Required Characteristics still open,  want Force inspection completion ?

Hi
I entered results using QE51n, saved and on entering UD, the system says "Required Characteristics still open,  Do you want Force inspection completion ?" Though I have entered valuation / characteristics attributes and bold green tick mark appears.
Please tell me what is missing ?

Hi,
In your result record screen select all line item MIC of which you have  taken result & click on icon of lock ( Closed ) finally save it.
Check & revert me back
Regards
SANIL

Similar Messages

  • Not all physical samples are valuated, force inspection completion?

    Hi
    I have entered results against inspection characteristics but on UD the system gives message "not all physical samples are valuated, do you want force inspection completion?
    What is missing or how can I avoid this message?

    In QE23, Select the inspection lot and check for the physical sample,
    Once you enter both, you will get the screen similiar to QE51 to record result,
    You will see a button for physical sample  which u need to select and do the valuation.
    hope this helps

  • BAPI/FM for forced Inspection completion

    Hello,
    I have a requirement to build a report for automating Mass UD of inspection lots. When users close the PO they are stuck if the ILs are open, hence the requirement. I have built the report for mass UD and used BAPI_INSPLOT_SETUSAGEDECISION with forced UD indicator set. The issue now is in case of long term inspection characterstics are open for the lot, it doesn't close the IL and status is set as LTIN but in other cases it sets the status to ICCO which automatically closes the lot on forced UD.
    Is there a BAPI or approach to force close the IL via the report?
    Edited by: bhatia.garima on Jan 12, 2011 11:30 AM

    Closing thread -- ref. BAPI/FM/Approach for force Inspection complete via program

  • Required Characteristics from 0BI_ALL for new custom object

    Hello,
    I created a small query with the following characteristics on 0BPARTNER info.provider
    with the following characteristics
    Rows:
    Business Partner (0BPARTNER)
    Country(0COUNTRY)
    Region(0REGION) With Variable Mandatory
    Now I need to secure this query by region.Hence started creating new authorization object ZREGUSCA using RSECADMIN and with the following charactertics / Dimensions limiting to only these characteristics out of 40 characteristics from 0BI_ALL.(I donot want to assign 0BI_ALL to S_RS_AUTH, if i do,i cannot secure this query)
    0REGION
    0TCAACTVT
    0TCAIPROV
    0TCAVALID
    0APO_LOCNO
    0CUSTOMER
    0TCAKYFNM
    My question is why do i need to have the last three characteristics (0APO_LOCNO,0CUSTOMER,0TCAKYFNM)
    included in the object apart from the region and the special Characteristics? I found these three non related objects as required, after a lot of trouble shooting?
    How do i know, what are the required characteristics if i want to secure by plant in another query?
    I will really appreciate your responses and thoughts
    Regards
    Sreeni

    Hi Sreeni
    Because the chars are auth relevant and are in the cube.
    0TCAKYFNM is also auth relevant and therefore you need to authorize key figures.
    Chars that are not explicitly in the drilldown must be authorized with aggregation auth, that is with the colon-sign :
    You can find the information in the authorization protocol. There is a block auth relevant chars.
    Record your query via RSUDO for the restricted user and flag the "with protocol" box or go to RSECADMIN->Error logs where you can enter your name to be logged always.
    There, you will also find the protocol.
    Best Peter

  • Long text at inspection completion.

    Hi everyone.
    I have following scenario:
    1.- Quality certificate should get variable data when it is printing. User needs to choice from a list, what he will print for certificates, that must be done at Usage decision.
    2.- I think using UD long text at the time to save UD can solve my issue.
    3.- I just can get automatically UD long text when I force inspection completion.
    How can I get automatically UD long text without force inspection completion????
    Regards.

    Hi everyone..
    I think I wasn't clear in my initial request....this is regarding long text for UD....
    Since you force inspection completion in UD (QA11), and save your UD, system automatically show you other screen "Change long text on usage decision", and you can enter any text.
    But that only  happend when you force inspection completion....when you don't force inspection completion, long text can't be updated....
    I need that screen "Change long text on usage decision" appear every time, with or wihout forcing inspection completion...
    I'll really appreciate your support.
    Best Regards.
    Juan.

  • How can i delete an app on my desktop that says it won't delete because it's still open, even though i have done force quit numerous times.

