Balance sheet is empty

Hi experts,
I entered all of the initial value of G/L accounts and BP. but when I checked them in financical report --> balance sheet, I found all of them are zero.
In financial->chart of accounts, I sure there exists initial value in each account. why can not i read them in balance sheet?
Thanks...

yes, it's a new database. no any transaction except opening balance. I use copy express and duplicate it from a test database I created last year.
in tribal balance, it can show all of BP's initial value if i ticket BP option.
but if only ticket G/L accounts, an error message appears: "No accounts found (Message 604-16)"
Thanks...
PS, In my old test database, balance sheet can shows all testing value I input by opening balances.

Similar Messages

Cost center empty in general ledger view for balance sheet accounts

Hi !
We are implementing ECC6 with new GL functionalities. We activated differents scenarii: cost center, profit center and segment.
Using FB03 (display document) we noticed that in the entry view, everything is fine: cost center, profit center and segment are filled successfully.
However, in the New GL view, the cost center is not filled for balance sheet accounts.
Any solution?
Regards,
Julien

HI,
Cost center will never be filled for the Balance Sheet account. For Balance sheet account Profit Center is required to be filled.
Don't be afraid this is the fundamental practice across the globe. Cost centers will be filled in only Expense account.
Exception to above rule is Asset master will recieve cost center because this will help in determining asset per department.
Regards,
Chintan Joshi.

Caary forward of balance sheet accounts

Hello,
I do have a problem with the carrying forward of balance sheet accounts. I would like to write the closing balance of the accounts of the previous month to the opening balance of the following month. It is for operative planning. I have created following business rule within the Finance application of BPC for the account technical equipment:
Account                    Account Detail      Account   Account Detail   Reverse   Data       Same    YTD
                                 (Closing Bal.)                       (Opening Bal.)    Sign    Src. Type Period
11101020_TEEQMAOW ACLO      11101020_TEEQMAOW AOPE          False     ALL     False    False
I have also created an account transformation rule with analogue specification.
I have referenced both of them in the default.lgf:
*SysLib Stored_Procedure_wrapper.lgl
RunCopyOpening(FINANCE,%RptCurrency_Set%,%Category_Set%)
*Commit
*SysLib Stored_Procedure_wrapper.lgl
RunCalcAccount(FINANCE,%Category_Set%,%RptCurrency_Set%)
*Commit
I have also tried the RunCalcAccount formula with fixed values instead of variable ones.
Before and after I send data with EVDRE, I ran the data manager default package, it runs OK, but it doesn't seem to make any calculations.
Is there any SQL logic or do I have to run the data manger differently? I already have tried some other logic from the user guide and the help, but it didn't work.
Can anybody help me, I'm happy to provide more information.
Thanks in advance!
Christopher

>
Tim Klem wrote:
> Hi Christopher.
>
> The SPCopyOpening works in a very specific manner -- it only copies the closing balance of the prior year's closing period (December, for example -- assuming the fiscal year matches the calendar year) into opening balance of the current period (the period for which you execute the logic).
>
> It doesn't support the ability to copy the prior month's closing period into the current period (e.g., May close into June open).
>
> In other words, SPCopyOpening is really designed to only support a YTD data structure -- YTD P&L values, and a YTD cash flow statement, for instance.
>
> If you have periodic movements, and want to copy May close into June open, you'll need to use the SPRunCalcAccount business rule. This allows you to set a relative period offset (-1), and has a few different options, and a separate business rule table setup, compared to the SPCopyOpening.
>
> Just to test if your SPCopyOpening setup is correct, you might try to load a few numbers into the prior year's December. But if the YTD data structure won't work for you, I wouldn't even waste the time -- focus on the SPRunCalcAccount syntax, and the corresponding "account transformation" business rule table.
>
> Regards,
>
> Tim
Thank you very much Tim!
I know have tried to compose a SPRunCalcAccount Logic , as well as two SQL logics. Sadly, none of them works.
SPRunCalcAccount Logic:
*RUN_STORED_PROCEDURE=SPRUNCALCACCOUNT([Finance], [CPlan1])
I have filled out the Business Rule table for the account transformation with the following information:
11101020_TEEQMAOW    ACLO 11101020_TEEQMAOW AOPE   False     -1     False   0
Is it OK to fill in -1 for Period and to leave the data source empty?
I have written the logic in the default.lgf to test it, but nothing happened? Do I have to include a Time member?
The two script logics are as follows:
*CALC_EACH_PERIOD
*WHEN ACCOUNT
*IS AOPE, MOVEMENTS
*REC(ACCOUNT=ACLO)
*REC(ACCOUNT=AOPE,TIME=NEXT)
*ENDWHEN
AOPE stands for the Opening Balance within the Account subtable Acctdetail. ACLO stands for the Closing Balance.
*WHEN ACCOUNT.FINSTMT
*IS BS
*REC(FACTOR=GET(ACCTDETAIL=ACLO, TIME=PRIOR), ACCTDETAIL=AOPE)
*ENDWHEN
BS stands for Balance Sheet within the Account Property FINSTMT (Financial Statement).
Hope this is enough information for you. I thank you very much in advance!
Christopher

