Bad argument openProject when running SaveAsProjectTemplate.jsx
Hi
I have created a RoboHelp 8 project template and rolled it out to the team for use in an upcoming project.
Six authors have been able to load the project then, using the Script Explorer, have run the SaveAsProjectTemplate.jsx script to make it a project template. One author has attempted to run this script and been confronted with the error Bad argument openProject once they accepted the default location.
The installation process was identical for all seven machines, it activated/registered without a hitch and all available updates have been run on the seven machines (we are all on 8.0.2.208).
Does anybody know, please, why this error might be occuring on just one machine?
Many thanks
Nigel
Hi Nigel and welcome to the RH forums. Things to try include:
Running one of the pre-installed scripts (e.g. Word Count).
Reinstalling the Extend Script add on.
The RoboColum(n)
@robocolumn
Colum McAndrew
Similar Messages
-
Syntax error when running ActionFileToXML.jsx or trying to install xtools
I have an action set (actually a few) that I would REALLY love to rename but the actions are calling "sub" actions within the action set which means that the action set name is hard-coded into the actions in many places.
Originally, I tried to edit my actions with a hex editor to try and change the name and references but realised I was limited to renaming with the same number of characters unless I parsed the file first... so I gave up on that. Then I came across Xbytor's awesome ActionFileToXML script, but I get a syntax error when running both the To and From XML scripts at root.@date = Stdlib.toISODateString();
I then figured I would go straight for the latest xtools instead but when running the install (in CS2) I get a rather long syntax error and so the install fails. The script mentioned that there is a log file that I should email to Xbytor, but I figured I would post here instead of bothering him directly so he has more of a choice about whether he wants to be bothered by me Or maybe someone else can answer if it is a stupid newbie problem.
Thanks heaps!
Gab
ETA: I'm running CS2 on XP if that makes any difference. If so, I may be able to use a friend's Mac with CS3.Thanks for the quick (and very useful) response!
I made the changes to the mentioned files and the scripts were able to
progress further, but only until the next E4X syntax (node.@key=key;).
Rather than continue to hack at your code, I figured I should downgrade to a
previous version (as you also suggested). I initially tried v1.5 and the
ActionFileToXML worked perfectly but ActionFileFromXML failed with an
illegal argument error.
Before looking too deeply into the error, I figured I would try v1.6 and
found that both the scripts were able to complete successfully. The
resulting atn file has a couple of bugs in it (such as "Set current layer"
having a knockout setting of which causes the action to crash),
but nothing that I can't just copy back from my original script.
Thanks HEAPS for your assistance and for the awesome scripts in the first
place! Extremely greatly appreciated! -
"The request failed with HTTP Status 400: Bad Request." when running reports
Hi,
I installed reporting services and the install went fine. The Reporting Services are located on a different server. I can see all the reports in SCCM but when I try to run them I get the "400" error with the following details:
System.Net.WebException
The request failed with HTTP status 400: Bad Request.
Stack Trace:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.ReportExecutionService.LoadReport2(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.<>c__DisplayClass2.<LoadReport>b__0()
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I can open the URL from the SCCM server but when I select a report I am unable to select any report options if available. If no options are availble the report just doesn't run, I don't get and error if I select "View Report" mutiple
times.
If I connect to the Reporting Services site on the computer where it is installed all the reports run fine.
One thing I have noticed is that when I try to change or add a role assignment for Reporting Services the edited account always reverts back to the default settings and the added Domain user is dropped.
ThanksI reviewed the topic and found a couple of steps I missed the first time around. I had to "Configure Reports to Use Report Builder 3.0 and setting the "Log on Locally" permission.
I then uninstalled the role and reinstalled it. I am still getting the 400 error.
When I inspected the SmsAdminUI.log I noticed the Error on the last line 2151811598 (it repeats in the log). I couldn't find anything specific related to it. By reading a few "related" Internet posts I came accross a intial setup
blog that noted some WMI firewall execptions (Async-in, DCOM-in and WMI-in) as require so I checked and they were not allowed on the SCCM server so I allowed them and tested with the same result. I turned them off again.
Here is the tail end of the SmsAdminUI.log
[19, PID:2684][01/24/2013 16:08:29] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[4, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[15, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[1, PID:2684][01/24/2013 19:06:02] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n
[1, PID:2684][01/24/2013 23:39:14] :System.NullReferenceException\r\nObject reference not set to an instance of an object.\r\n at Microsoft.ConfigurationManagement.AdminConsole.SmsCustomDialog.get_LocaleIndependentIdentifier()
at Microsoft.ConfigurationManagement.AdminConsole.ShowDialogTaskHandler.DoTask(NavigationModelNodeBase node, SccmTaskConfiguration sccmTask, PropertyDataUpdated dataUpdatedDelegate, Boolean readOnly)\r\n
[1, PID:5008][01/25/2013 20:48:00] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n -
Error when running script to reset size - bad argument gettokenmanager
Hello,
I use RoboHelp HTML 8 (currently on 8.0.2.208) and have a project with a number of user interface images that are going to be translated. The translated images will likely be of different size, so I need to have a fast way of reseting all the image sizes in my project.
I discovered Chasnikov's script "reset all images" on the thread:
http://forums.adobe.com/message/2128583#2128583
which seems just perfect for my situation.
Not wanting to test this on my real project, I made a copy in a different location and tested out the script. The script ran for a while, but then abruptly ended with the following message:
Bad argument getTokenManager
In looking at the output window it seemed like it stopped in the middle of a topic after going through a number of topics. For my test situation, I only replaced a few graphics in a few topics and when I checked this limited sample, they all seemed to be correctly resized.
