BAPI_ALM_NOTIF_LIST_PARTNER working perfectly in R/3 giving error in XI
Hi all,
the above BAPI working fine in R/3. The Same inputs are passed but it is giving error. The input and output are given below in XML format as it is handled in XI:
Input message
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:BAPI_ALM_NOTIF_LIST_PARTNER xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
<COMPLETE>x</COMPLETE>
<NOTIFICATION_DATE>2008-08-08</NOTIFICATION_DATE>
<PARTNER>0000000001</PARTNER>
<PARTNERFUNCTION>vw</PARTNERFUNCTION>
<NOTIFICATION />
</ns1:BAPI_ALM_NOTIF_LIST_PARTNER>
output message
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:BAPI_ALM_NOTIF_LIST_PARTNER.Response xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <RETURN>
<TYPE>E</TYPE>
<CODE>IM718</CODE>
<MESSAGE>E718 Only specify partner function together with partner number</MESSAGE>
<LOG_NO />
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1 />
<MESSAGE_V2 />
<MESSAGE_V3 />
<MESSAGE_V4 />
</RETURN>
<NOTIFICATION />
</rfc:BAPI_ALM_NOTIF_LIST_PARTNER.Response>
Can any body help in resolving this problem please.
Regards,
Venkat
Thank you amrute for your reply. You are right we do faced similar issues in many other occations and sent exact data and could resolve the issues. In this case also we have given in exact format for all fields. Date format as given in this case is same as what was given in another working XI scenario. However I look at the data type of date to be sure.
As you see the message is regarding partner and partner function. If you have any other point of view may please be indicated.
Regards,
Venkat
Similar Messages
-
Working in BEx Analyzer but giving error dump in Web Analyzer
Hello Experts,
I have a BEx Query, that has couple of customer exits for initial filter selection, and some base KFs and conditions as part of definition. When I run this query in RSRT or in Bex it was running fine, and results showing up in 3 to 5 seconds hardly 10 seconds.
but the same query throwing error in Portal / Web Analyzer.
error contains;
Error Summary : error processing the current request
root cause: The initial exception that caused the request to fail was:
java.lang.UnsupportedOperationException
Messages: warning there is a condition on Plant and Material to suppress results.
contest: under this heading many line of HTML code
when I debug the query in RSRT, I found any issue, all the exits, and the query is quite OK.
does anyone has any idea, whats going wrong?
we cannot suspect the portal / Java patches or anything, Because we have other queries running good.
could someone give me some idea..how to go through this portal/web related errors.?
Appreciate your time and helpThanks for your help.
This issue was caused by "Bad programming in Customer Exit". Exit is trying to give too many Single values as selection to certain batch characteristics plus some are redundant. So code logic modified to fetch distinct values hence problem solved.
it worked in BEx analyzer but not in Web is just because of its limitations. As I said there is no syntax errors in the exit rather bad logic.
Thanks Again -
OCCI working in VS6.0 and giving error in VS2005 - Please help
I am trying to recompile one of the OCCI program I have created in VS6.0, in VS2005. I am ending up with errors.
During
env = Environment::createEnvironment (Environment::DEFAULT);
lot of DLLs (oranro10.dll, orantcp10.dll,oranhost10.dll, ORANCDS10.DLL, orantns10.dll, ORAPLS10.DLL,ORASLAX10.DLL, ORAPLP10.DLL, orahasgen10.dll etc...) are saying Cannot find or open a required DBG file.
During
conn = env->createConnection (user, passwd, db);
Unhandled exception at 0x612f89e9 in occitrail.exe: 0xC0000005: Access violation reading location 0xcccccccc.
Whether any body has idea why this error is happending and What I have to do for not to get this error.
Thanks in advance for your help,
Chandra.Hello,
to be on the safe side I advise to do :
- install Oracle 10.2.0.3.0 Instant Client (not sure whether version 10.1. is causing the problem with your OCCI software)
- install the OCCI 10.2.0.3.0 Patch 13
- clean & rebuild your application linking the oraocci10.lib or oraocci10d.lib (debug version) provided with the patch
The problem of your application could be caused by different runtime versions of the microsoft mfc/crt runtime libraries used by your main program and occi dll. - Welcome to DLL/Manifest hell ;-)
You can have a look at the manifest file you got with the OCCI patch, there you see which runtime DLLs OCCI is expecting.
