Bad Performance on SQL 2005 multiserver installation

We have upgraded our server environment from  a single server solution with SQL 2000 and are now running on a multiserver solution with one DB server with SQL 2005 and two applictionservers.
And now we are experience a much slower performance in our new environment on all EVDRE reports. Is there anyone who know about any issue with a multiserver environment or SQL 2005 that makes the reports slower?
In our more advanced report with "expand by sheet" that took about 1 minute to expand on our old environment can take up to 10 minutes to expand in our new environment.
Both servers are running BPC 5.1 SP5 patch 1

The SQL Server version is very good and the performance problems should not come from there.
Please make sure you check the document from sd regarding
SAP_BPC_Performance_Tuning_Guide.doc to be sure you have the right configuration for OLAP and SQL and also application server.
Can you please provide an information regarding what kind of configuration do you have into this multiserver environment?
It is important also nr. of processors and memory for each server.
Do you have a maintenance plan for your SQL server database?
If you don't have that can cause again a big problem regarding performances.
Please run into management studio exec sp_updatestats for you database to be sure that you have at least update statistics.
So all these things mentioned before should be managed carefully to be sure that you have good performances into system.
From application point of view make sure that you schedule lite optimize to be sure that you don't have more than 40000 rows into wb table.
Regards
Sorin Radulescu

Similar Messages

  • SAP IDES ECC5.0 (SQL 2005 Database) installation Error at  Database instan.

    At the time IDES ECC 5.0 installation (SQL 2005 database), I was copy all DVD on Hard drive and start setup then at installation of database instance, following Errors are occured. so I cant continue with the installation, if anyone have installation guide/or solve the following error please mail me at [email protected]
    from Log file SAPCLUST
    Interface access functions from dynamic library dbmssslib.dll loaded.myCluster
    (3.5.Imp): 613: error when retrieving table description for physical table AABLG.
    myCluster (3.5.Imp): 614: return code received from nametab is 32
    myCluster (3.5.Imp): 296: error when retrieving physical nametab for table AABLG.
    (CNV) ERROR: code page conversion failed
                 rc = 2
    from sappool.log
    Interface access functions from dynamic library dbmssslib.dll loaded.failed to read short nametab of table ARCH_NUM     (rc=32)conversion failed for row 0 of table  VARKEY = ⁘††††††††††††††††††††††††
    (CNV) ERROR: code page conversion failed
    So please send me solution/ or any configuration need for SQL 2005 / installation guide thanks

    This may be hard disk problem, some file not able to write on HDD.
    Regards
    Rajnish