However, my concern is that if I use this script in my real project, it won't actually resize all of the images.
Any ideas why the script is terminating abruptly?
By the way, I did find a similar question about this error message in the thread http://forums.adobe.com/message/2551147
however, the solution to add the line msg(filepath); to the script resulted in another error -- RH did not recognize 'msg' as a valid command.
Thanks, RoseThanks Willam for the advice. In the meantime I realized that there was something wrong with my project--because the word count script also gave me the same error message -- so I ran it on another version of the project and it was just fine.
There are two questions that your response brings to mind:
1. How are you able to see the line numbers in the script? When I edit the script, it opens in Notepad and I can't turn on line numbers. I have discovered, that if I have word wrap off, I can use Goto and specifiy a line number to go to. Are you using a different text editor?
2. The reset size script doesn't announce that it is finished. It just seems to stop displaying things in the output window, but it doesn't give me a message to say it has finished. Can you recommend some code I could add to the reset size script to output that it has finished processing sucessfully?
Thanks in advance.
Rose -
Bad load arguments supplied when starting up the Reports Server
Dear All,
In report60\server\<filename>.ora
Following were the contents :
maxconnect=20
cachedir="d:\Oracle\806\REPORT60\server\cache"
cachesize=50
minengine=0
initengine=0
maxengine=1
maxidle=30
security=1
englife=50
We chnaged it to
maxconnect=20
cachedir="d:\Oracle\806\REPORT60\server\cache"
cachesize=50
minengine=1
initengine=0
maxengine=5
maxidle=30
security=1
englife=50
We imideatly got result we checked it put it on live application server.
Everything was smooth but next day we got calls/email from user saying report were slow. when we checked the windows process on application server rwmts60 was occuping 50% of memory so we killed that process. We restrarted the report service but was unable to restart.Then we saw the report log as follows :
*** 2008-07-29 17:36:51 -- Server started up an engine. (Rep60_WEBDB-01)
*** 2008-07-29 17:36:53 -- Server engine crashed. (Rep60_WEBDB-01)
*** 2008-07-29 17:38:18 -- Server started up an engine. (Rep60_WEBDB-01)
*** 2008-07-29 18:39:44 -- Server shutting down an engine. (Rep60_WEBDB-01)
*** 2008-07-30 09:13:19 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** 2008-07-30 09:15:24 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** 2008-07-30 09:17:29 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** 2008-07-30 09:19:34 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** Bad load arguments supplied when starting up the Reports Server
*** Bad load arguments supplied when starting up the Reports Server
*** Bad load arguments supplied when starting up the Reports Server
*** Bad load arguments supplied when starting up the Reports Server
then we changed back our ora file to
maxconnect=20
cachedir="d:\Oracle\806\REPORT60\server\cache"
cachesize=50
minengine=0
maxengine=1
initengine=0
maxidle=30
security=1
englife=50
And restarted the service which restarted suceesfully.
My question is i had changed maxengine=5 and minengine=1 on 20- JUL-2008 around 16:00 .Did this happen b'coz of this 2 parameters.
Kindly advice.
Thanking You in anticipation.
Best Regards,
DevendraHello Mahendraji,
Thanks for your reply.
I may ask some basic question please accomodate me.
<<$RACLE_HOME\reports\conf\apple_report.conf>>
I have Application server 9i version 1.0.2.0.0 (isuite).
I have installed in D drive
In this drive a folder d:\orcale is created.
Inside of this i don't have any folder called "reports"
i have folder called "806"
\\webdb-01\D-Drive\Oracle\806
Inside of which i have folder "report60"
\\webdb-01\D-Drive\Oracle\806\REPORT60
Inside of which i have folder "SERVER"
\\webdb-01\D-Drive\Oracle\806\REPORT60\SERVER
In which i found "Rep60_WEBDB-01.ora" , "Rep60_WEBDB-01.log" and "cgicmd.dat"
and 2 folders "CACHE" and "security".
I am confused as you said that the file name should be Rep60_WEBDB-01.CONF but i have Rep60_WEBDB-01.ora are they one and the same . If yes is the extension b'coz i have older version of 9i i.e 1.0.2.0.0 (isuite).
if no where i how i can search this .
This Rep60_WEBDB-01.ora file doesnot have parameter "engineResponseTimeOut" if i add it will it work.
Your explanation regarding "engineResponseTimeOut" is clear.
Maximum Time taken by our report is 20 minutes. But sometimes when report hangs or SQL takes more time than normal due to the environment so the max time might change to 25 or 30 minutes in such a case should we keep it at 45 minutes to avoid any unneccessary termination.
<<Note:
It is always better to run batch reports on a separate server with different engineResponseTimeOut values. Do not submit interactive and batch reports to same server.>>
If i create a seperate application server how can i send reports requested by user to batch in this seperrate server.
What should be the criteria of report to be redirected to seperate server?
What do mean by "submit interactive" and "submit batch"
My interpretation is when we click on submit query button it is "submit interactive" is it correct.
I am not clear about "submit batch"
I know there might be some silly questions but please do accomodate.
Kindly advice.
Thanks.
Regards,
Devendra Shelke -
Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.
I've never had any problems with mine ever. The only freeze I've had was from a file I recorded on tivo, cut commericals out in movie maker and then re-encoded to the lowest possible bit rate that that zens nati've resolution supports. Try turning your sensitivity in the touch pad down. Sometimes if you have it up to high you may have a chance of doing that (although I have only had slow response, instead of a freeze by doing that).
