Backup verification issue!!

Hello,
I just wanted to know as to how much disk space is required for
verification of db backup. The DB size is 90 GB.
Is it that I need 90 GB or less? I am not using software compression.
Kindly suggest.
Thanks,
Sumit

Hello Andreas,
Will 15- 20 GB be enough,for a 90 GB database, even if compression is not on??
Kindly suggest.
Regards,
Sumit

Similar Messages

DB2 Backup Verification

Dear Expert,
We tried backup verification using TSM script and get the result successfully. Now, we plan to perform backup verification using db2 command, our questions are:
1. Which command and option could be used that we can rely on?
2. Which the valid one to verify backup, using TSM or DB2 command?
Thanks in advance.
Kind Regards,
Rudi

Hi,
I tried using command db2adutl as follows:
- db2adutl verify full taken at 20090405103108 database <dbname>, showed the following:
Warning: There are no file spaces created by DB2 on the ADSM server
Warning: No DB2 backup images found in ADSM for any alias.
- db2adutl query full db <dbname> nodename <nodename>, showed the same as above:
Warning: There are no file spaces created by DB2 on the ADSM server
Warning: No DB2 backup images found in ADSM for any alias.
Please advice.
Thanks and Regards,
Rudi

Backup Assistant issue

Yes,Yes,Yes
Please see my posts under the user name T2G3
I have been given many different answers by Verizon online support, verbally by customer service, and by my local store... none of which have fixed the issue.
1) I was told to uninstall then reinstall backup assistant only to be told by my local Verizon store that factory installed software can't be uninstalled.
2) I was told to take my phone to BestBuy to have it reflashed (even though I bought the phone directly from my local Verizon store. BestBuy told me they can only reflash Samsung products.
3) I was told to go to the Backup assistant app under options and dial *73738# to reset BackUp assistant
4) Finally I was told to go thru the process of restoring my phone to facory settings in case I had corrupted software.... but this phone has done this since day 1 when it was taken out of the box and activated by store employees... so how is a restore to the phone's original state going to help???
Maybe if enough of us complain, they won't be able to continue to give piecemeal advice that is unhelpful.....
My phone is the LG Cosmos3

Simkee wrote:
So, I just got a replacement of my Samsung Reality in and I downloaded backup assistant on it. Unfortunately, while the backup assistant is downloaded properly, it will not open on my phone. I has no problem using it on my previous reality, but this one will not work. So, I went online and tried to sync my contacts with my phone, and it's been "syncing" for 20 minutes. This is ridiculous, why isn't it working properly? I have never had this issue before.
Hi Simkee,
I trust that the Backup Assistant issue outlined on your post has been resolved by now. Please keep in mind that some times a bad installation may cause the application to fail. Removing and re-installing application may resolve the issue. If you're still experiencing issues with Backup Assistant please delete application from your phone, power phone off and on, and then re-install the application.

App verification issue

Hello
I am new to forums and iphones. I have downloaded a few apps and have had no problems. However I have recently had an issue with the Tesco Ireland app.
When downloaded, I can start the app. The Tesco splash screen appears for a second or two, Then I get a red screen saying:
VERIFICATION ISSUE
Unlicensed Module(s) detected. You must be a subscriber to use one or more of the modules included with the project.
Please contact Appcelartor support
I have an iphone 5. IOS version 8.1.2. Network: Tesco Mobile.
Has anybody seen or heard of this and is there a solution.
Thanks
Jaydon

jaydon5201 wrote:
Hello
I am new to forums and iphones. I have downloaded a few apps and have had no problems. However I have recently had an issue with the Tesco Ireland app.
When downloaded, I can start the app. The Tesco splash screen appears for a second or two, Then I get a red screen saying:
VERIFICATION ISSUE
Unlicensed Module(s) detected. You must be a subscriber to use one or more of the modules included with the project.
Please contact Appcelartor support
I have an iphone 5. IOS version 8.1.2. Network: Tesco Mobile.
Has anybody seen or heard of this and is there a solution.
Thanks
Jaydon
In bold is the solution contact the app developer or look at their support site.
Not an iphone or Apple issue.

IMessage Verification issues

I have just had my 02 3gs iphone unlocked by 02 and have put my vodafone sim in. Now iMessage will not verify and my old number is greyed out in received in settings. I have changed number on phone settings, added new contact in contacts list and linked it. I have toggle on and off and hard reset. I have toggled auto date and time settings on and off etc. I have changed itunes account password. Still saying verifying with old number. Any help?

tbh no, I'm on Vodafone payg but I see there seems to be a lot of verification issues on these forums and others. Instead of having to wipe is there any other way to get round this?

