Limit a Pivot Table filter to just one group (Excel 2010)

I use Excel 2010 and want to apply a filter to just one group of data within a Pivot Table.
It appears that filters are applied to the entire Pivot table; is there a way to limit the scope of a filter so it is applied to just a single group of data (grouped using the group function within a Pivot). Alternatively could I apply a filter to just a
selection of rows within the Pivot?
I have tried breaking my pivot into separate tables and applying the filters individually but the tables interfere with each other when expanded/collapsed and generate the Excel "overlapping tables" error message.
Any suggestions gratefully received.
Regards
Pete

just use filter is no possible that apply a filter to one group. maybe slicers is a good choose.
http://office.microsoft.com/en-us/excel-help/use-slicers-to-filter-pivottable-data-HA010359466.aspx
KR

Similar Messages

Row Limit on Pivot Tables

Is there any way that we can set a row limit on Pivot Tables?
Thanks,
Bala.

Limits are set in the instanceconfig.xml file...
ANtonio
Bexpert, Brazil
SIebel/OBI Consulting & Training

Syncing just one 'group' of contacts from Address Book

I've just bought a 3GS iPhone and have transferred the contact numbers from my SIM card to the iPhone.
However, I use Address Book on both a MacBook and an iMac - the entries in these are not always identical. Is it possible for me to 'sync' just one group of contacts from the Address Book on my MacBook to my iPhone and then another group of contacts from my iMac to the iPhone? If any of these contacts have partial details transferred from my old SIM card will that mean I have duplicates or does the iPhone recognise that the SIM has only transferred, say, one contact number and will then go ahead and complete details for email address and home address?
Sorry if this is a very basic question but I don't want to end up with lots of duplicate entries and couldn't find the answer elsewhere
Cheers
Tricia

Yes, true for iPhoto as well. Note that even though the iTunes content is the same, you will want to turn off syncing of media on one of the computers. The restriction of syncing to one library means that even if the libraries have the same content, every time you sync to the other computer, all of the iPhone content will be erased and replaced (with the same content, but it will take quite some time if the amount of content is significant).

TopN limit on pivot table row display, not selection

Hi all,
I'm trying to create a pivot table which only displays the top 20 rows of data I'm interested in. I know I can filter the data with the TopN function or one of the columns "is in top n" filter, but I'm displaying the data as a percentage, and I want these to accurately refelect the full data available not only the items displayed:
Example:
Text-Description 1, 160, 80%
Text-Description 2, 20, 10%
Text-Description 3, 10, 5%
Text-Description 4, 10, 5%
Say I want to only show the top 2 rows, and get:
Text-Description 1, 160, 80%
Text-Description 2, 20, 10%
Whereas what I actually get is:
Text-Description 1, 160, 88.8%
Text-Description 2, 20, 11.1%
The percentage figure is calculated from the data selected, not just to limit the rows displayed. My other way through this is to get the "text description" to also have a conditional field that returns "Others" that uses the TopN function, where I'd get:
Text-Description 1, 160, 80%
Text-Description 2, 20, 10%
Others, 20, 10%
Does anyone have any other ideas?
Thanks in advance

Create a dashboard prompt and set the formula as i and set it to edit box and give the presentation variable name.
use this presentation variable in topn function like
TOPN(column,@{variablename}{defaultvalue})
Venkat V

When selecting a row from a view with a nested table I want just ONE entry returned

Does a nested table in a view "EXPLODE" all values ALWAYS no matter the where clause for the nested table?
I want to select ONE row from a view that has columns defined as TYPE which are PL/SQL TABLES OF other tables.
when I specify a WHERE clause for my query it gives me the column "EXPLODED" with the values that mathc my WHERE clause at the end of the select.
I dont want the "EXPLODED" nested table to show just the entry that matches my WHERE clause. Here is some more info:
My select statement:
SQL> select * from si_a31_per_vw v, TABLE(v.current_allergies) a where a.alg_seq
=75;
AAAHQPAAMAAAAfxAAA N00000 771 223774444 20 GREGG
CADILLAC 12-MAY-69 M R3
NON DENOMINATIONAL N STAFF USMC N
U
E06 11-JUN-02 H N
05-JAN-00 Y Y
USS SPAWAR
353535 USS SPAWAR
SI_ADDRESS_TYPE(NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NUL
L, NULL)
SI_ADDRESS_TAB()
SI_ALLERGY_TAB(SI_ALLERGY_TYPE(69, 'PENICILLIN', '11-JUN-02', NULL), SI_ALLERGY
TYPE(74, 'SHELLFISH', '12-JUN-02', NULL), SIALLERGY_TYPE(68, 'PEANUTS', '13-J
UN-02', NULL), SI_ALLERGY_TYPE(75, 'STRAWBERRIES', '13-JUN-02', NULL))
SI_ALLERGY_TAB()
75 STRAWBERRIES 13-JUN-02
*******Notice the allergy entry of 75, Strawberries, 13-JUN-02 at the
end. This is what I want not all the other exploded data.
SQL> desc si_a31_per_vw
Name Null? Type
........ Omitted uneeded previous column desc because of metalink
character limit but the view is bigger then this.......
DEPT_NAME VARCHAR2(20)
DIV_NAME VARCHAR2(20)
ADDRESSES SI_ADDRESS_TAB
CURRENT_ALLERGIES SI_ALLERGY_TAB
DELETED_ALLERGIES SI_ALLERGY_TAB
SQL> desc si_allergy_tab
si_allergy_tab TABLE OF SI_ALLERGY_TYPE
Name Null? Type
ALG_SEQ NUMBER
ALG_NAME VARCHAR2(50)
START_DATE DATE
STOP_DATE DATE
SQL> desc si_allergy_type
Name Null? Type
ALG_SEQ NUMBER
ALG_NAME VARCHAR2(50)
START_DATE DATE
STOP_DATE DATE

