BALDAT long2log conversion for online reorg

Hi,
I am considering doing a long2lob conversion for table BALDAT
to be capable of online reorgs after archiving/delete runs for BALDAT.
I am a bit scared about the possible performance impacts that note 835552
is threatening about.
Has anyone done this already for table BALDAT and can tell a bit about
the impacts that had to be dealt with.
Thanks
Volker

ya, I tend to be tedious sometimes
Now the sandbox is my own toy (No other users on it),
BALDAT there has some 400M and after a couple of counts right before
and after and around I am pretty confident that every action was already
completely in the buffercache with nearly no I/O involved for any action
(This is why I did the reorg right after the long2lob again, just to be sure).
Now 80 secs Delta do not seem to do harm, but the beast I need to apply
this to has quite a couple of TB, BALDAT has 100G and I have processings
that do write to BALDAT with 120-200 processes when they are finished
all at the same time.
I do not like to find these to be serializing on a BLOB Segment header later.
And as this step is only revertable with quite some efford, I like to be sure beforehand.
Volker

Similar Messages

  • NTSC 24p conversion for PAL project

    I've got a "conversion" issue I'm wondering if I can get some help with.
    I'm working on a project primarily shot in PAL DV, though there are a handful of tapes shot 24p advanced NTSC. I've already captured all of the footage (everything is at Photo Jpeg resolutions to save drive space. The NTSC 24p footage was captured at 29.97- this is how it appears on the tape). Now I'm wondering the easiest and most efficient way of working with the NTSC and PAL footage together in the same PAL timelines.
    I spoke with Graeme Nattress today and he suggested recapturing and removing the pulldown with Cinema Tools which I don't really know how to do. I'm sure it's basic and do-able, but if I can avoid recapturing all of the NTSC footage, I'd like to.
    So, I figure I can convert the NTSC footage to PAL via Compressor or the Nattress convertor, but as far as I understand, I won't be able to preserve the tape source timecode. This is an issue for me, since I've captured everything at low - photo jpeg- resolutions, and will have to return to the master tapes for onlining.
    If I've gotta deal with recapturing or with potentially eye-matching all of the NTSC footage when we got to online, so be it. If there's another- that'd be better obviously. Any other thoughts or suggestions would be really appreciated.
    Many thanks, and happy new year.
    Nate Smith
    System:
    G5 Dual 2ghz
    2 gb memory
    Final Cut Pro 4.5
    2 external 250 gb Lacie firewire drives

    Welcome to the forum Nate!
    The only way I can think of that would preserve the TC would be to edit the 29.97 footage directly into the PAL sequence... Never tried this and wonder about bugs in the area surrounding the recapture, but it should recapture OK... I'd do a test of this to make sure the workflow will work OK... I'll also add that the NTSC footage will look pretty rough in the offline res probably when played back (and rendered each time you want to use it) in the PAL offline sequence... but that may not be such an issue. If it is, then you'll have to do what Graeme suggested first, then eyball it all in the online session as you've guessed. OR maybe just put it in twice on top of itself. Lower video track being the NTSC directly cut in, and upper track being the "transformed" version of the same. Delete V2 when you recapture...
    In any event, you'll still need to do what Graeme suggests for the Online session. His plugin will make the time needed to change the NTSC to PAL go a lot faster than using Compressor... and removing the pulldown pattern in Cinema Tools is a snap actually. It's just a matter of importing the shot needed, then selecting remove pulldown pattern from the file menu. Read the instructions on page 192 of CT's Help, it's really easy to do... Be sure that the footage is shot 24P and not 24PA.. if PA you'll want to recapture it removing the advanced pulldown pattern on the fly with FCP and you won't need to use CT at all in this scenario, just Compressor or Graeme's plugin to change that 24p to PAL...
    HTH
    Jerry

  • How to use psapundo during online reorg

    Hi Experts,
    I'd like to exuecute online reorg on AIX6.1&Oracle10g.
    Target table size is 300GB (not tablespace), therefore I 'd like to proceed carefully.
    [Question]
    Could you tell me needed PSAPUNDO size?
    PSAPUNDO is 130GB, and I knowPSAPUNDO would be reused after commit.
    But I can't have confidence to success reorg due to lack of PSAPUNDO.
    Best Regards,
    Toshi

    Hi Toshi,
    there aren't any special requirements for the size of the UNDO tablespace during an online reorg.
    As this is done via DBMS_REDEFINITION and this in turns uses materialized views, the creation of the data in the target tablespace doesn't require much UNDO.
    regards,
    Lars

  • Online reorg

    Hi there!
    How can I tell if there is a online reorg going on that is started from db13?
    "show detail" on tablespaces and "get snapshot" from db2 cl does not show any changes in the tablespace state. Normally when reorg is runnig the state should be 0x400, but when running online reorg from db13 the state remain in 0x0000.
    The reason I need to be able to check this is to know when the following online backup can start.