RMAN Backup restore issue

Hi Guys,
I am running 2 node RAC 11G R2 on windows. I am taking the database backup by issuing the following command:
backup database format='d:\backup\DGtest\%U_DB' include current controlfile spfile plus archivelog ;
(My source sid is "ABC" and I want to restore it into "xyz")
After taking the above backup I have to restore but I am getting the following error while restoring:
I have created the spfile and copy to ASM instance.
I have restore the controlfile into ASM.
But during database restore I am facing the follwoing issues:
RMAN> restore database;
Starting restore at 25-JUN-13
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/abc/datafile/system.261.757702567
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 06/25/2013 09:32:04
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/abc/datafile/system.261.757702567'
RMAN> restore backup;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "backup": expecting one of: "archivelog, channel, check, controlfile, database, datafil
, device, force, from, high, preview, primary, skip readonly, spfile, standby, tablespace, to restore point, until rest
re point, until, validate, ("
RMAN-01007: at line 1 column 9 file: standard input
RMAN>
Any help would be appreciated.

Is your database open? I think it should only be mounted.

TIme Machine verification issue (Drobo and Airport Extreme)

Hello. I recently purchased a Drobo (1st gen, off ebay) to replace a 1TB WD MyBook I was using as a Time Machine backup and Media Server.
The Drobo is connected to an Airport Extreme base station over USB 2.0. My Mac is connected by ethernet to the Airport Extreme.
I followed the instructions on the Drobo website to create a separate 500 gb partition for Time Machine and the rest to accommodate my media collection. http://support.datarobotics.com/app/answers/detail/a_id/67/related/1/session/L2F 2LzEvc2lkLzdta1VHNmZr
The Time Machine backup seems to go OK, taking several hours to backup 160gb of data. Later on in the day, I'll get a message that says:
"Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you."
I've tried redoing the backup 4 or 5 times now. I've tried repairing permissions and the repairing the disk on both the Mac and the Drobo. I've learned that Time Machine Backups to Airdisks aren't officially supported by Apple (Although I never had a problem with my previous hard drive attached to the Airport Extreme, and Drobo say it's fine on their website - "Time Machine with a Drobo device connected to an AirPort Extreme or network attached (NAS) works. Just make sure you have updated Time Capsule or Airport Extreme to firmware 7.3.1 or later."
Every time, after a couple of hours, I get the verification warning and have to delete the backup and start again. I wouldn't mind just going and buying another 500gb external drive to just attach to my Mac, only I now have a separate 500gb volume sitting on my Drobo that I can't do anything with and I can't delete because I don't have anywhere else to transfer the data from my Drobo while I reformat it!
I'm running out of ideas and would love it if someone can offer some advice. Thanks guys!

Hi. Thanks for the response and sorry for the double post in the Airport forum. I'm really just not sure if this is a Time Machine, Airport or Drobo issue.
Everything is updated to the latest versions and I've been looking at the Drobo support site, but all I see is that Drobo is 'supposed' to work with Time Machine over Airport Extreme. However, I've tried everything I can think of and scoured forums over the weekend to try and get to the bottom of this. It's just bizarre that a cheap WD hard disk used to work, and a much more expensive Drobo doesn't.
I've posted the same message to the forums over at the Drobo site, so we'll see what comes of it. I'm not that hopeful. This mysterious black box on my desk seems to have a mind of its own. Even now, even though I'm not reading or writing any data to it, I can hear the Drobo accessing data on the disks and moving things around. I'm not surprised if it's a bit too much for Time Machine to handle. I'm just a bit annoyed that I followed all of the advice from Data Robotics to the letter and it doesn't work, even though it should.
I think I'll just give up and buy a firewire drive (I'm out of USB ports). I'm sure I'll find something I can move onto this redundant 500gb partition. Thanks for your help.

