Backward Navigation in development components

Hi folks
According to my scenario, i have 3 DC's named A, B, C.
A is master DC and is using B as used DC's in metadata . where B is using DC C. So there is linear dependency between them.
Now my requirement is to navigate from A to C through B.and vice versa.
Default inbound interface plugs of B and C are used to navigate forward by A and B respectively.
Now direct backward navigation is possible up to second level through Out Plug of Interface Controllers i.e from B to A and C to B respectively.
My Requirement is backward navigation from C to A without creating cyclic dependency and using dc C in dc A.
I have more than 3 development components which have to navigate back to dc A.
Thanks in anticipation,
Mandeep Virk

Hi Naga
This is a good piece of information but regarding navigation nothing is provided.
Here author is using ViewContainerUiElement in consumer for other components which i can not use because i have buttons in views on action of which i am preforming some methods and passing context values to other components.
If i use ViewContainerUiElement still i have to navigate using plugout of interface controllers. i can not directly navigate directly coz it will not pass the context to next component.
Any idea
Mandeep Virk

Similar Messages

How to make backwards navigation through slide shows possible?

Hi, I just made my first Encore DVD slide show and spent hours trying to figure out how to do this without a luck. The DVD is one Main Menu with buttons to different slide shows that are all set to manual advance. The end action of each slide show takes to the first image in the next slide show and that was easy and very obvious to achieve in Encore but I didn't find any way to achieve the same for backwards navigation. Does anybody know how to do that.
Will appreciate any help

In case my message wasn't clear, I will try to describe better what I want to achieve.
Currently the viewer starts from a Main menu with 16 buttons linked to 16 slide shows. Starting from the first or any slide show and pressing the next button after an image is displayed, the viewer can see linearly all images in all slide show from that point to the end without ever going to the main menu.
However if the viewer at any point start pressing the previous button on the remote control, he/she can only go to the start of the current slide show and the only way to get to a previous slide show is to use the Main menu button and then jump from there.
Is it possible to make a DVD thata will allow the view to go backwards through different slide shows by pressing the previous button??

Import and Export of Webdyn pro development components

Hi
I am having a problem in importing a development component.
When a component has to be transfered from one NWDS to another NWDS i generally export the development component as a zip file. How do i import the Zip file into other NWDS. I tried the import option but the import is not proper.
Any other way of exporting and importing development components ?
Regards
NagaKishore

Hi Karin,
I faced a similar problem some time back. I unzipped the project and then imported it. But what i found is that in the webdynpro explorer i could not find the nodes for Public parts and so which are specific to DC projects.
Regards
Sidharth

Eventing between 2 Local Development components possible ?

Hello,
I have 2 Local DCs named 'Main' and 'Search'. As the name suggests, Main embeds Search in the "Used Web Dynpro components" and passes (via context mapping) a search parameter to Search. Search will appear as a popup window and display the table results if a match or several matches are found. User then have the option of selecting the one of the result from the table or cancel the search.
Everything works fine till I am trying to fire an event from Search to call the handler in Main. It seems that Search is not able to 'see' the handler that i have created in Main and is not able to close the popup search window.
The tutorial "Dialog Boxes in Web Dynpro Applications" demonstrates how to do eventing within the same component but I will like to know how can I do the above between 2 different Local Development components. Does anyone have a solution or idea to this ? Thank you very much.
from
Kwok Wei

Hi,
I think with that search parameter you can also pass on an extra parameter say <b>win</b> of type <b>IWDWindow</b> containing the reference of the window created in the main view.
In the popup window on action close of the window, instead of calling the handler you can directly give
win.close();
win.destroy();
regards,
Mahesh K.

How to use common resource bundle across all the development components ?

Hi,
I am working on SAP NetWeaver Developer Studio - JAVA
How to use common resource bundle across all the development components ?
Description :
I have a requirement of creating a resource bundle (resource.properties) and use that common resource bundle in all the development components.
Can we create a development component (war and ear both) and create only resource.properties in this development component( DC ) and create the dependency of the same DC in all the other DCs ?
Thanks,
Neha

Hello Neha
This question is more NWDS related.
You may have a better chance of someone answering the thread under
SAP Netweaver -> SAP NetWeaver Development Infrastructure (NWDI, formerly known as JDI) forum
Thanks
Kenny

Backwards Navigation and automatic marking of "incomplete"

Hello and thank you for your help in advance.
Here is the scenario: a learner is on a question and they click the Back button and because we want them to be allowed to refer back to the material before answering the question OR they click the slide back button on the skin's playbar to refer back (either way it is the same error)....after referring back to the content, they have the answer in mind so they navigate back to the question and they are unable to answer it now because it says:
Furthermore, here are our current quiz preferences settings we have, you will notice that "Allow Backwards Navigation" IS checked off, I'm not sure what to do
The programming remedy you would think is that the "Allow backward movement" check mark does nothing but prompt you to hide the back buttons or display them, it does nothing in the background in regards to ignoring incomplete questions. This check mark needs to also ignore incomplete questions when navigated away from the slide.

