BAPI/FM for forced Inspection completion

Hello,
I have a requirement to build a report for automating Mass UD of inspection lots. When users close the PO they are stuck if the ILs are open, hence the requirement. I have built the report for mass UD and used BAPI_INSPLOT_SETUSAGEDECISION with forced UD indicator set. The issue now is in case of long term inspection characterstics are open for the lot, it doesn't close the IL and status is set as LTIN but in other cases it sets the status to ICCO which automatically closes the lot on forced UD.
Is there a BAPI or approach to force close the IL via the report?
Edited by: bhatia.garima on Jan 12, 2011 11:30 AM

Closing thread -- ref. BAPI/FM/Approach for force Inspection complete via program

Similar Messages

  • Not all physical samples are valuated, force inspection completion?

    Hi
    I have entered results against inspection characteristics but on UD the system gives message "not all physical samples are valuated, do you want force inspection completion?
    What is missing or how can I avoid this message?

    In QE23, Select the inspection lot and check for the physical sample,
    Once you enter both, you will get the screen similiar to QE51 to record result,
    You will see a button for physical sample  which u need to select and do the valuation.
    hope this helps

  • Required Characteristics still open,  want Force inspection completion ?

    Hi
    I entered results using QE51n, saved and on entering UD, the system says "Required Characteristics still open,  Do you want Force inspection completion ?" Though I have entered valuation / characteristics attributes and bold green tick mark appears.
    Please tell me what is missing ?

    Hi,
    In your result record screen select all line item MIC of which you have  taken result & click on icon of lock ( Closed ) finally save it.
    Check & revert me back
    Regards
    SANIL

  • Long text at inspection completion.

    Hi everyone.
    I have following scenario:
    1.- Quality certificate should get variable data when it is printing. User needs to choice from a list, what he will print for certificates, that must be done at Usage decision.
    2.- I think using UD long text at the time to save UD can solve my issue.
    3.- I just can get automatically UD long text when I force inspection completion.
    How can I get automatically UD long text without force inspection completion????
    Regards.

    Hi everyone..
    I think I wasn't clear in my initial request....this is regarding long text for UD....
    Since you force inspection completion in UD (QA11), and save your UD, system automatically show you other screen "Change long text on usage decision", and you can enter any text.
    But that only  happend when you force inspection completion....when you don't force inspection completion, long text can't be updated....
    I need that screen "Change long text on usage decision" appear every time, with or wihout forcing inspection completion...
    I'll really appreciate your support.
    Best Regards.
    Juan.

  • BAPI for Invoice parking & completion

    Hi Friends,
    I want to make a BAPI for LIV park & complete option.
    I found the following :
    BAPI_INCOMINGINVOICE_PARK for Parking.
    BAPI_INCOMINGINVOICE_POST for Invoice Verification: Post Provisional Invoice
    BAPI_INCOMINGINVOICE_CREATE for Invoice Verification: Post Invoice
    When we chk in MIR7 we can do this manually.
    Is there any BAPI for doing this activity thru MIR7.
    Regards
    Sai Krishna

    Hi,
    We can do this by using thre following BAPI:
    BAPI_INCOMINGINVOICE_CHANGE
    change the INVOICE_DOC_STATUS to B , then we can park & complete the doc.
    Regards
    Sai Krishna

  • Bapi to move Quality inspection stock to unrestricted stock

    Hi All,
    I am developing a report where the  material batches should be distributed  to other storage locations within a plant (as we do it in MB1B with movement type 311).But if that material is in QI stock( inspection lots) then that should be forcibly moved to unrestricted stock.Is there any BAPI available to mimick QA11 and force the material from QI stock to unrestricted stock.
    Thanks in advance,
    Pramod

    Hi Peter,
    The requirement is to mimick the transaction QA11.I am all ready using the BAPI_GOODSMVT_CREATE to post the goods from unrestricted stock.But,to move the stock under QI inspection I have to first move it to unrestricted stock and then post it.Is there any other BAPI available for mimicking the transaction QA11.
    Thanks,
    Pramod.