You can check which Microsoft runtime DLLs are loaded using the software 'dependency walker'. Just make sure ONLY one version of the runtime will be loaded (e.g. mfc80.dll, msvc80.dll ... VC80 versions are used with VS2005).
Check if your application is loading the new, patched OCCI DLL (oraocci10.dll) not some old ones....
http://www.dependencywalker.com/
Good luck
Horst -
Hi,
I transported webi documents + universe from a development server (BI 4.1. SP2) to a test server (same release). I can open the documents with the WEBI rich client, but I am unable to open them with the launch pad (error ...opendocument' api. (error err_wis_30270)).
Does anyone have a clue where there could be a difference in the settings that cause this behaviour?
Thanks,
Sandra.Can you check this KB?
1684675
- An internal error occurred while calling 'openDocument' API. (Error:
ERR_WIS_302070) while opening WebIntelligence reports in SAP BO BI 4.0. -
My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect. I turned it off and restarted it 3 times now. I have an iPad 2 and the app store works flawlessly with it. What is going on?
Same here on my lpad2. Can access the web just fine from browsers but cannot install new apps or updates in appl store. Seeing a few others reporting same issue tonight so likely an apple server issue and staff will notice it in network monitors and fix it...sometime this weekend.
Rob -
My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:? -
Error in MB1C but works perfectly in MIGO for movement type 501.
Hi
I get an error in MB1C but works perfectly in MIGO for movement type 501
here is the error Account 353300 requires an assignment to a CO object.
I know for this if we add the co object in OKB9 it works.
But my question is - how it works in MIGO transaction but throws an error in MB1C
Any idea ? has any one faced this kind of an issue ? Please let me know.
Thanks
DkmurthyHi
Are the entires same in both the transactions? Means did you check 353300 GL was hit when you posted through MIGO?
Check in FS00 - for GL account 353300 - under bank/interest tab - double click on field status variant -> under Additional account assignments - CO object is ticked as mandatory?
Thanks -
I have an Imac Snow Leopard 10.6.3 1TB hard drive , it has a partition of 100gb for Windows 7 using Bootcamp (only for games)
The computer was kind of slow one night. The next day it was so terrible slow that I decided to restart it, but it never showed OSX again. If I try to boot into single user mode it shows Windows Boot Manager. Even booting with alt only shows Bootcamp Windows. Is like OSX dissapeared.
I tried Disk utility and it showed an "inlavid node structure" error, "Disk Utility cannot repair this disk"
I also used Diskwarrior, the test was relatively fast and showed this at the end "Disk Warrior has successfully built a new directry for the disk. The new directory cannot replace the original because of disk Malfunction. Disk Malfunction is a failure of or damage to any mechanical component of the disk or any component connected to it"
I also did a S.M.A.R.T. test from diskwarrior which turned out ok
I used Apple Hardware test, (booting with D and the Applications DVD). It goes through several things, even logic board but when it reaches "testing in progress" almost at the end it gets stucked. I have tried the simple and complete test in many different ways, with mouse, without, everything disconnected, it doesnt matter, clicking the "Stop Testing" button or using cmd+period (as instructed on screen) doesn't stop the test. The "Total Time Testing" field also stops counting. I have to force shut down with the power button every time.
But here comes the most odd part of this story. The computer now almost always boots in the Windows 7 partition which works perfectly. I can chat, use viderocamera, save, delete, listen to music, watch videos, etc.... I even enter from Windows all my MAC Archives and backuped almost the 900Gb I had with no problem (great thing to use Bootcamp, never imagined it will be this useful).
So my question is, WHATS WRONG? The hard drive? the logic board? the fan? I need to know in order to buy the replacement. I have no warranty anymore and would like to fix it myself.
Please help me understand what is going onRESOLUTION:
I erase the drive completely following the security measure "Zero Out Data" and then reformat the drive. According to what I read, by following the zero out data procedure, the computer checks the drive and isolates possible structural errors in the disk ( don´t know if it is true) I had everything already backup through Windows as explained originally.
After I reformat the drive everything is working OK. I have done the tests again (Disk Utility and Disk Warrior) that showed the drive to be in perfect order. So probably the error was caused by lack of sufficient free space in the disk ( 30 highly fragmented GB for a 1TB computer) that made OS X incapable of handling new information and was deleting key elements (?) in short a fragmented and saturated disk. However still do not understand why most tests could not complete or showed info relating to structural damage and now the same tests are saying everything is OK...
