BAPI BAPI_MTRREADDOC_UPLOAD. Unable to identify device to upload MR result

Hi experts,
We have a scenario where several info records may have same serial number and device category. However, for a given installation we have a unique info records installed for a given serial number/device category.
When I try to upload a MR result using bapi BAPI_MTRREADDOC_UPLOAD I get an error saying
"Device xxxxx is allocated to several device cats and therefore not unique". That's strange for my point of view since other info records with that serial number are not even billing related installed in the system.
Does anyone know an alternative way of uploading a MR result for a given installation/PoD?
Thanks in advance.

Hi, thaks for your answer.
Unfortunately we don't generate MRO in advance so we can't make use of them
This bapi doesn't have the equipment as an input parameter neither. Below are input parameters. I gues my only chance is trying to find another bapi. If any one knows any other bapi please, let me know.
Thanks again!
Input parameters:
MATERIAL
SERIALNO
REGISTER
MRREASON
MRIDNUMBER
READINGRESULT
METERREADINGNOTE
ACTUALCUSTOMERMRTYPE
METERREADER
MRDATEFORBILLING
MRTIMEFORBILLING
ACTUALMRDATE
ACTUALMRTIME
MRDATEOFMAXIMUM
MRTIMEOFMAXIMUM
SMORDER
ACTIVE
REFNUMBER
TARGETMRDATE
EXT_UI
MRDATEFORIDENTIF

Similar Messages

Troubleshooting 6th gen ipod nano "unable to identify ipod"

Just this evening I plugged my ipod in to my laptop and I continually recieve the message that says something along the lines of "unable to identify ipod". I ran through the trouble shooting tips on the support website, including new usb port, restart, uninstall-reinstall, and turning off my anti-virus. Is there something else I can do to get my computer to recognize my device? Thanks in advance for your replies.

Your problem is completely different from the original post. The OP could not run the correct version of iTunes on their older computer. You're much more likely to get the help you need by starting your own thread with a properly descriptive subject line.
If you need instructions on how to start a new thread, see this link:
http://discussions.apple.com/ann.jspa?annID=650
Best of luck.

Unable to use SCAT to upload material master in ECC 6

HI
I am unable to use SCAT to upload material master in ECC 6,
an error is triggering
"Releases higher than 6.40 are not permitted
Message no. TT005
Diagnosis
With Web Application Server Release 6.40, you cannot create new automated CATT test cases. However, you can create manual CATT test cases"
canany body please help me to use SCAT
Sreeram

you have to read yourself:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
I certainly do not use SCAT or SECATT to load master data, especially not material master.
A material master has dynamic screens, based on the material type the view selection will be different, based on entries made in MRP view fields become hidden or mandatory. Such things canot be done with a static recording.
SAP provides batch input programs and BAPIs for material master load and additonally loading per IDOC in LSMW (which offers as well batch input and Bapi methods)

Sorry we've been unable to identify this hotspot

This error within this app has been going on for years, and it's still not sorted
I've got my laptop connected to my a BT Wifi Fon connection.
Right next to it, I've got my Android Tab, again picking up the Fon signal,
Right next to that I've got my phone, that gives me the error message:
"sorry we've been unable to identify this hotspot"
At other times the phone will connect but not the tab, and again on other days the Android devices connect, but not the laptop.
Frustratingly, some days i have absolutely no problems connecting at all.
PS, this all takes place in the same location,

BTWifi- Fon hotspots are not guaranteed to work. This is because they are dependant on the owner of the hotspot to have their Homehub turned on. It is also possible that the owner of the hotspot is using the available bandwidth and as it is their Homehub they have precedence over other users.
It could also be that the Homehub is needing a reset. That is up to the owner of the hotspot who is under no obligation to do that and it can not be done by BT.

Unable to identify the exchange protocol of the message (sync AS2 MDN)

