Bapi automatically picks configuration determined vales

I have recorded a bdc for mb11.
we are providing doc date posting date ,mvt type, plant, storage loc,
when we enter the material and quantity and press enter the system automatically
populated business area, cost centre and profit centre.and now i saved it.
I used the same in the program and it is working fine ie creating a material document with bdc.
Now i want to do with BAPI for mvttype 976.
1)Do we need to input the business area, cost centre and profit centre to the bapi or system will automatically take care ?
2)
BAPI_GOODSMVT_CREATE is this the bapi to create the material doc for all the mvt types which uses mb11 tcode?

Hi,
you should read documentation for this BAPI in SE37. It lsits all allowed cases where you can use this BAPI as well as all paramters required for each case.
Cheers

Similar Messages

  • Automatic picking in del.

    how can i set automatic picking quantaty in delivery

    Hi,
    If you wish to use the pick-and-pack functions for a storage location without HU management, you must configure the following setting in Customizing for Warehouse Management.
    Set the indicator pick/pack for the respective warehouse number in which you wish to work with pick HUs. Use the workstep Interfaces ® Shipping ® Define Shipping Control ® Shipping Control per Warehouse Number.
    If you are working with Handling Unit Management, you do not need to set the indicator for pick/pack. If you wish to automatically create pick HUs during TO creation, you must configure the following setting in Customizing for Handling Unit Management:
    Create an entry for any combination of warehouse number, source storage type, destination storage type, and movement type, enter a packaging material, and set the indicator for Automatic Creation of a Pick HU . Use the workstep Control for Automatic Pick-HU Creation.
    In the Implementation Guide (IMG), you can set for the creation of pick HUs which  packaging material the system should propose for picking. You can set the following packing proposals for any combination of warehouse number, source storage type, destination storage type, and movement type:
    Automatic creation of pick HUs for creation of a transfer order
    The system automatically creates a pick HU with the specified packaging material during creation of a transfer order and assigns the pick HU to this transfer order.
    Automatic determination of packaging materials during creation of a transfer order
    The system does not create any pick HUs, but uses the specified packaging material as information and copies this, for example to an IDoc, for the creation of a transfer order. If this IDoc is sent to another system, the receiving system can create a pick HU using this proposal. This ensures for the verification that the picked materials can also be packed into this handling unit.
    Manual creation of pick HUs and assignment to a transfer order
    The system does not create any pick HUs, nor does it determine a packaging material. You can create the pick HUs manually and assign these then to a transfer order.
    You wish to define that in a certain storage type (for example, fixed bin warehouse) Europallets will always be used for picking. In Customizing, you then set automatic creation of pick HUs and the use of the packaging material Europallet for this storage type. In another storage type, for example, the packaging changes frequently, and you decide there that the pick HU is to be created manually.
    Sail

  • Does ipod nano automatically pick up new purchases when I plug it in to the computer?

    When I bring new music into my itunes library the song is checked.  will the nano automatically pick up new purchases when I plug it in again?  Or do I have to start over?  I hit sync again but not sure whether I have to do that every time I charge it.

    Depends on how you have your iPod set up to Sync.  For example if your iPod is configured to sync only checked songs and videos, make sure each new track you add to iTunes has a tick mark next to it.  The next time you sync your iPod (assuming it set up to automatically sync), the new tracks will be added.
    B-rock

  • Different storage location automatically pick for same material code

    Hi,
    As per my requirement,
    We have two storage locations i.e Return Location and Finished Location and single plant and single shipping point.
    At the time of Normal delivery system should be automatic picked Finished Location and return delivery system have to pick Return Location only.
    I tried to do Storage location determination but system is not picking correct location. Kindly guide me.
    Thank You!
    Chakradhara

    Check this thread
    Creation of return order with ref to an Invoice
    G. Lakshmipathi

  • Automatic customer account determination for EBS

    Dear all,
    I'm configuring Electronic Bank Statement. Could you please explain, how can I setup automatic customer account determination for incoming receipts? Based on what information these accounts should be determined? Where to configure it?
    Thanks in advance.

    Hi,
    If your configuration is correct, an accounting document will get created during invoice creation even if the value is zero. Acct doc is created not based on the value, but based on the account key to which the condition type is linked.
    Generally in free goods, there will be net price (gross price- discounts). You can link this netprice condition type to an account key. The netprice will anyway be nullified by NB00 condition type which is applicable for free goods pricing. You can also link NB00 to another account key.
    Now the values will nullify each other in invoice. Similarly the values will be nullified in accountnig doc also and they can be posted to any GL account you wish.

