Bad host routes making websites inaccessible!?

After months without any issues, I suddenly started having problems accessing some specific web based resources. The connectivity issue is isolated to my MAC on my home wireless network. I have a windows based system on the same wireless network with no issues. I have a wired windows based system on the same network with no issues. I did a lot of research and saw that many people have seen these types of issues, but none of the fixes posted help me. So I went to check the routing table on my MAC and found what I believe are my issues:
Results for a problem sites:
Keiths-MacBook-Pro:~ keith$ route -n get x.x.x.x
   route to: x.x.x.x
destination: default
       mask: 0.0.0.104
interface: en1
The mask is not DEFAULT or 0.0.0.0?
   route to: X.X.104.130
destination: X.X.104.130
NO MASK
interface: en1
The destination is the same as the target host, as opposed to DEFAULT? Also, there is NO MASK entry?
Results for a good site:
   route to: 72.21.215.232
destination: default
       mask: default
    gateway: 10.0.0.1
interface: en1
This is what it should look like.
I'm using a standard, simple home LAN configuration, meaning access to remote resources on all devices on my LAN point to the default gateway. There are no host specific routes on any of my devices. I also tested connectivity on a celluar wireless service and I'm seeing similar results.
Can anyone help with this issue? Thanks.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

No host routing entries

after security wipin my girlfriends old blackberry i can not set up my email cause its now BES
host routing table has no entries!
how can i change it back to being BIS instead of BES?
also i have blackberry data plan on my contract

Hi and Welcome to the Community!!
After any wipes, updates, etc., I always suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step...if any step does not succeed exactly as written, then stop and fall to the bottom, contacting your mobile service provider for formal support):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your BIS configuration for the affected email accounts (likely using the carrier BIS website from a PC, or trying, from the BB Browser, www.blackberry.com/integrate). Otherwise, you should contact your mobile service provider for formal support.
BTW -- Enterprise always shows on all BBs inside of the Email Configuration Wizard. When a proper BIS-level data plan is provisioned, Internet/Personal are added. But, Enterprise is ALWAYS there, regardless of if the user is activated on any BES or not.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problems with my hosting for my website

hi i have a problem i have a hosting for my website and was working fine direct from the modem when i put the router stop working i don't know if is that the router have to be configurate . the router i have is WRT54G My internet service is from comcast cable Thanks for you help Manasses

well , i would lyk u to put some light on the issue first.
manasses .
u are not able to host the website now ?? or u having some problem in accessing ur site from a remote location or shld i say WAN?
Or there is some problem In The FTP file Transffering From ur Website??
Well , there are many issues related as u said , so plz let us know the Problem u coping with ?
~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

I want to host my Muse website on Dreamhost. When I publish it, what do I put in the "Host Directory" field?

I want to host my Muse website on Dreamhost. When I publish it, what do I put in the "Host Directory" field?

Hi,
I'm no expert in this but I think you:
1) first have to buy your domain.
2) Go to the > manage domain section > under the Web Hosting section Add hosting.
3) Once this is all done you should be able to access your site with an FTP client.
4) Once you are in your directory you should see the folder with your domain name.
5) Drop your published MUSE site into the folder. You should be able to now type your
URL into a browser and see your site posted online.
If this isn't clear... I would suggest going onto dreamhost and doing a chat session with them
they are really patient and helpful!
Hope this helps a little.
Steve

Hosting a basic website on my iMac.

Is there any software (bundled or third party) that would allow me to host a basic website on my iMac?
If there is, can someone link me to some information regaurding setting it up?

OS X is all the software you need!
Matt's right. OS X comes with the Apache web server already built in, which is very widely used, even for professional sites.
Go to System Preferences, Sharing, and tick "Personal
Web Sharing". Then place your site files in your
home/Sites folder.
You can access your site using
http://127.0.0.1
This part is a little incomplete, however. There are two places you can put your HTML documents. The first is in the main /Library/WebServer/Documents/ folder. You can find that folder by starting at the top level of your hard drive (i.e., double-click on your hard drive's name in the Finder, then "Library", then "WebServer", etc.). Sites in this folder will be visible at the address he gave. Also, http://localhost should work, too.
Secondly, you can place a web site in the "Sites" folder inside your user's Home folder. In order to access pages there, you have to add the user's name to the address. So if your user name was "wsender", you'd use this address:
http://127.0.0.1/~wsender or http://localhost/~wsender
to access your site.
best,
charlie

Hosting my own website/or a few on my Mac!