    Hi Tomas
    In Version 8 you could use
    SNAPSHOT_TBREORG table function
    >>-SNAPSHOT_TBREORG--(--dbname--,--dbpartitionnum--)-----------><
    The schema is SYSPROC.
    The SNAPSHOT_TBREORG function returns table reorganization information in the form of a result set.
    If no tables have been reorganized, 0 rows are returned.
    To obtain real-time snapshot information, the user must have SYSADM,SYSCTRL, or SYSMAINT authority.
    In V8 SNAPSHOT_TBREORG the REORG_STATUS is BIGINT in difference to the V9 SNAP_GET_TAB_REORG , where it is VARCHAR and more readable .
    REORG_STATUS
    Description
        The status of an in-place (online) table reorganization. This is not applicable to classic (offline) table reorganizations.
    Started/Resumed: SQLM_REORG_STARTED
    Paused: SQLM_REORG_PAUSED
    Stopped: SQLM_REORG_STOPPED
    Completed: SQLM_REORG_COMPLETED
    Truncate: SQLM_REORG_TRUNCATE
    see sqlmon.h for the corresponding values .
    Hth + best regards
    dirk

  • Is there a save function for online forms?

    Hi, I've created an online form which requests quite a lot of information from those who it is sent to.  Because of its size, I have made use of the skip logic rules to so that users can quickly skip sections that don't apply to them.  Notwithstanding this, the form asks questions which users may need to reseach and come back to so it wouldbe really useful if the form had a save function.  Does anyone know if such a function exists and if not, whether there are there imminent plans to develope one?
    If not, regreattably I will have to try and find another solution for online information gather that has a save and return function.

    hi randy
    I wholely support the request for a save feature for online forms, any idea of an ETA for this?
    Also to expand on this- the ability to print the  web form would be brillant.
    a few options for the  web forms submit to print, save.
    Web forms after/before  submission maybe to save as a pdf locally -  which then could be printed out.

  • Getting error while running script for online backup

    Hi,
    I am running a script for online backup but ended up with an the below error.
    *ERROR* [Backup Worker Thread] com.day.crx.core.backup.Backup Failed to create temporary directory
    Please help out in resolving this.
    Thanks in Advnace.
    Maheswar

    Hi mahesh,
    If you are using backup feature from crx console, I mean http://localhost:4502/crx/config/backup.jsp  I can say that we had also some problems with this functionalities.
    First off all what you need to check are the permissions, because when you check a source code there is line which creates a File object using a path specified by you to make a backup of repository.
    File targetDir = new File(req.getParameter("targetDir", listDir.getParentFile().getAbsolutePath()));
    You need to have sure that the proper read write access has been granted for this path.
    Another issue is that maybe there was already prepared some hotfix if you are using CQ5.4. Please refer to the following link:
    http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/CRXOnlineBackup.html
    and also to this one:
    http://dev.day.com/content/docs/en/crx/current/release_notes/overview.html which contains a hotfix number #34797 which was applied to backup.jsp file.
    Regards,
    kasq

  • Unit of measure conversion for CIN is not relevant for pricing

    During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
    Any light how to fix this issue?
    Thanks,
    Suseela. V

    Dear Suseela,
    You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
    Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
    Hope it will help. Thanks!
    Regards
    Indra

  • What are the special conversions for time in update rules?

    What are the special conversions for time in update rules?

    Hello,
    Special conversions for time in update rules are automatically conversion rules.
    Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
    Assign points if this helps,
    Regards,
    Jorge Diogo

  • Sales Order Conversion for Go-Live

    Folks,
    I would like to get your expert thoughts on sales order conversion for go-live. I will give my thoughts below and would like to see if you can extend them and make this better.
    1. The environment is this: the order entry systems are several external systems interfacing  with SAP CRM. Therefore, there are two options to bring the sales orders to SCM: i) Use the same interface (BAPI_APO_AVAILABILITY_CHECK that is called from CRM) and create the orders, or, ii) Create the sales orders in ECC and then use the sales order integration model. Note that this is the only time sales orders will come from the ECC system. In steady state, they will come from CRM and based on the SPM scenario that SAP has enabled, they WILL NOT be replicated in ECC
    2. Ensure that all deliveries in the system have been executed. That is, there is no stock that has been assigned to a delivery and the delivery has not been shipped. If this is not the case, you have to bring the deliveries into the system also. So, to clarify, no outstanding deliveries will be brought into the system as part of the conversion.
    3. Sales order fields related to BOP will be populated through program or by other means. This is implementation specific. Some example fields are: i) Sales Org, ii) Delivery Priority, iii) Shipping Conditions on the header, iv) Transportation Zone of customer, v) Ship-to Party number, etc.
    4. Run BOP for all the sales orders based on the criteria that has been defined for this conversion. Note that the criteria for the conversion could be different from the criteria that we will use for steady state.
    Could you add any missing steps?
    Thanks,
    Satish

    thanks nitin
    i would like to use it as prepayemnt itself
    but when i am trying to load using oe_payments base table it loads
    but when i use data and use in oe_payments_iface all it doesnot load after i run the order import program
    can u plz suggest me where i am going wrong
    thnaks

  • Why does 'User not registered for online use' show up when I try to import a cd into itunes. None of the cd info shows up either

    Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.

    Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
    I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done?

  • G5 as a Server for Online Gaming?

    I am curious as to if a G5 can be used for a Server for Online Gaming prior to my going out and purchasing one. I am new to Apple computers and would like to know if i bought the Full Upgraded version.. would the game work and be able to handle the amount of gamers that play the game.. (currently approximately 200-300 players at any given time)
    thank you for the assistance...

    Yes it certainly can but which online games have
    server versions that run on a G5?
    Maybe i didnt explain it better... I want to use my G5 to be the HOST server for the online game.. is "this" possible??

  • Can anyone Explain about Data conversion for Material master In SAP MM

    Can anyone Explain about Data conversion for Material master, Vendor  In SAP MM
    Thanks

    Hi,
    Refer following link;
    [Data Migration Methodology|http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc]

  • Process flow with configuration for online payment of vendors

    Dear friends,
    I need the process flow with configuration for online payment to vendors through rtgs or neft.
    Please help me in this regard. One of my client wants to implement online payment process instead of cheque payment.
    thanks and regards
    satya

    1) Payments are initiated at the corporate SAP System using APP and converted into IDOC
    Could you please tell me the steps in converting the app into idoc.
    There are standard Idoc used for the same , for APP it would be PAYEXT, You need to use this Idoc type.
    You define the EDI payment method and assign the program in FBZP (RFFOEDI1)which would created payment medium.
    i believe in the app we will create the proposal and run the payment run, after payment proposal created what are the config steps involved in createing the payment run. for example for checque payment we will maintian variant for cheque printing.
    The payment run config is done in FBZP, which would include definf check PM and assigning house bank sub gl etc.
    2) PI at Client End receives the input through IDOC for the payments
    Pl means? and how the client will recieve this idoc what is the set up has to be made?
    PI(Process Integration) middleware which will send bank files from sap to bank and vice versa.
    3) Bank PI receives the payment and converts the same RTGS/NEFT format
    4) Payment Data is received at the Bank RTGS/ NEFT server for further processing
    how the payment data will be recieved by bank what is the process?
    This is again via PI or any thoird party tool which will send bank files to sap as Idoc, The idoc message type is FINSTA.
    or this in SAP you will have to configure the following:
    *House bank with partner profile
    *Outbound parameters                      what is meant by outbound paramenters and how to create and where to maintian
    *Inbound parameters                          what is meant by inbound paramenters and how to create and where to maintian
    The outbound and Inbounmd idoc's are the one which we send(PAYEXT) and rec from bank(FINSTA).  you create partner profile in WE20 and create partner profile once you create you assign outbound and inbound message types in there.
    *EDI Compatible payment methods        how to know about the compaitable payment methods
    Please goto house bank FI12 and you will see this in there, assign the PM used.
    *APP config                                        i know the app config for cheque payment, for this scenairo any additional settings?
    It would be pretty much same, you will have to define the PM used and Payment medium and remaining configuration in FBZP.
    *Bank details in Vendor :
    You will have to maintain the bank details of the vendor in vendor master.

  • I am receiving a lot of pop-up ads on website pages. It has only recently started happening. They open new windows with ads for online gambling, online dating and other things. They are annoying and I want them shut off. Please help me

    I have recently started seeing millions of pop-up ads on website pages. It is not something that normally happens. They open new windows with ads for online gambling, online dating among other things. I am growing sick and tired of these ads, and have tried multiple things. I have uninstalled and reinstalled software, I have blocked pop-up ads and unenabled Java script. I have tried everything I could find, but nothing has worked. I have even downloaded AdBlock and Clean Genius. Nothing has even remotely changed this annoying trait. I hope this can be a quick fix I can perform and not something that will have to be done by a tech-hand. Please, if you know anything about this issue, let me know how to fix it.
    Thanks.

    Unfortunately, you have installed malware by clicking on a pop up ad.
    Removal instructions here >>  The Safe Mac » Adware Removal Guide
    Uninstall CleanGenius >  Mac App uninstaller: How to uninstall the Macintosh applications with CleanGenius uninstaller on Mac OS X?
    Third party maintenance utilities are not necessary on a Mac and can actually do more harm than good and cannot remove malware > Mac App uninstaller: How to uninstall the Macintosh applications with CleanGenius uninstaller on Mac OS X?

  • Why is adobe requiring me to make a purchase in order for me to create a pdf from word? I paid for the service in April which included unlimited conversions for a year

    why is adobe requiring me to make a purchase in order for me to create a pdf from word? I paid for the service in April which included unlimited conversions for a year

    Make sure you're actually logged-in to your account.

Maybe you are looking for