  • SQL 2005 Patch installation fail

    Hi all
    I am having error on installing KB2716429... currently the SQL server is build no. 9.0.5057
    here following is the error
    11/30/2013 09:46:45.484 ================================================================================
    11/30/2013 09:46:45.484 Hotfix package launched
    11/30/2013 09:46:45.500 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:45.500 Registry: Read registry key value "CommonFilesDir", string value = C:\Program Files\Common Files
    11/30/2013 09:46:45.500 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:45.500 Registry: Read registry key value "ProgramFilesDir", string value = C:\Program Files
    11/30/2013 09:46:45.515 Local Computer:
    11/30/2013 09:46:45.515 Target Details: SV53704
    11/30/2013 09:46:45.515   commonfilesdir = C:\Program Files\Common Files
    11/30/2013 09:46:45.515   lcidsupportdir = e:\6ce33de16cc8ba67b3e41388bb\1033
    11/30/2013 09:46:45.515   programfilesdir = C:\Program Files
    11/30/2013 09:46:45.515   programfilesdir_wow = C:\Program Files
    11/30/2013 09:46:45.515   supportdir = e:\6ce33de16cc8ba67b3e41388bb
    11/30/2013 09:46:45.515   supportdirlocal = e:\6ce33de16cc8ba67b3e41388bb
    11/30/2013 09:46:45.515   windir = C:\WINDOWS
    11/30/2013 09:46:45.515   winsysdir = C:\WINDOWS\system32
    11/30/2013 09:46:45.515   winsysdir_wow = C:\WINDOWS\SysWOW64
    11/30/2013 09:46:45.515
    11/30/2013 09:46:45.531 Enumerating applicable products for this patch
    11/30/2013 09:46:45.531 Found SQL 2005 product definition
    11/30/2013 09:46:45.531 Warning: Product HotFixSQL is missing LCID value
    11/30/2013 09:46:46.953 Enumeration: Determining QFE level for product instance MSSQLSERVER
    11/30/2013 09:46:46.969 Enumeration: Found following QFE level for product instance MSSQLSERVER: 5057
    11/30/2013 09:46:46.969 Enumeration: Determining GDR branching Hotfix for product instance MSSQLSERVER
    11/30/2013 09:46:46.969 Enumeration: Found following GDR branch hotfix for product instance MSSQLSERVER: 5292
    11/30/2013 09:46:46.969 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:46.984 Registry: Read registry key value "CommonFilesDir", string value = C:\Program Files\Common Files
    11/30/2013 09:46:46.984 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:46.984 Registry: Read registry key value "ProgramFilesDir", string value = C:\Program Files
    11/30/2013 09:46:46.984 Product discovery completed during the install process for MSSQLSERVER
    11/30/2013 09:46:46.984 SP Level check completed during the install process for MSSQLSERVER
    11/30/2013 09:46:46.984 Product language check completed during the install process for MSSQLSERVER
    11/30/2013 09:46:46.984 Product version check completed during the install process for MSSQLSERVER
    11/30/2013 09:46:46.984 Command-line instance name check completed during the install process
    11/30/2013 09:46:46.984 Baseline build check completed during the installation process for MSSQLSERVER
    11/30/2013 09:46:47.000 Baseline build check completed during the install process
    11/30/2013 09:46:47.000 Found OLAP Server 2005 product definition
    11/30/2013 09:46:47.000 Warning: Product HotFixAS is missing LCID value
    11/30/2013 09:46:48.453 Enumeration: Determining QFE level for product instance MSSQLSERVER
    11/30/2013 09:46:48.453 Enumeration: Associated hotfix build information not found for the following file: C:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\\Bin\msmdsrv.exe
    11/30/2013 09:46:48.453 Enumeration: Found following QFE level for product instance MSSQLSERVER: 5057
    11/30/2013 09:46:48.453 Enumeration: Determining GDR branching Hotfix for product instance MSSQLSERVER
    11/30/2013 09:46:48.453 Enumeration: Associated hotfix build information not found for the following file: C:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\\Bin\msmdsrv.exe
    11/30/2013 09:46:48.453 Enumeration: No GDR branch Hotfix found for product instance MSSQLSERVER
    11/30/2013 09:46:48.469 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:48.469 Registry: Read registry key value "CommonFilesDir", string value = C:\Program Files\Common Files
    11/30/2013 09:46:48.469 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:48.469 Registry: Read registry key value "ProgramFilesDir", string value = C:\Program Files
    11/30/2013 09:46:48.469 Product discovery completed during the install process for MSSQLSERVER
    11/30/2013 09:46:48.469 SP Level check completed during the install process for MSSQLSERVER
    11/30/2013 09:46:48.469 Product language check completed during the install process for MSSQLSERVER
    11/30/2013 09:46:48.484 Product version check completed during the install process for MSSQLSERVER
    11/30/2013 09:46:48.484 Command-line instance name check completed during the install process
    11/30/2013 09:46:48.484 Baseline build check completed during the installation process for MSSQLSERVER
    11/30/2013 09:46:48.484 Baseline build check completed during the install process
    11/30/2013 09:46:48.484 Found Notification Services 2005 product definition
    11/30/2013 09:46:48.484 Warning: Product HotFixNS is missing LCID value
    11/30/2013 09:46:50.015 Enumeration: Determining QFE level for product instance
    11/30/2013 09:46:50.047 Enumeration: Associated hotfix build information not found for the following file: C:\Program Files\Microsoft SQL Server\90\NotificationServices\9.0.242\\Bin\nsservice.exe
    11/30/2013 09:46:50.062 Enumeration: Found following QFE level for product instance : 5057
    11/30/2013 09:46:50.062 Enumeration: Determining GDR branching Hotfix for product instance
    11/30/2013 09:46:50.062 Enumeration: Associated hotfix build information not found for the following file: C:\Program Files\Microsoft SQL Server\90\NotificationServices\9.0.242\\Bin\nsservice.exe
    11/30/2013 09:46:50.062 Enumeration: Found following GDR branch hotfix for product instance : 5292
    11/30/2013 09:46:50.062 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:50.062 Registry: Read registry key value "CommonFilesDir", string value = C:\Program Files\Common Files
    11/30/2013 09:46:50.062 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:50.078 Registry: Read registry key value "ProgramFilesDir", string value = C:\Program Files
    11/30/2013 09:46:50.078 Product discovery completed during the install process for NS
    11/30/2013 09:46:50.078 SP Level check completed during the install process for NS
    11/30/2013 09:46:50.078 Product language check completed during the install process for NS
    11/30/2013 09:46:50.078 Product version check completed during the install process for NS
    11/30/2013 09:46:50.078 Baseline build check completed during the installation process for NS
    11/30/2013 09:46:50.078 Baseline build check completed during the install process
    11/30/2013 09:46:50.078 Found Report Server 2005 product definition
    11/30/2013 09:46:50.109 Warning: Product HotFixRS is missing LCID value
    11/30/2013 09:46:51.687 Enumeration: Determining QFE level for product instance MSSQLSERVER
    11/30/2013 09:46:51.703 Enumeration: Associated hotfix build information not found for the following file: C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\\ReportServer\bin\ReportingServicesService.exe
    11/30/2013 09:46:51.703 Enumeration: Found following QFE level for product instance MSSQLSERVER: 5057
    11/30/2013 09:46:51.703 Enumeration: Determining GDR branching Hotfix for product instance MSSQLSERVER
    11/30/2013 09:46:51.703 Enumeration: Associated hotfix build information not found for the following file: C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\\ReportServer\bin\ReportingServicesService.exe
    11/30/2013 09:46:51.703 Enumeration: Found following GDR branch hotfix for product instance MSSQLSERVER: 5292
    11/30/2013 09:46:51.703 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:51.703 Registry: Read registry key value "CommonFilesDir", string value = C:\Program Files\Common Files
    11/30/2013 09:46:51.703 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:51.703 Registry: Read registry key value "ProgramFilesDir", string value = C:\Program Files
    11/30/2013 09:46:51.703 Product discovery completed during the install process for MSSQLSERVER
    11/30/2013 09:46:51.703 SP Level check completed during the install process for MSSQLSERVER
    11/30/2013 09:46:51.703 Product language check completed during the install process for MSSQLSERVER
    11/30/2013 09:46:51.703 Product version check completed during the install process for MSSQLSERVER
    11/30/2013 09:46:51.719 Command-line instance name check completed during the install process
    11/30/2013 09:46:51.750 Baseline build check completed during the installation process for MSSQLSERVER
    11/30/2013 09:46:51.750 Baseline build check completed during the install process
    11/30/2013 09:46:51.765 Found DTS 2005 product definition
    11/30/2013 09:46:51.765 Warning: Product HotFixDTS is missing LCID value
    11/30/2013 09:46:53.359 Enumeration: Determining QFE level for product instance
    11/30/2013 09:46:53.375 Enumeration: Found following QFE level for product instance : 5057
    11/30/2013 09:46:53.375 Enumeration: Determining GDR branching Hotfix for product instance
    11/30/2013 09:46:53.375 Enumeration: Found following GDR branch hotfix for product instance : 5292
    11/30/2013 09:46:53.375 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:53.375 Registry: Read registry key value "CommonFilesDir", string value = C:\Program Files\Common Files
    11/30/2013 09:46:53.375 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:53.375 Registry: Read registry key value "ProgramFilesDir", string value = C:\Program Files
    11/30/2013 09:46:53.375 Product discovery completed during the install process for Integration Services
    11/30/2013 09:46:53.375 SP Level check completed during the install process for Integration Services
    11/30/2013 09:46:53.375 Product language check completed during the install process for Integration Services
    11/30/2013 09:46:53.375 Product version check completed during the install process for Integration Services
    11/30/2013 09:46:53.375 Baseline build check completed during the installation process for Integration Services
    11/30/2013 09:46:53.375 Baseline build check completed during the install process
    11/30/2013 09:46:53.390 Found SQL 2005 Tools product definition
    11/30/2013 09:46:53.390 Warning: Product HotFixTools is missing LCID value
    11/30/2013 09:46:54.953 Enumeration: Determining GDR branching Hotfix for product instance
    11/30/2013 09:46:54.969 Enumeration: Found following GDR branch hotfix for product instance : 5292
    11/30/2013 09:46:54.969 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:54.969 Registry: Read registry key value "CommonFilesDir", string value = C:\Program Files\Common Files
    11/30/2013 09:46:54.969 Registry: Opened registry key "SOFTWARE\Microsoft\Windows\CurrentVersion"
    11/30/2013 09:46:54.969 Registry: Read registry key value "ProgramFilesDir", string value = C:\Program Files
    11/30/2013 09:46:54.969 Product discovery completed during the install process for SQL Tools
    11/30/2013 09:46:54.969 SP Level check completed during the install process for SQL Tools
    11/30/2013 09:46:54.969 Product language check completed during the install process for SQL Tools
    11/30/2013 09:46:54.984 Product version check completed during the install process for SQL Tools
    11/30/2013 09:46:54.984 Baseline build check completed during the installation process for SQL Tools
    11/30/2013 09:46:54.984 Baseline build check completed during the install process
    11/30/2013 09:46:55.031 Product Enumeration Results:
    11/30/2013 09:46:55.031   INF File Name: e:\6ce33de16cc8ba67b3e41388bb\HotFixSQL.inf
    11/30/2013 09:46:55.031   arpfolder = SQL9_KB2716429_ENU
    11/30/2013 09:46:55.031   associatedhotfixbuild = 5320
    11/30/2013 09:46:55.031   baselinebuild = 5000
    11/30/2013 09:46:55.031   baselinebuildmax = 5069
    11/30/2013 09:46:55.031   build = 5069
    11/30/2013 09:46:55.031   description = SQL Server Database Services 2005
    11/30/2013 09:46:55.031   details = Patch for SQL Server Database Services 2005
    11/30/2013 09:46:55.031   installerlogpath = <PROGRAMFILESDIR>\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix
    11/30/2013 09:46:55.031   kbarticle = KB2716429
    11/30/2013 09:46:55.031   kbarticlehyperlink =
    http://support.microsoft.com/?kbid=2716429
    11/30/2013 09:46:55.031   legalproductname = SQL Server Database Services 2005
    11/30/2013 09:46:55.031   machinetype = x86
    11/30/2013 09:46:55.031   package = HotFixSQL
    11/30/2013 09:46:55.031   packagetype = GDR
    11/30/2013 09:46:55.031   productname = SQL9
    11/30/2013 09:46:55.047   relatedlinks = <LCIDSUPPORTDIR>\FinalSQL2005Information.rtf
    11/30/2013 09:46:55.047   servicepackname = Microsoft SQL Server 2005 Service Pack 4 Cumulative Hotfix 5069
    11/30/2013 09:46:55.047   splevel = 4
    11/30/2013 09:46:55.047   sqlutility = sqlcmd.exe
    11/30/2013 09:46:55.047   supportdir = e:\6ce33de16cc8ba67b3e41388bb
    11/30/2013 09:46:55.047   version = 9
    11/30/2013 09:46:55.047
    11/30/2013 09:46:55.047   File Group Details: MSP
    11/30/2013 09:46:55.047     parameters = SQLBUILD=5069 KBNUMBER=KB2716429 REBOOT=ReallySuppress
    11/30/2013 09:46:55.047     sourcepath = <SUPPORTDIR>\<PACKAGE>\Files
    11/30/2013 09:46:55.047     File Details: sqlrun_sql.msp
    11/30/2013 09:46:55.047
    11/30/2013 09:46:55.047   Instance Details: MSSQLSERVER
    11/30/2013 09:46:55.047     agentservicename = SQLSERVERAGENT
    11/30/2013 09:46:55.047     associatedhotfixbuild = 5292
    11/30/2013 09:46:55.047     clustername =
    11/30/2013 09:46:55.047     default = TRUE
    11/30/2013 09:46:55.047     ftsservicename = MSFTESQL
    11/30/2013 09:46:55.047     fullversion = 2005.090.5057.00
    11/30/2013 09:46:55.047     hiveregpath = Software\Microsoft\Microsoft SQL Server\MSSQL.1
    11/30/2013 09:46:55.047     id = MSSQL.1
    11/30/2013 09:46:55.062     installsqldatadir = C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL
    11/30/2013 09:46:55.062     installsqldir = C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL
    11/30/2013 09:46:55.062     lcid = 1033
    11/30/2013 09:46:55.062     name = MSSQLSERVER
    11/30/2013 09:46:55.062     productcode = {130A3BE1-85CC-4135-8EA7-5A724EE6CE2C}
    11/30/2013 09:46:55.062     qfelevel = 5057
    11/30/2013 09:46:55.062     servicename = MSSQLServer
    11/30/2013 09:46:55.062     sku = STANDARD
    11/30/2013 09:46:55.062     sp = 4
    11/30/2013 09:46:55.094     type = SQL Server Standalone Product
    11/30/2013 09:46:55.094     vermajbld = 5000
    11/30/2013 09:46:55.094     version = 9
    11/30/2013 09:46:55.109
    11/30/2013 09:46:55.125 Product Enumeration Results:
    11/30/2013 09:46:55.140   INF File Name: e:\6ce33de16cc8ba67b3e41388bb\HotFixAS.inf
    11/30/2013 09:46:55.140   arpfolder = OLAP9_KB2716429_ENU
    11/30/2013 09:46:55.140   associatedhotfixbuild = 5320
    11/30/2013 09:46:55.140   baselinebuild = 5000
    11/30/2013 09:46:55.140   baselinebuildmax = 5069
    11/30/2013 09:46:55.140   build = 5069
    11/30/2013 09:46:55.140   description = SQL Server Analysis Services 2005
    11/30/2013 09:46:55.140   details = Patch for Analysis Services 2005
    11/30/2013 09:46:55.140   installerlogpath = <PROGRAMFILESDIR>\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix
    11/30/2013 09:46:55.140   kbarticle = KB2716429
    11/30/2013 09:46:55.140   kbarticlehyperlink =
    http://support.microsoft.com/?kbid=2716429
    11/30/2013 09:46:55.140   legalproductname = SQL Server Analysis Services 2005
    11/30/2013 09:46:55.156   machinetype = x86
    11/30/2013 09:46:55.156   package = HotFixAS
    11/30/2013 09:46:55.156   packagetype = GDR
    11/30/2013 09:46:55.156   productname = OLAP9
    11/30/2013 09:46:55.156   relatedlinks = <LCIDSUPPORTDIR>\FinalSQL2005Information.rtf
    11/30/2013 09:46:55.156   servicepackname = Microsoft SQL Server 2005 Service Pack 4 Cumulative Hotfix 5069
    11/30/2013 09:46:55.156   splevel = 4
    11/30/2013 09:46:55.156   supportdir = e:\6ce33de16cc8ba67b3e41388bb
    11/30/2013 09:46:55.156   validateauthentication = true
    11/30/2013 09:46:55.156   version = 9
    11/30/2013 09:46:55.156
    11/30/2013 09:46:55.156   File Group Details: MSP
    11/30/2013 09:46:55.156     parameters = SQLBUILD=5069 KBNUMBER=KB2716429 REBOOT=ReallySuppress
    11/30/2013 09:46:55.156     sourcepath = <SUPPORTDIR>\<PACKAGE>\Files
    11/30/2013 09:46:55.172     File Details: sqlrun_as.msp
    11/30/2013 09:46:55.172
    11/30/2013 09:46:55.172   Instance Details: MSSQLSERVER
    11/30/2013 09:46:55.172     associatedhotfixbuild = 1520
    11/30/2013 09:46:55.172     clustername =
    11/30/2013 09:46:55.187     default = TRUE
    11/30/2013 09:46:55.203     fullversion = 2005.090.5057.00
    11/30/2013 09:46:55.219     hiveregpath = Software\Microsoft\Microsoft SQL Server\MSSQL.2
    11/30/2013 09:46:55.219     id = MSSQL.2
    11/30/2013 09:46:55.219     installsqldatadir = C:\Program Files\Microsoft SQL Server\
    11/30/2013 09:46:55.234     installsqldir = C:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\
    11/30/2013 09:46:55.250     lcid = 1033
    11/30/2013 09:46:55.265     name = MSSQLSERVER
    11/30/2013 09:46:55.297     olapservicename = MSSQLServerOLAPService
    11/30/2013 09:46:55.297     productcode = {8ABF8FEB-ABB0-40DC-9945-85AF36EF30A9}
    11/30/2013 09:46:55.297     qfelevel = 5057
    11/30/2013 09:46:55.297     servicename = MSSQLServerOLAPService
    11/30/2013 09:46:55.297     sku = STANDARD
    11/30/2013 09:46:55.297     sp = 4
    11/30/2013 09:46:55.297     type = Olap Standalone Product
    11/30/2013 09:46:55.297     vermajbld = 5000
    11/30/2013 09:46:55.297     version = 9
    11/30/2013 09:46:55.297
    11/30/2013 09:46:55.297 Product Enumeration Results:
    11/30/2013 09:46:55.297   INF File Name: e:\6ce33de16cc8ba67b3e41388bb\HotFixNS.inf
    11/30/2013 09:46:55.297   arpfolder = NS9_KB2716429_ENU
    11/30/2013 09:46:55.297   associatedhotfixbuild = 5320
    11/30/2013 09:46:55.297   baselinebuild = 5000
    11/30/2013 09:46:55.297   baselinebuildmax = 5069
    11/30/2013 09:46:55.297   build = 5069
    11/30/2013 09:46:55.297   description = SQL Server Notification Services 2005
    11/30/2013 09:46:55.297   details = Patch for SQL Server Notification Services 2005
    11/30/2013 09:46:55.297   installerlogpath = <PROGRAMFILESDIR>\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix
    11/30/2013 09:46:55.312   kbarticle = KB2716429
    11/30/2013 09:46:55.312   kbarticlehyperlink =
    http://support.microsoft.com/?kbid=2716429
    11/30/2013 09:46:55.312   legalproductname = SQL Server Notification Services 2005 instances
    11/30/2013 09:46:55.312   machinetype = x86
    11/30/2013 09:46:55.312   package = HotFixNS
    11/30/2013 09:46:55.312   packagetype = GDR
    11/30/2013 09:46:55.312   productname = NS9
    11/30/2013 09:46:55.312   recommendinstall = 1
    11/30/2013 09:46:55.312   relatedlinks = <LCIDSUPPORTDIR>\FinalSQL2005Information.rtf
    11/30/2013 09:46:55.312   servicepackname = Microsoft SQL Server 2005 Service Pack 4 Cumulative Hotfix 5069
    11/30/2013 09:46:55.312   splevel = 4
    11/30/2013 09:46:55.312   supportdir = e:\6ce33de16cc8ba67b3e41388bb
    11/30/2013 09:46:55.312   validateauthentication = true
    11/30/2013 09:46:55.312   version = 9
    11/30/2013 09:46:55.312
    11/30/2013 09:46:55.312   File Group Details: MSP
    11/30/2013 09:46:55.312     parameters = SQLBUILD=5069 KBNUMBER=KB2716429 REBOOT=ReallySuppress
    11/30/2013 09:46:55.312     sourcepath = <SUPPORTDIR>\<PACKAGE>\Files
    11/30/2013 09:46:55.312     File Details: sqlrun_ns.msp
    11/30/2013 09:46:55.312
    11/30/2013 09:46:55.312   Instance Details: NS
    11/30/2013 09:46:55.312     associatedhotfixbuild = 5292
    11/30/2013 09:46:55.328     clustername =
    11/30/2013 09:46:55.328     fullversion = 9.00.5057.00
    11/30/2013 09:46:55.328     hiveregpath = Software\Microsoft\Microsoft SQL Server\90\NS
    11/30/2013 09:46:55.328     id =
    11/30/2013 09:46:55.328     installsqldatadir =
    11/30/2013 09:46:55.328     installsqldir = C:\Program Files\Microsoft SQL Server\90\NotificationServices\9.0.242\
    11/30/2013 09:46:55.328     lcid = 1033
    11/30/2013 09:46:55.328     name =
    11/30/2013 09:46:55.375     productcode = {37E9AD9F-3217-4229-B5A5-7A0C82364C6C}
    11/30/2013 09:46:55.390     qfelevel = 5057
    11/30/2013 09:46:55.406     sku = STANDARD
    11/30/2013 09:46:55.406     sp = 4
    11/30/2013 09:46:55.406     type = Tools Only
    11/30/2013 09:46:55.406     vermajbld = 5000
    11/30/2013 09:46:55.422     version = 9
    11/30/2013 09:46:55.422
    11/30/2013 09:46:55.422 Product Enumeration Results:
    11/30/2013 09:46:55.422   INF File Name: e:\6ce33de16cc8ba67b3e41388bb\HotFixRS.inf
    11/30/2013 09:46:55.422   arpfolder = RS9_KB2716429_ENU
    11/30/2013 09:46:55.422   associatedhotfixbuild = 5320
    11/30/2013 09:46:55.422   baselinebuild = 5000
    11/30/2013 09:46:55.422   baselinebuildmax = 5069
    11/30/2013 09:46:55.422   build = 5069
    11/30/2013 09:46:55.453   description = SQL Server Reporting Services 2005
    11/30/2013 09:46:55.453   details = Patch for SQL Server Reporting Services 2005
    11/30/2013 09:46:55.453   installerlogpath = <PROGRAMFILESDIR>\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix
    11/30/2013 09:46:55.453   kbarticle = KB2716429
    11/30/2013 09:46:55.453   kbarticlehyperlink =
    http://support.microsoft.com/?kbid=2716429
    11/30/2013 09:46:55.453   legalproductname = SQL Server Reporting Services 2005
    11/30/2013 09:46:55.453   machinetype = x86
    11/30/2013 09:46:55.453   package = HotFixRS
    11/30/2013 09:46:55.453   packagetype = GDR
    11/30/2013 09:46:55.453   productname = RS9
    11/30/2013 09:46:55.469   relatedlinks = <LCIDSUPPORTDIR>\FinalSQL2005Information.rtf
    11/30/2013 09:46:55.469   servicepackname = Microsoft SQL Server 2005 Service Pack 4 Cumulative Hotfix 5069
    11/30/2013 09:46:55.469   splevel = 4
    11/30/2013 09:46:55.469   sqlutility = sqlcmd.exe
    11/30/2013 09:46:55.469   supportdir = e:\6ce33de16cc8ba67b3e41388bb
    11/30/2013 09:46:55.469   validateauthentication = true
    11/30/2013 09:46:55.469   version = 9
    11/30/2013 09:46:55.469
    11/30/2013 09:46:55.469   File Group Details: MSP
    11/30/2013 09:46:55.469     parameters = SQLBUILD=5069 KBNUMBER=KB2716429 REBOOT=ReallySuppress
    11/30/2013 09:46:55.469     sourcepath = <SUPPORTDIR>\<PACKAGE>\Files
    11/30/2013 09:46:55.469     File Details: sqlrun_rs.msp
    11/30/2013 09:46:55.469
    11/30/2013 09:46:55.469   Instance Details: MSSQLSERVER
    11/30/2013 09:46:55.469     associatedhotfixbuild = 5292
    11/30/2013 09:46:55.469     clustername =
    11/30/2013 09:46:55.469     default = TRUE
    11/30/2013 09:46:55.469     fullversion = 9.00.5057.00
    11/30/2013 09:46:55.469     hiveregpath = Software\Microsoft\Microsoft SQL Server\MSSQL.3
    11/30/2013 09:46:55.469     id = MSSQL.3
    11/30/2013 09:46:55.469     installsqldatadir =
    11/30/2013 09:46:55.469     installsqldir = C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\
    11/30/2013 09:46:55.484     lcid = 1033
    11/30/2013 09:46:55.484     name = MSSQLSERVER
    11/30/2013 09:46:55.484     productcode = {E930E839-998E-42F9-97E2-71FC960DB1B7}
    11/30/2013 09:46:55.484     qfelevel = 5057
    11/30/2013 09:46:55.484     rsservicename = ReportServer
    11/30/2013 09:46:55.484     servicename =
    11/30/2013 09:46:55.484     sku = STANDARD
    11/30/2013 09:46:55.484     sp = 4
    11/30/2013 09:46:55.484     type = Report Server Standalone Product
    11/30/2013 09:46:55.484     vermajbld = 5000
    11/30/2013 09:46:55.484     version = 9
    11/30/2013 09:46:55.484
    11/30/2013 09:46:55.484 Product Enumeration Results:
    11/30/2013 09:46:55.484   INF File Name: e:\6ce33de16cc8ba67b3e41388bb\HotFixDTS.inf
    11/30/2013 09:46:55.500   arpfolder = DTS9_KB2716429_ENU
    11/30/2013 09:46:55.625   associatedhotfixbuild = 5320
    11/30/2013 09:46:55.625   baselinebuild = 5000
    11/30/2013 09:46:55.625   baselinebuildmax = 5069
    11/30/2013 09:46:55.625   build = 5069
    11/30/2013 09:46:55.625   description = SQL Server Integration Services 2005
    11/30/2013 09:46:55.625   details = Patch for SQL Server Integration Services 2005
    11/30/2013 09:46:55.625   installerlogpath = <PROGRAMFILESDIR>\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix
    11/30/2013 09:46:55.625   kbarticle = KB2716429
    11/30/2013 09:46:55.625   kbarticlehyperlink =
    http://support.microsoft.com/?kbid=2716429
    11/30/2013 09:46:55.625   legalproductname = SQL Server Integration Services 2005
    11/30/2013 09:46:55.625   machinetype = x86
    11/30/2013 09:46:55.640   package = HotFixDTS
    11/30/2013 09:46:55.640   packagetype = GDR
    11/30/2013 09:46:55.640   productname = DTS9
    11/30/2013 09:46:55.640   recommendinstall = 1
    11/30/2013 09:46:55.640   relatedlinks = <LCIDSUPPORTDIR>\FinalSQL2005Information.rtf
    11/30/2013 09:46:55.640   servicepackname = Microsoft SQL Server 2005 Service Pack 4 Cumulative Hotfix 5069
    11/30/2013 09:46:55.640   splevel = 4
    11/30/2013 09:46:55.640   supportdir = e:\6ce33de16cc8ba67b3e41388bb
    11/30/2013 09:46:55.640   version = 9
    11/30/2013 09:46:55.640
    11/30/2013 09:46:55.640   File Group Details: MSP
    11/30/2013 09:46:55.640     parameters = SQLBUILD=5069 KBNUMBER=KB2716429 REBOOT=ReallySuppress
    11/30/2013 09:46:55.640     sourcepath = <SUPPORTDIR>\<PACKAGE>\Files
    11/30/2013 09:46:55.640     File Details: sqlrun_dts.msp
    11/30/2013 09:46:55.640
    11/30/2013 09:46:55.640   Instance Details: Integration Services
    11/30/2013 09:46:55.640     associatedhotfixbuild = 5292
    11/30/2013 09:46:55.640     clustername =
    11/30/2013 09:46:55.640     dtsservicename = MsDtsServer
    11/30/2013 09:46:55.640     fullversion = 9.00.5057.00
    11/30/2013 09:46:55.656     hiveregpath = Software\Microsoft\Microsoft SQL Server\90\DTS
    11/30/2013 09:46:55.656     id =
    11/30/2013 09:46:55.656     installsqldatadir =
    11/30/2013 09:46:55.656     installsqldir = C:\Program Files\Microsoft SQL Server\90\DTS\
    11/30/2013 09:46:55.656     lcid = 1033
    11/30/2013 09:46:55.656     name =
    11/30/2013 09:46:55.656     productcode = {EE8CFFD9-6E29-4DC3-A967-7348D5F41F44}
    11/30/2013 09:46:55.656     qfelevel = 5057
    11/30/2013 09:46:55.656     servicename = MsDtsServer
    11/30/2013 09:46:55.656     sku = STANDARD
    11/30/2013 09:46:55.656     sp = 4
    11/30/2013 09:46:55.656     type = Tools Only
    11/30/2013 09:46:55.656     vermajbld = 5000
    11/30/2013 09:46:55.656     version = 9
    11/30/2013 09:46:55.656
    11/30/2013 09:46:55.656 Product Enumeration Results:
    11/30/2013 09:46:55.672   INF File Name: e:\6ce33de16cc8ba67b3e41388bb\HotFixTools.inf
    11/30/2013 09:46:55.672   arpfolder = SQLTools9_KB2716429_ENU
    11/30/2013 09:46:55.672   associatedhotfixbuild = 5320
    11/30/2013 09:46:55.672   baselinebuild = 5000
    11/30/2013 09:46:55.672   baselinebuildmax = 5069
    11/30/2013 09:46:55.672   build = 5069
    11/30/2013 09:46:55.672   description = SQL Server Tools and Workstation Components 2005
    11/30/2013 09:46:55.672   details = Patch for SQL Server Tools and Workstation Components 2005
    11/30/2013 09:46:55.672   installerlogpath = <PROGRAMFILESDIR>\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix
    11/30/2013 09:46:55.672   kbarticle = KB2716429
    11/30/2013 09:46:55.672   kbarticlehyperlink =
    http://support.microsoft.com/?kbid=2716429
    11/30/2013 09:46:55.672   legalproductname = SQL Server Tools and Workstation Components 2005
    11/30/2013 09:46:55.672   machinetype = x86
    11/30/2013 09:46:55.672   package = HotFixTools
    11/30/2013 09:46:55.672   packagetype = GDR
    11/30/2013 09:46:55.672   productname = SQLTools9
    11/30/2013 09:46:55.672   recommendinstall = 1
    11/30/2013 09:46:55.672   relatedlinks = <LCIDSUPPORTDIR>\FinalSQL2005Information.rtf
    11/30/2013 09:46:55.672   servicepackname = Microsoft SQL Server 2005 Service Pack 4 Cumulative Hotfix 5069
    11/30/2013 09:46:55.672   splevel = 4
    11/30/2013 09:46:55.672   supportdir = e:\6ce33de16cc8ba67b3e41388bb
    11/30/2013 09:46:55.687   version = 9
    11/30/2013 09:46:55.687
    11/30/2013 09:46:55.687   File Group Details: MSP
    11/30/2013 09:46:55.687     parameters = SQLBUILD=5069 KBNUMBER=KB2716429 REBOOT=ReallySuppress
    11/30/2013 09:46:55.687     sourcepath = <SUPPORTDIR>\<PACKAGE>\Files
    11/30/2013 09:46:55.687     File Details: sqlrun_tools.msp
    11/30/2013 09:46:55.687
    11/30/2013 09:46:55.687   Instance Details: SQL Tools
    11/30/2013 09:46:55.687     associatedhotfixbuild = 5292
    11/30/2013 09:46:55.687     clustername =
    11/30/2013 09:46:55.687     fullversion = 9.4.5057
    11/30/2013 09:46:55.687     hiveregpath = Software\Microsoft\Microsoft SQL Server\90\Tools
    11/30/2013 09:46:55.687     id =
    11/30/2013 09:46:55.687     installsqldatadir =
    11/30/2013 09:46:55.687     installsqldir = C:\Program Files\Microsoft SQL Server\90\Tools\
    11/30/2013 09:46:55.687     lcid = 1033
    11/30/2013 09:46:55.687     name =
    11/30/2013 09:46:55.687     productcode = {1DD463C0-A50A-4394-B7E4-5895C02F9E0D}
    11/30/2013 09:46:55.687     qfelevel = 5057
    11/30/2013 09:46:55.687     sku = STANDARD
    11/30/2013 09:46:55.687     sp = 4
    11/30/2013 09:46:55.687     type = Tools Only
    11/30/2013 09:46:55.703     vermajbld = 5000
    11/30/2013 09:46:55.703     version = 9
    11/30/2013 09:46:55.703
    11/30/2013 09:47:00.781 Registry: Opened registry key "System\CurrentControlSet\Control\Session Manager"
    11/30/2013 09:47:00.781 Registry: Cannot read registry key value "PendingFileRenameOperations", error 0
    11/30/2013 09:47:00.812 Registry: Read registry key value "EnableErrorReporting", DWORD value = 0
    11/30/2013 09:47:00.828 Registry: Read registry key value "EnableErrorReporting", DWORD value = 0
    11/30/2013 09:47:00.828 Registry: Read registry key value "EnableErrorReporting", DWORD value = 0
    11/30/2013 09:47:00.828 Registry: Read registry key value "EnableErrorReporting", DWORD value = 0
    11/30/2013 09:47:00.828 Registry: Read registry key value "CustomerFeedBack", DWORD value = 0
    11/30/2013 09:47:00.828 Registry: Read registry key value "CustomerFeedBack", DWORD value = 0
    11/30/2013 09:47:00.828 Registry: Read registry key value "CustomerFeedBack", DWORD value = 0
    11/30/2013 09:47:00.828 Registry: Read registry key value "CustomerFeedBack", DWORD value = 0
    11/30/2013 09:47:01.703 Registry: Set registry key value "EnableErrorReporting", DWORD value = 0
    11/30/2013 09:47:01.703 Registry: Set registry key value "EnableErrorReporting", DWORD value = 0
    11/30/2013 09:47:01.703 Registry: Set registry key value "EnableErrorReporting", DWORD value = 0
    11/30/2013 09:47:01.703 Registry: Set registry key value "EnableErrorReporting", DWORD value = 0
    11/30/2013 09:47:01.703 Registry: Set registry key value "CustomerFeedBack", DWORD value = 0
    11/30/2013 09:47:01.703 Registry: Set registry key value "CustomerFeedBack", DWORD value = 0
    11/30/2013 09:47:01.703 Registry: Set registry key value "CustomerFeedBack", DWORD value = 0
    11/30/2013 09:47:01.719 Registry: Set registry key value "CustomerFeedBack", DWORD value = 0
    11/30/2013 09:47:01.734 Locked file: Checking for locked files
    11/30/2013 09:47:04.328 Attempting to pause the 32 bit ngen queue
    11/30/2013 09:47:04.968 Installing product: SQL9
    11/30/2013 09:47:05.781 Registry: Opened registry key "Software\Microsoft\Windows\CurrentVersion\Uninstall"
    11/30/2013 09:47:05.781 Installing instance: MSSQLSERVER
    11/30/2013 09:47:05.812 Installing target: SV53704
    11/30/2013 09:47:05.828 Installing file: sqlrun_sql.msp
    11/30/2013 09:47:05.828 Copy Engine: Creating MSP install log file at: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB2716429_sqlrun_sql.msp.log
    11/30/2013 09:47:05.828 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:05.828 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:06.203 MSP returned 1646: The patch package is not a removable patch package. Available beginning with Windows Installer version 3.0.
    11/30/2013 09:47:06.203 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:06.203 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:06.218 Copy Engine: Error, unable to install MSP file: e:\6ce33de16cc8ba67b3e41388bb\HotFixSQL\Files\sqlrun_sql.msp
    11/30/2013 09:47:06.218 The following exception occurred: Unable to install Windows Installer MSP file  Date: 11/30/2013 09:47:06.218  File: \depot\sqlvault\stable\setupmainl1\setup\sqlse\sqlsedll\copyengine.cpp  Line: 807
    11/30/2013 09:47:06.640 Watson: Param1 = Unknown
    11/30/2013 09:47:06.640 Watson: Param2 = 0x66e
    11/30/2013 09:47:06.640 Watson: Param3 = Unknown
    11/30/2013 09:47:06.640 Watson: Param4 = 0x66e
    11/30/2013 09:47:06.656 Watson: Param5 = copyengine.cpp@807
    11/30/2013 09:47:06.656 Watson: Param6 = Unknown
    11/30/2013 09:47:06.656 Watson: Param7 = SQL9
    11/30/2013 09:47:06.656 Watson: Param8 = @
    11/30/2013 09:47:06.656 Watson: Param9 = x86
    11/30/2013 09:47:06.656 Watson: Param10 = 5069
    11/30/2013 09:47:06.656 Installed product: SQL9
    11/30/2013 09:47:06.656 Installing product: OLAP9
    11/30/2013 09:47:07.468 Registry: Opened registry key "Software\Microsoft\Windows\CurrentVersion\Uninstall"
    11/30/2013 09:47:07.484 Installing instance: MSSQLSERVER
    11/30/2013 09:47:07.484 Installing target: SV53704
    11/30/2013 09:47:07.500 Installing file: sqlrun_as.msp
    11/30/2013 09:47:07.500 Copy Engine: Creating MSP install log file at: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\OLAP9_Hotfix_KB2716429_sqlrun_as.msp.log
    11/30/2013 09:47:07.515 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:07.515 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:07.640 MSP returned 1646: The patch package is not a removable patch package. Available beginning with Windows Installer version 3.0.
    11/30/2013 09:47:07.640 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:07.640 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:07.656 Copy Engine: Error, unable to install MSP file: e:\6ce33de16cc8ba67b3e41388bb\HotFixAS\Files\sqlrun_as.msp
    11/30/2013 09:47:07.656 The following exception occurred: Unable to install Windows Installer MSP file  Date: 11/30/2013 09:47:07.656  File: \depot\sqlvault\stable\setupmainl1\setup\sqlse\sqlsedll\copyengine.cpp  Line: 807
    11/30/2013 09:47:08.078 Watson: Param1 = Unknown
    11/30/2013 09:47:08.078 Watson: Param2 = 0x66e
    11/30/2013 09:47:08.078 Watson: Param3 = Unknown
    11/30/2013 09:47:08.078 Watson: Param4 = 0x66e
    11/30/2013 09:47:08.078 Watson: Param5 = copyengine.cpp@807
    11/30/2013 09:47:08.078 Watson: Param6 = Unknown
    11/30/2013 09:47:08.078 Watson: Param7 = OLAP9
    11/30/2013 09:47:08.078 Watson: Param8 = @
    11/30/2013 09:47:08.078 Watson: Param9 = x86
    11/30/2013 09:47:08.078 Watson: Param10 = 5069
    11/30/2013 09:47:08.078 Installed product: OLAP9
    11/30/2013 09:47:08.078 Installing product: RS9
    11/30/2013 09:47:08.875 Registry: Opened registry key "Software\Microsoft\Windows\CurrentVersion\Uninstall"
    11/30/2013 09:47:08.875 Installing instance: MSSQLSERVER
    11/30/2013 09:47:08.890 Installing target: SV53704
    11/30/2013 09:47:08.890 Installing file: sqlrun_rs.msp
    11/30/2013 09:47:08.890 Copy Engine: Creating MSP install log file at: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\RS9_Hotfix_KB2716429_sqlrun_rs.msp.log
    11/30/2013 09:47:08.890 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:08.890 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:09.015 MSP returned 1646: The patch package is not a removable patch package. Available beginning with Windows Installer version 3.0.
    11/30/2013 09:47:09.015 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:09.015 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:09.031 Copy Engine: Error, unable to install MSP file: e:\6ce33de16cc8ba67b3e41388bb\HotFixRS\Files\sqlrun_rs.msp
    11/30/2013 09:47:09.047 The following exception occurred: Unable to install Windows Installer MSP file  Date: 11/30/2013 09:47:09.047  File: \depot\sqlvault\stable\setupmainl1\setup\sqlse\sqlsedll\copyengine.cpp  Line: 807
    11/30/2013 09:47:09.593 Watson: Param1 = Unknown
    11/30/2013 09:47:09.593 Watson: Param2 = 0x66e
    11/30/2013 09:47:09.593 Watson: Param3 = Unknown
    11/30/2013 09:47:09.609 Watson: Param4 = 0x66e
    11/30/2013 09:47:09.609 Watson: Param5 = copyengine.cpp@807
    11/30/2013 09:47:09.609 Watson: Param6 = Unknown
    11/30/2013 09:47:09.609 Watson: Param7 = RS9
    11/30/2013 09:47:09.609 Watson: Param8 = @
    11/30/2013 09:47:09.609 Watson: Param9 = x86
    11/30/2013 09:47:09.609 Watson: Param10 = 5069
    11/30/2013 09:47:09.625 Installed product: RS9
    11/30/2013 09:47:09.625 Installing product: NS9
    11/30/2013 09:47:10.406 Registry: Opened registry key "Software\Microsoft\Windows\CurrentVersion\Uninstall"
    11/30/2013 09:47:10.406 Installing instance: NS
    11/30/2013 09:47:10.422 Installing target: SV53704
    11/30/2013 09:47:10.422 Installing file: sqlrun_ns.msp
    11/30/2013 09:47:10.422 Copy Engine: Creating MSP install log file at: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\NS9_Hotfix_KB2716429_sqlrun_ns.msp.log
    11/30/2013 09:47:10.422 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:10.422 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:10.531 MSP returned 1646: The patch package is not a removable patch package. Available beginning with Windows Installer version 3.0.
    11/30/2013 09:47:10.531 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:10.531 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:10.547 Copy Engine: Error, unable to install MSP file: e:\6ce33de16cc8ba67b3e41388bb\HotFixNS\Files\sqlrun_ns.msp
    11/30/2013 09:47:10.547 The following exception occurred: Unable to install Windows Installer MSP file  Date: 11/30/2013 09:47:10.547  File: \depot\sqlvault\stable\setupmainl1\setup\sqlse\sqlsedll\copyengine.cpp  Line: 807
    11/30/2013 09:47:10.890 Watson: Param1 = Unknown
    11/30/2013 09:47:10.890 Watson: Param2 = 0x66e
    11/30/2013 09:47:10.890 Watson: Param3 = Unknown
    11/30/2013 09:47:10.890 Watson: Param4 = 0x66e
    11/30/2013 09:47:10.890 Watson: Param5 = copyengine.cpp@807
    11/30/2013 09:47:10.890 Watson: Param6 = Unknown
    11/30/2013 09:47:10.890 Watson: Param7 = NS9
    11/30/2013 09:47:10.890 Watson: Param8 = @
    11/30/2013 09:47:10.890 Watson: Param9 = x86
    11/30/2013 09:47:10.890 Watson: Param10 = 5069
    11/30/2013 09:47:10.890 Installed product: NS9
    11/30/2013 09:47:10.890 Installing product: DTS9
    11/30/2013 09:47:11.703 Registry: Opened registry key "Software\Microsoft\Windows\CurrentVersion\Uninstall"
    11/30/2013 09:47:11.703 Installing instance: Integration Services
    11/30/2013 09:47:11.703 Installing target: SV53704
    11/30/2013 09:47:11.703 Installing file: sqlrun_dts.msp
    11/30/2013 09:47:11.703 Copy Engine: Creating MSP install log file at: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\DTS9_Hotfix_KB2716429_sqlrun_dts.msp.log
    11/30/2013 09:47:11.703 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:11.718 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:11.890 MSP returned 1646: The patch package is not a removable patch package. Available beginning with Windows Installer version 3.0.
    11/30/2013 09:47:11.890 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:11.906 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:11.906 Copy Engine: Error, unable to install MSP file: e:\6ce33de16cc8ba67b3e41388bb\HotFixDTS\Files\sqlrun_dts.msp
    11/30/2013 09:47:11.922 The following exception occurred: Unable to install Windows Installer MSP file  Date: 11/30/2013 09:47:11.922  File: \depot\sqlvault\stable\setupmainl1\setup\sqlse\sqlsedll\copyengine.cpp  Line: 807
    11/30/2013 09:47:12.328 Watson: Param1 = Unknown
    11/30/2013 09:47:12.328 Watson: Param2 = 0x66e
    11/30/2013 09:47:12.328 Watson: Param3 = Unknown
    11/30/2013 09:47:12.328 Watson: Param4 = 0x66e
    11/30/2013 09:47:12.328 Watson: Param5 = copyengine.cpp@807
    11/30/2013 09:47:12.328 Watson: Param6 = Unknown
    11/30/2013 09:47:12.328 Watson: Param7 = DTS9
    11/30/2013 09:47:12.328 Watson: Param8 = @
    11/30/2013 09:47:12.328 Watson: Param9 = x86
    11/30/2013 09:47:12.328 Watson: Param10 = 5069
    11/30/2013 09:47:12.343 Installed product: DTS9
    11/30/2013 09:47:12.343 Installing product: SQLTools9
    11/30/2013 09:47:13.125 Registry: Opened registry key "Software\Microsoft\Windows\CurrentVersion\Uninstall"
    11/30/2013 09:47:13.140 Installing instance: SQL Tools
    11/30/2013 09:47:13.140 Installing target: SV53704
    11/30/2013 09:47:13.156 Installing file: sqlrun_tools.msp
    11/30/2013 09:47:13.172 Copy Engine: Creating MSP install log file at: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQLTools9_Hotfix_KB2716429_sqlrun_tools.msp.log
    11/30/2013 09:47:13.172 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:13.172 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:13.484 MSP returned 1646: The patch package is not a removable patch package. Available beginning with Windows Installer version 3.0.
    11/30/2013 09:47:13.484 Registry: Opened registry key "Software\Policies\Microsoft\Windows\Installer"
    11/30/2013 09:47:13.484 Registry: Cannot read registry key value "Debug", error 0
    11/30/2013 09:47:13.500 Copy Engine: Error, unable to install MSP file: e:\6ce33de16cc8ba67b3e41388bb\HotFixTools\Files\sqlrun_tools.msp
    11/30/2013 09:47:13.500 The following exception occurred: Unable to install Windows Installer MSP file  Date: 11/30/2013 09:47:13.500  File: \depot\sqlvault\stable\setupmainl1\setup\sqlse\sqlsedll\copyengine.cpp  Line: 807
    11/30/2013 09:47:13.828 Watson: Param1 = Unknown
    11/30/2013 09:47:13.828 Watson: Param2 = 0x66e
    11/30/2013 09:47:13.843 Watson: Param3 = Unknown
    11/30/2013 09:47:13.843 Watson: Param4 = 0x66e
    11/30/2013 09:47:13.843 Watson: Param5 = copyengine.cpp@807
    11/30/2013 09:47:13.843 Watson: Param6 = Unknown
    11/30/2013 09:47:13.843 Watson: Param7 = SQLTools9
    11/30/2013 09:47:13.843 Watson: Param8 = @
    11/30/2013 09:47:13.843 Watson: Param9 = x86
    11/30/2013 09:47:13.843 Watson: Param10 = 5069
    11/30/2013 09:47:13.843 Installed product: SQLTools9
    11/30/2013 09:47:13.843 Hotfix package completed
    11/30/2013 09:47:13.859 Attempting to continue the 32 bit ngen queue