Can you explain what do you mean by the following?
"PL/SQL tables (a.k.a. Index-by tables) cannot be used as the basis for columns and/or attributes"There are three kinds of collections:
(NTB) Nested Tables
(VAR) Varrying Arrays
(IBT) Index-by Tables (the collection formerly known as "PL/SQL tables")
NTB (and VAR) can be defined as persistent user defined data types, and can be used in table DDL (columns) and other user defined type specifications (attributes).
SQL> CREATE TYPE my_ntb AS TABLE OF INTEGER;
SQL> CREATE TABLE my_table ( id INTEGER PRIMARY KEY, ints my_ntb );
SQL> CREATE TYPE my_object AS OBJECT ( id INTEGER, ints my_ntb );
/IBT are declared inside stored procedures only and have slightly different syntax from NTB. Only variables in stored procedures can be based on IBT declarations.
CREATE PROCEDURE my_proc IS
   TYPE my_ibt IS TABLE OF INTEGER INDEX BY BINARY_INTEGER; -- now you see why they are called Index-by Tables
   my_ibt_var my_ibt;
BEGIN
   NULL;
END;That sums up the significant differences as it relates to how they are declared and where they can be referenced.
How are they the same?
NTB and VAR can also be (non-persistently) declared in stored procedures like IBTs.
Why would you then ever use IBTs?
IBTs are significantly easier to work with, since you don't have to instantiate or extend them as you do with NTB and VAR, or
Many other highly valuable PL/SQL programs make use of them, so you have to keep your code integrated/consistent.
There's a lot more to be said, but I think this answers the question posed by Sri.
Michael

ADF Pivot table Filter

Hi,
I have pivot table for all Employees with details of Employeename, Project Names and Number of Work Hours on each project in pivot table.
I have ResourceName,ProjectName,ProjectTask on Row Edges and Work Hours with Weekly on column edges in the Pivot table.
Intially when I run the application I can see all the projects with Employee total hours on all projects.
I want to filter projects data on each employee but I want to keep total hours on all projects same.
for e.g. I am working on three projects Project x,Project Y and Project Z.
for week 12/24 to 12/31 I have 15 Hours on Project X, 15 hours on Project Y and 10 Hours on Project Z total 40 hours on three projects.
once I apply the filter by project through af:querypanel view criteria and select project X i want to see project x in the second level 15 Hours and Total of 40 Hours on the first level,
right now once I apply the filter throug af:querypanel I can see only 15 Hours on both levels filtering all rows.
Please give me suggestions on this.

In short, what you need is a custom af:table QueryListener, which looks like:
public void processQuery(QueryEvent ev){
     FilterableQueryDescriptor filterQD = (FilterableQueryDescriptor)getYourTable().getFilterModel();
     Map filterCrit = filterQD.getFilterCriteria();
     Object Notes = filterCrit.get("Notes"); // this is a proposed search value !
     // THEN, YOU CAN USE THAT VALUE IN ODER TO APPLY CUSTOM VIEW CRITERIA TO A VIEW OBJECT,A WHICH FILTERS
    // DATA REGARDING %Notes%

ROW limit in pivot table

Hi Kings,
My requirement is show only 250 rows in pivot table view..
is there any posibilities like table view to restrict the no.of displaying rows in pivot table..
Regards,
Junior..