You also have to compare to all of the other products out there: Ipod and Zune are a lot worse with pathetic little problems (annoyances). I didn't pay for tech support? -
Hizzing / bad sound when running from battery power (Ups)?:
Why is my computer (Imac) emitting a hizzing sound when running from the UPS (battery)? I am testing a offline UPS type: POWERWARE Eaton Protection Station UPS 500VA 250W. My Imac is suppose to use max 200 watts of electrity (Imac 24 inch. intel 2.8 Ghz, 4 GB memory). When running from AC there is no sound. When testing (pulling out the cord on the UPS the Imac starts emitting a disturbing hizz / sound)???
I solved it my self. It was OK (no buzz and fuzz) when it was plugged in (when the electicity line was down once and I was running on the UPS battery).....
-
Hi
Creating an application to analyze .dmp files - all working well except this odd issue
If I open command prompt and enter this command:-
kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v"
Then it works and shows me all the output I need (shown at bottom of post)
If I run same command in VB.net using following code - then it doesn't give the same output - the bits I need at the end created by the !analyze -v switch don't appear
Any ideas why it is not seeing the switch correctly - setting a breakpoint and checking contents of startinfo seems to be showing correct cmd line i.e. "kd -z C:\windows\minidump\042414-24632-01.dmp -c "!analyze –v;q""
Dim myprocess As New Process()
myprocess.StartInfo.FileName = "C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"
myprocess.StartInfo.Arguments = "-z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
myprocess.StartInfo.UseShellExecute = False
myprocess.StartInfo.RedirectStandardOutput = True
myprocess.StartInfo.CreateNoWindow = True
myprocess.Start()
TextBox1.AppendText(myprocess.StandardOutput.ReadToEnd())
Output when run from cmd prompt:-
C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86>kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v;q"
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
Machine Name:
Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
System Uptime: 0 days 0:00:38.703
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntkrnlpa The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {afa99150, 0, 88c557d7, 0}
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
*** WARNING: Unable to verify timestamp for HipShieldK.sys
*** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : mfehidk.sys ( mfehidk+377d7 )
Followup: MachineOwner
1: kd> kd: Reading initial command '!analyze -v;q'
* Bugcheck Analysis *
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: afa99150, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 88c557d7, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)
Debugging Details:
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.
MODULE_NAME: mfehidk
FAULTING_MODULE: 82e3e000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4d2e1e3e
READ_ADDRESS: GetPointerFromAddress: unable to read from 00000000
GetPointerFromAddress: unable to read from 00000000
unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPagedPoolEnd
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
afa99150
FAULTING_IP:
mfehidk+377d7
88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) x86fre
LAST_CONTROL_TRANSFER: from 82e7eaa8 to 82ecb879
STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
ad0baf90 82e7eaa8 00000000 afa99150 00000000 nt+0x8d879
ad0bafa8 88c557d7 badb0d00 00000000 88c4ceb0 nt+0x40aa8
ad0bb040 88c4f97d 001a99b0 afa91000 00000000 mfehidk+0x377d7
ad0bb090 88c52b16 00770220 ad0bb0fc 00000010 mfehidk+0x3197d
ad0bb0bc 98d5fb73 ae770220 ad0bb0fc 00000010 mfehidk+0x34b16
ad0bb140 98d5fc43 ae738c30 98d6b62a aace7220 HipShieldK+0xb73
ad0bb168 98d6b882 ad0bb19c 00000000 98d77b44 HipShieldK+0xc43
ad0bb1b8 98d631a9 00000bd4 0000102c ad0bb208 HipShieldK+0xc882
ad0bb330 88c47795 00000bd4 0000102c ad0bb401 HipShieldK+0x41a9
ad0bb400 88c22b57 0000102c ad0bb460 85b3dee0 mfehidk+0x29795
ad0bb41c 88c232c6 ad0bb430 0000000c 8c4b6ce0 mfehidk+0x4b57
ad0bb43c 830a5acb adb6b9b8 0000102c ad0bb460 mfehidk+0x52c6
ad0bb4f4 830adaf8 adb16030 01b6b9b8 ad0bb550 nt+0x267acb
ad0bbc00 82e7b8c6 038ae710 038ae6ec 02000000 nt+0x26faf8
ad0bbc34 77a470f4 badb0d00 038ae3dc 00000000 nt+0x3d8c6
ad0bbc38 badb0d00 038ae3dc 00000000 00000000 0x77a470f4
ad0bbc3c 038ae3dc 00000000 00000000 00000000 0xbadb0d00
ad0bbc40 00000000 00000000 00000000 00000000 0x38ae3dc
STACK_COMMAND: kb
FOLLOWUP_IP:
mfehidk+377d7
88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: mfehidk+377d7
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: mfehidk.sys
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:wrong_symbols
FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}
Followup: MachineOwner
quit:
output when run in my app:-
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
Machine Name:
Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
System Uptime: 0 days 0:00:38.703
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntkrnlpa The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {afa99150, 0, 88c557d7, 0}
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
*** WARNING: Unable to verify timestamp for HipShieldK.sys
*** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : mfehidk.sys ( mfehidk+377d7 )
Followup: MachineOwner
Darren RoseTry it by opening the Cmd prompt as the actual process and passing the Filename and its arguments as the arguments of the Cmd process. If you notice there is a "-C" before the Filename and Arguments in this example. The "-C"
tells the cmd to execute the commands and then close itself. You can also use a "-K" which tells the cmd to execute the commands and keep itself open. Being you are not showing the cmd window you don`t want to keep it opened because the
user can`t close it so, that is why i used "-C".
