Inspection point in SAP QM

Dear Sir
My query is related to SAP-QM
1,How to define INSPECTION POINT in Inspection planning?
2.Where is default setting of Inspection point like at Plant level & material level?
3. If inspection point of material is changed in Tasklist and a new inspection lot is generated then it again reflect both the Inspection point (the new one & the old one).So how to aviod this problem so that it shows only the new inspection pont at the time of Result recoding.

Hello Alpana,
question 1 How to define INSPECTION POINT in Inspection planning?
In the transaction QP01 or QP02 you can define an inspection point at header level.
This can also be done for production plans and process instructions.
The inspection point definition is done in the customizing of the Quality planning.
question 2 Where is default setting of Inspection point like at Plant level
This can be found under the customizing point Basic settings in QM.
Using the settings at plant level it is possible to define inspection points at plant level.
If you want to use the setting at material level then this would be done in the inspection plan.
question 3 If inspection point of material is changed in Tasklist and a new inspection lot is generated then it again reflect both the Inspection point?
The changing of inspection points is not possible (Inspection point definition)
The changing of inspection points in inspection plans is not recommended create a new plan in this case.
I hope that this information helps you resolve your issue.
Regards
Isabelle

Similar Messages

Inspection point results on characteristics tab QA11

When you use multiple inspection points standard SAP shows the average of the results on the characteristics tab in transaction QA11. Is it possible to see all separate results instead of the average?

My client wants to view all the separate results when maken the ud. I think the best way to do this is to click on the Charac data button.
Edited by: Maarten_m4 on Jan 12, 2011 8:31 AM

Setting up inspection point in a scenario require more than one inspection

Hi all,
Maybe I am still not very clear on the PP-QM conceptu2026 hope you can see my problem on the following questionu2026..
According to SAP in the QM-production environment, we key in ONE inspection point in the task list header level (i.e. either the master recipe, routing, or rate of routing).
Based on the following business scenario which is going to use inspection point for the inspection:
u2022     Time-based intervals (for example, an inspection point every hour or for each work shift)
u2022     Quantity-based intervals (for example, an inspection point for each container)
u2022     Freely-defined intervals (for example, an inspection point each time a tool change occurs)
Since each of the above scenarios require more than one inspection points to be created and to be assigned to the task list header.
Thus, how to accomplish multiple inspection point assignment when the task-list header only allow me to assign one inspection point at a time?
Thanks
YY

Hi guys,
Thanks. However, in the SAP help portal it does said the system allows several inspection points to be assigned to an inspection operation whether it is in routing or recipe.
Therefore, does it means I can assign more than one inspection points in the operation detail level for either recipe or routing if I will to click the u201CNo relationu201D radio button in the u201CQuality Management: Inspection Pointu201D section. (i.e. is this is the right place to allows this assignment)?
For example, on the change master recipe screen at the Operation tab, I highlight one line item (i.e. one operation line item and zoom into this operation line item, I donu2019t see any field box that allow me to assign several inspection points to an operation? Instead, on the u201CQuality Management: Inspection Pointu201D section, there are the following fields appear:
- Insp.pointCompletion dropdown box
- 4 radio buttons on the inspection interval (ie. Time-related, Qty-related, No-relation) and its subseq time and quantity value input box.
- Quan.pt. lot checkbox
- Last Part Lot Assgmt checkbox
Thus, where is the section in the operation overview screen at Master Recipe or Routing level that I can assign several inspection points?
Thanks
YY

QAPP_CUST_IP_F4 - inspection point help

Two related questions here. I haven't set this FM up before.
One: the FM mention table T_TQ79_F4_VALUES. I can't find this table in our system. Should this table be there?
Two: The FM indicates that the table is index by the user field attribute which is a one character field. The problem I see is that if I have multiple inspection point identifiers. I.e. I create 901 and 902. In 901 I use the field number(size =3) as a shift number... 1, 2 or 3. But in 902 I use the same field as an employee ID number.. 213, 418, etc... How can I limit the help information for each IP identifier. The user would be clueless as to the IP identifier being used. For 901 I want the help to display "Enter the shift number that sample was taken on." For 902 I want to enter "Enter the employee number of the person that took the sample."
FF