The Quiz scope concept I was not aware of, thanks for that!
I just have one final hangup to get thist to work. I found a solution on a previous thread where you helped someone, their workaround is as follows:
"I put a white button with white frame on a white background before the first quiz slide, and make it report to lms as 0 points, so it's a "hidden" button that does nothing. Now the user will never go out of "quiz scope".
I want to put this invisible button on the very first slide so that they will never go out of quiz scope no matter where they navigate, however I do not want it to add to the Quiz results total on the Quiz results slide (when I uncheck "Add to total" under Reporting for the Button's properties is still adds it to the total:
Also, I do not want it to add to the total number of questions on the progress indicator (the first question still says Question 2 of 4 when it should be the 1st question), finally I am not sure how this user above changed it to report to LMS as 0 points, when I try to change the points from 1 to 0 it always defaults back to 1, I also have unchecked "Report answers". Once this is resolved the company will be full of happy Captivate users.
Thank you for your help!

Any factors that Development Components cannot be imported?

Dear all experts,
I am new to Webdynpro development. I have tried to open a webdynpro program developed by other developer before.
1. Copy the source code under my documents and settings, e.g. d:\Documents and Settings\xxx\.dtc\LocalDevelopment\DCs\com.xxx.xxx
2. Select File > Import and then select Development Components and logon my account to server. Supposing the component would be appeared under Local as usual. However, this time, I cannot see the component imported.
May I know do you have any idea for about? Thank you very much!
Best regards,
Anne

Hi,
You can export the DC present in the developer system and then import that .sca file into your System.
Then refresh the Developement Component.
Now right click the DCs available and select Create Project if it is available.
In the next step right click on the DC and select sync Used DCs.
Then Build and Deploy the DCs.
If you have any problem (errors) while Syncing or Building check the error log for Missing DCs.
For any guidance on importing and exporting the Development Component follow this link.
/people/srinivasan.subbiah/blog/2008/03/21/team-oriented-development-without-remote-nwdi-in-ce-71
Note: The Developement Configuration package should be same in both the systems.
Regards,
Gayathri.

Active and inactive development Components

Hi,
What are active and inactive development Components ?
Thanks,
sowmya

Hi,
Basically in the Development Configuration you will be able to see 2 types of development component.
1)Active
2)Inactive
Whenever user needs to change any coding or development then he needs to do this in the inactive DC.
After check in the activity it will sync with the Active DC.So that means the Active DC is contained data after the check in activity.Both are sync.We are not able to do any changes in active DC.
This is the restriction by sap
Thanks
Kanai

Import the existig Development Components using NWDS

Hello Portal Developers,
I have a query and need your help to resolve it.
I would like to import the existing Developed Components (DCs) from portal.
How can it be done? Can i use the NWDS to import the existing DCs.
Your earlier help will be very much Appriciated.
Thanks in Advance
Regards
Srinivas

Hi srinivas reddy ,
You must have the NWDI for importing the existing DC's into your NWDS. If u don't have NWDI configured, you can not get that back to NWDS. Instead you can open the DC which you deployed before and modify them and redeply.
reward points if useful
Thanks
Suresh

Delete development components from shared repository

We have some test models in the shared repository that need to be cleaned up. In visual composer, how can you delete development components from the shared repository?

Hi,
it is possible to delete a whole DC from DTR by commands:
http://help.sap.com/saphelp_nw70/helpdata/en/43/cf7e3f15e60a98e10000000a1553f6/frameset.htm
Deletion of single models falls out of official support.
Regards
Anja

API for getting the build date of development components

Hello ,
we are changing the format of the <about> screen of our application. We show the version of the main development components that are the part of our application.
For the version date of the development components, we were earlier showing the deployment date. However we now plan to change it to their build date. We need to know if there is any API to find the build date of the development components.
Thanks alot in advance for helping!