    Hi ~ any idea on this case ? here is the one MSP installation log:
    === Verbose logging started: 11/30/2013  21:28:15  Build type: SHIP UNICODE 4.05.6001.00  Calling process: e:\de60d5388bc787220900e629b152c9\hotfix.exe ===
    MSI (c) (D4:28) [21:28:15:681]: Resetting cached policy values
    MSI (c) (D4:28) [21:28:15:681]: Machine policy value 'Debug' is 0
    MSI (c) (D4:28) [21:28:15:681]: ******* RunEngine:
               ******* Product: {EE8CFFD9-6E29-4DC3-A967-7348D5F41F44}
               ******* Action: 
               ******* CommandLine: **********
    MSI (c) (D4:28) [21:28:15:681]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (D4:28) [21:28:15:681]: Grabbed execution mutex.
    MSI (c) (D4:28) [21:28:15:697]: Cloaking enabled.
    MSI (c) (D4:28) [21:28:15:697]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (D4:28) [21:28:15:697]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (A8:C0) [21:28:15:697]: Running installation inside multi-package transaction {EE8CFFD9-6E29-4DC3-A967-7348D5F41F44}
    MSI (s) (A8:C0) [21:28:15:697]: Grabbed execution mutex.
    MSI (s) (A8:04) [21:28:15:697]: Resetting cached policy values
    MSI (s) (A8:04) [21:28:15:697]: Machine policy value 'Debug' is 0
    MSI (s) (A8:04) [21:28:15:697]: ******* RunEngine:
               ******* Product: {EE8CFFD9-6E29-4DC3-A967-7348D5F41F44}
               ******* Action: 
               ******* CommandLine: **********
    MSI (s) (A8:04) [21:28:15:697]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (A8:04) [21:28:15:931]: End dialog not enabled
    MSI (s) (A8:04) [21:28:15:931]: Original package ==> C:\WINDOWS\Installer\181c1.msi
    MSI (s) (A8:04) [21:28:15:931]: Package we're running from ==> C:\WINDOWS\Installer\181c1.msi
    MSI (s) (A8:04) [21:28:15:994]: APPCOMPAT: looking for appcompat database entry with ProductCode '{EE8CFFD9-6E29-4DC3-A967-7348D5F41F44}'.
    MSI (s) (A8:04) [21:28:15:994]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (A8:04) [21:28:15:994]: Opening existing patch 'C:\WINDOWS\Installer\e9ff36e.msp'.
    MSI (s) (A8:04) [21:28:16:010]: Opening existing patch 'C:\WINDOWS\Installer\239697ae.msp'.
    MSI (s) (A8:04) [21:28:16:056]: File will have security applied from OpCode.
    MSI (s) (A8:04) [21:28:16:056]: Original patch ==> e:\de60d5388bc787220900e629b152c9\HotFixDTS\Files\sqlrun_dts.msp
    MSI (s) (A8:04) [21:28:16:056]: Patch we're running from ==> C:\WINDOWS\Installer\1f80a9f.msp
    MSI (s) (A8:04) [21:28:16:072]: SOFTWARE RESTRICTION POLICY: Verifying patch --> 'e:\de60d5388bc787220900e629b152c9\HotFixDTS\Files\sqlrun_dts.msp' against software restriction policy
    MSI (s) (A8:04) [21:28:16:072]: Note: 1: 2262 2: DigitalSignature 3: -2147287038 
    MSI (s) (A8:04) [21:28:16:072]: SOFTWARE RESTRICTION POLICY: e:\de60d5388bc787220900e629b152c9\HotFixDTS\Files\sqlrun_dts.msp is not digitally signed
    MSI (s) (A8:04) [21:28:16:072]: SOFTWARE RESTRICTION POLICY: e:\de60d5388bc787220900e629b152c9\HotFixDTS\Files\sqlrun_dts.msp is permitted to run at the 'unrestricted' authorization level.
    MSI (s) (A8:04) [21:28:16:072]: SequencePatches starts. Product code: {EE8CFFD9-6E29-4DC3-A967-7348D5F41F44}, Product version: 9.00.1399.06, Upgrade code: {2B33A057-4470-45CD-8E63-863CB78FC626}, Product language 1033
    MSI (s) (A8:04) [21:28:16:072]: Note: 1: 2262 2: _Tables 3: -2147287038 
    MSI (s) (A8:04) [21:28:16:072]: Note: 1: 2262 2: _Columns 3: -2147287038 
    MSI (s) (A8:04) [21:28:16:072]: Note: 1: 2262 2: _Tables 3: -2147287038 
    MSI (s) (A8:04) [21:28:16:072]: Note: 1: 2262 2: _Columns 3: -2147287038 
    MSI (s) (A8:04) [21:28:16:072]: PATCH SEQUENCER: verifying the applicability of QFE patch e:\de60d5388bc787220900e629b152c9\HotFixDTS\Files\sqlrun_dts.msp against product code: {EE8CFFD9-6E29-4DC3-A967-7348D5F41F44}, product version: 9.00.1399.06, product language
    1033 and upgrade code: {2B33A057-4470-45CD-8E63-863CB78FC626}
    MSI (s) (A8:04) [21:28:16:072]: PATCH SEQUENCER: QFE patch e:\de60d5388bc787220900e629b152c9\HotFixDTS\Files\sqlrun_dts.msp is not applicable.
    MSI (s) (A8:04) [21:28:16:072]: SequencePatches returns success.
    MSI (s) (A8:04) [21:28:16:072]: Final Patch Application Order:
    MSI (s) (A8:04) [21:28:16:072]: Other Patches:
    MSI (s) (A8:04) [21:28:16:072]: Unknown\Absent: {4C3BC5C8-67A5-40F1-85B7-D9341A5F7B6C} - e:\de60d5388bc787220900e629b152c9\HotFixDTS\Files\sqlrun_dts.msp
    MSI (s) (A8:04) [21:28:16:072]: Superseded: {5E9ADA2D-3132-42CF-8628-D2ADA0F335EE} - 
    MSI (s) (A8:04) [21:28:16:072]: Superseded: {32BCE9F2-8686-487A-80A9-A401C0F7DCBD} - 
    MSI (s) (A8:04) [21:28:16:072]: Unknown\Absent: {D23D25E7-0AB4-41EE-81B5-F0CF34D1BA2B} - 
    MSI (s) (A8:04) [21:28:16:072]: Unknown\Absent: {CF321155-04AA-4CF8-BB9A-DA3144835E3E} - 
    MSI (s) (A8:04) [21:28:16:072]: Machine policy value 'DisablePatch' is 0
    MSI (s) (A8:04) [21:28:16:072]: Machine policy value 'AllowLockdownPatch' is 0
    MSI (s) (A8:04) [21:28:16:072]: Machine policy value 'DisableLUAPatching' is 0
    MSI (s) (A8:04) [21:28:16:072]: Disallowing uninstallation of patch {CF321155-04AA-4CF8-BB9A-DA3144835E3E} because the patch is marked as not uninstallable
    MSI (s) (A8:04) [21:28:16:072]: Product: Microsoft SQL Server 2005 Integration Services - Update 'Service Pack 4 for SQL Server Integration Services 2005 ENU (KB2463332)' could not be removed. Error code 1646. Additional information is available in the log
    file C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\DTS9_Hotfix_KB2716429_sqlrun_dts.msp.log.
    MSI (s) (A8:04) [21:28:16:072]: Windows Installer removed an update. Product Name: Microsoft SQL Server 2005 Integration Services. Product Version: 9.00.1399.06. Product Language: 1033. Update Name: Service Pack 4 for SQL Server Integration Services 2005 ENU
    (KB2463332). Removal success or error status: 0.
    MSI (s) (A8:04) [21:28:16:072]: Product: Microsoft SQL Server 2005 Integration Services - Update '{4C3BC5C8-67A5-40F1-85B7-D9341A5F7B6C}' could not be installed. Error code 1646. Additional information is available in the log file C:\Program Files\Microsoft
    SQL Server\90\Setup Bootstrap\LOG\Hotfix\DTS9_Hotfix_KB2716429_sqlrun_dts.msp.log.
    MSI (s) (A8:04) [21:28:16:072]: Windows Installer installed an update. Product Name: Microsoft SQL Server 2005 Integration Services. Product Version: 9.00.1399.06. Product Language: 1033. Update Name: {4C3BC5C8-67A5-40F1-85B7-D9341A5F7B6C}. Installation success
    or error status: 1646.
    MSI (s) (A8:04) [21:28:16:072]: Product: Microsoft SQL Server 2005 Integration Services - Update 'GDR 5057 for SQL Server Integration Services 2005 ENU (KB2494120)' could not be removed. Error code 1646. Additional information is available in the log file C:\Program
    Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\DTS9_Hotfix_KB2716429_sqlrun_dts.msp.log.
    MSI (s) (A8:04) [21:28:16:072]: Windows Installer removed an update. Product Name: Microsoft SQL Server 2005 Integration Services. Product Version: 9.00.1399.06. Product Language: 1033. Update Name: GDR 5057 for SQL Server Integration Services 2005 ENU (KB2494120).
    Removal success or error status: 1646.
    MSI (s) (A8:04) [21:28:16:072]: Note: 1: 1708 
    MSI (s) (A8:04) [21:28:16:072]: Product: Microsoft SQL Server 2005 Integration Services -- Installation failed.
    MSI (s) (A8:04) [21:28:16:072]: Windows Installer installed the product. Product Name: Microsoft SQL Server 2005 Integration Services. Product Version: 9.00.1399.06. Product Language: 1033. Installation success or error status: 1646.
    MSI (s) (A8:04) [21:28:16:088]: Attempting to delete file C:\WINDOWS\Installer\1f80a9f.msp
    MSI (s) (A8:04) [21:28:16:088]: MainEngineThread is returning 1646
    MSI (s) (A8:C0) [21:28:16:088]: No System Restore sequence number for this installation.
    Uninstallation of the patch package is not supported.
    C:\WINDOWS\Installer\181c1.msi
    MSI (s) (A8:C0) [21:28:16:088]: User policy value 'DisableRollback' is 0
    MSI (s) (A8:C0) [21:28:16:088]: Machine policy value 'DisableRollback' is 0
    MSI (s) (A8:C0) [21:28:16:088]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (A8:C0) [21:28:16:088]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 
    MSI (s) (A8:C0) [21:28:16:088]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 
    MSI (s) (A8:C0) [21:28:16:088]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 
    MSI (s) (A8:C0) [21:28:16:088]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 
    MSI (s) (A8:C0) [21:28:16:088]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (A8:C0) [21:28:16:088]: Restoring environment variables
    MSI (c) (D4:28) [21:28:16:088]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (D4:28) [21:28:16:088]: MainEngineThread is returning 1646
    === Verbose logging stopped: 11/30/2013  21:28:16 ===