Yes.. we saw the defined structure. But the module help specifically states to maintain the values in the table T_TQ79_F4_VALUES. The values are then read into the structure from the table.
We have already designed a Z-table should we need it. But we try not to use a Z-tables if SAP has a provided solution. We have submitted an OSS note to them on this.
I just wanted to see if it was just us that was missing the table, or if others were missing it. If it is missing, I'm wondering if any one has implemented this FM and if they all used Z-tables for storing their data or if SAP provided something. I searched OSS already to no avail.
In any case, SAP either needs to update their documentation for this process, or they need to provide the table that is mentioned. Seems pretty clear that there is an SAP disconnect here. I've pasted the help documentation from the SAP provided FM below.
FF
F4 - Help for the Inspection Point Fields
You can use this function module to specify input help (F4) for the user field for inspection point identification.
The function module serves as a copy model for user-defined programs. Note that the interface for user-defined programs must correspond to the interface for this function module.
You must enter values for the specified user field in the table T_TQ79_F4_VALUES to offer a list of values for the user. You can enter an explanatory short text for each value.
SAP determines the format for the possible values. This means that possible values are determined and exported based on the table.
For more information, see documentation on the individual parameters.

Usage of Sampling Procedure with Inspection Points

Hi Experts,
Does any one have an idea whether we can use sampling procedure with free inspection points apart from In-Process Quality Inspection (Inspection Type 03)?
Thanks in Advance,
Arun
Edited by: Arun Mann on Dec 11, 2008 11:11 AM

hi
check the links canhelp you
http://help.sap.com/saphelp_47x200/helpdata/en/b5/c4db38a91b11d1bd610000e829fdb3/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2d/350c26448c11d189420000e829fbbd/frameset.htm
-ashok

Inspection points

Hi,
I am using Inspection plan with freely defined inspection point (100).
Inspection type: 04
I want to do 100% inspection. Material master setting is done for early lot creation.
If I use freely defined inspection point in the plan and create an order of any quantity > 32767, I get a sample size of 32767. If create a order of 100000 qty still sample size is 32767 and I can't even change it during result recording. If I don't use freely defined inspection point I get a sample size which is equal to the order quantity.
My Requirement:
I want to use freely defined inspection point in the plan... and also I want to get a sample size equal to production quantity (not 32767 always when production quantity exceeds the this quantity).
Please let me know how to control this fix sample size 32767 when my plan is with freely defined inspection point
If its SAP's Limitation then please let me know how to hide inspect and inspected columns in result recording screen.

SIr, I am repeatng my problem again,
I have a plan for inspection type 04, i have used inspection points 100 as free inspection points.
each mic have same sampling procedure as:
Sample type 100 % inspection
Valuation Mode Manual
Inspection Points Free inspection Points
In inspection plan base quantity for each mic is 1 and unit of measurement EA
Now i have created process order of 50000 EA
Whn process order confirmed lot of quantiy 50000 comes in quality
Lot quantity come 50000 EA, Sample size comes 50000 EA
but the problem is that when i do result recording, in the field of Inspect and inspected systm shows default figure 32,767
as in inspected field it should come 50000 EA if i make PO of less than 32767 then it appears fine same, bt more than PO quantity 32767 it shows default value 32767.