I don`t have the program so, you can just experiment to see what it does. Maybe you should try using "-K" and show the cmd window by commenting out the CreateNoWindow line so you can see what is in the cmd window while testing.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim filepath As String = """C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"""
Dim args As String = " -z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
Dim p As New Process
With p.StartInfo
.FileName = "cmd.exe"
.Arguments = "-c " & filepath & args
.UseShellExecute = False
.CreateNoWindow = True
.RedirectStandardOutput = True
End With
p.Start()
TextBox1.Text = p.StandardOutput.ReadToEnd
End Sub
If you say it can`t be done then i`ll try it -
ORA-29261: bad argument using UTL_HTTP.REQUEST_PIECES
I am running Oracle 10gR2.
I keep getting ORA-29261: bad argument when setting the proxy either by the UTL_HTTP.SET_PROXY or UTL_HTTP.REQUEST_PIECES code. I have searched this forum and found no resolutions. I have set this proxy in the browser and it works fine. The following are excerpts of my code:
Begin
utl_http.set_proxy('http://myproxy/theProxyFile');
End;The error is:
ORA-29261: bad argument
ORA-06512: at "SYS.UTL_HTTP", line 22
ORA-06512: at "SYS.UTL_HTTP", line 888
ORA-06512: at line 2
I get the same error when trying to set the proxy via UTL_HTTP.REQUEST_PIECES.
Thanks in advance,
Becky
Edited by: Becky Eisen on Aug 8, 2011 10:15 AM
Edited by: Becky Eisen on Aug 8, 2011 10:21 AMAfter submitting this, I realized that I needed to look in the Proxy file for the actual proxy! Duh.
-
I'm working through Structure and Interpretation of Computer Programs, and I've run into some behaviour I don't understand.
The code:
(define (average x y)
(/ (+ x y) 2))
(define (refine r g)
(print "["r"]["g"]")
(average (/ r g) g))
(define (sqrt-guess rad guess)
(define oldguess guess)
(define guess (refine rad guess)) # problem line
(if (= oldguess guess)
guess
(sqrt-guess rad guess)))
It seems that when refine is called in the problem line the second argument is not being 'received' as I would expect.
#;1> (sqrt-guess 9 1)
[9][#<unspecified>]
Error: (/) bad argument type: #<unspecified>
Call history:
<syntax> (sqrt-guess 9 1)
<eval> (sqrt-guess 9 1)
<eval> [sqrt-guess] (refine r g)
<eval> [refine] (print "[" r "][" g "]")
<eval> [refine] (average (/ r g) g)
<eval> [refine] (/ r g) <--
I tried (define guess (refine rad oldguess)), same outcome. At this point, I figure it's some consequence of applicative-order processing that I don't understand. But things got more interesting when I added a standalone call to refine:
(define (sqrt-guess rad guess)
(define oldguess guess)
(refine rad oldguess) # new line
(define guess (refine rad oldguess)) # (define guess (refine rad guess)) also works
(if (= oldguess guess)
guess
(sqrt-guess rad guess)))
Now the code runs as expected and returns an answer. However, if I change "oldguess" to "guess" in the first refine line:
(define (sqrt-guess rad guess)
(define oldguess guess)
(refine rad guess)
(define guess (refine rad oldguess)) # (define guess (refine rad guess)) also fails
(if (= oldguess guess)
guess
(sqrt-guess rad guess)))
the original error re-occurrs. In every case the 'standalone' call to refine gets both arguments as expected; it's the one in "define guess" that has issues.
I'm not looking for help fixing the code, but for an explanation/breakdown of what's going on. Thanks.
Last edited by alphaniner (2013-06-20 13:20:34)I believe that redefining 'guess' is confusing the compiler.
You're right. That was my first thought too, but I swear I tried something like (define foo (refine rad guess)) which didn't work either. I just tried it again and it works just fine.
I haven't been introduced to let yet, and the way it's parenthesized I don't really understand how it works. I think of let in bash terms (ie. let x++) so maybe that's my problem. Anyway, I'll wait 'till I come across it in the text.
Using your suggestions I got it to work using only stuff I know:
(define (sqrt-guess rad guess)
(define newguess (refine rad guess))
(if (= newguess guess)
guess
(sqrt-guess rad newguess)))
Definitely cleaner. Thanks! -
Error when running Payables Open Interface Import
Hi Experts,
I need help. I'm facing a problem when run Payables open interface import. Before that, I was running same concurrent many times and the concurrent program is completed normal. But, when I try again I'm getting error. what exacly problem is? What should I do?
arguments
p_org_id='84'
p_sources='manual invoice entry'
p_batch_name='N/A,
p_purge_flag='Y'
p_trace_switch='N'
p_debug_switch='Y'
p_summary_flag='Y'
p_commit_batch_size='1000'
p_user_id='1110'
p_login_id='75025'
Current NLS_NUMERIC_CHARACTERS Envirotment Variables are :
American_America.US7ASCII
Enter Password:
REP-0004 : Warning : Unable to open user preference file.
MSG-00001 : (Before Report) After SRWINIT
MSG-00002 : (Before Report) After Get_Company_Name
MSG-00003 : (Before Report) After Get_NLS_Strings
MSG-00001 : (Get Base Curr data 1) Get Base Currency Information
MSG-00004 : (Before Report) After Get_Base_Curr_Data
MSG-00005 : After Get Operating Unit
MSG-00006 : After Get Purge Flag
MSG-00002 : (Before Report Trigger 1) Import Invoices.
