Bapi for class classification

hi ,
how to upload the class classification details in ca01 using bapi_routing_create.
thanks in advance
Edited by: Arun on Jul 18, 2011 1:46 PM

Jessica,
Try looking at the following: BAPI_BUPA_FRG0040_CREATE
Note that if you already have maintained Sales Classifications then you'll have to use the _CHANGE version.
It has the importing structure of type BAPIBUS1006040_SALESCLASS and so you could for example populate it's fields as shown below and using the structure when calling the above BAPI:
DATA
       IS_COMPETITOR
       IS_PROSPECT
       IS_CONSUMER
       IS_CUSTOMER                    X
       CUSTOMER_SINCE
       IS_COD_CUSTOMER
       INDUSTRY
       IS_RENTED
       ACCOUNT_GROUP                  0001
       NIELSEN_ID
       CLASSIFIC
       ATTRIBUTE
       ATTRIB_2
       ATTRIB_3
       ATTRIB_4
       ATTRIB_5
       ATTRIB_6
       ATTRIB_7
       ATTRIB_8
       ATTRIB_9
       ATTRIB_10
Regards,
Brad

Similar Messages

  • BAPI for equipment classification

    Hi,
      Does anybody know the BAPI for equipment classification and also the required fields of the BAPI.
    With Regards,
    Nelson

    Hi,
    Check this Bapi <b>BAPI_EQUIPMENT_SAVEREPLICA</b>, Sure it will help u...
    Regards,
    Sridhar

  • FM/ Bapi for  hierarchy   classification

    Hi
    I am looking for FM/ Bapi for  reading values of  hierarchy   classification.
    I tried  BAPI_OBJCL_GETDETAIL,  however the bapi read only the value of the high level
    of the class and not all the hierarchy values.
    Any idea how to read all the hierarchy values ?
    Thanks Moshe

    Check Function Group V51B in SE80.

  • BAPI for characteristics and classes

    Hi all,
    I need to upload classifications, characteristics and characteristics value
    and classes to the master and also need to extract the same from the material master..
    Can any one of you suggest me any BAPI of function module or any othe way so as to implement the above requirement..
    Useful answers will be rewarded..
    Thanks in advance..
    Arun

    Hi,
    Check all,
    BAPI_CLASS_ALLOC_GLOB_DEP BAPI: Assign Global Dependencies to Class
    BAPI_CLASS_CHANGE BAPI: Change Class
    BAPI_CLASS_CHARVALUE_DEL_DEP Class BAPI: Delete Local / Global Dependencies for Characteristic Valu
    BAPI_CLASS_CHARVALUE_GLOB_DEP Class BAPI: Assign Global Dependencies to Characteristic Value
    BAPI_CLASS_CHARVALUE_LOCAL_DEP Class BAPI: Maintain Local Dependency for Characteristic Value
    BAPI_CLASS_CHARVALUE_READ_ALLO Class BAPI: Read Dependencies for Characteristic Value
    BAPI_CLASS_CHAR_ALLOC_GLOB_DEP Class BAPI: Global Dependencies for Characteristic
    BAPI_CLASS_CHAR_DELETE_DEP Class BAPI: Delete Global / Local Dependency for Characteristic
    BAPI_CLASS_CHAR_LOCAL_DEP Class BAPI: Assign / Delete Local Dependency for Characteristic
    BAPI_CLASS_CHAR_READ_ALLOC Class BAPI: Read Dependencies for Characteristic
    BAPI_CLASS_CHAR_VALUE_TEXT_DEL Class BAPI: Delete Overwriting of Long Text for Characteristic or Value
    BAPI_CLASS_CHAR_VALUE_TEXT_OVR Class BAPI: Overwriting of Long Text for Characteristic or Value
    Reward if useful!