Creating an inspection point

Hi,
Where in the SAP menu or SPRO I can create the inspection point?
Thanks
YY

Dear YY,
To creat an inspection point follow below path
SPRO u2013 Quality management u2013 Quality planning u2013 Inspection planning u2013 General u2013 Define Identifier for Inspection points
Thanks
Vinay

Inspection point in SAP4.0B

Dear QM experts,
In SAP version 4.6C, I have setup inspection point type - 'Freely defined inspection point' which I used for my quality inspection after goods receipt.
Therefore, I setup the necessary setup in the Inspection plan header and operation level.
However, in another system, SAP version 4.0B, I realize the 'Freely defined inspection point' does not exist. Instead, I tried using 'Inspection point for inspection during production' but when I update the 'Inspection point' in the Inspection Plan header, I get an error message - Inspection point Z01 (type ) is not allowed for this task list type (Q).
I can't seem to find any config. which is missing. I did the same configuration as 4.6C.
Please advice how I can use 'Freely defined inspection point' in Inspection plan in SAP 4.0B.
Advice is much appreciated. Thank you.

Hi Bee,
As i have not that much hands on SAP releases 5.0 and olders. But what i can clearly see is, there is some change implemented in the new releases that don't constraint to assign inspection point 100 to tasklist type 2.
And the check is there for object, CP_DA_TSK_CHECK and CP_DA_TSK_CHECK - checks if inspection points are allowed for given task list, that is responcible for the error message QP289. That is a wrokround done by me. You can compair the code for the check with your program and may rectify the issue.
The code is as below for - CP_DA_TSK_CHECK
FORM tsk_inspection_points_check
      USING
       i_plnty                  LIKE tsk_class_data-plnty
       i_tsk_slwbez             LIKE tsk_class_data-slwbez
       i_tq79                   LIKE tq79
      CHANGING
       e_flg_tsk_check_aborted TYPE c.
DATA:
    l_qm_ip_type_allowed LIKE tsk_class_data-qm_ip_type_allowed.
CLEAR e_flg_tsk_check_aborted.
PERFORM tsk_qm_allowed_ip_type_set
          USING     i_plnty
          CHANGING l_qm_ip_type_allowed.
CALL FUNCTION 'QAFD_IP_SLWBEZ_CHECK'
       EXPORTING
            i_slwbez         = i_tsk_slwbez
            i_steuerkz       = l_qm_ip_type_allowed
       EXCEPTIONS
            x_ip_not_found   = 1
            x_ip_not_allowed = 2
            OTHERS           = 3.
IF sy-subrc NE 0.
wrong type of inspection point
E289: Insp. point &1 &2 is not allowed for task list type
    MESSAGE e289(qp) WITH i_tsk_slwbez
                          i_tq79-ppkttyp
                          i_plnty
                     INTO g_msg_dummy.
    CALL FUNCTION 'CP_MC_MESSAGE_COLLECT'
         EXCEPTIONS
              message_not_collected = 1
              OTHERS                = 2.
    e_flg_tsk_check_aborted = cp_check-flg_yes.
ENDIF.
ENDFORM.                               " sk_inspection_points_check
update us to help you more, reward points to help you better!
Regards,
Shyamal

Automatic valuation of inspection point for physical samples.

Hi,
My requirement is after recording results (QE11) for each and every sample, automatic valuation of inspection point to be done.
Inspection point valuation not done automatically even though I have created the required details in inspection Plan.
I have maintained the following details in inspection plan
In Inspection plan header:
Inspection Point : 200 & Sample Drawing Procedure
In Inspection Plan Operation Details:
Insp.Point Completion: Automatic valuation based on inspection point definition.
Is there any settings to be done in customiszation.
Please help me to solve this issue.
Thanks & Regards
V.Devaraj