Fusion drive and backup/restore issues

Hi,
since I installed a fusion drive on my early 2008 iMac, consisting of an internal 256GB SSD and an (external FW800) 320GB hard disk, I occassionally run into trouble when system updates are pending. In the past, at worst the time machine backup couldn't be restored and I had to reformat and reinstall the system from scratch - which is not really comfortable!
Currently, running Mountain Lion, when I try to select the startup disk, it complains that Boot-Caches on the Boot-Helper-Partition cannot be created. Nevertheless the system starts fine (and runs fast ;-).
Before upgrading to Mavericks, I would like to know
- if someone else ran into similar problems with fusion drives, when updating/upgrading system software.
- Is it normal that a Time Machine backup cannot be (completely) restore a Fusion drive?
Yes, I know that having the harddisk part of a fusion drive externally is not recommended/supported by Apple - and my Mac is nearly 6 years old, but that would not explain why system updates/restores nearly always fail and sometimes the Time Machine backup drive has a broken file system (needed reformatting)! And I always checked the disks with Disk Utility prior to updating...
Any comments are appreciated.

You can file feedback here. The more who file the more the faster the issues may be fixed.
Also you shoud look on the CCC forums.

Backup notification issue 11GR2 RAC on Windows

Hi all
I have recently set up a full and incremental backup scheduled jobs. I can see in OEM that these have a Target Type of Cluster Database. I was wanting to set up notifications against these jobs, so went into preferences > notifications > rules and created a new rule. In here I selected the type as Cluster Database and went to the jobs tab, upon where I could see no jobs appearing.
I thought that was strange so I tried to query against the mgmt$jobs view to see if I could see my jobs, but I got an error of:
ORA-01722: invalid number
01722. 00000 - "invalid number"
*Cause:
*Action:
I am using the latest version of SQL developer but also get the same at the command line.
I did a bit of research against the error and found that this was a bug in 10g but was fixed in R5 I believe. I am wondering if the jobs are not appearing in the notifications due to it not being able to query this view? Also is anyone else experiencing this issue?
Thanks
Edited by: Kwisatz78 on Jul 14, 2011 7:43 AM

Hello,
I thought that was strange so I tried to query against the mgmt$jobs view to see if I could see my jobs, but I got an error of:
ORA-01722: invalid number
01722. 00000 - "invalid number"
*Cause:
*Action:
I am using the latest version of SQL developer but also get the same at the command line. I'm just talking about the View MGMT$JOBS which gives the error ORA-01722 when you query it, and thus preventing you from checking the Jobs.
This View is just a Query that you may extract DDL from SQL Developer.
The Note of MOS gives the part of the code which doesn't work. So, it may help to create another Query which could let you check the Jobs, and store it as a User-defined Report in SQL Developer.
It's just a suggestion.
Best regards,
Jean-Valentin

Email verification issues

When I try to log in with my Adobe ID, Browserlab pops opens a popup telling me that my email address needs to be verified. Ok, no problem. Click the resend verification button....right? Nope. When I click the "resend" button, all i get is another popup box that says "Authenication failed" with an "Close" button. Can someone at Adobe please tell me how to get my validation email? I really don't want to have to create another Adobe ID.
Thanks!
--ron

Hi Ron,
We were having intermittent issues yesterday with some of the backend servers we rely on for login. Can you please try again, and if you're still having issues, send the Adobe ID you're using directly to me in a private email ( [email protected] ) and we'll look into things from our end.
Thanks,
Mark

Error while doing DB backup on issuing CA migration ?

Hi ALL,
I was trying to do a Issuing CA migration in one of my environment and I am getting the below error while trying to do backup of database
Error when doing dB backup:
After changing registry to point to backup folder and start services error changed to :
Any clue how to fix this error or way I should proceed with the Database Backup?

Hi,
Are there any related error messages in the event logs?
Which way you used to backup CA database, is it CA snap-in or Certutil.exe?
Please try to use the different way than you have already used to backup database to see if it works:
AD CS Migration: Migrating the Certification Authority
http://technet.microsoft.com/en-us/library/9aa53be9-0497-49fa-9ff6-09b72cb69444(v=ws.10)#BKMK_BackUpDB
Best Regards,
Amy Wang

No binaries found for Verification issue in MPR Code Signing Test case

Hi,
We are trying to certify our WebSite Application as Gold Certified and to become Gold Certified Partner. We have run a MPR Test and while verifying the Code Signing test case, it shows that
"No binaries found for verification". But the test case result is
passed. Below I have placed screen shot for the same. We have signed all our Application related DLL's(Page related DLL's. Please let us know about this issue.
Shankar S