So if anyone goes through something similar, try erasing and formatting the drive, see how it goes.
Thank you very much baltwo! -
I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.
Snow Leopard OS 10.6 is not available via Software Update, it is paid upgrade.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/ -
PL/SQL Block working fine but same code procedure is giving error.
Hi Experts,
I am executing procedure getting error ORA-27486: insufficient privileges
If It's PL/SQL block it's creating job classes.
Both the cases same user.
CREATE OR REPLACE PROCEDURE JOB_CLASS_PROC
AS
V_SQL VARCHAR2 (4000);
V_JOB_STEP VARCHAR2 (50);
BEGIN
-- Create Job Class if not exist
BEGIN
FOR i
IN (SELECT SNS.OWNER_NAME OWNER_NAME,
VDB.NAME
SNAME
FROM SCHEMA_NAMES SNS,
V$DATABASE VDB
WHERE OWNER_NAME NOT IN ('')
AND (OWNER_NAME || '_JOB_CLASS')
NOT IN
(SELECT JOB_CLASS_NAME FROM DBA_SCHEDULER_JOB_CLASSES))
LOOP
V_SQL :=
'BEGIN
DBMS_SCHEDULER.CREATE_JOB_CLASS
job_class_name => ''' || i.owner_name || '_JOB_CLASS'',
service => ''' || i.SNAME || ''',
comments => ''Job class for ' || i.owner_name || '''
EXCEPTION
WHEN OTHERS THEN
RAISE;
END;';
EXECUTE IMMEDIATE V_SQL;
END LOOP;
END;
EXCEPTION
WHEN OTHERS
THEN
RAISE_APPLICATION_ERROR(-20001, V_JOB_STEP||' SQLERRM: ' || SQLERRM || ' SQLCODE: '|| SQLCODE);
END JOB_CLASS_PROC;
DECLARE
V_SQL VARCHAR2 (4000);
V_JOB_STEP VARCHAR2 (50);
BEGIN
-- Create Job Class if not exist
BEGIN
FOR i
IN (SELECT SNS.OWNER_NAME OWNER_NAME,
VDB.NAME
SNAME
FROM SCHEMA_NAMES SNS,
V$DATABASE VDB
WHERE OWNER_NAME NOT IN ('')
AND (OWNER_NAME || '_JOB_CLASS')
NOT IN
(SELECT JOB_CLASS_NAME FROM DBA_SCHEDULER_JOB_CLASSES))
LOOP
V_SQL :=
'BEGIN
DBMS_SCHEDULER.CREATE_JOB_CLASS
job_class_name => ''' || i.owner_name || '_JOB_CLASS'',
service => ''' || i.SNAME || ''',
comments => ''Job class for ' || i.owner_name || '''
EXCEPTION
WHEN OTHERS THEN
RAISE;
END;';
EXECUTE IMMEDIATE V_SQL;
END LOOP;
END;
EXCEPTION
WHEN OTHERS
THEN
RAISE_APPLICATION_ERROR(-20001, V_JOB_STEP||' SQLERRM: ' || SQLERRM || ' SQLCODE: '|| SQLCODE);
END;
Why for same code procedure is giving error.
Please help me.
Thanks.Hi,
Then with the same grants how the below script is working.
If I put the below same script in Procedure it's not working.
DECLARE
V_SQL VARCHAR2 (4000);
V_JOB_STEP VARCHAR2 (50);
BEGIN
-- Create Job Class if not exist
BEGIN
FOR i
IN (SELECT SNS.OWNER_NAME OWNER_NAME,
VDB.NAME
SNAME
FROM SCHEMA_NAMES SNS,
V$DATABASE VDB
WHERE OWNER_NAME NOT IN ('')
AND (OWNER_NAME || '_JOB_CLASS')
NOT IN
(SELECT JOB_CLASS_NAME FROM DBA_SCHEDULER_JOB_CLASSES))
LOOP
V_SQL :=
'BEGIN
DBMS_SCHEDULER.CREATE_JOB_CLASS
job_class_name => ''' || i.owner_name || '_JOB_CLASS'',
service => ''' || i.SNAME || ''',
comments => ''Job class for ' || i.owner_name || '''
EXCEPTION
WHEN OTHERS THEN
RAISE;
END;';
EXECUTE IMMEDIATE V_SQL;
END LOOP;
END;
EXCEPTION
WHEN OTHERS
THEN
RAISE_APPLICATION_ERROR(-20001, V_JOB_STEP||' SQLERRM: ' || SQLERRM || ' SQLCODE: '|| SQLCODE);
END;
Please help me.