    How can i delete an app on my desktop that says it won't delete because it's still open, even though i have done force quit numerous times? I even deleted it's files in my Finder and it just won't go away.  Help please!! TIA

    Restart the computer then delete it.
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
        1. AppZapper 2.0.1
        2. AppDelete 3.2.6
        3. Automaton 1.50
        4. Hazel
        5. AppCleaner 2.1.0
        6. CleanApp
        7. iTrash 1.8.2
        8. Amnesia
        9. Uninstaller 1.15.1
      10. Spring Cleaning 11.0.1
    For more information visit The XLab FAQs and read the FAQ on removing software.

  • Showing Long-term characteristics are still open

    Hi QM expert,
    i am using inspection type 03..after result recoding of all operation..i do UD..and save that...
    but show Long-term characteristics are still open
    status show LTIN STIC STUP
    kindly suggest me what to do
    Regards
    akil

    Hi,
    my client require in process inspection inspection type 03 and and after GR inspection type 04.
    i have ticked  in  material master Inspect with Material Specification, in 03.inspection type ..
    .then in result recoding MIC not coming..then again i have change  .i have ticked  Inspection with Task List.then and un ticked  Inspect with Material Specification  then show all MIC at the time of result recoding .
    what ever MIC  i have maintained in  routing  operation
    ..now i do result recording with value and and accept all MIC value....
    then i do UD...i select A ( accept UD) then save...but when open UD screen..show the massage Long-term characteristics are still open near the Insp. End Date
    i save that  
    then show the status ...LTIN STIC STUP
    again i opened result recoding and add new MIC and accept that and saved...
    then i opened UD screen...and i selected again A (accept) and saved...
    but agian showing same massage
    Regards
    akil

  • I want my tabs to not open automatically and even though i have set to do that it still opens it automatically, i've tried all solutions that were provided nothing helps.

    i have the "when i open a new link in a tab, switch to it immediately" option unchecked. it still opens them when i open a new link. i found someone who was having the same problem but the solution to his problem did not help me. i have restored my prefrences, disabled all addons and plugins. nothing worked
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3

    Hello Trey.
    I believe your issue comes from a slight misunderstanding... It's not your fault, of course, Firefox should be clearer in this aspect, but I should be able to clear the misunderstanding and make sure you know what's going on.
    The "when i open a link in a new tab, switch to it immediately" option only applies to tabs open deliberately in a new a tab. For example, when you middle-click (click your mouse's scroll wheel) a link (or use the appropriate contextual menu entry). It doesn't apply to links that are set by the site to open in a new tab. This is normal standard behavior, and isn't likely to change any time soon, but there are multiple things you can do so it doesn't bother you.
    For example, you can middle-click (or use the appropriate contextual menu entry) the links you want to open on a new tab, instead of right-clicking them and have them open in a new tab only if the site has instructed your browser to do so. You can also go into ''Tools > Options > Tabs > Open links that open in a new window in:'' and select "Current tab", so the links that are instructed by the website to open in a new window/tab, are open in the same tab, and so you have complete control of where each link opens. This setting, however, is known to cause some trouble in some websites that are pop-up-heavy, so use this with caution.
    I hope this helps.

  • Hi I do not want iTunes to open up automatically when I turn on my macbook pro.  I tried going to System Preferences Users and Groups Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop.

    Hi I do not want iTunes to open up automatically when I turn on my macbook pro.  I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?

    Hi r,
    Make sure you close iTunes before shutdown.  And you're quite welcome.

  • Sales order from contract: all the items completed but still open

    Hi all,
    I have a problema with several sales orders created with
    reference to the same contract. Most of them have several
    items, all completed but still open. An example: there's an
    order with three items, two of which with complete delivery e the third marked for cancellation ( code S1 ). Why does the
    system show the first two items as not complete, despite the
    fact that both have complete delivery? Can the problem refer
    to any characteristic of the related contract? Can anyone help me on this topic?
    Thanks in advance.
    Adriano.

    Hello,
    Did you have a look in BADI CRM_COPY_BADI?
    Regards,
    Frédéric

  • Force Quit showing apps still open

    I've noticed this on a few occasions. Currently, I'm showing iBooks, Pages, & Preview are still open via the Force Quit dialog but I haven't used them since the previous evening. (Screen shot of dialog and dock for comparison).
    I have an older Macbook (Aluminum, Late 2008) so I try to run as lean as possible. There are no extra windows open that I can find.  Double clicking them from Force Quit brings them up to then quit from the application proper, however, I would really like the apps to quit when I tell them to.
    Has this to do with iCloud integration? (Like Pages wasn't quite done with an iCloud upload before I quit).
    Is it a random hang?
    Should I try a reinstall of the apps or Mavericks? (I'm not even sure if 'still open app' is consistent).
    Thanks in advance.