  • Automatic picking in the delivery

    Hi All,
    How automatic picking is done in the delivery document. I am creating delivery document with reference to purchase order then I am entering picking quantity manually and performing PGI. I want picking quantity should be equal to delivery quantity and that should be picked autoatically. Please note,  in this case there is no warehouse is involved ( Transfer order is not required).
    Thanks,

    I got answer for my quetion:
    See OSS Note 401159 re: old "SD Picking" functionality (to which EK00 belongs) and new Lean WM / full WM functionality (to which TO's/transfer orders belong).
    If you use WM, and TO's, then yes, the Delivery output WMTA can be used to automatically generate a TO for a delivery. Then, separately in WM configuration you would configure a pick list output of some kind that is triggered by the TO.
    If you use "SD Picking" then you need to trigger a Picking output (as opposed to a Delivery output) to get a printed picklist. EK00 is the standard picking output type for a picklist for a single delivery. In transaction VP01SHP, to maintain the print parameters for EK00, go to the "Shipping (Spec.case)" group/paragraph.

  • How does system automatically picks up document type when you enter INV?

    1.How does system automatically picks up document type when you enter Invoice?
    2.What is Algorithms? Where is it used?
    3.What is the use of Customer Ledger Inquiry?

    The document type is hard coded by the system. Look at UDC table 00/DT for the document types in your system. Notice that some of those are marked as hard coded/reserved by JDE. You may wish to dowload the Accounts Receivable manual and read that to learn more about the document types.
    Not sure what you mean by algorithm, unless you are looking for how the system determines what document type to assign on invoice entry.
    These comments apply to accounts receivable and to JDE World, since you posted in the JDE World forum and are talking about the customer ledger inquiry. If you are in Enterprise One and asking about Accounts Payable, then this reply can be ignored (though Enterprise One works pretty similar to World in this respect).
    What is the use of the Customer Ledger Inquiry. To view accounts receivable detail history for a given customer, viewing on line. Whomever works in the accounts receivable department will likely use the Customer Ledger Inquiry quite a bit.
    Hope this helps a bit.
    John Dickey

  • Automatic Picking giving error while saving the Delivery

    Hi
    We have done the configuration for doing automatic picking while saving the delivery.
    Steps done are
    1. TCode V/38
    2. TCode OVLT  where we have changed the Time value form 3 to 4 for  Send Immediate
    3. TCode VP01SHP where all shipping points are maintained.
    we are getting the following error while saving the delivery.

    Execute ST22 and go through the explanation given under the tab "Error analysis" and "How to correct the error".  Ask your ABAP team to look into this if you are not able to find out the root cause of the issue.
    G. Lakshmipathi

  • Automatic storage location determination based on delivery document type

    Dear All,
    How can automatic storage location will be determined based on sales order type or delivery type.
    Ex: If the business sells the material storage location automatically determined as SL12.
    If the customer returnns the material storage location should be SL01.
    Please suggest for retun process automatic storage location determination.
    Best regards,
    Ramesh

    Dear Guru Lakshmipathy,
    Fine, but we have some picking rules are MALA, RETA and MARE.
    Currently we have onle on plant 1010 and shipping point 1010.
    storage location for outbound deliveries determined based on MALA rule has been assigned to LF.
    can we use RETA or MARE to determine the storage location for returns delivery.  If yes kindly
    explain. And where is storage condtion available in sap.
    Best regards,
    Thanks

  • Are all RFCs and BAPIs automatically exposed as web services?

    Hello,
    Our product helps business users exchange data with SAP. We use standard RFCs and BAPIs to communicate with SAP. This is a .NET application although my question is not specific to .NET.
    It seems SAP obsolete their .NET connector in near future. The emphasis is on web services. This is a great move. We can simply drop using the .NET connector and start using the web services. However, I have a few doubts:
    1. RFCs and BAPIs are automatically exposed for remoting. When the customer installs our application, it just works out of the box. Customers do not have to make any configuration changes to SAP to expose RFCs and BAPIs.
    In the new world, are all RFCs and BAPIs automatically exposed as web services or one has to go through each RFC/BAPI and expose it explicitly?
    2. Is there a comprehensive WSDL schema available anywhere for all the RFCs/BAPIs?
    3. Are there any other web services (besides RFCs/BAPIs) that SAP Netweaver exposes? Where can I get more information?
    Thank you in advance for your help.
    Regards,
    Pradeep

    Darryl,
    Thank you for your help or at least trying to help me. However, you left me with more questions than answers:-(.
    1. "Old" does not mean "bad."  Each RFC/BAPI serves a specific function. If some RFC is being obsoleted, there must be a replacement documented somewhere. Is there one?
    2. I can look into SE80 (and other transactions) to see what is exposed. However, what I need to understand is what is SAP's stance on exposing standard web services.
    Can others please share your thoughts?
    Regards,
    Pradeep