  • Error while saving Prod order - "Class for order classification"

    Hi all
    I am getting the following error while saving the Production Order -
    "Class for order classification has not been generated".
    I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
    Any help would be highly appreciated.
    Thanks in advance.
    Hrishi

    Solved

  • Activation of History Log for Material Classification CLASS TYPE 001

    Hi All.
    I've a question about this object.
    We need to launch RCCLUKA2 to activate multiple objects registration and to generate history log for changes in classification of materials (AUSP table).
    Reference are sap notes 942691 and 943559.
    I FOUND OUT THERE'S a big problem. RCCLUKA2 change AUSP objek key, using internal number range from INOB objects.
    There're hundreds of custom reports and other stuff that read AUSP directly with Matnr Code as objek key.
    I think that's a serious problem, isn't it? Or is there any solution about ?
    Thanks for Help!
    _______> old message
    This report RCCLUKA2 does 5 steps.
    1 step: activation flag for multiple objects in table TCLA and TCLAO only for  input class type (in this case 001 -> MATERIAL);
    2 step: download of KSSK data and AUSP data in two text files (name defined in input parameters);
    3 step: delete all KSSK data and AUSP data for class type 001,  10.000 records every loop;
    4 step: create reference object in table INOB for all records inserted in KSSKFILE, inserting all records in KSSK table at END of INOB upgrade;
    5 step: inserting record in AUSP table from all records inserted in AUSPFILE, using INOB objectid created in step 4.
    DEQUEUE ALL
    We think that this process is a little bit dangerous in production system, due to procedures that always run, in background or foreground.
    I've found a work around that creates an implicit enhancement for LCLVFF10 form FILL_REDUN.
    I think that it's not suggested to create this enhancement because of the missing flags in TCLA/TCLAO and missing reference in INOB and KSSK database.
    This enhancement would create records only in CDHDR and CDPOS with a general key object reference (such concatanate matnr(without-letters) mafid and atinn code).
    This enhancement couldn't also activate the standard function of reading document changes from standard menu in MM03/MM02/MM01, etc..
    Do you have any suggestion about this?
    RCCLUKA2 is a very old report. SAP didn't give any advice or upgrades for this need?
    Thanks for your help
    Message was edited by: Roberto Vacca

    Dear ,
    changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
    For class type 001 or 300 the change document isnu2019t available.
    Thanks.

  • Class Type 019 for operation classification in Routing

    Hi,
    I need to assign class type 019 for classifying operation.
    Its giving the below error: "Data for class type 019 has not been converted yet"
    The details of the help are as below:
    Can any one update the implications of the steps or how can Proceed with this.....
    Diagnosis
    You want to define resource selection conditions. In this case, you need to classify the operations with class type 019. The data for class type 019 must be converted first.
    Procedure
    1. In Customizing for the Classification System, call the classifiable object types.
    2. Make a note of the settings for the following objects in object table CRHD (work center) and class type 019:
    AFVC
    CRHD
    PLPO
    3. Delete these objects and save your settings.
    4. In the main menu, choose Tools -> ABAP Workbench, and then Development -> ABAP Editor.
    5. Enter the program name RCCLUKA2 and choose Execute.
    6. Enter class type 019 and choose Execute.
    The system converts the data of this class type.
    7. Call the classifiable object types in Customizing for the Classification System again.
    8. Use the settings you have written down to create the objects again that you have deleted before
    Thanks
    Amlan C

    Dear,
    The classification data of the resource has not yet been converted.
    So that the same classes can be used for defining the selection conditions as for classifying resources, a conversion must be carried out for class type 019.
    Please start report RCCLUKA2 in SE38  with the following parameters: Object table:      CRHD
    Class type:        019
    Regards,
    R.Brahmankar

  • Regarding BAPI for Creat Class Hierarchy

    Hi ,
    Urgently i need a BAPI for to create Class_Hierarchy and also need what are the parameters to pass for that BAPI .
    Please any body help out this is urgent.
    thanks in advance,
    krishna.

    Hi,
    The relavant BAPI is BAPI_OBJCL_CREATE.
    You can read the characteristics by using BAPI: BAPI_OBJCL_GETDETAIL
    Plz check other BAPIs in FuGr: CLBPA which might help you. You can find FM Documentation for most of the BAPIs in this FuGr.
    If this is a one time load, I suggest you to take up this task by LSMW:
    Object               0130   Classification
    Method               0001   Batch input  
    Program name         RCCLBI02            
    Program type         B   Batch input    
    Hope this helps.
    Best Regards, Murugesh AS