Hi,
We got the following error:
Description: Unable to identify the exchange protocol of the message
StackTrace:
Error -: AIP-50080: Exchange protocol identification error
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1367)
     at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2370)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1813)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1152)
     at oracle.tip.adapter.b2b.xmlgwIntg.XMLGWIntegration.raiseOutboundMessage(XMLGWIntegration.java:168)
     at oracle.tip.adapter.b2b.xmlgwIntg.Outbound.onMessage(Outbound.java:297)
     at oracle.jms.AQjmsListenerWorker.dispatchOneMsg(AQjmsListenerWorker.java:316)
     at oracle.jms.AQjmsListenerWorker.run(AQjmsListenerWorker.java:129)
     at java.lang.Thread.run(Thread.java:534)
Here is the Wire message (sync MDN)
=======================
Message-ID=<23033756.391232032071968.JavaMail.SYSTEM@INUBITTEST>
Subject=Your ORDERS AS2
[email protected]
Content-Length=1347
MIME-Version=1.0
Server=Apache
Date=Thu, 15 Jan 2009 15:07:52 GMT
Content-Type=multipart/mixed;      boundary="----=_Part_53998_23619909.1232032071968"
[email protected]
------=_Part_53998_23619909.1232032071968
Content-Type: text/plain; charset=UTF-8; name=test.txt
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=test.txt
Message-ID: <17080722.371232032071906.JavaMail.SYSTEM@INUBITTEST>
MIME-Version: 1.0
Content-Type: multipart/report; report-type=disposition-notification;
     boundary="----=_Part_53997_14786767.1232032071906"
AS2-Version: 1.1
AS2-From: test_AS2
AS2-To: as2me
------=_Part_53997_14786767.1232032071906
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
MDN for Message ID: <33156:4:0:137@as2me>
From: as2me
To: test_AS2
Received on: Thu, 15 Jan 2009 16:07:51 +0100
Status: processed
Comment: This is not a guarantee that the message has
been completely processed or unterstood.
------=_Part_53997_14786767.1232032071906
Content-Type: message/disposition-notification
Content-Transfer-Encoding: 7bit
Reporting-UA: inubit Integration Server
Original-Recipient: rfc822; test_AS2
Final-Recipient: rfc822; test_AS2
Original-Message-ID: <33156:4:0:137@as2me>
Disposition: automatic-action/MDN-sent-automatically; processed
Received-Content-MIC: 5kFOLMXOUurpm6DUTA8IMRj5gcs=, sha1
------=_Part_53997_14786767.1232032071906--
------=_Part_53998_23619909.1232032071968--
============================
The communication with our TP is going well, we are able to send, receive messages over AS2 and send back MDN, but we are not able
to receive their MDN.
Edit:
It seems that after the latest MLR patch, the error changed to [IPT_HttpSendError] HTTP encounters send error :. Premature EOF encounter but the roots seem to lead to the problem with MDN as B2B is sending the message a couple of times now and gives the mentioned EOF error.
Please advise,
Thank you
Edited by: Kamil Zadora on Jan 30, 2009 3:44 AM

Hi Ramesh,
Yes, agreement uses AS2 IDentifiers. Incoming messages are recognized correctly, and we send back sync MDN that is correctly received by our TP. They also recieve our messages correctly although Oracle B2B does not recognize the MDN from them. I think that this causes that, now after applying the latest MLR patch, B2B tries to send it around 6 times and gives the Unexpected EOF error.
Thank you for your help in advance,
Kind regards,

Unable to install Device CALs on Windows Server 2012 after OS Reinstall

Due to a hardware fault we had to reinstall Windows Server 2012. I have activated the Terminal Services licensing Server but I am unable to install Device CALs that we have purchased.
The error is as follows:
"Remote Desktop Services Licensing is unable to process your request. Make sure you provided correct information. If the problem persists, try other methods of activation. Error code is 800"
I tried contacting technical support over phone - they are also unable to resolve the issue.

Hi, thanks for response.
I contacted Clearing House over phone and provided them with all the details regarding authorization
number(s), license number(s) et al. However they also mentioned that there is some technical error from their "tool" and directed me to Technet Forum.
I shall try the Hotfix

Asmtool: Unable to clear device

I need some help with this problem. I saw that another user posted a similar issue back in February, but there were no replies to that posting -
We are installing oracle 10gR2 in RHEL4, and we have decided to use oracle Automatic Storage Management feature. We have loaded OCFS2 first to store the Clusterware files and now we are trying to load the ASMLib files. The OCFS2 setup went well and the ASMLib install was proceeding when we received the following error -
# /etc/init.d/oracleasm createdisk VOL1 /dev/sda2
Marking disk "/dev/sda2" as an ASM disk: asmtool: Unable to clear device "/dev/sda2" [FAILED]
Now, /dev/sda2 is a 50Gb partition taken from disk space on 3 servers, not an independent physical disk. When I googled the net I came across the earlier posting but found no resolution. Any help you can provide would be appreciated!
Michele
([email protected])

raw devices set up ?