  • What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

    What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

    You should be able to select Force Quit from the menu beneath the Apple icon in Finder
    and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
    OS X - Support
    Not sure if rebuilding the iPhoto library would help this issue. However if you had to
    turn off the computer without the correct method (unplug, etc; instead of menu choice)
    the system may have accrued damages and should be checked, maybe repaired by
    use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
    run 'repair disk permissions' while it is running in that reduced mode; then restart after.
    •Understanding Safe Mode - tuts+ computer skills tutorial:
    http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
    •OS X: What is Safe Boot, Safe Mode?
    Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
    There likely are other means to rectify troublesome applications, including reinstall.
    Be sure to backup your music, image, video, and other work on an external drive
    or suitable device as a precaution against loss should there be a hard drive failure.
    iPhoto - Mac Apps - Apple Support
    There should be some tips and help information using iPhoto via this tiny Support link.
    Good luck & happy computing!

  • LSMW for Quality Inspection Plan

    Dear All,
    I am in process of uploading Quality Inspection Plans through process of LSMW with standard object 0240 (Inspection Plans) with batch input method. With this when I am trying to create Batch Input Session, system is throwing me error as 'Characteristics is not yet created' (Message Number - QS 320). I have maintained all the relevant master data before going to upload Q Inspection Plan.
    Could any one pl. throw light on this issue?
    Regards,
    Prashant

    Depending on what control indicator key for master inspection characteristics have you implemented in the operations within the plan, the system checks if the characteristics are completely maintained.
    This has nothing to do with LSMW, it's just a normal message,.....what I find estrange is that the message you're saying is a warning message not an ERROR message.

  • Function Module for TECO(technically complete) a maintenance work order

    Hi,
    Please let me know if there is any FM for TECO(technically complete) a maintenance work order.
    Regards,
    Vimal

    Is there any BAPI for the same as the FM STATUS_CHANGE_INTERN is doing TECO without considering other statuses which need to be done.
    I do technically complete in IW32 by going to ORDER-FUNCTIONS-Complete-Complete(Technically ). Once done Complete(Technically ) will be inactive and Cancel technical Completion will become active. But when i use this FM it does the teco but when i go to ORDER-FUNCTIONS-Complete-Complete(Technically ) it gives me following status information--System Status TECO is active. Also Complete(Technically ) remains active.
    Please help.
    Regards,
    Vimal
    Edited by: Vimal  kumar on Sep 16, 2008 11:10 AM

  • I plugged my phone in and I'm trying to upload photos like I usually do but iPhoto is saying "Please wait for import to complete". It won't let me close iPhoto or anything. Help please!

    I plugged my phone in and I'm trying to upload photos like I usually do but iPhoto is saying "Please wait for import to complete". It won't let me close iPhoto or anything. Help please!

    apple menu ==> force quit
    LN

  • My Mac laptop IPhoto is "stuck" on a screen that says, "Please wait for import to complete."  I can't get it to complete the task.

    My Mac laptop IPhoto is "stuck" on a screen that says, "Please wait for import to complete."  I can't get it to complete the task.  What do I do next?

    Force Quit the app. It's under the File menu.

  • Any way to force a complete refresh of contacts from Yahoo Address Book?

    Any way to force a complete refresh of contacts from Yahoo Address Book?
    About once a month I delete all my Yahoo contacts and upload a new file. (That may sound crazy but I do it from a master file (a database) both to Yahoo and Lotus Notes and blackberry via Notes. Only takes a few moments. Works for me.)
    When I do this with my iphone it's duplicating some contacts, not a whole lot, but some - maybe 3%. I have reset the sync history before doing this.
    So, any way to wipe the slate clean on the iphone and force a one way refresh?

    Please check you contact name in the device and verify if the names does not start with none alphabetic characters (e.g. @, &, *, etc).  This characters will actually stop the sync process and will not be able to successfully complete the transfer of data. Do the same thing with the contact data you have online just to be sure..
    If that it still doesn't work, delete your Google account on the device, restart, and then recreate the same account.
    Let me know how it goes... 

  • I cannot close or import or any function to iphoto.  I have been getting the same message for many days "Photos are being imported to the photo library.  Please wait for import to complete."  I do not know where the photos would be importing from.