  • The acount information could not be verified - SQL 2005 SP3 installation on Windows 2008 R2 Failover Cluster

    Hi,
    We have a problem when we are trying to install SQL SP3 on SQL 2005 cluster.
    The problem is described bellow:
    We installed a new Windows 2008 R2 x64 failover cluster with two nodes.
    As a next step we installed SQL 2005 Enterprise edition x64 on this failover cluster. We have finished the installation without problems. After SQL installation we are trying to install SQL SP3 . We have logged on using a domain administrator account and
    we start the installation of SP3 with that user. In authentication mode screen the test gives a success status using either domain administrator-windows authentication or sa-sql authentication. On remote user account screen, when we give the domain
    administrator account we get the message "the account information could not be verified. Press ok to return to authentication mode screen to determine the reason for failure".
    We have tried to give the SQL services startup user on remote user account screen but the error is the same.
    the domain administrator account exists on security logins of SQL with sysadmin rights.
    Can someone help?
    Thanks. 

    Hi StelioMavro,
    According to your error message, when you install SQL Server 2005 SP3 in your failover cluster, we need to verify if there was other instance that had been removed and the installation did not pass the login check. I recommend you use windows authentication
    instead of SQL Server authentication when applying SP3. And the windows account used to run the SP3 setup program must have administrator privileges on the computer where SP3 will be installed.
    For more information about how to install SQL Server 2005 SP3 in failover cluster, you can review the following article.
    http://www.sqlcoffee.com/Tips0007.htm
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Sql 2005 express installation (Vista Ultimate)

    While installing SQL Server 2005 Express Edition SP2 or SQL Server 2005 Express Edition with Advanced Services SP2
    on Vista Ultimate,  I get the error "The feature(s) selected are not valid for this edition of SQL server".  Then the installation stops and exist. The only feature selected is Database Services, data files and shared tools.
    HELP!  