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any su

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any suggestions?
MacBook Air, OS X Mountain Lion (10.9.1)

Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

QTP unable to identify objects in a flex application

Hi,
I am having an application that runs on flex 3.6 SDK. I am trying to automate the same using QTP 10.0, but, I am unable to identify the objects. I have installed the Flex 4.5 add-in, but still unable to recognize objects.
Upon browsing some forums, i found that I need to compile the files "automation.swc, automation_agent.swc, automation_dmv.swc, qtp.swc, automation_flashflexkit.swc" by including them in <include-libraries> ...</include-libraries> tags in "flex-config.xml" file present under "C:\Program Files\Adobe\Flex Builder 3 Plug-in\sdks\3.6.0\frameworks". We did that, but still, not able to identify objects.
It would be of great help to me if any some one could tell if I am missing out anything ?

hello,
not only need the objects be enclosed by their parent frame, but they also need to be "on top of it" ... meaning if you imagine your report layout as a set of layers that you look at from the side, your "layout surface" would be the bottom most layer and then all objects would be layered on top of each other. in this view, only objects that are in layers above a particular frame can become its children. after that the relationship is determined whether or not an object is inside a frame or not.
you might want to check your object navigator to see whether or not the particular objects are actually in the right place in the hierarchy.
thanks,
ph.

Siebel database Configuration wizard unable to identify index tablespace

Hi,
I'm installing Siebel CRM 8.1.1 on AIX platform. We have RAC enabled database at backend and in that two tablespace has been created, one for data and another one for index. Now in the database configuration wizrd where we have to provide the name of both tablespaces; we provide the name of data tablespae in the Table Tablespace filed and index tablespace in the index tablespace filed of the configuration wizard. Now when we click on the next button. The configuration wizrd gives error of unable to identify index tablespace.
Why is this happening as index tablespace is properly created in the database. Please help me in this. You quick respance will be highly appriciated.
Regards,
Abbasi

I thought it might be. grantuser.sql generally needs to be modified to suit the underlying database configuration. Glad you got it working.

Why Unable to identify a user for 802.1X authentication (0x50001)?

Hello,
We are trying to set up wifi single-sign-on. When logging to a laptop get a message
"Connecting to Pivot_Users" and after some time "Unable to connect to Pivot_Users" and after that we are logged in to a laptop and successfully connected to Pivot_Users wifi network.
Server: windows server 2003 (with all updates)
laptop: windows 7 professional SP1 (with all updates)
When looking to event log i found this error:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2012-10-10 10:38:01
Event ID:      5632
Task Category: Other Logon/Logoff Events
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      sba01-nb
Description:
A request was made to authenticate to a wireless network.
Subject:
Security ID:
Account Name:                -
Account Domain:                -
Logon ID:                0x0
Network Information:
Name (SSID):                Pivot_Users
Interface GUID:                {64773f24-bf8b-4e91-bbd7-eb199e3c2c5e}
Local MAC Address:        C4:85:08:12:77:44
Peer MAC Address:        00:24:97:83:8E:61
Additional Information:
Reason Code:                Unable to identify a user for 802.1X authentication (0x50001)
Error Code:                0x525
EAP Reason Code:        0x0
EAP Root Cause String:
EAP Error Code:                0x0
Event Xml:
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>5632</EventID>
    <Version>1</Version>
    <Level>0</Level>
    <Task>12551</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2012-10-10T07:38:01.093305500Z" />
    <EventRecordID>37791</EventRecordID>
    <Correlation />
    <Execution ProcessID="760" ThreadID="2224" />
    <Channel>Security</Channel>
    <Computer>sba01-nb</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SSID">Pivot_Users</Data>
    <Data Name="Identity">
    </Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="PeerMac">00:24:97:83:8E:61</Data>
    <Data Name="LocalMac">C4:85:08:12:77:44</Data>
    <Data Name="IntfGuid">{64773F24-BF8B-4E91-BBD7-EB199E3C2C5E}</Data>
    <Data Name="ReasonCode">0x50001</Data>
    <Data Name="ReasonText">Unable to identify a user for 802.1X authentication</Data>
    <Data Name="ErrorCode">0x525</Data>
    <Data Name="EAPReasonCode">0x0</Data>
   <Data Name="EapRootCauseString">
    </Data>
    <Data Name="EAPErrorCode">0x0</Data>
</EventData>
</Event>
Thank you for answer and help.
Regards,
Tadas

