BADI -- HRHAP00_DOC_DEF_D1 -- Default Appraiser

Have implemented the BADI HRHAP00_DOC_DEF_D1 and in the code kept the break-point.
In Attributes tab, App.Enhn. "Default manager" is set.
Config: In the appraisal template, processing tab, in further template behaviour, default manager is also set.
When I run the transaction "APPCREATE" or "PHAP_CREATE_PA" it is NOT stopping at the break-point. Is there anything which i am missing to activate the BADI?

Hi Satish,
Have you kept the HTML Break Point, For BSPs only HTML break points will work.
Regards
Anil.C
Reward the points if my answer helps you out.

Similar Messages

Performance Management - Default Appraiser

Hi!,
 I have this new requirement to set default appraiser for a document which will replace existing Manager PERNR. This should happen while Mass document creation process. I tried using BADI HRHAP00_DOC_DEF_D1 but it does not hit
while document creation. Can any one suggest Appropriate BADI and steps involved to accomplish this task?
Thanks,
G.

Hi,
The BADI HRHAP00_DOC_DEF_D1 is used for picking manager of the logged in person.
The foll fn module is used in the badi ..
READ MYSELF (with default object type)
CALL FUNCTION 'HRHAP_C_DEFAULT_OBJECT_MYSELFT'
 EXPORTING
 plan_version = plan_version
 FROM_DATE = SY-DATUM
 TO_DATE = SY-DATUM
 IMPORTING
 t_myself = lt_myself.
So if u use it for Mass upload, it will fetch the manger of the person who execute it.
We have faced the same issue and we have created a filter to fetch the given employees manager.You have to modify the BADI.
Rgds,
Jothi.
Mark useful answrs.

BAdIs for HR Appraisal Document Additional Header Data

We use trx PHAP_PREPARE to create Appraisal doucments Using Organization Units. I have the following requirement,
1. add new selection parameters on the screen (Personnel Area, Additional Appraiser),
2. create document based on the Personnel Area entered,
3. populated the Additional Appraiser as the Further Participant on the Header Data Section.
My questions are which BAdIs I can use to fulfill my requirement and how can I do it??
Q1. Can I use BAdi HRHAP00_ADD_HEADER to capture and pass the additonal data to the documents.
Q2. Can I use BAdI HRHAP00_DOC_DEF_DO Default Further Participants to populate the data on the screen.
Q3. How about BAdi Free Enhancement, what can I use it for and how can I use it?
Does anybody has good link or detail documentation of how to implement the Appraisal BAdIs?
Any help is greatly appreciated.

Sept 12. A day later
I haven't get any reply yet. Someone out there must have done something similar.
Kindly give me some suggestion where should I start looking.
According to the HCM book, I can use "Prepare Appraisal Docs with Restricted Templates" to prepare appraisals based on more than just organization unit.
The program is using LDB PCH, unlike PNP which can select different report category to default selection screen parameters.
I can add personnel area on it, but I don't how to ask the program to get objec with this personnel area.
Can someone give a SAP program that uses LDB PCH with additional selection options?
Many thanks in advance.

In ME21N,User Exit/BADI for Defaulting Vendor number at item level.

Hi Experts.
In ME21N, for every purchase order, we have condtion tab for each line item.
Many condition typesot taxes are listed based on the config for the materials.
My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
I need a user exit/BADI for defaulting the Vendor number.
Regards
Balaji R

Hi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu

Account Creation - Badi for Default values for BP Role and Sales Area

Hi all,
my requirement regards the possibility to create a new prospect (a link should be available in the navigation bar or create section).
Logically, a bp role as "Prospect" and particoular sales area should be created automatically.
I created an implementation for the BADI definition "BADI_CRM_BP_UIU_DEFAULTS". But don't know how to create the default values for BP role and Sales area:
In my code
assign cr_me->('VIEW') to <lv_view_name>.
if sy-subrc ne 0.
exit.
endif.
lv_viewname = <lv_view_name>.
case lv_viewname.
when 'AccountDetails.htm'.
I obtain the viewname "AccountDetails" , the related context "Header". After I don't know how to proceed to obtain the related entities through the relationship BuilRolesRel and BuilSalesArrangementRel.
Am I following the right way? Is there another solution to prepare the output for default values?
Any kind of suggestion will be appreciated.
Regards, Roberto

go to spro>cross-application components>sap busines partner>business partner> basic settings>field groupings>Configure Field Attributes per BP Role
Double click the business role which you want to customaze (e.g. 'A') and change the proper settings.
Regards.