MSG-00003 : (Before Report Trigger 3) Exception : When Others.
REP-1419 : 'beforereport' : PL/SQL program aborted.
REP-0069 : Internal Error
REP-57054 : In-process job terminated: Terminated with error:
REP-1419 : MSG-00001 : (Before Report) After SRWINIT
MSG-00002 : (Before Report) After Get_Company_Name
MSG-00003 : (Before Report) After Get_NLS_Strings
MSG-00001 : (Get Base Curr data 1) Get Base Currency Information
MSG-00004 : (Before Report) After Get_Base_Curr_Data
MSG-00005 : After Get Operating Unit
MSG-00006 : After Get Purge Flag
MSG-00002 : (Before Report Trigger 1) Import Invoices.
MSG-00003 : (Before Report Trigger
Best Regards,
Ade HilmanHi Ade;
Please check below note which is mention similar error
Validate AAD fails with ORA-20001: -: XLA-95103: An internal error occurred. [ID 943024.1]
Hope it helps
Regard
Helios -
PersistenceService denies permission when running an Applet
I'm converting an application that uses JWS to run inside a browser. Ok, so it's not just a matter of changing <application-desc> to <applet-desc> (which is just about the only change I made to the jnlp), but the problem I'm getting is not one I expected.
try {
URL newURL = new URL(newURLBase);
InputStream is = ps.get(newURL).getInputStream();
userProps.load(is);
is.close();
} catch (FileNotFoundException fne) {
// nothing to do
} catch (Exception e) {
// any other error is bad
Globals.nonFatalMsg(null, classId, propsFailureMsg, newURLBase, e.getClass().getName(), e.getMessage());
}This code is throwing a MalformedURLException. (ps is an instance of PersistenceService). The Message returned by getMessage() is that access to persistent data was denied for the URL.
This exact code works perfectly well when run from the desktop application. I'm serving the same jar for the application and the applet. So the URL in newURL is exactly the same for both the application and the applet (I'm serving them both from the same IIS web site). Just the HTML and the JNLP are different.
I thought JWS applets and applications run in exactly the same sandbox. And I thought PersistenceService didn't need any kind of permissions. (Although the JavaDoc does say this can happen.)
Could this be a Browser issue? I get the same result in FireFox and IE. Could it be a java.policy issue?
I'm running 1.6.0_20.Doctor_Dad wrote:
I converted Andrew Thompson's JotPad application, which illustrates the use of the Persistence Service in a JWS Application, to run as an Applet and got exactly the same result.
From which I can only conclude that the Persistence Service doesn't work with Applets.
Has anyone out there ever used the Persistence Service with Applets? Short story, no. I had your post flagged from when I first saw it, thinking "When I get time.." - but had not found any time yet.
I'll check the Bug Parade to see if this has been reported...Good idea. It is not quite clear how a variety of the services of the JNLP API should translate to embedded applets. These would namely be.
- SingleInstanceService // not an applet's right to control browser instances
- BasicService.showDocument(URL) // replaces the applet page or opens new browser/tab?
- IntegrationService // 1.6.0_18+ - shortcuts and menu items are not appropriate for an embedded applet.
I was about to include the PersistenceService in that list, but ultimately it makes every bit of sense to allow embedded JNLP applets to have access to serialisation between runs. The older methods of applets storing data are now probably blocked to the JNLP embedded applets (e.g. creating a cookie).
If you cannot find anything in the bug DB, please raise a bug report and request the documentation address all these areas.
Edit 1:
By 'bug report' above, read 'request for enhancement'. Whether it is a bug depends on Sun's expectation of what they wanted the API to do. ;)
Edited by: AndrewThompson64 on Jun 15, 2010 10:06 AM
Edit 2:
BTW - did you try it with a free-floating applet as well, or just an embedded applet?
Edited by: AndrewThompson64 on Jun 15, 2010 10:47 AM -
Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw
Hi,
I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
data that is pulled from a SQL Server at regular intervals), it fails with the following error:
Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
are missing.
Thanks in advance for any advice you may have.This is truly killing me ... trying to get it working on Windows Server 2012 without success.
I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc., -BUT-
The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively-
I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
[VBScript error msg]
Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open work
[Powershell error msg]
Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
ere is not enough available memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files you no longer need from the disk you are saving to."
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
You cannot call a method on a null-valued expression.
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull -
Error when run page with EJB + ADF
hello
when i run one page with EJB+ ADF give me this error:
<15/Set/2009 17H35m WEST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1253032513131' for task '0'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(Application-EJBModel-ejb)
weblogic.application.ModuleException: Exception preparing module: EJBModule(Application-EJBModel-ejb)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
Exception [EclipseLink-7161] (Eclipse Persistence Services - 1.0.2 (Build 20081024)): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Entity class [class valtex.java.ejb.entities.Team] has no primary key specified. It should define either an @Id, @EmbeddedId or an @IdClass. If you have defined PK using any of these annotations then please make sure that you do not have mixed access-type (both fields and properties annotated) in your entity class hierarchy.
