Balancing volume/gain across clips - anything like iTunes Sound Check

I am now in charge of a pretty large pile of pre-cut FCP clips captured in less than ideal circumstances, but with reasonably clear narrated voice overs. There are hundreds of short similar clips, but the volume varies tremendously, and I am trying to assemble them into longer sequences.
So - since they are all speech at a similar volume, is there any batch operation I can run on my clips to raise or lower the gain on each one to the same final level? I am looking for something similar to iTunes' sound check.

You could TRY (try) the normalize feature by sending it to Soundtrack after you edit.
Might work ok for you.
CaptM

Similar Messages

  • Is iTunes "Sound Check" better than five years ago?

    I got into iTunes (briefly) about five years ago.  I got all excited about mixed playlists and what-all ... but I burned out quickly because the Sound Check feature that would regulate the volumes from different CDs was mostly worthless.  Most songs averaged out, but that one track in ten would still sneak in there, too loud or too soft, and ruin the listening vibe in the house.
    I ditched iTunes and went back to my CD player.
    Now I'd like to get back into iTunes again and I'm wondering if Sound Check ever had any significant improvements in the last five years?  Did Apple finally perfect it?
    Do we finally have mix playlists that play consistently, like one properly re-mastered compilation CD?  Or are occasional tracks still showing up too loud or too soft?
    -John

    John_Neumann wrote:
    Thanks for the replies, Wolf and Sanjampet.
    Yep, both of you are spot on correct about some of the dynamics that affect Sound Check.  The only thing I know is that, five years ago, I didn't like it.  I also remember not really being able to make manual adjustments work for me because I have music playing constantly and jumping up and running over to the Mac while an offending song is on my mind got mighty inconvenient.  That's why I stuck with my CD player. ...
    I think you answered my question for me.  No, Sound Check is no different than it was five years ago. 
    Not quite what I said.  I certainly expect it has improved over 5 years, I can only tell you it will never be perfect.  And that is relevant because of your expectations.
    The fact is, CD players do not have SoundCheck at all.  But when your CD mismatches song volumes, that does not "offend your ears".  And yet, oddly, iTunes does.  Listening sequentially to a CD you already know, you are accustomed to those particular mismatches, so they "sound right" to you.  What I'm speaking of here is cognitive bias, which is human and normal, and the thing to do is simply be aware it's there.
    I too have tried playlists and was not impressed.  I remember when the level adjustment (in Song Properties) came out and thought "about time".  And I've never spent the time to actually try playlists again.  But I did not abandon iTunes entirely simply because one of its features "is not for me", i.e. sucked.  Digital playback is still the Best Jukebox Ever, with instant and searchable access to my music.  CDs are in every way inferior.* 
    It sounds like you jumped into digital playback with both feet, found some of its features were not ready for prime time, and jumped back out.  I would suggest easing back in with one foot, remembering that setup is a one-time task and it's pure profit from there. 
    * purposefully ignoring the question of musical fidelity, some believe compression is bad, others believe digital is bad.  Not this thread.

  • IPod/iTunes Sound Check Sync

    Half the music on my iPod comes from my own computer that originally had Sound Check enabled in my iTunes. But the other half of my iPod music comes from my friends' computers, and I know that not every one of them used Sound Check. So the obvious problem is that the volume levels for the music on my iPod are not all normalized. I know that you can't directly Sound Check songs on the iPod, and that it only happens in iTunes. I also know that the solution is for me to import the iPod music into iTunes (with iPodRip), thus Sound Checking anything that wasn't originally normalized, and then updating it back to my iPod. But I don't want to import my entire iPod library if I don't have to.
    So my question is this: Is there any was to know which of the music on my iPod was originally encoded with Sound Check? I only want to fix what needs fixing.
    Thanks.

    I can't remember the exact phrase as I'm not near a Mac with any sound checked files on it... It is at the bottom of the left column when it's present.
    <TABLE CELLPADDING=0 CELLSPACING=0 WIDTH=100%><TR><TD>It was a joke about life...  
    Dave</TD><TD ALIGN="RIGHT">U</TD></TR></TABLE>