Balance Sheet Accounts in PCA

Hi,
If I only activated PCA to capture the balance sheet accounts (Profit & Loss will be done strictly in COPA), can I left the field PC assigment in Cost Center Master Data to be empty?
Because the structure of the CC is in departement view, while the structure of PC is based on Product Hierarchy.
And I need to create the Balance Sheet Report based on the product hierarchy as in PC hierarchy.
Could any body advice me regarding the mater, like what is the implication if I left the PC assignment blank in CC master data.
Any help would be appreciated..
Thanks
Lea

If you do not assign any profit center to a cost center, anyhow the system would assign them to a default Dummy Profit Center which makes it more difficult to reconcile Cost Center Accounting and Financial Accounting. It is therefore recommended that you assign a profit center to each Cost center.
The following are some more analysis based on SAP documentation on concept and PCA assignments with reference to your dilemma of how to assign profit center to cost center which has been designed based on different characteristics namely product hierarchy versus function.
You have divided your company into profit centers according to product hierarchy.
This makes it difficult to assign cost centers that are divided by functions, to a profit center, which is divided by another attribute. i.e. product hierarchy. This can be apparent in a case, where, a production cost center may be performing activities relating to products which fall under multiple profit centers.
In these cases, you may want to assign these cost centers to one profit center (for example, "Production A"). If the cost center then performs activities for a production order, the system however credits the profit center "Production A" as well as the cost center at the time of settlement. You can then either settle the over-/under absorption from the cost center (for example, to a profitability segment) or allocate it directly to the corresponding product hierarchy in Profit Center Accounting.
It is often not possible to assign administration cost centers directly to a profit center. In this scenario, you can create profit center named service profit center or allocation profit center.. Then you may assign the admin cost center to the service profit center or allocation profit center. This profit center would then contain all the administrative costs which occur. At the end of the period, you can then either settle this over-/under absorption from the cost center (for example, to a profitability segment), with assignment to a service profit center.
To simplify you can ideally assess or distribute it directly in Profit Center Accounting, with the allocation profit center as the sender. In either case, the corresponding profit center is credited at the end of the period.

Aging Report does not match Balance Sheet Receivables/Payables Account

Hi experts,
I am requesting your help to find out why our customer receivables/vendor payables aging reports total does not match our balance sheet accounts receivable/ accounts payable account for the same period.
I would expect
Customer Receivables Aging Report Total = Balance Sheet Accounts Receivables Account
Vendor Aging Report Total = Balance Sheet Accounts Payables Account
Thank you.
Jane

When you run the report with an ending/aging date in the past (like the end of last month), if you do not display BP's with zero balances, it will leave out BP's who have a zero balance AT THE TIME YOU RUN THE REPORT. Some of them may have had a non-zero balance at the end of the month, but they will be left off anyway. So if a customer owed money on the last day of the month and he paid it on the first of the next month, his balance will not be shown on the report if you run it even one day later.
I feel this is a design defect in the report, but it is the system behavior.
Marcia