BADI for changing Appraisal document application name for Web dynpro ABAP

Hi,
For Appraisal document customizing through PHAP_CATALOG_PA, We have BADI HRHAP00_BSP_TMPL to change the BSP application name which can be used in Web layout for output display. Using this we can change application name from HAP_DOCUMENT to custom BSP application name
Similarly, what is the BADI for changing Web dynpro ABAP applictaion name? Currently its triggering HAP_MAIN_DOCUMENT.
how do we change application name to some custom web dynpro application name
Regards,
Kothand

Hi Karim,
I don't know, if there is any chance to get the Webdynpro application name. At least in the ABAP System fields is no information about the webdynpro application name.
One remark: I have allways problems with BAPIS / BADIS that behave different depending on the caller. Could it be a good idea to pass some information through the interface / parameters?
Best regards
Renald

BADI for defaulting the ITEM data

Hi,
I have to default a field in Item level for shopping cart but the default value should be editable to the user. I tried using the BADI BBP_DOC_CHANGE_BADI but does not helps because it is gets triggered when even any item is changed.
The requirement is when the item is created for the first time the the BADI should be triggered.
Regards,
Prabhu

The answer is simple
while creating ship to address . copy as default
or you can take this address into shipt to attributes addr_shipt = 12233 12333 is an address number
so it will inherit all the users.
br
muthu

How to Default Appraisal Template in MSS Performance Management

Dear Friends
How can we default a certain Appraisal Template in MSS Performance Management Status Overview. We currently have
Appriasal Templatate I ( Used in 2008)
Appriasal Templatate II ( Used in 2009)
Appriasal Templatate III ( Used in 2010)
In the drodpwn in MSS, it is showing us in the Ascending Order. Default one is always the first one (Appraisla Template I). Since it is year 2010, we want to default it to Appriasal Template III OR is there a way to sort them?
Appreciate your help.
Sujatha

Good Day.
In standard, there is no any possibility to default an specif value for the template there. The values for the template are sorted in alphabetical order by default and the first value with be displayed there.
Thanks & Best Regards

Configure HRHAP00_GET_LIST_FLT BADI implementation in appraisal template using OOHAP_BASIC T-code

Hi Experts,
I want to modify List of Incomplete Appraisal Documents in appraisal template, for which I have found a BADI HRHAP00_GET_LIST_FLT (Displayed in further Badis section of RHHAP_BADI_OVERVIEW program).
I have created implementation of this BADI but I am unable to see BADI in OOHAP_BASIC transaction (I have checked all the enhancement areas).
Please let me know how can I configure the implementation of BADI HRHAP00_GET_LIST_FLT in OOHAP_BASIC T-code.
(I have also checked that BADI implementation was not getting triggered by simply activating the implementation)
Thanks in advance
Ninad shevade

Hi Tarun,
I am facing the same problem can you please help me on the same.
I want to filter the appraisal templates how i can do?
Rajneesh

Reflection of a customised BAdi in the appraisal Template

Hi All..
I have created a Customised BAdi from an existing BAdi..i have also included this BAdi in Enhancement Area using the transaction oohap_basic.But when i go back to appraisal template and try to insert this BAdi in a column it diesnt reflect their..so please can anybody help me out with a solution

Hi Andy,
Thanks for the reply. I have managed to recall what I have done long before and here are further details.
Go to the transaction PHAP_CATALOG
Select the drop-down menu "Go-To"
Choose Enhancements
HRHAP00_ENHANCE_DEL1 - Delete Element Only 'In Planning'
HRHAP00_ENHANCE_DEL2 - Delete Element Only 'In Planning' or 'In Review'
HRHAP00_ENHANCE_DEL3 - Delete Element 'In Planning', 'In Review', 'In Process'
Best
Veera.

Own BAdI in new Appraisal model

Dear experts,
I am trying to create a new BAdI to cover an evaluation requirement within the appraisal forms of SAP HCM. We are currently on release ERP 2004 (ECC 5.0) and are using the new functionality of the appraisals here.
In the "old" system I could create a function and assign it to the forms very easily. Here I only found the way to create the BAdI but no way to use it in my appraisal form. The option Further is inactive.
Can anyone help me where I need to tell SAP that I can use the new BAdI?
Thanks in advance
Michael

Hello Michael,
Which BAdI definition you have used for your implementation?
In general there are 3 steps before you can use your implementation in your template:
1. Create the implementation
2. register the implementation via oohap_basic
3. make it available in the catalog, on category level.
Now you will be able to use it. Depending on the exit area used it will be or selectable in a dropdown (for example with free or fix enhancements) or selectable on the further processing options.
This is also described in more detail in the documentation of the component. Further more you can find a document containing all the relevant information about the available BAdI definitions within OSA.
Regards and Groetjes,
Maurice