Hello Sap-Guys.
I am facing the same problem, and I did several workarounds, to evalueate the inspection point by myself.
The problem is this :
We are using RFC-techniques to evaluate samples.
Shortly, there is an inspection , which is defined, to be per point, consisting of two user fields, date and time. There must be three things (characteristics )controlled, two manually, by the workers, and the third will be calculated internally by sap via formula.
The rfc-possibilities are provided by myself, building a rfc-enabled z-module, which calls some SAP-BAPIS, from which one is called
BAPI_INSPOPER_RECORDRESULTS
Until now I do not think, it behaves like tha sap-gui.
Am I doing something wrong, or does this module really not behave like the sap gui ???
If I evaluate the very first char , I check, whether this is the only one for this actual inspection point.
If so, I delete the code groups, if any, (only quantitative evaluation til now ) and the point stays grey, ok, because there are still two other char-evaluations missing.
If my char to evaluate is not the first, then I check, which are stil left, AND , if there are any left without evaluation, I also erase code and codegroups ( if any ) in the insppoint structure, so the char gets its evaluation and the point still stays grey.
But if there had been already any evaluations, I manually check , whether my actual value meets the tolerances, and then I manually tell the inspection-point structure, which code must be used, in order to set its own state correctly.
This means, if my actual sample meets the tolerances, and only one sample was rejected , I tell the inspection point, to stay red, by setting the approoriate code manually from qplak.
If all others were ok, but the actual evaluation ( calculated manually again, tolerances ... ) is not ok, then i tell the inspection point structure, to get "red".
I do this every time, a evaluation takes place, and it works nice for simple values.
And here is my big Problem :
My last characteristic of the three to be evaluated, must not be evaluated by the workers, but BY calculation inside sap, BECAUSE IT HAS A FORMULA.
Especially for this case I left a comment in my code, and now this case occurred.
So, what could be a better approach , to use this bapi, AND trigger automatic inspectionpoint evaluation WITHOUT MY ENTIRE WORKAROUND ( where I now see, that it cannot deal with formulas ) ???
( It could, if I debugged deep enough, to check, how it builds the formula ) , but bapis are there to use them.
Aren`t they???
Could anybody give me a hint ?
Thx and best regards
R.Dornfeld

How come inspection points with DESTRUCTIVE MICs don't affect sample size?

Hi guys,
i have a case i tried on IDES and i need an explanation for it if you can.
@ the beginning we have an in-process inspection with inspection points and non-destructive MICs, the interval of 10 mins (of the inspection point) generated 3 inspections, and my sampling procedure led to a sample size of 1 PC, in the inspection lot display the sample size is "1", which is normal and i understand this.
here comes the problem
we will change one of the MICs and make it destructive. Now we have our 3 inspections. The normal logic says that I'm having 3 inspections and there is on of the MICs DESTRUCTIVE, therefore I'm must get 3 samples, one for each inspection, which means that when we check the sample size in the inspection lot we must get a size of 3, but when i tried this i got a size of 1 again....and this is not logical because my sample will be destructed in the first inspection so how can I carry on the remaining 2 inspections ???
so i need to know how come I'm getting a size of 1 and is that right or wrong ???
i hope i made it clear and wish you can help
Regards,
Mahmoud Osama

Hi Amol,
i'm sorry i don't understand what do you mean by operation confirmation quality ???
and about stock posting, i know as you said that it is not possible with in-process inspection, as the lot is not stock relevant, but whether it is stock relevant or not has nothing to do with the sample size calculation, my problem is that the logic says that i must get 3 samples because with each inspection i'll destruct my sample, but SAP calculations give only one sample !!!!
i hope you can help with that, thanks for you concern.
Regards,
Mahmoud Osama

Quality Certificates using Inspection Points

Hi Experts:
It's possible print a Quality Certificates using Inspection Points?
The theory says that I can create a directly Q. Certify from Inpection Lot
http://help.sap.com/saphelp_470/helpdata/en/55/a8b43446a1c564e10000009b38f83b/frameset.htm
But I don't know how to create it using Inspection Points.
My Inspection points are:
1. Date
2. Count number
3. Work Center
The customer wants the average from different characteristics.
Somebody can help me?