Vendor wise drill down in Trial Balance or Balance sheet report

Dear Experts,
Is there any report for Trial Balance or P&L/ Balance Sheet report where vendor wise drill down of amounts is possible?
Please suggest.
Regards
Komal

Hi Dear ,
You can use F.08 for Trail Balance and Vendor details - S_ALR_87012082 - Vendor Balances in Local Currency
You can get cumulative balance for the vendor.
Regards
Radha

Currency Valuation G/L Account Balance Sheet Posting F.05

Hi all,
Is there a way to post the Currency Valuation F.05 for G/L account balance sheet posting to another account than itself.
I cannot find any configuration on that, and a trace look to show that it goes back to SKA1,
SKAT & SKB1.
Open item have configuration in OBA1 and we can fix the posting where we want.
But the currency valuation for the account balance always happen to the same account.
Thank you,
Carole

Bal.sheet adj.1 in OBA1 is for that only. The GL account is for Identifying that this is FC account in case of Valuation Loss/ Gain.
Incase of realized loss or gain, it is the same GL account that has to hit in the local currency.

Balance sheet required for current quarter and previous quarter

Hi Guys,
I am using 0FIGL_C10 cube for balance sheet report,i need to create balances for current quarter and previous quarter.
user will enter the fisper, based on fisper it has to show the current quarter and previous quarter balance.
how to calculate the quarter using fisper.

you can use offset with ranges.
or
just offset of -1 , -2 & -3 seperately in 3 selections and add it in one column in formula (this will give u current quarter).
similarly offset of -4, -5 , -6 will give u previous quarter result.
total of 6 selection and 2 formulas. hide all selections from display.

Closing balances for Balance sheet

Hi,
We have started enteries a our customer from 01/04/2011 with the opening balance. after audit there balance sheet is finalise in month of september ie current month.
can anyone let me know how to enter the adjustment balances if there is any diffrence in the account balances.

Hi......
You can manage this difference in stock through stock reconciliation.......
Go to Inventory> Inventory Transaction> Inventory Opening Balances, Inventory Tracking, and Inventory Posting--> Inventory Tracking Tab and put the counted stock (Actual stock).
Then go to Inventory> Inventory Transaction> Inventory Opening Balances, Inventory Tracking, and Inventory Posting-->Inventory Posting. Enter the difference........
Regards,
Rahul

GL Balance sheet accts extracts using GLT0 table

Hi Experts
Please advise me as I need some help urgently
My client wants to extract all the closing balances from GL Balance sheets accts to their third party tool for reconciliation, we are using Version 4.7
Balances in all the currencies (Transaction, Local and Group currency)
I looked at the table GLT0: Am not able get the correct period number its obly displays period 16, and also the cumulative balance
e.g. Previous months closing balance is this months opening balance right am not getting any previous months movements
and if I clear any open items of previous months invoice its reflecting in the current period but remains same as previous period,
please advise on which table to look at
the bottom line is all GL balance for (Trail balance) extracts, I have to give instructions to the ABAPER for the extracts
please explain in details which table to look at and also the fields,
thanks
Kumar

Krishna
Many thanks for your reply, can you please clarify me in details please
in table GLT0 all the periods are independent and the previous months balance is not rooling out to this month so please clarify me the logic so that makes my life very easy, thank you
regards
Kumar

Balance Sheet translation at spot rate at ANY point in time

My client produces its financial accounts in AUD. They will have open items in AR, AP and Bank in foreign currencies. WITHOUT running periodic valuation they wish to produce a Balance Sheet at any point in time during the month applying the applicable daily spot rate to valuate the Foreign Currency open items (for reporting purposes only). I have run S_ALR_87012284 and maintained the special evaluations tab for Display Currency (AUD), Key date for translation (current date) and exchange rate type (spot rate type). However, this does not appear to be revaluating the open items in the subledger accounts to produce the balance sheet at the current spot rate. Appreciate input / alternate approach. Cheers, Dean.