  • Reinstalled iTunes - "Sound Check" option no longer effective

    I've always used and liked the "Sound Check" option in iTunes. Recently, due to 13-year-old hijinx, my library became corrupt. I uninstalled iTunes, downloaded the most recent version, and reinstalled it. I assumed the "Sound Check" option defaulted to "off", so I proceeded to add all my music folders to create a new library in the newly installed iTunes. Then I realized the "Sound Check" option was actually turned on - why I don't know, since I hadn't switched it on. I had assumed after the "add music folders" process I would turn on "Sound Check" and iTunes would read the music files to obtain the volume (usually a several hour process with my 6000+ songs). But it never did read the files. And now, even though "Sound Check" is on, it doesn't seem to me that the songs play at the same level. I've tried switching "Sound Check" off and then turning it on again to no avail. Is there a way to manually force iTunes to re-listen to the music files to re-set the levels for "Sound Check"? -Murray

    hmmmmm. this is going to be experimental. (because i've never seen the problem i'm checking on manifest in quite this way before.) but in theory, it could help identify the cause.
    Sound Check is an itunes preference. sometimes we get cases of preferences refusing to change for folks because one of the itunes preference files has gone skunky in some way. so it's plausible that you've got a preference file gone bad here.
    let's try an experiment aimed at seeing if this might be the cause of the problem in your case.
    quit itunes.
    head into your user accounts control panel and create a new user account with full administrative rights. (there's help documentation on how to do that at the left of the control panel screen.) while you're in that control panel, switch off "fast user switching" in your logging-on preferences.
    now log out of the old account and log into the new account.
    launch itunes.
    import some music into the (currently empty) library in the user account. (perhaps a couple of different albums with fairly wildly different recording levels.) listen to them with Sound Check on, and with Sound Check off.
    does sound check make a difference in the new account?
    (there's a different set of preference files in the new account and the old account, which is why a preference problem in one account usually doesn't affect preferences in a different account, and why this experiment may indicate the preference files are at fault in the old account.)

  • ITunes Sound Check

    When Sound Check is enabled in iTunes preferences, does this feature carry over to the iPod on my iPhone 4s when I sync?

    It should if it's checked when syncing

  • ITunes Sound Check (volume levelling) not working with AirPlay?

    Playing music from iTunes. Just changed from cable connection to Airport Express. Now the volume fluctuates between songs. Any ideas?

    go to:
    iTunes
    preferences
    advanced
    highlight the "general" tab
    look at the second to last line
    uncheck the box
    i think that should do it for you
    DY
    the box is unchecked thanks for the help though

  • Used Sound Check on my iTunes library-did I make a mistake?

    Hi all,
    I have some rudimentary questions about iTunes, and the "Sound Check" feature in particular.
    I've just completed converting my 18K FLAC song library into ALAC, mainly to use iTunes Genius mixes and to be more compatible with my iPhone and Touch. My library was ripped a few years ago when I bought my Sonos system to get whole-house music. At that time, I ripped my CD's into the FLAC to maintain the highest sound quality possible. No equalization was applied during the ripping.
    Once I loaded my new ALAC songs into iTunes (converted using XLD), I began experimenting with Sound Check to normalize the volume among my songs, especially where the Genius mixes are concerned (I have quite a bit of classical music). While iTunes started the long conversion of my music to use Sound Check, I started reading about volume normalization and the effects of the quality of the sound. I read that Sound Check was really not the right way to go if I wanted to just normalize the volume; that it also affected the sound quality.
    After reading this, I stopped the iTunes Sound Check conversion. Luckily, iTunes had only converted around 400 songs into Sound Check. But now I'm worried about those songs that iTunes did convert, and if I have compromised the sound quality of my ALAC tracks.
    How does iTunes determine the Sound Check settings? I initially thought that Sound Check only affected the playback volume of the songs, but upon reading the discussions, it seems to change other things?
    Does Sound Check store its parameters in a tag(s)? Or does it physically change the songs themselves? I hope that it does not change the songs, or I'll have to reconvert those 400 songs again.
    Is there another program that I can use to just normalize the volume of the songs across my library? In the discussions I read, iVolume was mentioned, but I don't (obviously) have any experience with this program nor any others that affect song playback. Any suggestions as to other apps to investigate would be appreciated.
    Thanks for your time.
    Mike

    Thanks for the reply Jim and for the link to the KB article. I looked through all the tags by showing each one, but I didn't see any that looked like they were populated by Sound Check. I'll read the link you provided to find out more.
    Jim VanLeeuwen wrote:
    I have used iVolume for some time and have been very satisfied. Of course, at age 64 I no longer have audiophile hearing. You can get information here: http://www.mani.de/ivolume/index.html
    I have 52 year-old ears, both of which have tinnitus, so I know about my lack of audiophile hearing I just want to make sure that I don't mess up the audio quality of my songs for the next generation
    Thanks again. I'll look at iVolume more closely.
    Mike

  • Garage Band: Quicktime sound vs. iTunes sound

    I created a song in Garageband (it sounds fine there). I exported it to disk. If I play the file in Quicktime Player, it sounds great -- exactly as it did in Garage Band. However, if I import it into iTunes and play it there, it is pretty badly distorted; lots of clipping and super heavy bass.
    I am not using ANY EQ in iTunes.
    Does anybody know why Quicktime would play the file normally, but iTunes (which I imagine uses Quicktime) would distort it so badly?
    G4 450DP   Mac OS X (10.4.7)  

    Thanks for the reply! I checked all of those things: no Sound Enhancer, no Sound Check and EQ set to "none."
    It's weird ... it's like iTunes brings the track in too "hot."
    I have found that if I drop the volume (on the track, not the main iTunes volume) down to -80 and turn on Sound Check, the track sounds just like it does in Garage Band and Quicktime Player.
    This has got me stumped.