Thank you David.
We already tried what you have suggested.
The look and feel is not satisfied the user needs..
If we show like a view selector ad pagiation they are asking the two selectors should display in sigle row like,
Pagiation-----------------View_selector
1-250 -----------------Pivot1
here we are using so many pivot table views in view selector.
if it is possible with 1 view selector and 1 column selector or 1 view selector and 1 pagination meas OK..
how can we achive this.
please don't think i am Changing my requirements again and again..
Regards,
Junior...

How can I transfer just one "group" of contacts to my Prius handsfree/bluetooth?

Apple had to replace my iPhone 5S because of a hardware problem. I had created a list of about 100 contacts to be transferred to my 2010 Prius onboard contact list. I did that in late 2013 by deleting all my contacts, importing the one group, transfering that to the Prius- then adding back all my contacts.
Having spent 1 hour on the phone with tech support today, I was told that with the new IOS- that can no longer be done. I can't believe there is no work-around. I only need 100 of the contacts out of my 3000+ to go into the Prius contact list. Entering over 100 manually will take too long- so really want to just sync via bluetooth. HELP!!!!!
Thank you.

You can't.

Widgets in table cells? Just one only?

I can get one textfield to respond to user input, but more than one widget in a table cell doesn't seem to work unfortunately.
Anyone else get this to work?

Thanks Peter
Can you just walk me through dumping Pages 5 and getting to the Applications/iWork folder - and does this mean that when I see future Pages Upgrades I should block them?
I'm new to Apple so need a step by step
Many thanks
Glyptic

Can't receive messages from just one group. Can receive messages from each of the individuals in the group separately

I am not receiving messages from one particular group of people on my phone. I am receiving other group messages and can receive messages from each person in the group individually. iPhone 5c.

I am right there with you. This describes my problem to a T. Only other issue I am having is group texts. Iphone users who include me in a group text still send as imessages as well, so even if I text them first and they reply, it send as an imessage. Get it together apple.

How can share my location in just one group message?

If I enable location sharing and share it in a particular group message, my location is then shared with ALL group messages I have in my history. Not cool. Anyone know how to fix this?

Hi BKalafut,
Thanks for visiting Apple Support Communities.
I recommend trying these steps, first with the group message, and then with the contacts who are in the group message:
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
You can find these steps here:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
All the best,
Jeremy

Can't sync just one "Group" within Address Book anymore!

Is anyone else having a problem like this or is it specific to me:
iSync no longer offers me the option of selecting a specific Group within my Address book, for syncing with my Moto RAZR V3 phone. The only option is to sync "All Contacts" -- but my Address Book exceeds the capacity of my phone's memory. As a result, my most recent sync attempt wiped out my entire phonebook on the RAZR and I am unable to restore it with iSync.
What happened to the ability to select a specific Group for syncing? Is this a "bug" or a new "feature" of the post-MobileMe era?

That ability is definitely still there - although I have seen iSync forget to show custom Groups before.
First, make a backup of your Address Book and iCal data by using the relevant command on the File menu in each app.
Then try backing up then deleting the SyncServices folder found in ~/Library/Application Support/
Restart the Mac, and re-load iSync. If that doesn't help some of the links below may do:
http://discussions.apple.com/thread.jspa?messageID=6112218
http://discussions.apple.com/thread.jspa?messageID=6566113&#6566113
http://discussions.apple.com/thread.jspa?messageID=6064923
http://discussions.apple.com/thread.jspa?messageID=3360345&#3360345

Here's an Odd one: Microsoft Excel 2010 Workbook "randomly" Becoming Protected

Either there are gnomes in our servers, someone is lying, or some sort of glitch is causing this issue (and honestly I'm not even sure which is most likely), but here's my story:
User is working on an excel workbook. This user accesses this file all the time with little to no problems. One day a week or two ago the user finds the workbook is password protected, but doesn't even know how to do this, much less remembers locking it.
My boss restores a backup of said document that is not password protected. User is able to access file, edit it, save it, etc.
The next day that same file (and only that file) is locked for the second time. We use a back door method and save a new copy with a new filename. User edits file, saves it, etc.
The next day that same file (and yes, only that file) is locked for the third time.
Am I crazy? Is someone lying to me? Do gnomes really go inside computers and wreak havoc to make me lose my sanity?
Any thoughts would be greatly appreciated.
I have the file and plan on saving an unlocked copy locally to see if the issue presents itself again.
Windows 7 computer running Office 2010; Windows 2012 server

Have you got over this odd issue yet?
If this workbook is saved in a shared drive, maybe you need to track who uses the excel file.
http://stackoverflow.com/questions/18319162/how-do-i-track-who-uses-my-excel-spreadsheet

How do I filter on multiple values / labels within a Pivot Table which points to a Power Pivot Model