    Thank you in advance for your response.  I have listed below my system configuration check and the error message text.
    System Configuration Check
    - WMI Service Requirement (Success)
    Messages
    · WMI Service Requirement
    · Check Passed
    - MSXML Requirement (Success)
    Messages
    · MSXML Requirement
    · Check Passed
    - Operating System Minimum Level Requirement (Success)
    Messages
    · Operating System Minimum Level Requirement
    · Check Passed
    - Operating System Service Pack Level Requirement. (Success)
    Messages
    · Operating System Service Pack Level Requirement.
    · Check Passed
    - SQL Server Edition Operating System Compatibility (Success)
    Messages
    · SQL Server Edition Operating System Compatibility
    · Check Passed
    - Minimum Hardware Requirement (Success)
    Messages
    · Minimum Hardware Requirement
    · Check Passed
    - IIS Feature Requirement (Success)
    Messages
    · IIS Feature Requirement
    · Check Passed
    - Pending Reboot Requirement (Success)
    Messages
    · Pending Reboot Requirement
    · Check Passed
    - Performance Monitor Counter Requirement (Success)
    Messages
    · Performance Monitor Counter Requirement
    · Check Passed
    - Default Installation Path Permission Requirement (Success)
    Messages
    · Default Installation Path Permission Requirement
    · Check Passed
    - Internet Explorer Requirement (Success)
    Messages
    · Internet Explorer Requirement
    · Check Passed
    - COM Plus Catalog Requirement (Success)
    Messages
    · COM Plus Catalog Requirement
    · Check Passed
    - ASP.Net Version Registration Requirement (Success)
    Messages
    · ASP.Net Version Registration Requirement
    · Check Passed
    - Minimum MDAC Version Requirement (Success)
    Messages
    · Minimum MDAC Version Requirement
    · Check Passed
    - Edition Change Check (Success)
    Messages
    · Edition Change Check
    · Check Passed
    ====================================================================================================
    After selecting the database feature only, this error message below pop up and the install quits and exit.
    TITLE: Microsoft SQL Server 2005 Setup
    The feature(s) specified are not valid for this edition of SQL Server.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=70031&EvtType=sqlchaining%5csqlchainingactions.cpp%40DeterminePackageTransformsAction%40sqls%3a%3aDeterminePackageTransformsAction%3a%3aperform%400x1118f
    BUTTONS:
    OK

  • Xp_logininfo "Installation problem on windows 2003 with Sql 2005"

    Hi every one
    I am facing a problem during the installation of Solution Manager 4.0 on Windows 2003 server with Ms Sql 2005, I received the following error
    Msg 15404, Level 16, State 19, Procedure xp_logininfo, Line 60.
    Its some how look likes that the user "SID"ADM
    Can any one give me a clue
    thanks
    Kind Regards
    Sohail

    Hi All,
    This would solve your problem
    First of all this error is <b>MSSQL error</b>.
    When you perform an action on an instance of SQL Server that requires SQL Server to resolve the credentials of a Microsoft Windows NT domain user account, you may receive an error message that is similar
    Server: Msg 8198, Level 16, State XX, Procedure <Stored Procedure Name>, Line <line Number>
    Could not obtain information about Windows NT group/user '<Domain\Account Name>'.
    To resolve the credentials of a Windows NT domain user account, SQL Server uses the xp_logininfo system stored procedure. Here is a list of the common scenarios where you may notice that the xp_logininfo system stored procedure fails and causes the 8198 error.
    • When you use an xp_sendmail extended stored procedure.
    • When you set up replication.
    • When you run a SQL Server Agent job.
    SQL Server may run the xp_logininfo system stored procedure to retrieve information about the Windows domains and the user accounts, even if the user does not do so explicitly. Therefore, if you receive an 8198 error message and the error message mentions the xp_logininfo system stored procedure as the procedure, you must use <b>SQL Profiler</b> to trace and to troubleshoot the exact point of failure.
    You can go through this link for more info...
    http://support.microsoft.com/?kbid=834124
    Feel Free to Revert back...
    --Thanks and Regards,
    Ragu
    ERP,
    Suzlon Energy Limted, Pune
    Extn: 2638
    +919370675797
    I have no limits for others sky is only a reason

  • Unable to install SQL 2005 Service Pack 3 (Unable to install Windows Installer MSI file)

    I'm unable to install SQL 2005 Service Pack 3. This results in the following error message: Unable to install Windows Installer MSI file.
    Could someone please help me. Thanks in advance!
    === Verbose logging started: 3-4-2009  9:33:00  Build type: SHIP UNICODE 4.05.6001.00  Calling process: d:\5ddfa356349ddf2e676c336d95c5\hotfix.exe ===
    MSI (c) (E0:88) [09:33:00:404]: Resetting cached policy values
    MSI (c) (E0:88) [09:33:00:404]: Machine policy value 'Debug' is 0
    MSI (c) (E0:88) [09:33:00:404]: ******* RunEngine:
               ******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (E0:88) [09:33:00:404]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (E0:88) [09:33:00:404]: Grabbed execution mutex.
    MSI (c) (E0:88) [09:33:00:419]: Cloaking enabled.
    MSI (c) (E0:88) [09:33:00:419]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (E0:88) [09:33:00:419]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (28:28) [09:33:01:747]: Running installation inside multi-package transaction C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
    MSI (s) (28:28) [09:33:01:747]: Grabbed execution mutex.
    MSI (s) (28:CC) [09:33:02:029]: Resetting cached policy values
    MSI (s) (28:CC) [09:33:02:029]: Machine policy value 'Debug' is 0
    MSI (s) (28:CC) [09:33:02:029]: ******* RunEngine:
               ******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (28:CC) [09:33:02:685]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (28:CC) [09:33:03:450]: File will have security applied from OpCode.
    MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi' against software restriction policy
    MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi has a digital signature
    MSI (s) (28:CC) [09:33:04:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi is permitted to run at the 'unrestricted' authorization level.
    MSI (s) (28:CC) [09:33:04:888]: End dialog not enabled
    MSI (s) (28:CC) [09:33:04:888]: Original package ==> C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
    MSI (s) (28:CC) [09:33:04:888]: Package we're running from ==> C:\WINDOWS\Installer\3d3a713.msi
    MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: looking for appcompat database entry with ProductCode '{53F5C3EE-05ED-4830-994B-50B2F0D50FCE}'.
    MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (28:CC) [09:33:05:685]: MSCOREE not loaded loading copy from system32
    MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\2f1994e.msi 3: -2147287038
    MSI (s) (28:CC) [09:33:05:825]: Opening existing patch 'C:\WINDOWS\Installer\e6ba0.msp'.
    MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\e6ba0.msp 3: -2147287038
    MSI (s) (28:CC) [09:33:05:825]: Couldn't find local patch 'C:\WINDOWS\Installer\e6ba0.msp'. Looking for it at its source.
    MSI (s) (28:CC) [09:33:05:825]: Resolving Patch source.
    MSI (s) (28:CC) [09:33:05:825]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (28:CC) [09:33:05:825]: User policy value 'DisableMedia' is 0
    MSI (s) (28:CC) [09:33:05:825]: Machine policy value 'AllowLockdownMedia' is 0
    MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media enabled only if package is safe.
    MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Looking for sourcelist for product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
    MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Adding {EE92F683-5F5C-4970-BB0B-9AC591B60268}; to potential sourcelist list (pcode;disk;relpath).
    MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Now checking product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
    MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media is enabled for product.
    MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
    MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Trying source \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\.
    MSI (s) (28:CC) [09:33:06:607]: Note: 1: 2203 2: \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\SqlSupport.msp 3: -2147287037
    MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
    MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
    MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing net source list.
    MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
    MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing media source list.
    MSI (s) (28:CC) [09:33:07:654]: SOURCEMGMT: Resolved source to: 'SqlSupport.msp'
    MSI (s) (28:CC) [09:33:37:732]: Note: 1: 1314 2: SqlSupport.msp
    MSI (s) (28:CC) [09:33:37:732]: Unable to create a temp copy of patch 'SqlSupport.msp'.
    MSI (s) (28:CC) [09:33:37:732]: Searching provided command line patches for patch code {EE92F683-5F5C-4970-BB0B-9AC591B60268}
    MSI (s) (28:CC) [09:33:37:763]: Note: 1: 1708
    MSI (s) (28:CC) [09:33:37:763]: Product: Microsoft SQL Server Setup Support Files (English) -- Installation failed.
    MSI (s) (28:CC) [09:33:37:763]: Windows Installer installed the product. Product Name: Microsoft SQL Server Setup Support Files (English). Product Version: 9.00.4035.00. Product Language: 1033. Installation success or error status: 1635.
    MSI (s) (28:CC) [09:33:37:779]: MainEngineThread is returning 1635
    MSI (s) (28:28) [09:33:37:888]: No System Restore sequence number for this installation.
    This patch package could not be opened.  Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
    MSI (s) (28:28) [09:33:37:888]: User policy value 'DisableRollback' is 0
    MSI (s) (28:28) [09:33:37:888]: Machine policy value 'DisableRollback' is 0
    MSI (s) (28:28) [09:33:37:888]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (28:28) [09:33:37:904]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (28:28) [09:33:37:919]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (28:28) [09:33:37:919]: Restoring environment variables
    MSI (c) (E0:88) [09:33:37:935]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (E0:88) [09:33:37:935]: MainEngineThread is returning 1635
    === Verbose logging stopped: 3-4-2009  9:33:37 ===

    This post should definitely help you
    http://blogs.msdn.com/sqlserverfaq/archive/2009/01/30/part-1-sql-server-2005-patch-fails-to-install-with-an-error-unable-to-install-windows-installer-msp-file.aspx?CommentPosted=true
    Feroz
    Mark as Answer if it helps. This posting is provided "AS IS" with no warranties and confers no rights.

  • Cluster Installation - SQL 2005 / 2003 - Creating cluster group

    Hi All,
    I am working on the cluster Installation in our environment and facing some issues at the time of installing first node MSCS  Installation. let me summarize the activities done so far
    Environment Details
    Physical Disk :
    G: (Physical Disk - SAN )
    I : (Physical Disk - SAN )
    C: Local disk
    Q: (Physical Disk Quorum - SAN )
    F: (Database and logs)
    -- > SCS installed locally in the server in G drive
    Virtual Hostname and IP : SeparateIP & cluster1
    Node 1: Hostname and separate IP
    Node 2 : hostname and Separate IP
    Installed MSCS service and tested the same - its working fine
    Installed SQL 2005 database in cluster mode and its working fine
    Started installing SAP
    Step 1: Installation of SCS instance in node A (Used F drive) - Successfull Installed
    Step 2: Installation of First node MSCS in node A
    Here I am facing an issue, in the end phase of the installation it will ask for creating cluster group -- > There I need to define the Global disk as F (Which is defined at the time of installing SCS instance) - But i dont see that disk is available in the drop down box .
    Is there any other workaround to bring the Global disk while creating the cluster group (First node MSCS installation)
    Looking forward for your suggestions
    Thanks and Regards
    Vijay

    Regret for the late update
    112266 solved my problem and In my case, I have bisected the disk as two but in the cluster environment that should not be the case. Ensure the the same in disk management
    Regards
    Vijay

  • SQL 2005 Setup on Win7 Ultimate [No SQL Services after installation]

    Win 7 Ultimate (64bit)
    4GB RAM
    New installation of Win 7 Ultimate
    Re-installation of SQL: Originally SQLExpress which didn't work out so I went to SQL2005 Standard Edition SP1 & updated to SQL2005 SP4.  I installed Visual Studio 2005 during the SP1 installation.  Actually, I installed all SQL2005 components
    'just in case'.
    I had attempted, unsuccessfully, to install SQLExpress so I uninstalled all SQLExpress components via Programs and Features, removed all SQL related directories and subdirectories in c:\Program Files (x86)\SQL.... and started the DVD setup.exe installation. 
    [I didn't do a RegEdit32!] 
    Uniquely, During installation of SQL2005, I wasn't asked for the SQL Product Key nor whether the mode was Windows or Mixed (I want Mixed Mode).  Now, after rebooting with all MS updates (Win7 and SQL2005) I don't see any SQL services even though the
    Microsoft SQL Server 2005, Backward compatibility and Books etc are listed as installed under Programs and Features.  IIRC, I saw a message regarding ASP.Net for 64bit being installed but some issues on the 32bit not being installed (warning message).
    So, how do I get the necessary SQL 2005 services installed and get SQL functional???  I'm open to a complete re-install if necessary.  My original DVD is SQL2005 Standard Edition SP1, fyi.
    THANKS!

    1) SQL Server Configuration Manager?  Yes, I do under "Configuration Tools"  When selecting this and going into SQL Server 2005 Services I get "There are no items to show in this view".
    2) Exact SQL Server edition? From Help of SQL Server Configuration Manager: 2005.090.5000.00
    3) Compact Edition installed?  I used the SQL2005 SP1 Standard Edition DVD and then selected setup.exe.  If you'd like for me to uninstall SQL and reinstall I will (including removing appropriate SQL Server directories).  I'd remove the RegEdit
    entries but I don't know where/what they are.  [[Note!: See #4 below where under Server Type I see "SQL Server Compact Edition  ... as well as Database Engine, Analysis Services, Reporting Services and Integration Services]
    4) ??: Since I can't get into SQL Server Management Studio.  I get "Cannot connect to XYZ02" "A network-related or instance specific error occurred while establishing a connection to SQL server.  The server was not found or was not accessible. 
    Verify that the instance name is correct and that SQL Server is configured to allow remote connections.  (Provider: Named Pipes Provider, error:40- Could not open a connection to SQL server) (Microsoft SQL server, Error:2)"  [Note: XYZ02 is the name
    of the laptop and I used: Server Type: Database Engine; Server Name: XYZ02 (I had to enter as it wasn't listed); Authentication: Windows Authentication
    So, suggestions... looks like I DO have Compact Edition?  Thoughts?????
    Thanks
    BTW, I have another 64bit laptop (same mfr/model but with 8GB vs this 4GB under 64bit Win7 Ultimate) that runs SQL fine.  Been running SQL 2005 on it for 3-4+ years.

  • SQL 2005 Upgrade complete! - Post installation tasks questions!

    Hi All
    I have managed to upgrade our DEV and TST ECC6 systems to SQL2005 (from SQL2000) and so far all seems ok however I have a a few questions and checks I would like some help with. I have included my post installation tasks at the bottom of this post, so you know what I have done.
    I have noticed that when I  run SGEN I get a short dump  LOAD_VERSION_LOST which I am not sure what this means.
    If there is anything else I need to do or should do please let me know.
    Thanks
    Phil
    <b>Post Installation Tasks</b>
    <u>SQL Queries</u>
    exec sp_configure 'show advanced options', 1
    reconfigure with override
    exec sp_configure 'max degree of parallelism', 1
    reconfigure with override
    exec sp_configure 'xp_cmdshell', 1
    reconfigure with override
    alter database <SID> set page_verify checksum
    go
    alter database <SID> set auto_create_statistics on
    go
    alter database <SID> set auto_update_statistics on
    go
    alter database <SID> set auto_update_statistics_async on
    go
    dbcc updateusage ('<SID>')
    go
    exec sp_updatestats
    go
    <u>SAP Tasks</u>
    Check SM21/SM50/DB02/ST04/ST22/SICK for any unusual error messages.