at org.eclipse.persistence.exceptions.ValidationException.noPrimaryKeyAnnotationsFound(ValidationException.java:1245)
at org.eclipse.persistence.internal.jpa.metadata.accessors.classes.EntityAccessor.validatePrimaryKey(EntityAccessor.java:1173)
at org.eclipse.persistence.internal.jpa.metadata.accessors.classes.EntityAccessor.process(EntityAccessor.java:486)
at org.eclipse.persistence.internal.jpa.metadata.MetadataProcessor.processORMMetadata(MetadataProcessor.java:443)
at org.eclipse.persistence.internal.jpa.deployment.PersistenceUnitProcessor.processORMetadata(PersistenceUnitProcessor.java:303)
Truncated. see log file for complete stacktrace
>
<15/Set/2009 17H35m WEST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'Application'.>
<15/Set/2009 17H35m WEST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Exception preparing module: EJBModule(Application-EJBModel-ejb)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
Exception [EclipseLink-7161] (Eclipse Persistence Services - 1.0.2 (Build 20081024)): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Entity class [class valtex.java.ejb.entities.Team] has no primary key specified. It should define either an @Id, @EmbeddedId or an @IdClass. If you have defined PK using any of these annotations then please make sure that you do not have mixed access-type (both fields and properties annotated) in your entity class hierarchy.
at org.eclipse.persistence.exceptions.ValidationException.noPrimaryKeyAnnotationsFound(ValidationException.java:1245)
at org.eclipse.persistence.internal.jpa.metadata.accessors.classes.EntityAccessor.validatePrimaryKey(EntityAccessor.java:1173)
at org.eclipse.persistence.internal.jpa.metadata.accessors.classes.EntityAccessor.process(EntityAccessor.java:486)
at org.eclipse.persistence.internal.jpa.metadata.MetadataProcessor.processORMMetadata(MetadataProcessor.java:443)
at org.eclipse.persistence.internal.jpa.deployment.PersistenceUnitProcessor.processORMetadata(PersistenceUnitProcessor.java:303)
Truncated. see log file for complete stacktrace
>
weblogic.application.ModuleException: Exception preparing module: EJBModule(Application-EJBModel-ejb)
#### Deployment incomplete. #### Sep 15, 2009 5:35:14 PM
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
... 12 more
#### Cannot run application Application due to error deploying to DefaultServer.
[Application Application stopped and undeployed from Server Instance DefaultServer]
<15/Set/2009 17H43m WEST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=HomePage1.>
what's means this error???
thanks
Miguel TeixeiraI have a problem when running
the following is the error report
*** Using port 7101 ***
C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3.1.0\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Common Files\Nero\Lib\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.07\DEFAUL~1 -Doracle.home=C:\Oracle\MIDDLE~1\JDEVEL~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\JDEVEL~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.security.jps.config=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.07\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\JDEVEL~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\JDEVEL~1\modules\oracle.oamprovider_11.1.1 -Dsso.filter.enable=true -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<23/09/2009 05:20:57 PM COT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<23/09/2009 05:20:58 PM COT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 11.0-b16 from Sun Microsystems Inc.>
<23/09/2009 05:20:59 PM COT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.1.0 Wed Jun 10 22:24:41 MDT 2009 1227385 >
<23/09/2009 05:21:03 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<23/09/2009 05:21:03 PM COT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<23/09/2009 05:21:03 PM COT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<23/09/2009 05:21:03 PM COT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00007. Log messages will continue to be logged in C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<23/09/2009 05:21:03 PM COT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<23/09/2009 05:21:11 PM COT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<23/09/2009 05:21:13 PM COT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<23/09/2009 05:21:13 PM COT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\access.log00003. Log messages will continue to be logged in C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\access.log.>
<23/09/2009 05:21:17 PM COT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<23/09/2009 05:21:17 PM COT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<23/09/2009 05:21:20 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<23/09/2009 05:21:20 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<23/09/2009 05:21:23 PM COT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HR_EJB_JPA_App is not versioned.>
23/09/2009 05:21:23 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: Identificador de Aplicación : HR_EJB_JPA_App
23/09/2009 05:21:23 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: "Servicios de Metadatos: Archivo de metadatos (MAR) no encontrado."
23/09/2009 05:21:23 PM JpsApplicationLifecycleListener Migrate Application Credential Store
ADVERTENCIA: Overwriting credentials is allowed in application credential store migration with Weblogic server running in Development Mode and system property 'jps.app.credential.overwrite.allowed' set to true
[EL Finer]: 2009-09-23 17:21:26.427--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--Searching for default mapping file in file:/C:/Users/Administrador/AppData/Roaming/JDeveloper/system11.1.1.1.33.54.07/o.j2ee/drs/HR_EJB_JPA_App/HR_EJB_JPA_App-EJBModel-ejb/
[EL Finer]: 2009-09-23 17:21:26.481--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--Searching for default mapping file in file:/C:/Users/Administrador/AppData/Roaming/JDeveloper/system11.1.1.1.33.54.07/o.j2ee/drs/HR_EJB_JPA_App/HR_EJB_JPA_App-EJBModel-ejb/
[EL Config]: 2009-09-23 17:21:26.53--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The access type for the persistent class [class oracle.Departments] is set to [FIELD].
[EL Config]: 2009-09-23 17:21:26.531--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The alias name for the entity class [class oracle.Departments] is being defaulted to: Departments.
[EL Config]: 2009-09-23 17:21:26.531--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The table name for entity [class oracle.Departments] is being defaulted to: DEPARTMENTS.
[EL Config]: 2009-09-23 17:21:26.534--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The access type for the persistent class [class oracle.Employees] is set to [FIELD].
[EL Config]: 2009-09-23 17:21:26.535--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The alias name for the entity class [class oracle.Employees] is being defaulted to: Employees.