  • Change volume and Balance of speaker using Clip interface

    Hello,
    I am playing more than one Clip simulteniously. I want to change the volume and balance of individual Clip so that they have individual effect on speaker. I mean, if there are two clip then one should have high sound and other have low like that.
    Any help would be appreciated.
    Thanks in Advance.

    Hello,
    I play a sound using Clip interface in Java Sound. i am able to get FloatControl.Type.MASTER_GAIN) control but not FloatControl.Type.PAN)
    I have written a code like this,
    FloatControl gainControl = (FloatControl) clip.getControl(FloatControl.Type.PAN);
    Any help would be appreciated.
    * Thanks In advance*

  • I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

    I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

    iTunes 10.7 is compatible with Snow Leopard.
    You can download it here: http://www.apple.com/itunes/

  • HT5318 Ever since I updated what looked like iTunes 10.6.1 my computer has been corrupted with Malware, which has filled up all available space on my hard drive.  What do I do to get rid of the Malware?

    Ever since I updated what looked like iTunes 10.6.1 my computer has been corrupted with Malware, which has filled up all available space on my hard drive.  What do I do to get rid of the Malware?

    First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
    Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
    First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

  • Adjusting volume within a clip

    I think I have read on the discussion board that iMovie '08 doesn't have this feature, but I want to be sure: Is it possible to adjust part of the volume of a clip within that clip?
    For example, I have a cute clip of my grandchildren, but right in the middle of it, someone in the background is cussing for about two seconds. Splitting the clip to remove that part of the audio ruins the video part.
    This may sound like a broken record, but in iMovie '06 I could adjust the volume by clicking on View Volume Tracks. Not possible in iMovie '08?

    Dear Appleman 1958: One more question. In iMovie '06 there were some cool Video FX features. My little granddaughters particularly liked the fairy dust that could be strewn across video of them. Have those features been taken out of iMovie '08?

  • 'Volume Adjustment' effect is different between iTunes and iPod

    I spent weeks using the 'Volume Adjustment' option on hundreds of quieter albums in my library to consistently match the louder volume levels of newer albums of my library. I wanted playback to be even across the board of my entire library. Some needed a small percentage of increase, some needed the maximum. To my ears' content, I played each adjusted album back in iTunes through powered monitors and studio headphones to make sure each album was just right.
    To my horror, after I sync my new library to my newly wiped and restored 5th gen. iPod Classic, the 'Volume Adjustment' effect is multiplied and the playback on anything that was adjusted is ridiculously louder than even the originally loudest album I have. I am also using the same headphones with my iPod that I used to adjust the albums in iTunes on my MacBook Pro.
    So pretty much my question is, "what the ****?!"
    In iTunes, the 'Volume Adjustment' is great, and playback is perfectly even across the board while I am actually playing back in iTunes. Either I need to go back and change each and every album I adjusted to a much lower adjustment and have to deal with quiet playback in iTunes once again or I can get ear-blasted by my iPod during track changes yet still enjoy the even sound levels in iTunes. I playback in iTunes as frequently as I use my iPod.
    There is no grey area and I am sad about this :'( Why is there no consistency? Has this been discussed before or does anyone have a solution?
    Thanks for your time,

    i don't own a classic but you might want to see if you find a +sound check+ setting on it. you may want to enable sound check in iTunes and the iPod.
    additionally, you might want to check out iVolume.
    JGG

  • When I plug my ipod in I am able to add song to it but the tab that says "on this ipod" no longer shows up so I cannot remove things from my ipod or anything like that. How do I change this weird setting?

    When I plug my ipod in I am able to add song to it but the tab that says "on this ipod" no longer shows up so I cannot remove things from my ipod or anything like that. How do I change this weird setting? On other computers this shows up fine so it is clearly a problem with itunes and not my ipod.

  • Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this?

    Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

    As posted previously:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    If installing Leopard the process is similar in some respects.  If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button.  To install over an existing system do the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Maybe you are looking for