    Hello,
    I want run the below script on SQL 2005, can anyone tell me how I run it in SQL 2005?
    exec sp_configure 'xp_cmdshell', 1
    reconfigure with override
    I need to enable xp_cmdshell in sql 2005
    Reg,
    SAT

  • Installation failed SQL 2005

    Hi all ~ I have problem on installing SQL 2005: please have a look on the following log:
    === Verbose logging started: 2/23/2015  10:59:24  Build type: SHIP UNICODE 4.05.6002.00  Calling process: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe ===
    MSI (c) (FC:98) [10:59:24:019]: Resetting cached policy values
    MSI (c) (FC:98) [10:59:24:019]: Machine policy value 'Debug' is 0
    MSI (c) (FC:98) [10:59:24:019]: ******* RunEngine:
               ******* Product: {90A40409-6000-11D3-8CFE-0150048383C9}
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (FC:98) [10:59:24:020]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (FC:98) [10:59:24:020]: Grabbed execution mutex.
    MSI (c) (FC:98) [10:59:24:022]: Cloaking enabled.
    MSI (c) (FC:98) [10:59:24:022]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (FC:98) [10:59:24:022]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (EC:B8) [10:59:24:030]: Running installation inside multi-package transaction {90A40409-6000-11D3-8CFE-0150048383C9}
    MSI (s) (EC:B8) [10:59:24:030]: Grabbed execution mutex.
    MSI (s) (EC:5C) [10:59:24:032]: Resetting cached policy values
    MSI (s) (EC:5C) [10:59:24:032]: Machine policy value 'Debug' is 0
    MSI (s) (EC:5C) [10:59:24:032]: ******* RunEngine:
               ******* Product: {90A40409-6000-11D3-8CFE-0150048383C9}
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (EC:5C) [10:59:24:032]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (EC:5C) [10:59:24:038]: SRSetRestorePoint skipped for this transaction.
    MSI (s) (EC:5C) [10:59:24:039]: End dialog not enabled
    MSI (s) (EC:5C) [10:59:24:039]: Original package ==> C:\WINDOWS\Installer\180ca.msi
    MSI (s) (EC:5C) [10:59:24:039]: Package we're running from ==> C:\WINDOWS\Installer\180ca.msi
    MSI (s) (EC:5C) [10:59:24:043]: APPCOMPAT: looking for appcompat database entry with ProductCode '{90A40409-6000-11D3-8CFE-0150048383C9}'.
    MSI (s) (EC:5C) [10:59:24:043]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (EC:5C) [10:59:24:050]: MSCOREE already loaded, using loaded copy
    MSI (s) (EC:5C) [10:59:24:054]: Opening existing patch 'C:\WINDOWS\Installer\57492f7.msp'.
    MSI (s) (EC:5C) [10:59:24:054]: Note: 1: 2203 2: C:\WINDOWS\Installer\57492f7.msp 3: -2147287038
    MSI (s) (EC:5C) [10:59:24:054]: Couldn't find local patch 'C:\WINDOWS\Installer\57492f7.msp'. Looking for it at its source.
    MSI (s) (EC:5C) [10:59:24:054]: Resolving Patch source.
    MSI (s) (EC:5C) [10:59:24:054]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (EC:5C) [10:59:24:054]: User policy value 'DisableMedia' is 0
    MSI (s) (EC:5C) [10:59:24:054]: Machine policy value 'AllowLockdownMedia' is 0
    MSI (s) (EC:5C) [10:59:24:054]: SOURCEMGMT: Media enabled only if package is safe.
    MSI (s) (EC:5C) [10:59:24:054]: SOURCEMGMT: Looking for sourcelist for product {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}
    MSI (s) (EC:5C) [10:59:24:054]: SOURCEMGMT: Adding {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}; to potential sourcelist list (pcode;disk;relpath).
    MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Now checking product {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}
    MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Media is enabled for product.
    MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
    MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Processing net source list.
    MSI (s) (EC:5C) [10:59:24:055]: Note: 1: 1402 2: UNKNOWN\Net 3: 2
    MSI (s) (EC:5C) [10:59:24:055]: Note: 1: 1706 2: -2147483647 3: OWC11SP3.MSP
    MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Processing media source list.
    MSI (s) (EC:5C) [10:59:25:063]: SOURCEMGMT: Resolved source to: 'OWC11SP3.MSP'
    MSI (s) (EC:5C) [10:59:51:327]: Note: 1: 1314 2: OWC11SP3.MSP
    MSI (s) (EC:5C) [10:59:51:327]: Unable to create a temp copy of patch 'OWC11SP3.MSP'.
    MSI (s) (EC:5C) [10:59:51:327]: Searching provided command line patches for patch code {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}
    MSI (s) (EC:5C) [10:59:51:329]: Note: 1: 1708
    MSI (s) (EC:5C) [10:59:51:329]: Product: Microsoft Office 2003 Web Components -- Installation failed.
    MSI (s) (EC:5C) [10:59:51:330]: Windows Installer installed the product. Product Name: Microsoft Office 2003 Web Components. Product Version: 11.0.6558.0. Product Language: 1033. Installation success or error status: 1635.
    MSI (s) (EC:5C) [10:59:51:332]: MainEngineThread is returning 1635
    MSI (s) (EC:B8) [10:59:51:332]: No System Restore sequence number for this installation.
    This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.
    C:\WINDOWS\Installer\180ca.msi
    MSI (s) (EC:B8) [10:59:51:333]: User policy value 'DisableRollback' is 0
    MSI (s) (EC:B8) [10:59:51:333]: Machine policy value 'DisableRollback' is 0
    MSI (s) (EC:B8) [10:59:51:333]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (EC:B8) [10:59:51:334]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (EC:B8) [10:59:51:334]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (EC:B8) [10:59:51:335]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (EC:B8) [10:59:51:335]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (EC:B8) [10:59:51:335]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (EC:B8) [10:59:51:335]: Restoring environment variables
    MSI (c) (FC:98) [10:59:51:337]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (FC:98) [10:59:51:337]: MainEngineThread is returning 1635
    === Verbose logging stopped: 2/23/2015  10:59:51 ===
    Please help help