Hi Chirag
As per Oracle following are the rules that has to be followed for translation.
1. For Balance Sheet Accounts (Asset & Liabilities) GL as a default uses the YTD rule.
2. For P&L Accounts you can choose between YTD and PTD rule. So in your case you can use the default PTD Rule. (Profile Option 'GL Translation: Revenue/Expense Translation Rule')
YTD Rule = (Translated Period Amount = Period-End Rate x YTD Ledger Currency Balance - Beginning Translated Balance).
PTD Rule = (Translated Period Amount = Period Average Rate x PTD Ledger Currency Balance)
Hope this helps.
Regards,
Gautam
Edited by: Gahlout on Sep 25, 2012 11:04 PM

How to revalue Vendor balance Amount in FC on a balance sheet date

Hi,
Can somebody help me for, How to revalue Vendor balance Amount in FC on a balance sheet date and to make respective posting to supplier and exchange rate differnces account..
thanks

Hi,
Vendor currency USD and local currency INR
thanks

How to report on balance sheet accounts using 0EC_PCA_3

Hi Experts,
How to report on balance sheet accounts using 0EC_PCA_3
Thanks
nagini

Hi,
IF you want to see the accumulated balances you need to select the period from 0 to 12.
EX: you want to open the report up to period 6th 2009 and want see the figures including the carryforward balances from 2008.
then in selection screen select the from period = 0 and to period =6.
hope its helpful
thanks,

G/L Account Line Items/ Profit Centers/ FBL3N/ F.5D/1KEK/KE5Z/Balance Sheet

Hi Experts,
Am running FBL3N-G/L Line Item Display, and am trying to get PROFIT CENTERS for Balanace sheet type of accounts, but Its not showing up.
But, am getting for Profit Loss accounts.
1) Why its so?
2) Then How to get the PROFIT CENTERS for them? (I know they r available, in BSEG)
3) Functional owner said(tele talk, no voice clear!!!) that, the Profit Centers are NOT get updated UNTIL month end, unless run the F.5D, 1KEK, KE5Z tx.s., which inturn system copies the profit centers(I dont know that, From where it copies) and posts/updates(I dont know, Wht get updated?), so, he said, relying on ??(is it BSEG??????) is not works out!!
So, let me know that,
Wht does its mean? Wht NOt get updated until month end?unless run the F.5D, 1KEK, KE5Z tx.s? Is it DataBase? BSEG?
4) Is BSEG table get updated, as soon as any FICO document ceated by user? I mean, Can I relay on BSEG always, for pulling the profit centers data for Balance sheet accounts, all the time?
5) If NOT, them Where Can I find them?
thanq
Edited by: Srinivas on Apr 7, 2008 3:42 PM

no repy

CO account assignment on a GR/IR Account (Balance sheet Account)

The GR/IR account line item on Goods Receipt(GR) documents picks up the account assignment ( WBS Element, Cost center or an Order) from the Purchase order account assignment.
The GR/IR account is defined as a Balance sheet account. So it is abnormal to pick up a CO account assignment on the GR/IR account line item on a Goods receipt or Invoice document.
I shall appreciate if some expert here lets me know if there is a fix(an OSS note) in order for the GR/IR account NOT to pick up a CO account assignment on the subsequent documents(Goods receipt and Invoice) from the Purchase order.
Thanks in advance.
Vijayanth

Hi Vijaynath,
If you have the modules like CO, PS, FM, IM and activated the above modules, at the time of the GR system compulsarly will ask for account assignment. Because PO might be crated for a project or cost center. In the above 2 cases system will look for account assignment.
I guess system picksup the cost center or WBS against the Raw Material account but not for the GR/IR clearing account. Please check it.
For the raw material and asset accounts you can create statistical cost elements.
Thanks & Regards,
shashi kanth.

Balance sheet is empty

Similar Messages

Maybe you are looking for