Is it possible to host my own website/or a few on my own Mac? My isp does allow it and my Mac is at present always connected 24/7

this really depends on dyndns - e.g. it is dependent on the number of machine names they will assign to your 'domain'. Assuming this is some number >1, then you can setup name based virtual hosting in your httpd.conf file for any number of virtual hosts. this number can be large - but i do not know the limit (this should be dictated by apache and the specs of your computer). for more apache doc on the subject, see (and quote below):
http://httpd.apache.org/docs/1.3/vhosts/name-based.html
With name-based virtual hosting, the server relies on the client to report the hostname as part of the HTTP headers. Using this technique, many different hosts can share the same IP address.
personally, i don't use dyndns (we have static ips and dns here @ work to allow the adjustments), so i can't provide too much additional information. however, a google search and/or experimentation should provide your answer.
good luck,
b
DP867 MDD and 12 1Ghz PB

Phone unable to get Host Routing Tables

Hey,
I've been on with Rogers tech support for sometime today.
My originating issue was wireless wouldn't work and everytime i tried to scan for networks the bb would freeze and auto restart. I did a backup and wiped the device and wireless was working yet again.
But now i'm unable to get data services at all, apparently with rogers you're supposed to get EDGE and not edge. You're also supposed to have 8 entries in the Host Routing Table and i have none.
Rogers has wiped the handheld, reloaded all applications to barebones and still the issue persists.
Whenever i try to do a full restore it errors out at reloading WLAN Profiles and options.
Before all this started and it was wiped trying to view WIFI Options an error popped up "Uncaught Exception: padded byte out of range" now i remembered that from memory so the Uncaught part maybe wrong.
Really don't want to drop another $500 on a phone literally 2 years after i spent $400 for this thing.
Thanks
Ian

I should also add that i tried my dads sim card in my phone and same issue.
Radio Data Activation: Yes
Signal Level: -86dBm
Radio Access: EDGE
Network: Rogers Wireless
IP Address: 10.172.171.13
ICMP Ping Echo: Yes
BlackBerry Registration: No
Connected to BlackBerry: No
BlackBerry PIN-PIN: No
Server Name: GBISXNAC01S08
Email Address: <email address #1>
Connected to <email address #1>: No
Server Name: GBISXNAC01S08
Email address: <email address #2>
Connected to <email address #2>: No
PIN: 24a5d7dd
MSISDN: <my phone number>
Device Type: BlackBerry 8900
Application Version: v4.6.1.94
Platform Version: 4.2.0.69
Thanks
Ian

Host routing tables

Hi all. I have a blackberry curve 8310 with 4.5 operating system. I cannot access the at&t network. It searches for the network and then says no service. My sim card is fine (works in my other phone) and I have a data plan. I have service books but no host routing tables. When I try to register the hrt's is says message is queued and will be sent once data coverage is available. And again when I put my sim into another phone, everything is fine and I have a full signal. I called at&t technical support and I might as well have been speaking german. They had no suggestions whatsoever. Any way I can get the hrt's on my phone ? thanks

Hi and welcome to the forums!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
Go to options-advanced options-host routing table (don't select anything here) -menu-register now
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Getting bad host error when trying to deploy simple web sample application

hi,
Can someone tell me why I'm getting this error when trying to deploy the simple web application from samples
This is what it said:
deploy_common:
[echo] Deploying ../assemble/war/webapps-simple.war.
[exec] java.net.MalformedURLException: Bad host: station_1
thanks

Hi,
Another update on this issue.
To remove the error that we were getting (java.lang.LinkageError: Class javax/xml/transform/Source violates loader constraints), we tried some searching around and found out that the way to fix it is to provide correct versions of xalan.jar, xml-apis.jar and xercesImpl.jar. We downloaded the required version from the apache site and added it to our WEB-INF/lib folder in the WAR file.
Now, we are getting this error:
XPathFactory#newInstance() failed to create an XPathFactory for the default object model: http://java.sun.com/jaxp/xpath/dom with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: No XPathFctory implementation found for the object model: http://java.sun.com/jaxp/xpath/dom
What else we might be missing in our libs or do we need to check some other configurations?
Any help on this would be much appreciated.
Thanks,
Gaurav

How can i host my own website through the server?