    this problem solved, i replace back the .msi to the windows\installer, now i have another probelm::
    === Verbose logging started: 2/23/2015  14:02:33  Build type: SHIP UNICODE 4.05.6002.00  Calling process: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe ===
    MSI (c) (44:50) [14:02:33:615]: Resetting cached policy values
    MSI (c) (44:50) [14:02:33:615]: Machine policy value 'Debug' is 0
    MSI (c) (44:50) [14:02:33:615]: ******* RunEngine:
               ******* Product: {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (44:50) [14:02:33:616]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (44:50) [14:02:33:616]: Grabbed execution mutex.
    MSI (c) (44:50) [14:02:33:618]: Cloaking enabled.
    MSI (c) (44:50) [14:02:33:618]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (44:50) [14:02:33:619]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (B8:9C) [14:02:33:626]: Running installation inside multi-package transaction {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
    MSI (s) (B8:9C) [14:02:33:626]: Grabbed execution mutex.
    MSI (s) (B8:64) [14:02:33:626]: Resetting cached policy values
    MSI (s) (B8:64) [14:02:33:626]: Machine policy value 'Debug' is 0
    MSI (s) (B8:64) [14:02:33:626]: ******* RunEngine:
               ******* Product: {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (B8:64) [14:02:33:626]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (B8:64) [14:02:33:632]: SRSetRestorePoint skipped for this transaction.
    MSI (s) (B8:64) [14:02:33:632]: End dialog not enabled
    MSI (s) (B8:64) [14:02:33:633]: Original package ==> C:\WINDOWS\Installer\23e28752.msi
    MSI (s) (B8:64) [14:02:33:633]: Package we're running from ==> C:\WINDOWS\Installer\23e28752.msi
    MSI (s) (B8:64) [14:02:33:637]: APPCOMPAT: looking for appcompat database entry with ProductCode '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'.
    MSI (s) (B8:64) [14:02:33:637]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (B8:64) [14:02:33:644]: MSCOREE already loaded, using loaded copy
    MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'DisablePatch' is 0
    MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'AllowLockdownPatch' is 0
    MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'DisableLUAPatching' is 0
    MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'DisableFlyWeightPatching' is 0
    MSI (s) (B8:64) [14:02:33:649]: APPCOMPAT: looking for appcompat database entry with ProductCode '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'.
    MSI (s) (B8:64) [14:02:33:649]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (B8:64) [14:02:33:649]: Transforms are not secure.
    MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0018_SV53749_MSXML6_1.log'.
    MSI (s) (B8:64) [14:02:33:650]: Command Line: STPSETUPTHREADID=1484 STPSETUPPROCESSID=9540 EXTERNALCONTROL=1 ADDLOCAL=ALL SKIPPENDINGREBOOTCHECK=1 APPGUID={FFFA78A7-BD51-4255-8470-C4D4A85B49F5} REBOOT=ReallySuppress CURRENTDIRECTORY=C:\Program Files\Microsoft
    SQL Server\90\Setup Bootstrap CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=9540
    MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{EE6525FC-1729-4E76-A8C1-12C756BA0AD0}'.
    MSI (s) (B8:64) [14:02:33:650]: Product Code passed to Engine.Initialize:           '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'
    MSI (s) (B8:64) [14:02:33:650]: Product Code from property table before transforms: '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'
    MSI (s) (B8:64) [14:02:33:650]: Product Code from property table after transforms:  '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'
    MSI (s) (B8:64) [14:02:33:650]: Product registered: entering maintenance mode
    MSI (s) (B8:64) [14:02:33:650]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is admin assigned: LocalSystem owns the publish key.
    MSI (s) (B8:64) [14:02:33:650]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is managed.
    MSI (s) (B8:64) [14:02:33:650]: MSI_LUA: Credential prompt not required, user is an admin
    MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
    MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
    MSI (s) (B8:64) [14:02:33:651]: Package name retrieved from configuration data: 'msxml6.msi'
    MSI (s) (B8:64) [14:02:33:651]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
    MSI (s) (B8:64) [14:02:33:654]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (s) (B8:64) [14:02:33:654]: Machine policy value 'DisableMsi' is 1
    MSI (s) (B8:64) [14:02:33:654]: Machine policy value 'AlwaysInstallElevated' is 0
    MSI (s) (B8:64) [14:02:33:654]: User policy value 'AlwaysInstallElevated' is 0
    MSI (s) (B8:64) [14:02:33:654]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is admin assigned: LocalSystem owns the publish key.
    MSI (s) (B8:64) [14:02:33:654]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is managed.
    MSI (s) (B8:64) [14:02:33:654]: Running product '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}' with elevated privileges: Product is assigned.
    MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding STPSETUPTHREADID property. Its value is '1484'.
    MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding STPSETUPPROCESSID property. Its value is '9540'.
    MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding EXTERNALCONTROL property. Its value is '1'.
    MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding ADDLOCAL property. Its value is 'ALL'.
    MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding SKIPPENDINGREBOOTCHECK property. Its value is '1'.
    MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding APPGUID property. Its value is '{FFFA78A7-BD51-4255-8470-C4D4A85B49F5}'.
    MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
    MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap'.
    MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
    MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
    MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '9540'.
    MSI (s) (B8:64) [14:02:33:655]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
    MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '2bacf19a1da7c4438b188852d7df058c'.
    MSI (s) (B8:64) [14:02:33:655]: RESTART MANAGER: Session opened.
    MSI (s) (B8:64) [14:02:33:655]: TRANSFORMS property is now:
    MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
    MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
    MSI (s) (B8:64) [14:02:33:658]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming
    MSI (s) (B8:64) [14:02:33:660]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Favorites
    MSI (s) (B8:64) [14:02:33:662]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (s) (B8:64) [14:02:33:663]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Documents
    MSI (s) (B8:64) [14:02:33:665]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (s) (B8:64) [14:02:33:667]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Recent
    MSI (s) (B8:64) [14:02:33:668]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (s) (B8:64) [14:02:33:671]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Templates
    MSI (s) (B8:64) [14:02:33:671]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (s) (B8:64) [14:02:33:673]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Local
    MSI (s) (B8:64) [14:02:33:675]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Pictures
    MSI (s) (B8:64) [14:02:33:679]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (s) (B8:64) [14:02:33:681]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (B8:64) [14:02:33:682]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (s) (B8:64) [14:02:33:685]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (s) (B8:64) [14:02:33:687]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (s) (B8:64) [14:02:33:691]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (s) (B8:64) [14:02:33:693]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (B8:64) [14:02:33:695]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (s) (B8:64) [14:02:33:697]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (s) (B8:64) [14:02:33:698]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Desktop
    MSI (s) (B8:64) [14:02:33:701]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
    MSI (s) (B8:64) [14:02:33:701]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
    MSI (s) (B8:64) [14:02:33:702]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
    MSI (s) (B8:64) [14:02:33:711]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
    MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
    MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
    MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Sun Life'.
    MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding COMPANYNAME property. Its value is 'Sun Life Hong Kong Limited'.
    MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding Installed property. Its value is '00:00:00'.
    MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\WINDOWS\Installer\23e28752.msi'.
    MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'C:\WINDOWS\Installer\23e28752.msi'.
    MSI (s) (B8:64) [14:02:33:711]: Machine policy value 'MsiDisableEmbeddedUI' is 0
    MSI (s) (B8:64) [14:02:33:711]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
    MSI (s) (B8:64) [14:02:33:711]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
    MSI (s) (B8:64) [14:02:33:712]: Note: 1: 2205 2:  3: PatchPackage
    MSI (s) (B8:64) [14:02:33:712]: Machine policy value 'DisableRollback' is 0
    MSI (s) (B8:64) [14:02:33:712]: User policy value 'DisableRollback' is 0
    MSI (s) (B8:64) [14:02:33:712]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
    === Logging started: 2/23/2015  14:02:33 ===
    MSI (s) (B8:64) [14:02:33:713]: PROPERTY CHANGE: Adding Preselected property. Its value is '1'.
    MSI (s) (B8:64) [14:02:33:713]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
    MSI (s) (B8:64) [14:02:33:713]: Doing action: INSTALL
    Action start 14:02:33: INSTALL.
    MSI (s) (B8:64) [14:02:33:717]: Running ExecuteSequence
    MSI (s) (B8:64) [14:02:33:717]: Doing action: SkipInstallCA
    MSI (s) (B8:64) [14:02:33:720]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SkipInstallCA'
    MSI (s) (B8:B8) [14:02:33:730]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI92BC.tmp, Entrypoint: SkipInstall
    MSI (s) (B8:B0) [14:02:33:730]: Generating random cookie.
    MSI (s) (B8:B0) [14:02:33:743]: Created Custom Action Server with PID 8820 (0x2274).
    MSI (s) (B8:20) [14:02:33:788]: Running as a service.
    MSI (s) (B8:20) [14:02:33:791]: Hello, I'm your 32bit Impersonated custom action server.
    Action start 14:02:33: SkipInstallCA.
    This package is not supported on this operating system.
    Action ended 14:02:33: SkipInstallCA. Return value 3.
    Action ended 14:02:33: INSTALL. Return value 3.
    Property(S): ProductCode = {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
    Property(S): Manufacturer = Microsoft Corporation
    Property(S): ProductVersion = 6.20.2016.0
    Property(S): ProductLanguage = 1033
    Property(S): UpgradeCode = {1B117BA7-5BC1-419E-820E-7D4F3F412C7B}
    Property(S): ARPPRODUCTICON = ARPIco
    Property(S): PIDTemplate = 53934<````=````=````=````=`````>@@@@@
    Property(S): PROMPTROLLBACKCOST = P
    Property(S): DiskPrompt = [1]
    Property(S): INSTALLLEVEL = 100
    Property(S): ALLUSERS = 1
    Property(S): InstallMode = Typical
    Property(S): ErrorIcon = ErrorIco
    Property(S): SuccessIcon = SuccessIco
    Property(S): WarningIcon = WarningIco
    Property(S): LicenseIcon = LicenseIco
    Property(S): SetupIcon = SetupIco
    Property(S): CompleteIcon = CompleteIco
    Property(S): CustomIcon = CustomIco
    Property(S): RepairIcon = RepairIco
    Property(S): RemoveIcon = RemoveIco
    Property(S): ModifyIcon = ModifyIco
    Property(S): NewIcon = NewIco
    Property(S): UpIcon = UpIco
    Property(S): DialogBanner = BannerBmp
    Property(S): WelcomeBmp = WelcomeBmp
    Property(S): ApplicationUsers = AllUsers
    Property(S): Details = 0
    Property(S): AgreeToLicense = No
    Property(S): _IsMaintenance = Reinstall
    Property(S): _IsMaintenance2 = Modify
    Property(S): ReinstallModeText = omus
    Property(S): Display_IsBitmapDlg = 1
    Property(S): Interrupted = 0
    Property(S): ProductID = none
    Property(S): ISENABLEDWUSFINISHDIALOG = 1
    Property(S): SQLServerText1 = 0
    Property(S): SQLServerVersionText1 = 0
    Property(S): SQLServerVersionText2 = 0
    Property(S): SQLServerVersionText3 = 0
    Property(S): CA_ERRORCOUNT = 0
    Property(S): CA_WARNINGCOUNT = 0
    Property(S): CA_SUCCESSCOUNT = 0
    Property(S): MINIMUMOS = true
    Property(S): UI_SHOWCOPYRIGHT = yes
    Property(S): ShowUserRegistrationDlg = 1
    Property(S): ErrorDialog = ErrorDlg
    Property(S): DefaultUIFont = Tahoma8
    Property(S): VersionNT = 600
    Property(S): ARPHELPLINK = http://support.microsoft.com/kb/2758696
    Property(S): SecureCustomProperties = NEWERFOUND.72DE5BCD_5CB0_4335_B118_AB4C4DA70AE1;OLDERFOUND.72DE5BCD_5CB0_4335_B118_AB4C4DA70AE1;OLDERFOUND2.72DE5BCD_5CB0_4335_B118_AB4C4DA70AE1
    Property(S): DesktopFolder = C:\Users\Public\Desktop\
    Property(S): ProgramFilesFolder = C:\Program Files\
    Property(S): ButtonTextStyle = {\ButtonTextStyle}
    Property(S): DlgTextStyle = {\DlgTextStyle}
    Property(S): DlgTextStyleB = {\DlgTextStyleB}
    Property(S): DlgTitleStyle = {\DlgTitleStyle}
    Property(S): DlgTitleStyleB = {\DlgTitleStyleB}
    Property(S): FixedStyle = {\FixedStyle}
    Property(S): Installed = 00:00:00
    Property(S): COMPANYNAME = Sun Life Hong Kong Limited
    Property(S): USERNAME = Sun Life
    Property(S): DialogTitleSetup = Setup
    Property(S): DialogTitlePatch = Patch
    Property(S): DialogTitleUpgrade = Upgrade
    Property(S): Text_ArrowLeft = <
    Property(S): Text_ArrowRight =  >
    Property(S): ButtonText_Next = Next
    Property(S): ButtonText_Next_Hot = &Next
    Property(S): ButtonText_Cancel = Cancel
    Property(S): ButtonText_Cancel_Hot = &Cancel
    Property(S): ButtonText_Back = Back
    Property(S): ButtonText_Back_Hot = &Back
    Property(S): ButtonText_Finish = Finish
    Property(S): ButtonText_Finish_Hot = &Finish
    Property(S): ButtonText_Update = Update >
    Property(S): ButtonText_Update_Hot = &Update >
    Property(S): ButtonText_Ok = OK
    Property(S): ButtonText_Ok_Hot = &OK
    Property(S): ButtonText_Yes = Yes
    Property(S): ButtonText_Yes_Hot = &Yes
    Property(S): ButtonText_No = No
    Property(S): ButtonText_No_Hot = &No
    Property(S): ButtonText_Abort = Abort
    Property(S): ButtonText_Abort_Hot = &Abort
    Property(S): ButtonText_Ignore = Ignore
    Property(S): ButtonText_Ignore_Hot = &Ignore
    Property(S): ButtonText_Retry = Retry
    Property(S): ButtonText_Retry_Hot = &Retry
    Property(S): ButtonText_Change = Change...
    Property(S): ButtonText_Change_Hot = &Change...
    Property(S): ButtonText_Help = Help
    Property(S): ButtonText_Help_Hot = &Help
    Property(S): ButtonText_Install = Install
    Property(S): ButtonText_Install_Hot = &Install
    Property(S): ButtonText_Exit = Exit
    Property(S): ButtonText_Exit_Hot = &Exit
    Property(S): ButtonText_Remove = Remove
    Property(S): ButtonText_Remove_Hot = &Remove
    Property(S): ButtonText_Space = Space
    Property(S): ButtonText_Space_Hot = &Space
    Property(S): ButtonText_Browse = Browse...
    Property(S): ButtonText_Browse_Hot = Bro&wse...
    Property(S): ButtonText_DiskCost = Disk Cost...
    Property(S): ButtonText_DiskCost_Hot = &Disk Cost...
    Property(S): LabelText_Status = Status
    Property(S): LabelText_SerialNumber = &Serial Number:
    Property(S): LabelText_UserName = &User Name
    Property(S): LabelText_PersonName = Name
    Property(S): LabelText_PersonOrganization = Company
    Property(S): LabelText_InstallTo = Install to
    Property(S): LabelText_Modify = &Modify
    Property(S): LabelText_Repair = Re&pair
    Property(S): LabelText_Remove = &Remove
    Property(S): LabelText_Complete = &Complete
    Property(S): LabelText_Custom = Cu&stom
    Property(S): LabelText_NetworkLocation = &Network location:
    Property(S): LabelText_LookIn = &Look in
    Property(S): LabelText_FolderName = &Folder name
    Property(S): LabelText_FeatureDescription = Feature description
    Property(S): LabelText_CopyFilesFrom = Copy Files from
    Property(S): LabelText_InstallFor = Install this application for
    Property(S): HeadText_AdminWelcome = Welcome to the Install Wizard for
    Property(S): HeadText_InstallWelcome = Welcome to the Install Wizard for
    Property(S): HeadText_WelcomePatch = Welcome to the Patch for
    Property(S): HeadText_SetupWelcome = Welcome to the
    Property(S): HeadText_SetupWelcome2 =  Setup
    Property(S): HeadText_ResumeInstall = Resuming the Install Wizard for
    Property(S): HeadText_SetupInterrupted =  Setup Interrupted
    Property(S): HeadText_LicenseAgreement = License Agreement
    Property(S): HeadText_FeatureSelection = Feature Selection
    Property(S): HeadText_NetworkLocation = Network Location
    Property(S): HeadText_ProgramMaintenance = Program Maintenance
    Property(S): HeadText_DiskSpaceRequirements = Disk Space Requirements
    Property(S): HeadText_FilesInUse = Files in Use
    Property(S): HeadText_DatabaseFolder = Database Folder
    Property(S): HeadText_RegistrationInformation = Registration Information
    Property(S): HeadText_CompletingSetup = Completing the
    Property(S): HeadText_CompletingSetup2 =  Setup
    Property(S): HeadText_InstallingProduct = Installing
    Property(S): HeadText_UninstallProduct = Uninstalling
    Property(S): HeadText_ChangeDestinationFolder = Change Current Destination Folder
    Property(S): HeadText_ReadyInstall = Ready to Install the Program
    Property(S): HeadText_ReadyRepair = Ready to Repair the Program
    Property(S): HeadText_ReadyModify = Ready to Modify the Program
    Property(S): HeadText_RemoveProgram = Remove the Program
    Property(S): HeadText_OutOfDiskSpace = Out of Disk Space
    Property(S): DescText_FilesInUse = Some files that need to be updated are currently in use.
    Property(S): DescText_RegistrationInformation = The following information will personalize your installation.
    Property(S): DescText_ServerImage = Setup will create a server image of
    Property(S): DescText_ServerImage2 =  at a specified network location. To continue, click Next.
    Property(S): DescText_InstallModifyRemove = Setup helps you install, modify or remove
    Property(S): DescText_InstallModifyRemove2 = . To continue, click Next.
    Property(S): DescText_PatchInstall = The Install Wizard will install the Patch for
    Property(S): DescText_PatchInstall2 =  on your computer. To continue, click Update.
    Property(S): DescText_WizardComplete = The Install Wizard will complete the installation of
    Property(S): DescText_WizardComplete2 =  on your computer. To continue, click Next.
    Property(S): DescText_CompleteSuspended = The Install Wizard will complete the suspended installation of
    Property(S): DescText_CompleteSuspended2 =  on your computer. To continue, click Next.
    Property(S): DescText_SuccessfulInstallation = Setup has installed
    Property(S): DescText_SuccessfulInstallation2 =  successfully. Click Finish to exit.
    Property(S): DescText_SuccessfulRemove = Setup has removed
    Property(S): DescText_SuccessfulRemove2 =  successfully. Click Finish to exit.
    Property(S): DescText_SuccessfulRepair = Setup has repaired
    Property(S): DescText_SuccessfulRepair2 =  successfully. Click Finish to exit.
    Property(S): DescText_SuccessfulModify = Setup has modified
    Property(S): DescText_SuccessfulModify2 =  successfully. Click Finish to exit.
    Property(S): DescText_SetupInterrupted = Setup was interrupted before
    Property(S): DescText_SetupInterrupted2 =  could be completely installed.
    Property(S): DescText_PreparingSetup =  Setup is preparing the Install Wizard which will guide you through the program setup process. Please wait.
    Property(S): DescText_FeatureSelection = Select the program features you want installed.
    Property(S): DescText_ProgramFeaturesInstall = The program features you selected are being installed.
    Property(S): DescText_ProgramFeaturesUninstall = The program features you selected are being uninstalled.
    Property(S): DescText_ReadLicense = Please read the following license agreement carefully.
    Property(S): DescText_SpecifyNetworkLocation = Specify a network location for the server image of the product.
    Property(S): DescText_BrowseDestination = Browse to the destination folder.
    Property(S): DescText_ModifyRepairRemove = Repair or remove the program.
    Property(S): DescText_ReadyInstallation = Setup is ready to begin installation.
    Property(S): DescText_ChosenRemove = You have chosen to remove the program from your system.
    Property(S): DescText_DiskSpaceRequirements = The disk space required for the installation of the selected features.
    Property(S): DescText_DiskExceedsAvailable = Disk space required for the installation exceeds available disk space.
    Property(S): Text_ReRunSetup = Your system has not been modified. To complete installation at another time, please run setup again.
    Property(S): Text_FinishExit = Click Finish to exit Setup.
    Property(S): Text_RestoreState = You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation.
    Property(S): Text_RestoreClick = Click Restore or Continue Later to exit Setup.
    Property(S): Text_InstallWait = Please wait while the Install Wizard installs
    Property(S): Text_InstallWait2 = . This may take several minutes.
    Property(S): Text_UninstallWaitText = Please wait while the Install Wizard uninstalls
    Property(S): Text_UninstallWaitText2 = . This may take several minutes.
    Property(S): Text_UninstallWait = Please wait while the Install Wizard uninstalls
    Property(S): Text_UninstallWait2 = . This may take several minutes.
    Property(S): Text_ProgressDone = Progress done
    Property(S): Text_Copyright = WARNING: This program is protected by copyright law and international treaties.
    Property(S): Text_BeginInstallation = Click Install to begin the installation.
    Property(S): Text_ReviewChange = If you want to review or change any of your installation settings, click Back. Click Cancel to exit Setup.
    Property(S): Text_AlterFeatureInstall = Click an icon in the following list to change how a feature is installed.
    Property(S): Text_ConfirmExit = The installation is not yet complete. Are you sure you want to exit?
    Property(S): Text_FeatureSelectionDescription = This feature requires 4 MB on your hard drive.
    Property(S): Text_EnterNetworkLocation = Enter the network location or click Change to browse to a location. Click Install to create a server image of
    Property(S): Text_EnterNetworkLocation2 =  at the specified network location or click Cancel to exit Setup.
    Property(S): Text_SelectDifferentDrive = The highlighted volumes do not have enough disk space available for the currently selected features. You can remove files from the highlighted volumes, choose to install less features onto local drives, or select different
    destination drives.
    Property(S): Text_RepairInstallationErrors = Repair installation errors in the program. This option fixes missing or corrupt files, shortcuts, and registry entries.
    Property(S): Text_RemoveFromComputer = Remove
    Property(S): Text_RemoveFromComputer2 =  from your computer.
    Property(S): Text_UsingFilesRetry = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
    Property(S): Text_ClickRemove = Click Remove to remove
    Property(S): Text_ClickRemove2 =  from your computer. After removal, this program will no longer be available for use.
    Property(S): Text_ReviewChangeBack = If you want to review or change any settings, click Back.
    Property(S): Text_AllUsers = &Anyone who uses this computer (all users)
    Property(S): Text_OnlyMe = Only for &me ([USERNAME])
    Property(S): Text_NotAcceptTerms = I &do not accept the terms in the license agreement
    Property(S): Text_AcceptTerms = I &accept the terms in the license agreement
    Property(S): Text_RegInfoNameAndOrg = Enter your name and the name of your organization in the fields below.
    Property(S): Text_RegInfoOrg = Enter the name of your organization in the field below.
    Property(S): Upgrade_Confirmation = A lower version of this product has been detected on your system. Would you like to upgrade your existing installation?
    Property(S): AdminMessage = Setup requires user to be in the administrator group in order to continue the installation process. Setup is aborting as the current user is not in the administrator group.
    Property(S): SupportedOSMessage = Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation.
    Property(S): ShortCutText = MSXML 6 Service Pack 2 (KB2758696)
    Property(S): DialogTitle = MSXML 6 Service Pack 2 (KB2758696) Setup
    Property(S): ProductName = MSXML 6 Service Pack 2 (KB2758696)
    Property(S): ShortName = MSXML 6 Service Pack 2 (KB2758696)
    Property(S): WrongPackage = This MSXML6 Service Pack 2 (KB2758696) package is not supported on the current processor type.
    Property(S): DialogPatchTitle = MSXML 6 Service Pack 2 (KB2758696) Patch
    Property(S): SystemFolder = C:\Windows\system32\
    Property(S): WdSfpCaMainModId.41646F16_4E6C_4E96_BF1B_772105414B9D = 86F857F6_A743_463D_B2FE_98CB5F727E09
    Property(S): AppGuidRegKey = Wdsfpca_Uninstall_RegKey.86F857F6_A743_463D_B2FE_98CB5F727E09
    Property(S): MsiLogFileLocation = C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0018_SV53749_MSXML6_1.log
    Property(S): PackageCode = {EE6525FC-1729-4E76-A8C1-12C756BA0AD0}
    Property(S): ProductState = 5
    Property(S): ProductToBeRegistered = 1
    Property(S): STPSETUPTHREADID = 1484
    Property(S): STPSETUPPROCESSID = 9540
    Property(S): EXTERNALCONTROL = 1
    Property(S): ADDLOCAL = ALL
    Property(S): SKIPPENDINGREBOOTCHECK = 1
    Property(S): APPGUID = {FFFA78A7-BD51-4255-8470-C4D4A85B49F5}
    Property(S): REBOOT = ReallySuppress
    Property(S): CURRENTDIRECTORY = C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap
    Property(S): CLIENTUILEVEL = 3
    Property(S): MSICLIENTUSESEXTERNALUI = 1
    Property(S): CLIENTPROCESSID = 9540
    Property(S): MsiRestartManagerSessionKey = 2bacf19a1da7c4438b188852d7df058c
    Property(S): PRODUCTLANGUAGE = 1033
    Property(S): VersionDatabase = 300
    Property(S): VersionMsi = 4.05
    Property(S): WindowsBuild = 6002
    Property(S): ServicePackLevel = 2
    Property(S): ServicePackLevelMinor = 0
    Property(S): MsiNTProductType = 3
    Property(S): WindowsFolder = C:\Windows\
    Property(S): WindowsVolume = C:\
    Property(S): System16Folder = C:\Windows\system\
    Property(S): RemoteAdminTS = 1
    Property(S): TempFolder = C:\Users\ADMINI~1\AppData\Local\Temp\
    Property(S): CommonFilesFolder = C:\Program Files\Common Files\
    Property(S): AppDataFolder = C:\Users\Administrator\AppData\Roaming\
    Property(S): FavoritesFolder = C:\Users\Administrator\Favorites\
    Property(S): NetHoodFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
    Property(S): PersonalFolder = C:\Users\Administrator\Documents\
    Property(S): PrintHoodFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
    Property(S): RecentFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Recent\
    Property(S): SendToFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\SendTo\
    Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
    Property(S): CommonAppDataFolder = C:\ProgramData\
    Property(S): LocalAppDataFolder = C:\Users\Administrator\AppData\Local\
    Property(S): MyPicturesFolder = C:\Users\Administrator\Pictures\
    Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
    Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
    Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
    Property(S): FontsFolder = C:\Windows\Fonts\
    Property(S): GPTSupport = 1
    Property(S): OLEAdvtSupport = 1
    Property(S): ShellAdvtSupport = 1
    Property(S): Intel = 6
    Property(S): PhysicalMemory = 2047
    Property(S): VirtualMemory = 2390
    Property(S): AdminUser = 1
    Property(S): LogonUser = Administrator
    Property(S): UserSID = S-1-5-21-752955860-2970973076-2057269693-500
    Property(S): UserLanguageID = 1033
    Property(S): ComputerName = SV53749
    Property(S): SystemLanguageID = 1033
    Property(S): ScreenX = 1024
    Property(S): ScreenY = 768
    Property(S): CaptionHeight = 19
    Property(S): BorderTop = 1
    Property(S): BorderSide = 1
    Property(S): TextHeight = 16
    Property(S): TextInternalLeading = 3
    Property(S): ColorBits = 32
    Property(S): TTCSupport = 1
    Property(S): Time = 14:02:33
    Property(S): Date = 2/23/2015
    Property(S): MsiNetAssemblySupport = 2.0.50727.4016
    Property(S): MsiWin32AssemblySupport = 6.0.6001.18000
    Property(S): RedirectedDllSupport = 2
    Property(S): MsiRunningElevated = 1
    Property(S): Privileged = 1
    Property(S): DATABASE = C:\WINDOWS\Installer\23e28752.msi
    Property(S): OriginalDatabase = C:\WINDOWS\Installer\23e28752.msi
    Property(S): UILevel = 2
    Property(S): Preselected = 1
    Property(S): ACTION = INSTALL
    MSI (s) (B8:64) [14:02:33:948]: Note: 1: 1729
    MSI (s) (B8:64) [14:02:33:948]: Product: MSXML 6 Service Pack 2 (KB2758696) -- Configuration failed.
    MSI (s) (B8:64) [14:02:33:949]: Windows Installer reconfigured the product. Product Name: MSXML 6 Service Pack 2 (KB2758696). Product Version: 6.20.2016.0. Product Language: 1033. Reconfiguration success or error status: 1603.
    MSI (s) (B8:64) [14:02:33:951]: Deferring clean up of packages/files, if any exist
    MSI (s) (B8:64) [14:02:33:951]: MainEngineThread is returning 1603
    MSI (s) (B8:9C) [14:02:33:952]: RESTART MANAGER: Session closed.
    MSI (s) (B8:9C) [14:02:33:952]: No System Restore sequence number for this installation.
    === Logging stopped: 2/23/2015  14:02:33 ===
    MSI (s) (B8:9C) [14:02:33:952]: User policy value 'DisableRollback' is 0
    MSI (s) (B8:9C) [14:02:33:952]: Machine policy value 'DisableRollback' is 0
    MSI (s) (B8:9C) [14:02:33:952]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (B8:9C) [14:02:33:953]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (B8:9C) [14:02:33:953]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (B8:9C) [14:02:33:954]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (B8:9C) [14:02:33:954]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (B8:9C) [14:02:33:954]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (B8:9C) [14:02:33:954]: Restoring environment variables
    MSI (s) (B8:9C) [14:02:33:955]: Destroying RemoteAPI object.
    MSI (s) (B8:B0) [14:02:33:955]: Custom Action Manager thread ending.
    MSI (c) (44:50) [14:02:33:957]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (44:50) [14:02:33:959]: MainEngineThread is returning 1603
    === Verbose logging stopped: 2/23/2015  14:02:33 ===
    MSXML6 problem