Hi Shankar,
To the MPR Tool, it does not appear that you have installed any binaries.
As you mention that your website contains DLLs, these have either not been installed via your MSI package or have already been installed before the test began.
The tool will prompt when to Install, when to perform Primary Functionality, and when to Uninstall.
If your website was already installed prior to beginnign test, you must retest.
As you are applying for Gold level, assure you are testing on Server Core.
Hope this helps,
-Logo

Library backup / management issues

New user, so please pardon the simplicity of the issues:
1. It seems the backup option will only backup to cd/dvd. How do I backup my library to disk? For example, I was thinking of getting a USB hard drive and I'd like to be able to backup the library to it. Is this possible?
2. If I change the location of my library in the preferences, will that actually move the library to the new location?
3. How do I move my library to another computer?
Thanks for the help,
Bob

If you simply want to backup iTunes...
Copy the entire iTunes folder including music to the external drive.
The end.
Export the .xml file and copy that file
Okay but you didn't need to do that.
Just use the existing iTunes library file, especially since the iTunes library.xml file does not contain all the info in the iTunes library.
If you want to move you iTunes library to a new hard drive and use it from there...
1 - Quit iTunes.
2 - Copy the entire iTunes folder including music to the external drive.
3 - Click on the iTunes icon to start it, then immediately press an hold the 4 - Shift key in Windows, Option key in Mac.
5 - iTunes will ask to *Create new library* or *Choose existing library*. Select *Choose existing library* and select the *iTunes library* file in the folder you just moved.
6 - Move the old iTunes folder to the trash but do not empty it.
7 - Restart iTunes normally and verify the songs work. If they do, empty the trash.

Backup assistant Issue... Be Aware!!!!!

I've had the Droid X for about a month now.. I was able to sync my contacts for the first week with backup assistant. I tried to back up my contacts again with B.U.A. but it wouldnt do anything. I called verizon and told them the situation.
Apparently you have to UPDATE your contacts on GMAIL or any synced email account to your phone. Verizons still to this day having issues with B.u.a.
I have to use GMAIL for my contacts. It'll still attempt to connect to backup, but it fails everytime. It only says 14 are synced out of 200.
HOPE THIS HELPS FOR EVERYONE WITH A DROID HAVING ISSUES!!!!

HappyJackDaddy wrote:
Here. I posted the information below on a similar thread, but I think it will help you:
Seems to me that there are "Phone Contacts" and "Google" contacts. If you open up a contact on your phone, tap on Linked Profiles and you'll see whether the contact is a Google contact, a Phone Contact, or both. The contacts that you enter on your phone itself are both. The contacts that you enter online while in your Gmail account are Google contacts only. If you want all your contacts to be backed up to both Google and Backup Assistant, they have to either all be entered manually on your phone or they have to have gotten to your phone in the first place from Backup Assistant. That's because Backup Assistant only backs up Phone contacts, and Google only backs up Google contacts. If a contact is both, it'll be backed up in both places. Sounds like your contacts are backed up at Google because that's where you entered them (or imported them to) in the first place. My advice, if you want them to also be in Backup Assistant, would be to export a CSV file from Gmail and then import that file into Backup Assistant. At least I think you should be able to do that. Hopefully that won't double your contacts! I had the opposite problem. When I got the Droid X I had all contacts from my old phone on BA and they were pulled down to my Droid X, and I wondered why they wouldn't sync and show up on their own in Gmail. I finally exported a CSV from BA and imported it to Google. I was worried it would double my contacts, but it didn't. Worked great, so I'm thinking it should work fine in the opposite direction too.
Very nice info posted here. Thank you.

Account Verification Issues

I am trying to make an order and upon entering my username and password I get this account verification message. It says it will send a code to my email and I have to enter it. This is an annoying new step but ok I can deal with it. But the fact that I have not gotten and codes in my email is a real issue. Yes I have checked my junk mail and I have tried asking for the code again.
All I want to do is make an order. I dont understand why I am being prevented from doing so. It seems like I will have to purchase from another source since Best Buy doesnt want my business online.

Hello Richmoney,
I was disappointed to read that you've been unable to place the order that you planned. Please accept my apology -- creating frustration is not the online experience that we strive to provide.
Using the information that you provided when you signed up for our Community I was able to locate your BestBuy.com account and have initiated a password reset. Please follow the instructions in the email you receive. For best results, I recommend using a new, previously unused password. Please be sure to check your junk email folder for our message, as well as any email filtering rules that you may employ.
Please let me know if you have questions or concerns. Thank you for writing to us!
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Backup verification issue!!

Similar Messages

Maybe you are looking for