Hello,
I am very new to the server and I bought it specifacally because I thought I could host my own website and not have to go through something like godaddy.
How can I do this with the Mac OSX Lion Server? Have a domain name and publish it through something like iWeb?

you will need a static ip address that either points to the server with port forwarding or is on its nic card. You then have to set up your dns entries and point your domain name to your dns server. You can then turn on web services.

HOST ROUTING TABLE IS EMPTY please HELP

HELLO THERE PLEASE HELP ME , MY HOST ROUTING TABLE IS EMPTY
WHAT DO I DO NOW?

Hi and Welcome to the Community!!
With a strong carrier network signal (not WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support...it is, after all, your carrier network that must populate these items to your BB.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

No entries in my Host Routing table

I got the phone from Cincinnati Bell in USA and registered the phone with Etisalat Nigeria, it worked for about 7 months and stopped working and when i checked the Host routing Table i found no entries. My PIN:29BA62F7 and my IMEI No:358807040132108. Please help.

On the handset, go to:
For OS5 and 4.x
Options - Advanced Options - Host Routing Table
and click Register now, and escape back to the home page.
For OS6 and higher
in options, device , advanced, host routing table, click on menu and choose register now.
Wait 2 minutes and see if registration to network happens.
Resend your service books from your carrier BIS site:
From your handheld device: http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Nexus 7010 - redistribute host routes in to OSPF

In my Nexus 7010 infrastructure, I have a requirement to redistribute host routes in to OSPF so that the other connected sites receive the host routes through OSPF.
These hosts are part of the connected network (192.168.100.0/24) on Nexus, I dont want this network to be advertised in to OSPF but I want the hosts inside this subnet (192.168.100.11 and 192.168.100.12) to be advertised.
I tried to create a prefix list with these two hosts and added them to a route-map and then using the "redistribute direct" command called this route-map in to OSPF, but this is not working.
However, if I add the entire subnet (the connected network) in to this route-map, it shows up in OSPF.
Is there a way I could have only the hosts to be part of the OSPF database?

Hello, There is no need for VDC or VRF I think. are we missing a trick here. I also just tested for my own sanity. (Or am I completely under-thinking this)
N7K-1 has vlan 24 and the host route will be to 172.25.24.20
N7K-1 Config:
conf t
ip route 172.25.24.20/32 Vlan24
ip prefix-list TEST seq 5 permit 172.25.24.20/32
route-map STATIC_TO_OSPF permit 10
match ip address prefix-list TEST
router ospf 1
bfd
router-id 192.168.101.1
redistribute static route-map STATIC_TO_OSPF
here is what I see on its neighbour N7K2:
DC1-N7K2# show ip route 172.25.24.20
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
'%<string>' in via output denotes VRF <string>
172.25.24.20/32, ubest/mbest: 1/0
    *via 192.168.102.5, Eth8/1, [110/20], 00:00:07, ospf-1, type-2
DC1-N7K2#
                Type-5 AS External Link States
Link ID         ADV Router      Age        Seq#       Checksum Tag
172.25.24.20    192.168.101.1   479        0x80000002 0x0eed    0
So in essence point the host routes statically to the directly connected interface.
hth.
Bilal

Any suggestions on hosting my own website with OS X Server?

I am currently taking the International Baccalaureate programme, taking visual art as a higher level subject. And my university counselor os suggesting me to create my own website as an online portfolio for all my work, I have a 2010 MacBook hanging around that I don't really use and should be capable to host a server from my home. Just before I go right in and buy OS X Server is there anything else I should know about hosting my own website for an online pro to flip? Think of it as an online gallery. Thanks ahead!

Actually another thing, I'm trying to see what software I can use to make my website, I don't want to use iWeb it's just a little to rudimentary (in my opinion). Any other web development software that is user friendly and can create semi professional websites? Would be best if no coding is involved since I have no idea how to.

Bad host routes making websites inaccessible!?

Similar Messages

Maybe you are looking for