Hi Deihus,
Yes its possible with ABAP help.
1.     You explore QASE table. The values of MIC readings which you enter in QA32 are stored in filed QASE-MESSWERT.
2.     Pass inspection lot numbers from QALS table in to QASE and fetch values stored under MESSWERT. You find batch number also in QALS table. (Filed CHARG).
3.     You can co-relate inspection lot number, inspection points and batch number. Lot number is unique and available in all tables QASE, QASR, QAPP.
4.     Calculate the average of readings (QASE-MESSWERT) on the basis on MIC(QASE- MERKNR) by ABAP programming.
Regards,
Anand Rao

Defect recording for inspection points

Hi,
My client having requirement of recording the defects every hour.in standard SAP defects recording with respect to inspection point is not possible.Is there any other way to do this.
Regards,
S.P.Selvathangam

Hi,
It is not a problem follow the below step.
1). Go QM01 enter notification type Q3 (Manual Defect and Notification creation) and press enter.
2). After enter system will raise the one pop up screen here enter the production order as well as operation number and press enter.
3), After that it will open defect with notification screen here you can enter defect qty, defect code reason, causes etc and save.
For any query revert.
Thanks & Regards,
S.Babusingh

Create a Inspection Point

Hi,
I need help. What is the way to create a new Inspection point by the Transaction QE51N and the BAPI_INSPOPER_RECORDRESULTS?
Thanks in advance.

Dear Trini Rolden,
      The Transaction QE51N is used in SAP for result recording purpose.
Result are recorded against inspection lot.Again inspection plan assign in inspection lot. If you maintain inspection point in inspection plan header, then you can record the result of that particular inspection point.
If you wants to create inspection point functionally, follow the below step:-
SPRO -> Quality Management - > Inspection Planning -> General --->Define Identifier for inspection Point -> Execute --> (Create your own inspection point)
If you wants to prefer Customize Developement:-
user exit QAPP0001 -->User exit QAPP 1 (create inspection point)
You can use this to give pop up or default names of the inspection point
here you can call
ALL FUNCTION 'BAPI_INSPPOINT_CREATEFROMDATA' "Create Inspection Point
EXPORTING
    data =                      " bapi2045l4    Data for inspection point
IMPORTING
    insplot =                   " bapi2045l4-insplot Inspection lot number--->use user defined
    inspoper =                  " bapi2045l4-inspoper Inspection lot operation number
    insppoint =                 " bapi2045l4-insppoint Inspection point
    return =                    " bapireturn1   Return value
    . " BAPI_INSPPOINT_CREATEFROMDATA
Regards,
Laxmikanta.

Inspection Point table

Dear All,
we are in the process of automating the results recording process using a Z program. For the results recording i have used Inspection points. What i mainly want to do is from several characteristics, Initially record results for one inspection characteristic and later record results for a different inspection characteristic. In the STD SAP this allows to do. What i want to know is since i use the Inspection points, what are the tables that will be used?
Thanks and Regards,
DTD

Hi
Hope these details will help you
QALS Inspection lot record
QAPP Inspection point
TQ79 Table with inspection point/user field combinations
TQ79T Key words for inspeciton point user fields
QAMR Characteristic results during inspection processing
QAMV Characteristic specifications for inspection processing
Regards
Charith

Creation of multiple inspection points

Hello experts,
I try to figure out how to create multiple inspection points for one operation at process order release.
It means that the release of the process order triggers:
- inspection lot creation (lot origin 03)
- inspection points creation for operation with inspection characteristics assigned to it
In the recipe header, I entered inspection points = 150 - generated inspection point, qty or time
(module function QAPP_CUST_IP_CREATE is activated for "automatic creation of insp. points")
In the operation header, I select time related -and enter 1 HR
However no inspection point is created at process order release. Only inspection point identifier is created automatically when I select the next inspection point in TR QE51N.
Do you have any tips on the subject ?
Thanks in advance
Best regards
Amaury

Dear Amuary
Doubt if there is any solution in standard. Use exit so that thr first 3 inspection points gets activated quickly. Try these exits
QAPP0001
User exit QAPP 1 (create inspection point)
| QAPP0002 |User exit QAPP 2 (create inspection point & other data)
Regards
Gajesh

Inspection point in SAP QM

Similar Messages

Maybe you are looking for