  • How to Update picking qunatity while Automatic picking is active

    Hello All,
    I have a requirment of updating the Delivery pick quantity.
    I am updating the it through BAPI,
    Is there any other way of updating picked qunatity in case automatic picking is active.
    Please suggest
    regards,
    SNB

    Hello,
    Please look into below thread links for the same issue:
    Updating Picking Quantity using VL02N ?
    how to update picked qty as delivery qty while creating outbound delivery
    Hope the information is useful
    Regards,

  • BAPI for Free Goods determination

    Hi Folks,
    Can anybody help me providing the BAPI for "Free Goods determination" in MM.
    I checked the BAPI_FREEGOODS_CONDITIONS; but I would like to know the BAPI which triggers the free goods determination while creating PO.
    For eg I hv  condition records in MBN1 and it triggers free goods in PO.
    Points for sure
    Thanks

    Hi
    check the BAPIs
    BAPI_FREEGOODS_CONDITIONS    
    CND_FREEGOODS_CALL_BAPI      
    CND_FREEGOODS_DEL_AFTER_INIT 
    CND_FREEGOODS_MAP_BAPIMTCS   
    if doesn't serve the purpose do it by BDC method
    Regards
    Anji

  • Automatic Proxy Configuration URL doesn't work on some computers, but Manual proxy can work

    It seems that the Automatic Proxy Configuration URL doesn't work, I use the command netstat -a, can't see the connection to proxy server, but manual proxy is ok, and I tested on some others computers, most of these computers can work normally with Automatic Proxy Configuration URL.
    For the computer can't work normally with Automatic Proxy Configuration URL, I did below actions
    1.Clear the cache
    2.update the version of firefox
    3.reinstall the firefox
    4.use the safemode to run firefox
    but unfortunately, still doesn't work.
    Can some dear friends give me a big favor for this? Thanks a million in advance!

    I have the same problem, just showed up recently - very fricking annoying!!

  • Automatic picked up purchase order during shipment cost cal

    Hi,
    We have one issue system picked up automatically Purchase order which having account assignment category "U".We have config new account assignment category "I" for some specific reason.Now we want that during shipment cost calculation (VI01) system automatically picked up purchase order with having account assignment category "I" intead of u.
    Please guide.
    Regards'
    Kumar

    Dear Arif,
    Please check the shipment document is there any error log exists
    Check the shipment cost having the value and Transporter(Vendor) and it is getting transfer to FI.
    After checking the transfer chek sytem will create the PO while saving the shipment cost document.
    I hope it will help you,
    Regards,
    Murali.

  • BAPI for Picking and Post Goods Issue ?

    Hi All,
    Is there any BAPI for doing Picking and Post Goods Issue in VL02N ? I don't think we can use BAPI_OUTB_DELIVERY_CHANGE.
    Is it advisable to use BAPI or BDC ( if no BAPI exist ).  Thanks in Advance.

    BAPI for picking in VL02N
    BAPI_OUTB_DELIVERY_SAVEREPLICA
    BAPI for posting Goods Issue
    BAPI_OUTB_DELIVERY_CONFIRM_DEC
    For reference: http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/LEIDW/LEIDW.pdf

Maybe you are looking for

  • Laptop stolen - how do I import the music on my ipod to the itunes on my new laptop?

    Title pretty much says it all. My laptop was stolen and I've now got a new one. I've installed itunes and I've logged into my itunes account. When I try to sync my ipod to my new itunes it won't let me - it only gives me the option of erasing all the

  • Slideshow in Photoshop Elements 9 keeps crashing when I try to output it to movie file (wmv)

    Made a slideshow using Photoshop Elements 9 that keeps crashing when I try to output it to movie file (wmv). This message appear: Microsoft Visual C++ Runtime Error This is totally new to me as I have made a few slidshows before and saved them into w

  • F-22,f-43 tables

    Hi all, I need some information regarding “Customer and Vendor Invoices ” 1.     Can any one please help me what are all the tables that update when we post customer and vendor invoice with F-22 and F-43. please give me all relevant information,. I w

  • How to change remote_login_passwordfile from exclusive to NONE?

    Hi all, I used dbca to create a database in linux server. then created an ops$oracle user using the below SQL: create user ops$oracle identified by externally; grant dba to ops$oracle; How can i change this parameter to NONE? Thanks

  • Problems exporting to Windows Media file

    Hello, I don't know why, but when I export movies as WMV files, I am only able to do a few seconds of it (30 seconds to 35 seconds) . Any one know why I am not able to export the entire movie? I did not install it on this computer, but I believe it's