    I cannot close or import or any function to iphoto.  I have been getting the same message for many days "Photos are being imported to the photo library.  Please wait for import to complete."  I do not know where the photos would be importing from.  How do I get it to proceed?

    After Force Quitting, as LarryHN recommended,
    Select the iPhoto Library in the Finder. By default it is in your Pictures folder.
    Ctrl-click or right-click the iPhoto lIbrary. Select "Show package contents" from the panel, that will pop up.
    Look for a folder named "Importing" or "Import". Remove this folder, but don't touch anything else.
    Then launch iPhoto again.
    If iPhoto now is working again, check the folder you removed, if there are any photos that you want to keep and save them.

  • BAPI needed for VL32 (Post goods receipt) and VT02 shipment transaction

    Hi,
    We are currently updating quantities and Performing a Post Goods Receipt against all associated inbound deliveries using BDC (VL32).
    Also, updating the completion date of associated shipments by BDC (VT02).
    As part of upgrade intiative ECC 6.0, we are trying to avoid BDC and looking for suitable BAPI's for the above tasks.
    Please help us in this regard,
    Thanks,
    Madhan.

    Hi,
    Please look following BAPI in Tcode BAPI.
    For Transport
    go tp Tcode BAPI --- > Logistic Exection ---> Transportaion .
    For Billing.
    go tp Tcode BAPI --- > Logistic Exection -> Shopping- >Inbound Delivery
    You find many more BAPI in this Transaction.
    BAPI for PGi is BAPI_GOODSMVT_CREATE.
    To change the header details of a shipment use
    SD_SHIPMENT_HEADER_CHANGE
    To change the stage data use
    SD_SHIPMENT_STAGE_APPEND
    SD_SHIPMENT_STAGE_CHANGE
    SD_SHIPMENT_STAGE_CHECK
    SD_SHIPMENT_STAGE_DELETE
    SD_SHIPMENT_STAGE_INSERT
    To add deliveries to shipment use
    SD_DELIVERY_ASSIGN_TO_SHIPMENT
    Thanks & Regards.
    ShreeMohan
    Edited by: ShreeMohan Pugalia on Jul 17, 2009 8:18 AM

  • Hi i was in the process of uploading photos from my phone three days ago- and have tried to re start  my computer but cannot get out   of " Photos are being import to photo library please wait for import to complete"there are 90 photos and this came

    Hi I was in the procces of uploading photos from my phone three days ago as i have an important art project to finish today. I have tried to restart my computer log off come back on but every time i put my phone to the computer and press up load photos its comes up with "Photos are baeing import to photo library- please wait for import to complete".
    There are 90 photos and this came after it uploaded a few - can you help me - i have tried to quit iphone but this keeps coming up and i need these pics imported from my phone to my computer.
    please help
    thank you

    Apple menu ==> forec quit
    LN

Maybe you are looking for

  • Any way to create a calendar group in server calendar in ical client?

    Does anyone know how, in iCal, to create a "New Calendar Group" (see File menu in iCal) for a CalDAV account created on Snow Leopard Server? This feature only seems to work for Calendars which are on my mac. Even if you are clicked on the CalDAV cale

  • Query of queries disallows SQL right() function

    We're attempting to do a query of queries using the SQL right() function like this: select * from getresults where right([key],charindex('\',reverse([key]),1)-1) not in (#quotedvaluelist(getexcluded.file_name)#) We've even replaced that where clause

  • Sync BB with iTunes

    Hello, Everytime I time to use the Blackberry Media Sync, i get the following message: Your device is not recognized by Blackberry Media Sync. Please check that: 1)a media card is installed correctly in your Blackberry device, 2) mass storage mode is

  • "Include Header Row in Subsequent Pages" is not working for table

    Hi, I'm using version 8.1.2.3337.1.509884. The pagnation feature "Include Header Row in Subsequent Pages" is not working for any table in my design. ( the check-box can not be checked no matter how many times I clicking it) I put such table already i

  • Regarind  CCMS Alert configuration in XI/PI

    Hi Experts, 1) I have created distribution list “DIS_LIST ” in default client 000, in between I have assigned SAP Userids with e-mail ids in SU01 of normal client 001. 2) In normal client 001:  Goto RZ21-> methods -> Display Overview -> The method i