Hi,
How do I filter on multiple values / labels within a large data set within a Pivot Table which points to a Power Pivot Model. I am current using Excel 2010 64 bit. I intend to empower users to achieve this by simply using the Excel user interface, not by
using Excel formula or DAX. Please find the attached screen shot as a worked example, also in my real life example not all the values are available in the drop down. You can't use a slicer for the same reason as you can't use a drop down. I guess what I was
hoping for is for the user to be able to enter AND or OR within the associated dialog box. Is there any way around this?
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Hi
This is the forum to discuss questions about Microsoft Excel develop (VBA, Automation). For your question is more about pivot table features for Excel, I will move
this thread to the TechNet forum for Excel.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share
their knowledge or learn from your interaction with us.
Thank you for your understanding.
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error with Pivot Table in 10.3.6 weblogic server

Hi Everyone,
I created an ADF application and in that i have a Pivot Table i developed using Jdeveloper 11.1.1.3 it was working fine when we deployed the application in Weblogic server 10.3.3.
Now DBA's upgraded the Weblogic server to 10.3.6 so i downloaded Jdeveloper 11.1.1.6 and generated the EAR file and deployed in the new 10.3.6 server. The pivot table is not working i am getting the following error message
Root cause of ServletException.
java.lang.NoSuchMethodError: oracle.adfinternal.view.faces.bi.renderkit.imageView.ImageViewRendererUtils.isAttachmentMode()Z
at oracle.adfinternal.view.faces.bi.renderkit.pivotTable.RichPivotTableRenderer.getRowBlockSize(RichPivotTableRenderer.java:1489)
at oracle.adfinternal.view.faces.bi.renderkit.pivotTable.RichPivotTableRenderer.getPivotTableEncodeContext(RichPivotTableRenderer.java:1616)
at oracle.adfinternal.view.faces.bi.renderkit.pivotTable.RichPivotTableRenderer.encodeAll(RichPivotTableRenderer.java:1789)
Here is the code
<dvt:pivotTable id="employeeDocuments_pt"
                        value="#{bindings.lum_EmployeeDocumentsReportView1.pivotTableModel}"
                        binding="#{backingBeanScope.backing_LUM_EMPLOYEE_DOCUMENTS_REPORT.employeeDocuments_pt}"
                        var="cellData" varStatus="cellStatus" sizing="auto" summary="Enrollments"
                        inlineStyle="width:1400px; height:900.0px;"
                        rowFetchSize="-1" columnFetchSize="75">
            <dvt:dataCell dataAttribute="DocumentFlag">
            <af:selectBooleanCheckbox id="idselectbooleancheckbox" label="SELECT" value="#{cellData.dataValue}"
              readOnly="true"/>
            </dvt:dataCell>
            </dvt:pivotTable>
The code remains the same nothing changed from 10.3.3 to 10.3.6 and i even tried deploying the ear file generated from jdeveloper 11.1.1.3 even that did not work.
Is this soemthing related to libraries issue?
Can some one help me on this.
Thanks,
Harika.

Timo,
This the total code for Pivot table and to export that to Excel i think something in the below code is not supported in 11.1.1.6 and later versions. Can i use <dvt:exportPivotTableData> in commandButton ? because when i comment this code it is working fine.
<af:commandButton text="EXPORT TO EXCEL" immediate="true"
                            binding="#{backingBeanScope.backing_LUM_EMPLOYEE_DOCUMENTS_REPORT.export_btn}"
                            id="export_btn" visible="false"
                            inlineStyle="font-family: Verdana, Arial, Helvetica, sans-serif; font-weight: bold; font-size: small;">
        <dvt:exportPivotTableData type="excelHTML" exportedId="employeeDocuments_pt"
           filename="Department_TrainingDocuments_Report.xls" title="PivotTable export"/>
                            </af:commandButton>
<dvt:pivotTable id="employeeDocuments_pt"
                        value="#{bindings.lum_EmployeeDocumentsReportView1.pivotTableModel}"
                        binding="#{backingBeanScope.backing_LUM_EMPLOYEE_DOCUMENTS_REPORT.employeeDocuments_pt}"
                        var="cellData" varStatus="cellStatus" sizing="auto" summary="Enrollments"
                        inlineStyle="width:1400px; height:900.0px;"
                        rowFetchSize="-1" columnFetchSize="75">
            <dvt:dataCell dataAttribute="DocumentFlag">
            <af:selectBooleanCheckbox id="idselectbooleancheckbox" label="SELECT" value="#{cellData.dataValue}"
              readOnly="true"/>
            </dvt:dataCell>
            </dvt:pivotTable>
Thanks,
Harika.

Limit a Pivot Table filter to just one group (Excel 2010)

Similar Messages

Maybe you are looking for