[EL Config]: 2009-09-23 17:21:26.535--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The table name for entity [class oracle.Employees] is being defaulted to: EMPLOYEES.
[EL Config]: 2009-09-23 17:21:26.543--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The column name for element [private java.lang.String oracle.Employees.email] is being defaulted to: EMAIL.
[EL Config]: 2009-09-23 17:21:26.544--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The column name for element [private java.lang.Double oracle.Employees.salary] is being defaulted to: SALARY.
[EL Config]: 2009-09-23 17:21:26.544--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the one to many mapping element [private java.util.List oracle.Departments.employeesList] is being defaulted to: class oracle.Employees.
[EL Config]: 2009-09-23 17:21:26.544--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the many to one mapping element [private oracle.Departments oracle.Employees.departments] is being defaulted to: class oracle.Departments.
[EL Config]: 2009-09-23 17:21:26.545--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The primary key column name for the mapping element [private oracle.Departments oracle.Employees.departments] is being defaulted to: DEPARTMENT_ID.
[EL Config]: 2009-09-23 17:21:26.545--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the many to one mapping element [private oracle.Employees oracle.Departments.employees] is being defaulted to: class oracle.Employees.
[EL Config]: 2009-09-23 17:21:26.545--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The primary key column name for the mapping element [private oracle.Employees oracle.Departments.employees] is being defaulted to: EMPLOYEE_ID.
[EL Config]: 2009-09-23 17:21:26.545--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the one to many mapping element [private java.util.List oracle.Employees.departmentsList] is being defaulted to: class oracle.Departments.
[EL Config]: 2009-09-23 17:21:26.546--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the many to one mapping element [private oracle.Employees oracle.Employees.employees] is being defaulted to: class oracle.Employees.
[EL Config]: 2009-09-23 17:21:26.546--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The primary key column name for the mapping element [private oracle.Employees oracle.Employees.employees] is being defaulted to: EMPLOYEE_ID.
[EL Config]: 2009-09-23 17:21:26.546--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--The target entity (reference) class for the one to many mapping element [private java.util.List oracle.Employees.employeesList] is being defaulted to: class oracle.Employees.
[EL Finer]: 2009-09-23 17:21:26.547--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--Class [oracle.Departments] registered to be processed by weaver.
[EL Finer]: 2009-09-23 17:21:26.547--ServerSession(30842787)--Thread(Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--Class [oracle.Employees] registered to be processed by weaver.
23/09/2009 05:21:34 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: Identificador de Aplicación : wsm-pm
23/09/2009 05:21:34 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: "Servicios de Metadatos: Archivo de metadatos (MAR) no encontrado."
23/09/2009 05:21:38 PM oracle.adf.share.config.ADFConfigFactory getInstance
INFO: ADF Config instance implementation in use is : oracle.adf.share.config.MDSConfigFactory
23/09/2009 05:21:46 PM oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl getNonCachedConnectionsContext
INFO: Registering Connection Runtime MBean
23/09/2009 05:21:46 PM oracle.adf.share.jndi.MDSBackingStore isReadOnlyMDSStore
INFO: Read only backing store
23/09/2009 05:21:47 PM oracle.adf.share.jndi.MDSBackingStore isReadOnlyMDSStore
INFO: Read only backing store
23/09/2009 05:21:47 PM oracle.adf.share.jndi.MDSBackingStore isReadOnlyMDSStore
INFO: Read only backing store
<23/09/2009 05:21:50 PM COT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<23/09/2009 05:21:50 PM COT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00006. Log messages will continue to be logged in C:\Users\Administrador\AppData\Roaming\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<23/09/2009 05:21:50 PM COT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
23/09/2009 05:21:51 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2EE application auditor for componentType=oracle.security.jps.internal.audit.AuditServiceImpl$Auditor@213b6e
23/09/2009 05:21:55 PM oracle.adf.share.config.ADFMDSConfig parseADFConfiguration
INFO: Configuration file:/META-INF/adf-config.xmlcannot not be read by MDS. Reading directly from the classpath
<23/09/2009 05:21:55 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<23/09/2009 05:21:55 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:246d:98bd:32fc:bf08:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:790b:d0ee:a329:57db:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:28a5:117:3611:5367:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:c0a8:66:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.102:7101 for protocols iiop, t3, ldap, snmp, http.>
<23/09/2009 05:21:55 PM COT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<23/09/2009 05:21:55 PM COT> <Warning> <Server> <BEA-002611> <Hostname "Crht-PC", maps to multiple IP addresses: 192.168.0.102, fe80:0:0:0:246d:98bd:32fc:bf08%12, fe80:0:0:0:28a5:117:3611:5367%13>
<23/09/2009 05:21:56 PM COT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<23/09/2009 05:21:56 PM COT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
[Running application Application9 on Server Instance DefaultServer...]
DefaultServer startup time: 64580 ms.
DefaultServer started.