BAdi's in Appraisal documnet

Hi,
I am trying to implement the BAdi HRHAP00_ADD_HEADER in the BSP application HAP_DOCUMENT.
These are the steps that I followed.
I copied the definition to my z definition which also include the class.
I created my own implementation with a reference to the above definition and finally activated the same.
However at runtime My Z badi is not being picked up.
Am I missing something? Do I have to maintain some thing else?
Please revert back
Thanks,
Devendra

inorder to do the 3rd step,
1)delete any documents which are created under that template through phap_admin_pa tcode.
2)goto phap_catalog_pa,unrelease the document
3) gointo the template in the "LAYOUT" tab you have a field named "additional header data" give your enhancement name there
4)save it and release the template, then create a new document with that template and then you should be able to debug the badi too.
it should work now, if not try
3))goto tcode phap_catalog_pa, goto your template and under the "PROCESSING" tab, you see "further template behavior" button double click on that and make an entry of your badi there.
Message was edited by: manasa
Message was edited by: manasa

How to add column access BADI to appraisal template.

I am not able to see option to add column access BADI in template at Processing tab--> Further template behaviour.
Kinldy let me know how to add it.
I am able to see only following options
BC         Business Check
D1         Default Appraiser
D2         Default Appraisee
DE         Default Execution Period
DN         Default Appraisal Document Name
DP         Default Part Appraiser
DR         Default Review Date
DV         Default Validity Period
HA         Header Data Change
PM         Maximum Number of Part Appraisers
Thanks in advance.
Dhananjy

Hello Ravikiran,
Based on the Role and Status of the appraisal form, turn the Column On/Off/Hide..
sample code...
case s_header_status-ap_status.
          when c_status_in_preparation.
            availability = 'H'.
            column_owner   = space.
          when c_status_in_planning.
            case s_body_columns-column_id.
              when 'OBJ0'.
                availability   = 'X'.
                column_owner   = 'X'.
                exit.
              when 'Z003'.
                availability   = 'X'.
                column_owner   = 'X'.
Hope it helps...
Regards,
Jothi.P

Activating a BAdi for Appraisal

Hi,
I am new to working with SAP's new appraisal model. I need some help as to implementing some BAdi to enhance the layout of the appraisal form. There is 2 parts to my problem.
1. The comment field of the appraisaler is a bit short. I want to enhance it using the badi to extend the length of the field.
2. How to select the implemented badi in the appraisal catalog screen.
If can provide me with a step by step example from creating the Badi to implementing it in Appraial catalog, it will be a great help to me.
Points will be awarded...
Thanks in advance.
Lawrence

Hi,
Have a look BADI HRHAP00_ACC_HEADER .
Implementing Business Add-Ins (BADI)
The use of object orientated code within SAP has lead to new method of enhancing standard SAP code called
Business Add-Ins or BADI's for short. Although the implementation concept is based on classes, methods and
inheritance you do not really have to understand this fully to implement a BADI. Simply think of methods
as a function module with the same import and export parameters and follow the simple instructions below.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. HRHAP00_ACC_HEADER and press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as ZHRHAP00_ACC_HEADER
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. HRHAP00_ACC_HEADER) and double click on the method name
8. When changes have been made activate the implementation
OSA
See below link for more info:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Step by step proc
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
Regards
Kiran Sure

Performance Managment Appraisal Document - BADi- HRHAP00_DOC_BC

Hi,
I have requirement that for the appraisal Document notes section in Performance mangemet,
I need to provide the functionalities of Character count and Chacter restriction.
For this After my investigation I found I need to implement the BAdi HRHAP00_DOC_BC ( Business Check BADi).
Can any one provide me some sample code How I can implement My requirement.
Thanks

Hi Samriddhi,
The Badi "HRHAP00_DOC_BC" is a business check badi used to check the appraisal data in the appraisal document against the business check defined by the customer.
How to use: Create the Filter value in the OOHAP_BASIC tcode and add the Badi to the appraisal template under further template behaviour. This should make the appraisal docuemnt respond to the badi call.
Implementation expamle: This Badi has the method to check the data in the appraisal docuemnt against customer specific check points. Say if the custome wants the minimum rating per employee to be 1. Or Promotion as YES/eligible for employee rated at 5.
This check can be done here and an appropriate error can be raisedthrough the "return" (BAPI_RETURN ?) parameter of the method.
I dont have a SAP system with me right now. But this should be easiliy implementable by an ABAPer.
Hope this delayed response hepls you.
Regards,
Subbu

BADI -- HRHAP00_DOC_DEF_D1 -- Default Appraiser

Similar Messages

Maybe you are looking for