Hi do you want all the dates from the back date to sysdate or only the particular back date
SQL> select sysdate from dual;
SYSDATE
22-JUN-09
SQL> select sysdate-10 from dual;
SYSDATE-1
12-JUN-09or if you want all the back dates starting from one particular then
SQL> select sysdate-10+level from dual
2 connect by level<=10;
SYSDATE-1
13-JUN-09
14-JUN-09
15-JUN-09
16-JUN-09
17-JUN-09
18-JUN-09
19-JUN-09
20-JUN-09
21-JUN-09
22-JUN-09
10 rows selected.Edited by: oracle_for_dude on Jun 22, 2009 12:11 PM

Development Components

Hi,
Can you please tell me answers for foll. questions.
What are the advantages of creating development components ?
What are active and inactive development Components ?
What are the mandatory libraries required for development Components ?
Thanks in Advance,
Ravi Kiran

Hi
check the links
http://help.sap.com/saphelp_nw04/helpdata/en/d0/b7fd3a2314fb4992b58c90fd4d4183/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1c/bca99c220c0e45a1cae3c4cccf4346/frameset.htm
and for more search in SDN you would certainly get more doc . and even in the ELEARNING catalogs
search for the DC creation .
murali

The Navigator in "Develop" mode in Lightroom 5 doesn't show current photo

In Library mode, the Navigator does what I'm used to from previous versions of Lightroom -- it shows a preview of the currently selected photo. However, when I go into "Develop" mode, the Navigator chooses another photo from the collection I'm working on (always the same one, it seems) and shows that one. This is frustrating, because I like to use the Navigator in Develop mode to see previews of an edit I'm working on. It's also just nonsensical that it shows a different photo.
Is this a setting I need to set somewhere, or a bug?
Thanks!

john27rg wrote:
Michelle, where did you find that option? I have this problem as well with LR5, but can't find that option.
Edit > Preferences > Interface tab,
Checkbox in "Filmstrip" section

Web Dynpro Development Components missing for MSS

Hey Guys...
The following BPs are installed on our landscape:
○       Business Package for Manager Self-Service (SAP ERP) 1.3
○       Business Package for Common Parts (SAP ERP) 1.3
○       Business Package for Project Self-Service (SAP ERP) 1.0
○       Business Package for HR Administrator (SAP ERP) 1.1
The ECC is EHP 3, SP 14 and EP is 7.0 SP 14
I've been trying to set up iViews for MSS but I see that all Web Dynpro Applications specified in the technical information of iViews are missing. I searched for Web Dynpro Development Components in the EP and all MSS related WDC are just missing.
According to SAP Help Documentation (http://help.sap.com/erp2005_ehp_03/helpdata/en/76/77594d165144a1a9bff9aae1e26b26/content.htm) these are required:
Web Dynpro Development Components:
○       PCUI_GP
○       MSS
○       SAP_PSS
Where can I get them??? Is it possible our basis didn't install the right Business Package?

Seems you have got right business packages, though have a look at note [1303362|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1303362] to confirm dependency.
"but I see that all Web Dynpro Applications specified in the technical information of iViews are missing."
Well this could be because of errorsome business package deployment, you can still check list of deployed components from SDM and if there is any error log for deployement, you should try to deploy them again(update existing components).
Hope this helps. If not then probably you should go Content Admin - WebDynpro and see list of application listed under MSS.. if those referred applications are available then try to execute them.
And last one.. if you "think" they wont run.. or you have actually tried to run MSS and none of applications are working. you should be able to run standard package without any major configuration chanegs.. so give it a go.. and see if you encounter any error.
Cheers

Management of Beanu00B4s Relationships in Development Components

Hi,
I´m developing a project where I need to use DC for reutilization. I have already created two DC, one DC that contain an entity bean call Improvement and other DC that contain an entity bean call LongText that has the Improvement primary key like a foreign key. So, I need to establish an one to many relationships between the entity beans that are in different development components, but I created the LongText public parts and I did add them to the Improvement Used DCs, and I did create the relationship between the two of them in the ejb-jar.xml of the Improvement DC because I need it to be unidirectional, but doesn´t appear for add the relationship in the persistent.xml.
I´m using the SAP Developer Studio 2.0 SP13.
If someone know what can be the error, I will we grateful.
Regards

Hi Experts,
Could you please reply any one.
Thanks in advance.
Regards,
Jyothi

Backward Navigation in development components

Similar Messages

Maybe you are looking for