  • HA Installation of ERP 6 With SQL 2005 Server Problem.

    hi ,
    i have two blade server with windows 2003 Enterprise and  cluster configure on them as prescribe by the note of Microsoft.
    now i have installed MS Sql 2005 Server as said by the SAP Documentation on first node and it was sucessfull . after that i installed ABAP (ASCS) SCS on first node and it was installed too . now i am stuck at the process of FIRST MSCS NODE step
    the installation note says :-
    7.4.5Configuring the First MSCS Node
    To configure the first MSCS node so that it functions properly in MSCS, you have to run the cluster configuration option offered by the SAPinst tool. When you run this option it:
    Creates the SAP cluster group
    Copies tools to the SAPCluster directory
    Sets the SAPService to manual
    Makes sure that the SAPOsCol service starts from the SAPCluster directory
    this says cluster configuration option but i can't find it any where and i don't know how the %windows%/sapcluster dir  creates do i have to create it manually if so then how, the sap document says as follows :-
    SapCluster Directory
    In an SAP cluster installation, an additional directory u2013 %WINDIR%\SapCluster u2013 is created under the system directory.
    This contains all the SAP files required by all MSCS cluster nodes, independently of the MSCS node the SAP instance is running on. The files are database tools and program files (executables) used by the operating system monitor (SAPOsCol).
    The directory is added to the path variable of the user <sapsid>adm.
    can any one help me in this .
    thanks in advanced

    thanks for response , at the phase FIRST MSCS NODE it stuck
    the R3CLUS.LOG file is as follows :-
    24.8.2010, 13:14:26, ntclsapclus.cpp, 213, Entry: InstallSAPResourceType
    24.8.2010, 13:14:26, ntclsclinst.cpp, 58, Entry: Sclinstsrct::Create
    24.8.2010, 13:14:26, ntclsclinst.cpp, 79, CreateClusterResourceType RC= 183
         Cannot create a file when that file already exists.
    24.8.2010, 13:14:26, ntclsclinst.cpp, 91, DllRegisterCluAdminExtension RC= 0
    24.8.2010, 13:14:26, ntclsclinst.cpp, 102, DllRegisterServer RC= 0
    24.8.2010, 13:14:26, ntclsclinst.cpp, 116, Exit: Sclinstsrct::Create RC= 0
    24.8.2010, 13:14:26, ntclsapclus.cpp, 215, Exit: InstallSAPResourceType RC= 0
    and SAPINST.LOG file say's in last lines:-
    INFO 2010-08-24 13:15:26.655
    Execute step dGetSAPClusterParameters of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0
    WARNING[E] 2010-08-24 13:15:26.670
    MUT-03028  Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
    ERROR 2010-08-24 13:15:26.824
    FCO-00011  The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
    and SAPINST_DEV.LOG say's in last lines :-
    WARNING[E] 2010-08-24 13:15:26.670
               CJSlibModule::writeError_impl()
    MUT-03028  Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
    TRACE      2010-08-24 13:15:26.793 [iaxxejsbas.hpp:483]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    ERROR      2010-08-24 13:15:26.824 [sixxcstepexecute.cpp:950]
    FCO-00011  The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
    TRACE      2010-08-24 13:15:26.840 [iaxxgenimp.cpp:752]
                CGuiEngineImp::showMessageBox
    <html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > MS SQL Server > High-Availability System > First MSCS Node. You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/HA/MSCS-A.
    TRACE      2010-08-24 13:15:26.840 [iaxxgenimp.cpp:1255]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    help needed........
    Edited by: Eric Brunelle  to fix HTML tags on Aug 24, 2010 9:15 AM

  • SQL 2005 x64 poor performance after migration from SQL 2005 x86

    Recently We've migrated SQL 2005 x86 SP1 Enterprise running on Windows 2003 Enterprise to new hardware where is running Windows 2008 SP2 and SQL 2005 x64 SP4 with CU3.
    In the work day, there are sometime SQL excpetions like this below. On other hand i can also tell that we already found some queries which has some inner joins and where clauses on nvarchar fileds, because of the nature of application. Such a query
    is running for about 11 seconds on old SQL server, and about 6 minutes on new SQL server. My main question if is this possible just with a change to new architecture of SQL and more last patches and updates for SQL 2005. Is there any way how to get
    this queries running faster, without rewritng them with new ones? Is this also possible this could be also cause for SQL exceptions, which we are facing on SQL server?
    About new hardware, for now we can't find it something wrong. There is basic configuration:
    Cisco UCS  C220 M3S (1U server)
    32GB RAM
    Intel(R)Xeon® CPU [email protected], 6 core
    Disk system: 4xSAS 300GB in RAID5 (OS and DATA) and 2xSATA 1TB in RAID1 (SQL backup)
    RAID controller: LSI MegaRAID SAS 9271-8i (with latest driver and firmware)
    Part of log of dump file:
    2014-05-09 08:30:07.08 spid86      Error: 17311, Severity: 16, State: 1.
    2014-05-09 08:30:07.08 spid86      SQL Server is terminating because of fatal exception c0000264. This error may be caused by an unhandled Win32 or C++ exception, or by an access violation encountered during exception handling.
    Check the SQL error log for any related stack dumps or messages. This exception forces SQL Server to shutdown. To recover from this error, restart the server (unless SQLAgent is configured to auto restart).
    2014-05-09 08:30:07.08 spid86      Using 'dbghelp.dll' version '4.0.5'
    2014-05-09 08:30:07.08 spid86      **Dump thread - spid = 86, PSS = 0x0000000132A67ED0, EC = 0x0000000132A67EE0
    2014-05-09 08:30:07.08 spid86      ***Stack Dump being sent to D:\MSSQL.1\MSSQL\LOG\SQLDump0087.txt
    2014-05-09 08:30:07.08 spid86      * *******************************************************************************
    2014-05-09 08:30:07.08 spid86      *
    Thanks for any help,
    Matjaž

    >Is there any way how to get this queries running faster, without rewriting them with new ones?
    You need to perform basic performance tuning steps in the new environment.
    Software optimization:
    http://www.sqlusa.com/articles/query-optimization/
    Disk optimization:
    http://www.sqlusa.com/bestpractices/configureharddisk/
    Memory optimization:
    http://www.sqlusa.com/bestpractices/memory-configuration/
    REBUILD INDEXES, eliminate missing indexes & UPDATE STATISTICS.
    If there is still a problem, look in Activity Monitor for expensive queries. Optimize them. As a general rule, you don't want to have expensive queries in RDBMS.
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • VC Installation with IIS 6.0 and MS SQL 2005 on MSServer2003

    Dear all,
    Is it possible, if we plan to install VC6.0 with IIS6.0 and MS SQL 2005 on MS Server 2003?
    Now I have installation guide for install VC6.0 but it 's recommend to use MS SQL 2000 [Now MS SQL 2000 is very old and my company plan to use 2005]
    Another question is If I want to change or install VC7.0, pls guide me the path and the name of VC7.0 in Service Marketplace that I have to download it. When I seach in service marketplace, I found the result as below. Which file that I have to download it, if I want to install VC7.0
    000001   VISUAL COMPOSER BASE 7.01   
      Installation Software Component (Current View)
    000002   VISUAL COMPOSER BASE 7.11   
      Installation Software Component (Current View)
    000003   VISUAL COMPOSER BI KITS 7.01   
      Installation Software Component (Current View)
    000004   VISUAL COMPOSER BI KITS 7.11   
      Installation Software Component (Current View)
    000005   VISUAL COMPOSER FLEX   
      Installation Software Component (Current View)
    000006   VISUAL COMPOSER FLEX 7.01   
      Installation Software Component (Current View)
    000007   VISUAL COMPOSER FRAMEWORK 7.01   
      Installation Software Component (Current View)
    000008   VISUAL COMPOSER FRAMEWORK 7.11   
      Installation Software Component (Current View)
    000009   VISUAL COMPOSER GP KITS   
      Installation Software Component (Current View)
    000010   VISUAL COMPOSER GP KITS 7.01   
      Installation Software Component (Current View
    Regards,
    Pannee

    Hi,
    Am not sure this would answer your question or not, but this is for your info:
    Visual Composer is now built in or provided as default component in EP7.0 SPS12 onwards.
    If you have the portal installation then you can access this by http://hostname:5xx00/VC.
    Regards,
    Vamshi.

  • B1i (2005) installation failedSo far:  windows XP, MS-SQL 2005 express: ok

    Dear All,
    I try to install B1i for NW 2005 on a SBO 2005B installation. I have installed all prerequisites like JDK, MSXML, Tomcat (no blanks in path). When running the setup program and after all information gathered, the connection to the MS-SQL 2005 database succeeds and the final installation step starts but returns the message:
    "Initail database failed, make sure Tomcat or mini-http is shut down and please check your database's status and try again"
    Looking into MS-SQL shows a database beeing created named localhost/B1i. Tomcat and mini-http are definately shut down. When starting Tomcat, it is accessible via http://localhost:8080.
    System Parameters:
    windows server 2003
    SBO 2005B
    java: 1.4.2.19
    tomcat 5.5.27 including compat package for 1.4.2.19)
    sql jdbc 1.2.2828.100
    msxml 4.0 SP 2
    I can not find an error in the system. Is there a way to diagnose what is happening and does anyone have an idea where the problem lies?
    Ciao, Mathias
    [Update]
    I have tried JDBC 2.0.1008 and JDBC 2.0.1607 - both lead to a fatal error when trying to connect to the database. I assume this is due to Java JDK 1.4.2 as JDBC requires Java 5.0 (1.5.0)
    Does anybody know if I can use JDK 1.5.0_17 instead of 1.4.2_19?
    [Update 2]
    I have tried to install the B1i on two other servers with identical setup and it worked. However, this will not help me with this machine... On the other side, it shows, that there is nothing wrong with the procedure I am using
    I found by the way: B1i works fine with MSSQL 2005 Express, it works with jdk 1.5.0.17 (and then JDBC 2.0)
    [Update 3]
    So far:
    windows XP, MS-SQL 2005 express: ok
    windows XP, MS-SQL 2005 express, SBO2005A: ok
    windows 2003, MS-SQL 2005 SBO2005A: fail
    windows 2003, MS-SQL 2005 SBO2005B: fail
    windows 2003, MS-SQL 2005 SBO2007A: ok
    windows 2003, MS-SQL 2005 Netweaver 2004S: fail
    Unfortunately the three servers where it fails are the ones I need to use for production
    The precise error state is that the install routine creates the database in SQL 2005 and then reports that it can not create the database. Is there something I should check in SQL 2005?
    Edited by: Mathias Wilhelm on Feb 11, 2009 5:17 PM

    Salut Eddy,
    I tried it with tomcat 5.0.30 - no success. JDK is 1.4.2.19
    I tried it with tomcat 5.5.27 - no success. JDK was 1.4.2.19 and 1.5.17
    I checked the database: The structure is created but the tables are not created. As the user 'sa' has full admin rights it must be with the access path to the database that is wrong. What I do not understand is, why the installation routine is able to connect to the database to create B1i and then unable to create the tables. I checked in the log files of the db and found no error messages. I tested this as well by using a wrong password for sa or a wrong user. In both cases, the installation routine fails already when checing the existence of B1i database
    [Update]
    In the meantime:
    Checked permissions on database
    Checked that administrator is member of local admin group
    Checked JAVA_HOME environment variable
    Found collation SQL_Latin1_General_CP1_CI_AS for working setup and SQL_Latin1_General_CP1_CS_AS in failing setup
    Checked all security settings by comparing to working setup
    Checked event viewer and found no errors
    Checked all log files and found no errors
    Checked that sa can create tables manually in localhost\B1i
    Ciao, Mathias
    Edited by: Mathias Wilhelm on Feb 12, 2009 2:36 PM

Maybe you are looking for

  • Connecting to Airport via usb modem

    I've been told that I need a usb to ethernet converter to connect my modem to my airport express station. Has anyone else had this problem, recomend the right piece of kit or modem?

  • Save as .avi file settings for television movie

    Can anyone tell me what settings should be used to save a .avi file so that it will open correctly in a program such as Pinnacle Studio? We want to make this into a DVD and it keeps getting distorted no matter what we try. Thank you

  • Trying to (micro) update cs5 but won't let me.

    Hi, i've recently had to erase my hard drives and for some reason my Time Machine backup disk is unreadable for instant backup. not the end of the world since i have my data still, but i'm now installing everything (production premium bundle cs5) fro

  • SRM_EXTRACTED_CTLG catalog

    Hi friends When I run report BBP_CCM_TRANSFER_CATALOG Iu2019ve got a system massage u201Ccatalog transfer endedu201D and green error u201CProblem class important # 83u201D Nevertheless there is no catalog named u201CSRM_EXTRACTED_CTLGu201D in the sys

  • Unable to the cache refresh for the AF

    Hi Guys, I am unable to do the full cache refresh for the "AF" in the administration tab under caches overview. I tried with PISUPER and also PIAFUSER. It says not authorized. any help would be really appreciated Thanks, srini