    I've noticed this same problem, but with TextEdit and Preview.  The dock will say all my apps are closed, but when I check in Force Quit, some of them are still open.  Only noticed by accident once when I needed to Force Quit something else and was surprised by what was also listed in there as open.
    As far as I can tell there are no negative effects of this happening . . . it's just annoying . . . which means Apple won't be fixing it anytime real soon.
    I'm about to upgrade to Yosemite . . . wonder if it also happens there.
    BTW, I've only seen it happen with Apple Apps . . . none of my other apps have shown up as "quit, but still open".
    I'm on a Mac Mini running 10.9.5

  • Sample  still showing in quality inspection stock after usage decision completed

    After process order completed, we have received 100 units as a quality inspection stock.  After usage decision,( QA11), I have posted 98 units to unrestricted use and 2 units to the  to sample usage
    98 units successfully move to unrestricted stock.
    However 2 units for sample still showing quality inspection stock.
    I have checked MB51, mat document number for sample is 4900000160 and movement type is 331
    Do you have any idea why sample still showing in quality inspection stock. It  should consumed and zero out the quality inspection stock in MMBE

    Hi,
    Please check you MIC's control Indicators.
    Is it tick on Destructive insp. under Sample tab ?
    Please tick it and try again with whole process.
    Destructive Insp. : You specify whether the sample is to be destroyed after inspection. This means that is no longer available. This quantity is used in the usage decision as the proposed quantity for the posting to sample.

  • When closing my Firefox window, all processes are not closing requiring me to open task manager and kill the process before using Firefox again. Received recent upgrade and hasn't worked right since then.

    I open Firefox, use it, then close the window. Try to reopen Firefox and it fails with a message that a previous process is still running. Requires me to open Task Manager and kill the old process.

    Try to wait a bit longer before reopening Firefox to give Firefox more time to close completely.<br />
    Try to use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    *https://support.mozilla.com/kb/Firefox+hangs

  • After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading.

    After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading. I have no special software like numbers or anything else installed on either device. Just using the default viewer provided by apple for viewing email.

    The attachment is an .xls excel 97-2003 spreadsheet. I viewed the file in the email and did not edit it with any software. I can forward the file to anyone that is may want to check it out to see if they can help me. I was wondering if there was some way of forcing another ios6 install on my phone and maybe that would solve it.
    Is there anyone out there that is viewing .xls files in email using ios6 w/o any other software installed like numbers or any other add ons? I am not upgrading my ipad from ios5 to ios6 so I can still continue to view the emails on my ipad. Is there an email viewer .xls plug-in that will be availablle in the next ios6 update?

  • TS1702 My Kindle app suddenly stopped working on my iPhone 4s. All my software is up to date and I have restarted the phone, uninstalled and reinstalled the app and it still opens and shuts down instantly. Any ideas?

    My Kindle app suddenly stopped working on my iPhone 4s. All my software is up to date and I have restarted the phone, uninstalled and reinstalled the app and it still opens and shuts down instantly. Any ideas?

    We need clarification here.
    Please don't just state version numbers, also state which software.  iTunes 10.7 requires OSX 10.6.8 or higher.  Leopard is OSX 10.5.8.  You have two alternatives right now.  One is to stay with Leopard for a while (ultimately you should upgrade) and install iTunes 10.6.3 which is the last version to work with Leopard.  This should work with iOS6 on an iPhone4.  The other is to call Apple and order OSX 10.6 (Snow Leopard) and upgrade the computer to 10.6.8 which will allow you to run iTunes 10.7.  The caveat is we know nothing about which computer you run and if it even can run any system higher than Leopard.
    Here is iTunes 10.6.3
    iTunes 10.6.3 - http://support.apple.com/kb/DL1575
    If you want to try upgrading:
    Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About this Mac" and "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).  If it says something about Intel or Core Duo or Core 2 Duo in the processor you can upgrade to Snow Leopard (assuming you have sufficient RAM/"memory").  If it says PPC or PowerMac, you cannot.
    Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion -  https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store. 
    It would help when posting issues here if you would state exact error messages you see.  "It's still not working!" while a description of the situation does not speed us to a diagnosis of the underlying issue.

Maybe you are looking for