Hi,
Thanks for your post.
Have you configured the client to only use user authentication for 802.1X? If so, I would like to inform you that this is expected when you configure the 802.1X to user only authentication.
Here is the process that is followed.
1. As soon as client is connected to the network the Authenticator (switch) periodically sends EAP request packet/frame to the client/supplicant.
2. The client has to respond back with an identify and if its configured only for User authentication then it will send blank identity.
3. The Authenticator cannot validate and the authentication would fail.
4. Windows client is configured for a block time of 20 min. So, once the authentication fails the NIC card will go in block time for 20 min until there is a change in credentials. So, even if the authenticatior(swithch) is periodically sending EAP request
it will just ignore them
5. You will see event 15506 after the event 15514.
Here’s the technet that you we can refer for the reason code : Reason: 0x50001 that we see in the event 15514
http://technet.microsoft.com/en-us/library/cc727747(WS.10).aspx
0x50001 = Dec 327681
Reason code: 327681   Event log message: The 802.1X module was unable to identify a set of credentials to be used. [An example is when the authentication mode is set to “User” but no user is logged on.]   # def name:
ONEX_UNABLE_TO_IDENTIFY_USER
Best Regards,
Aiden
Aiden Cao
TechNet Community Support

Codedui: Unable To Identify Objects Inside The Virtual Machine

Hi
We are unable to identify objects inside the virtual machine. We want to perform some tasks inside the virtual machine. The virtual machine object is getting identified as image. So when we perform tasks like creating a folder or opening any application
inside that virtual machine, all actions are recorded as image.Need help on this ASAP.
Thanks

Hi Haripriya78,
Thank you for posting in MSDN forum.
>>Codedui: Unable To Identify Objects Inside The Virtual Machine
Based on your issue, could you please tell me what operation you do and then get the error message?
Whether you record and run this coded UI test and then get the error message?
If possible, please tell me more detailed message about this issue.
Generally, I know that if you want to identify objects for coded UI test, I know that the
recorder needs to be present in the machine on which you are trying to record actions.
For more information, please refer the Vinoth's suggestion to check this issue.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1b7a328d-a9b6-48a6-9cb9-8ff8ac7dd435/codedui-unable-to-identify-objects-inside-the-virtual-machine?forum=vsautotest
If I misunderstanding your issue, please tell me more message about your issue so that we will further help you support this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error in X11 (unable to start device PNG)

Hello.
I have a problem with running embedded R script.
First script runs fine:
begin
sys.rqScriptCreate('Example1',
'function() {
ID <- 1:10
res <- data.frame(ID = ID, RES = ID / 100)
res}');
end;
The second one is not so fine:
select *
from table(rqEval(NULL,
'select 1 id, 1 res from dual',
'Example1'));
ORA-29400: data cartridge error
Error in X11(paste("png::", filename, sep = ""), width, height, pointsize, :
unable to start device PNG
ORA-06512: на "RQSYS.RQEVALIMPL", line 57
29400. 00000 - "data cartridge error\n%s"
Can anyone help me?
Thanks.

SELECT PVALUE
FROM TABLE(rqEval(
CURSOR(SELECT 1 "ore.connect", 0 "ore.graphics" FROM DUAL),
'select 1 pValue from dual',
'RF_TTEST_PVALUES'));Hi,
Thats is very good. Is it a way to do it in R client to avoid following error?
Example:
ORE> library(ORE)
ORE> ore.connect(user="rquser", password="pass", sid="TEST", host="r2151", port=1525, all=TRUE)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
Error in try({ : ORA-20000: RQuery error
Error in X11(paste("png::", filename, sep = ""), g$width, g$height, pointsize, :
unable to start device PNG
ORA-06512: at "RQSYS.RQEVALIMPL", line 104
ORA-06512: at "RQSYS.RQEVALIMPL", line 101
Regards,
Max

I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1. I am unable to rename/number devices. How can I get rid of this error message.

I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1. I am unable to rename/number devices. How can I get rid of this error message.

I've just seen this message for the first time and it's showing on 10 devices.
What I really love about Apple Configurator is the copious amount of context driven help offered to you.
"Unable to send ClearPasscode command to device.
The device was disconnected.
Check the USB connection to the device."

Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!

Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!

Hello Smile_333
The article below will assist with finding things and help increase the hard drive space for your computer. The best way is to have an external hard drive to copy things to if you do not want to delete and loose things.
OS X Mountain Lion: Increase disk space
http://support.apple.com/kb/PH10677
Thanks for using Apple Support Communities.
Regards,
-Norm G.

BAPI BAPI_MTRREADDOC_UPLOAD. Unable to identify device to upload MR result

Similar Messages

Maybe you are looking for