<23/09/2009 05:22:08 PM COT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Application9 is not versioned.>
23/09/2009 05:22:08 PM JpsApplicationLifecycleListener Migrate Application Credential Store
ADVERTENCIA: Overwriting credentials is allowed in application credential store migration with Weblogic server running in Development Mode and system property 'jps.app.credential.overwrite.allowed' set to true
<23/09/2009 05:22:09 PM COT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1253744528059' for task '0'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(Application9-Project1-ejb)
weblogic.application.ModuleException: Exception preparing module: EJBModule(Application9-Project1-ejb)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
Exception [EclipseLink-28010] (Eclipse Persistence Services - 1.1.1.v20090430-r4097): org.eclipse.persistence.exceptions.EntityManagerSetupException
Exception Description: PersistenceUnitInfo Project1 has transactionType JTA, but doesnt have jtaDataSource.
at org.eclipse.persistence.exceptions.EntityManagerSetupException.jtaPersistenceUnitInfoMissingJtaDataSource(EntityManagerSetupException.java:154)
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.predeploy(EntityManagerSetupImpl.java:798)
at org.eclipse.persistence.jpa.PersistenceProvider.createContainerEntityManagerFactory(PersistenceProvider.java:216)
at weblogic.deployment.PersistenceUnitInfoImpl.createEntityManagerFactory(PersistenceUnitInfoImpl.java:343)
at weblogic.deployment.PersistenceUnitInfoImpl.createEntityManagerFactory(PersistenceUnitInfoImpl.java:323)
Truncated. see log file for complete stacktrace
>
<23/09/2009 05:22:09 PM COT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'Application9'.>
<23/09/2009 05:22:09 PM COT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Exception preparing module: EJBModule(Application9-Project1-ejb)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
Exception [EclipseLink-28010] (Eclipse Persistence Services - 1.1.1.v20090430-r4097): org.eclipse.persistence.exceptions.EntityManagerSetupException
Exception Description: PersistenceUnitInfo Project1 has transactionType JTA, but doesnt have jtaDataSource.
at org.eclipse.persistence.exceptions.EntityManagerSetupException.jtaPersistenceUnitInfoMissingJtaDataSource(EntityManagerSetupException.java:154)
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.predeploy(EntityManagerSetupImpl.java:798)
at org.eclipse.persistence.jpa.PersistenceProvider.createContainerEntityManagerFactory(PersistenceProvider.java:216)
at weblogic.deployment.PersistenceUnitInfoImpl.createEntityManagerFactory(PersistenceUnitInfoImpl.java:343)
at weblogic.deployment.PersistenceUnitInfoImpl.createEntityManagerFactory(PersistenceUnitInfoImpl.java:323)
Truncated. see log file for complete stacktrace
>
[05:22:09 PM] Weblogic Server Exception: weblogic.application.ModuleException: Exception preparing module: EJBModule(Application9-Project1-ejb)
[05:22:09 PM] Caused by: java.lang.Throwable: Substituted for missing class Exception [EclipseLink-28010] (Eclipse Persistence Services - 1.1.1.v20090430-r4097) - org.eclipse.persistence.exceptions.EntityManagerSetupException
Exception Description: PersistenceUnitInfo Project1 has transactionType JTA, but doesnt have jtaDataSource.
[05:22:09 PM] See server logs or server console for more details.
oracle.jdeveloper.deploy.DeployException: oracle.jdeveloper.deploy.DeployException: oracle.jdeveloper.deploy.DeployException: Deployment Failed[05:22:10 PM] #### Deployment incomplete. ####
oracle.jdeveloper.deploy.DeployException: oracle.jdeveloper.deploy.DeployException: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:341)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:235)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:442)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$6$1.run(AdrsStarter.java:1469)
Caused by: oracle.jdeveloper.deploy.DeployException: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:483)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:332)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:465)
... 12 more
#### Cannot run application Application9 due to error deploying to DefaultServer.
[Application Application9 stopped and undeployed from Server Instance DefaultServer]
Please help me!!
thnks!! -
Error when running a script using upsshell.exe
I have a simple custom script which is
Sub Test1()
Set fso= CreateObject("Scripting.filesystemobject")
Set ts = fso.CreateTextFile("D:\DATA\****\Outbox\Templates\Test.txt")
ts.writeline "hi"
End sub
When I am running it manually in workbench, the script runs fine but when I try to run it using upsshell.exe(command provided below)
D:\Oracle\MIDDLE~1\EPMSYS~1\products\FINANC~2\SHARED~1\upsShell.exe CustomScriptEx=****~admin~****~~****~D:\DATA\test\Outbox\Logs~Test1~1033~0
i get the following error
ERROR:
Code............ 438
Description..... [Script failure caused error]: Object doesn't support this property or method
Procedure....... modupsShell.ExecuteCustomScriptEx
Component....... upsShell
Version......... 1112
Process ID...... 292496
Thread.......... 290292
IDENTIFICATION:
User............ admin
Domain..........
Computer Name... *******
App Name........ ****
PROCEDURE STEPS:
1-Split Arguments
2-Create Load balancer=*******
3-Authenticate
4-Get Next App Server
5-Open App Server=*******
6-Execute the script=Test1
7-Step was not reached, a previous step failed
Any ideas on the error?Hello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering
Maybe you are looking for
-
Script to Delete more than 1 user from the database
Hi All, I have a list of users in a file and i want to write a script to delete all these users from my database. I have tried deleting users using: drop user user1,user2,user3..... but it doesn't seem to work. Can anyone suggest how do i read the us
-
OATS: Error Creating datasource client connection
Hi All When i try to add montiors in the OATS controller machine i am getting the following error . Error while creating datasource client connection. i am trying to monitor a linux machine. I am able to ping that machine from controller. when i trie
-
After updating iTunes to 11.4, non eof my device is recognised (iPhone4 , iPhone5, iPad3), iTunes comes with a message saying : " You need to turn on synchronization in isync preferences before you can sync contacts and calendars" Please Advise.. Tha
-
Hi. my phone won't charge with any iphone cables and I would kinda like to know why.
-
Different pricing procedure for order document and billing document
In which scenerio order and billing has diffrent pricing procedure?