd_user_pkg.addresp(username => v_user_name
,resp_app => 'SYSADMIN'
,resp_key => 'SYSTEM_ADMINISTRATOR'
,security_group => 'STANDARD'
,description => 'Auto Assignment'
,start_date => SYSDATE - 10
,end_date => SYSDATE + 1000);
END;
Q. I am able to login but dont having any responisibility,why?
Regards
Sandeep.

Re-Create the "Exchange" virtual directory in the "Exchange Back End" Site on Exchange 2013

Sorry for this stupid question.
In IIS, I accidentaly deleted the "Exchange" virtual directory in the "Exchange Back End" Site on Exchange 2013 (Mailbox Role).
What I need to know is the physical path to re-create it.
Thanks

Check http://blogs.technet.com/b/get-exchangehelp/archive/2013/02/07/managing-exchange-2013-iis-virtual-directories-amp-web-applications.aspx

Back End PO not gettting created

Similar Messages

Maybe you are looking for