Thanks. -
Linked Server to Access Database in SQL Server 2012 is working perfectly.But, All of sudden it is showing SQL Error Code:7303
Unable to connect to the database type that is created with earlier versions type. But the same Linked Server in another SQL Server instance is working perfectly. I am unable to rectify what is the problem please help.All of sudden it is showing SQL Error Code:7303
Error 7303 = "Cannot initialize the data source object of OLE DB provider "%ls" for linked server "%ls"."?
Check the data Provider on the machine, e.g. using ODBC Admin by creating a DSN
Olaf Helper
Hi Olaf Helper,
I don't now how to add a DSN for the Access Database using ODBC Admin. Can you Please help me with that one. as the solution to above problem i Have added a startup parameter -g512 to SQL Server is it effects my existing Assemblies in SQL Server. I am replacing
the startup parameter as -g500 to -g512 here.
Thank you
Regards,
AyubKhan M -
I tried to sync my iphone4 to my pc (not mac) and the following message went out: I tunescould not back up the iphone because an error occurred I restore my phone but nothing happened. What shall I do? (my ipad is working perfectly when i sync it)
I dont know why this happens.Unfortunately, "because and error occured" doesn't give you much to go on. Some general things I would try if you haven't already:
Use Disk Utility on your mac to repair disk permissions, then reboot and try backing up again.
Use Finder to go to ~/Library/Application Support/MobileSync/, then control-click on the Backup folder and select Get Info, then check Sharing & Permissions at the bottom and make sure your username has read & write priviledges
Try closing all apps, then reset your phone: double-tap the home button, tap and hold the apps at the bottom until they wiggle, tap the minus sign on all apps to close them. Then reset your phone: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), and release
Try a different usb to dock connector cable; ensure that your case isn't interfering with a good connection to the dock connector at the bottom of your phone; clean the dock connector at the bottom of your phone (e.g., with a dry toothbrush); troubleshoot your usb connection (http://support.apple.com/kb/TS1286)
I know this looks like a laundry list, but unfortunately it's hard to isolate the problem without a clear error message. If the problem persists, you might try posting in the iMac or iTunes forums for other ideas. -
Last night iTunes on my PC tried to run an update. Prior to the update, it was working perfectly. At the end of the update I got an error message R6034, an application has made an attempt to load the C runtime Library incorrectly. Any suggestions? I have also gotten a message that iTunes is not installed correctly, to reinstall. Reinstalling give the the same two errors over and over. Restarting my computer does nt help.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I cannot sign in my facetime in my macbook. It just keep saying "The server encountered an error processing registration. Please try again later." But when i try log in to my ipad it work perfectly fine.
You may get better detailed results by asking in the Facetime forum.
Maybe you are looking for
-
Why can't I download large files on Windows 7 in Bootcamp?
I am running Bootcamp on a New iMac running Lion. Everything on the Apple side of my partition works brilliantly. I need Windows to run some old programs which are not available to Mac. I successfully loaded Windows 7 on Bootcamp after many attempts
-
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window howev
-
My computer (Dell Inspiron laptop running XP pro) is connected to my Palm V by a serial to USB cable. Yesterday my computer crashed. It also turned out that my Palm (sitting in my purse) had run out of battery power and lost all data. 5 hours late
-
Acrobat 9 Preflight Droplet Missing Overview Info from Results
When I open a PDF with Acrobat 9 and run a preflight on it there is an "Overview" displayed in the results. Within this Overview section there is Pages > Page:1 > Page Information and here I can get page size (i.e. Media Box) information. However, wh
-
Launching Enterprise Manager on Win2K
I am hoping to develop against an Oracle 816 or 817 database but setting this up in a Windows 2000 environment I find I cannot launch Enterprise Manager. I get an error: VTK 1000 even though I use the default user/password sysman/oem_temp. I then tri