  • BAPI for Allocating Object to Class

    Hi all Experts,
    Pls help in how to use the following BAPIs.
    BAPI_OBJCL_CREATE_KEY
    BAPI_OBJCL_CHANGE_KEY
    OR else provide me any other BAPI avaliable for Allocating Object to Class in MASS Processing / Single Entries.
    Regards
    Nagarajan M

    Hello,
    have a look at the following thread. There're some function modules that should fit to your requirements:
    BAPI for CL24N
    Best regards
    Stephan

  • PM : Does PM support multiple  Class types for Equipment classification

    Hi,
        Do  Plant maintenance support multiple class types for the classification for the equipments.
    Our  Customer has created his own class type other than 002(Equipment) for the classification and wants to know weather PM supports such class types or not.
    Thanks and Regards,
    Anuj
    Edited by: Anuj Goyal on Mar 13, 2008 10:16 AM

    hi
    i think you can use the your own class type provided you have done all the settings related to the standard class type 002,also if you have create your class type your standard class type will be changed to either the newly created one or 002 based on settings made by you
    regards
    thyagarajan

  • Assigning Classification using CL20N for class type '048'

    In CL20N i am entering the following values:
    Document Type : ZZZ
    Document : 10000100
    Doc. Version : 00
    Document Part : 000
    Object : MARA & 123P456(Material Number)
    Class Type : 048
    When i enter these values i am getting an saying "Object not found"
    I see some problem with Object type & Object Key. I have enetred these fields as they are populated inthe Z-Table "DRAD".
    Kinldy suggest me if i need to pass something else to make it work.The assigment works fine from DMS transactions but i need it to assign from this CL20N.
    Thanks
    Abhishek
    Points for sure

    Hi
    Can you explain the scenario?
    One more thing, Class type selected must be 017 which will only allow you to add classes to document and not material.
    Generally 048 is used with Release strategy in MM where you dont need to specify values in release strategy n the same is achieved thru this CL20N
    Probably you need config for SPRO >  Classification > Classes > Maintain Object Types and Class Types
    Niranjan
    Let me know if it helps !!!

  • BAPIs for Equipment list, Equipment classification details

    Hi,
    Can somebody give me the details of BAPs for getting
    1.    Equipment list for a given function location.
    2.    Equipment classification details for the given equipment number.
    Thanks & Regards
    Lakshminarayanan J

    Hi,
    what do you mean with details? Do you need the fields? You can do a double click on the data type of the details filled for browsing deeper into the structure of the details. Or you can use TCODE SE11 and check the type in the data dictionary.
    Best Regards,
    Marcel

  • BAPI for assign equipment to a class

    Hi SDN,
    I need assign an equipment (table EQUI) to a class, using BAPI (as CL24N - Assign Objects/Classes to Class ).
    Can you please help?
    Thanks in advance,
    Best Regards,
    Maria João Rocha

    Hello,
    have a look at the following thread. There're some function modules that should fit to your requirements:
    BAPI for CL24N
    Best regards
    Stephan

  • BAPI for fill class characteristics

    Hi,
    Wich BAPI schould I use to fill class characteristics,
    where class is associated with batch.
    Please it's very important
    Regards,
    Greg.

    BAPI_CLASS_ALLOC_GLOB_DEP      BAPI: Assign Global Dependencies to Class
    BAPI_CLASS_CHANGE                      BAPI: Change Class
    BAPI_CLASS_CHARVALUE_DEL_DEP   Class BAPI: Delete Local / Global Dependencies for Characteristic Valu
    BAPI_CLASS_CHARVALUE_GLOB_DEP  Class BAPI: Assign Global Dependencies to Characteristic Value
    BAPI_CLASS_CHARVALUE_LOCAL_DEP Class BAPI: Maintain Local Dependency for Characteristic Value
    BAPI_CLASS_CHARVALUE_READ_ALLO Class BAPI: Read Dependencies for Characteristic Value
    BAPI_CLASS_CHAR_ALLOC_GLOB_DEP Class BAPI: Global Dependencies for Characteristic
    BAPI_CLASS_CHAR_DELETE_DEP     Class BAPI: Delete Global / Local Dependency for Characteristic
    BAPI_CLASS_CHAR_LOCAL_DEP      Class BAPI: Assign / Delete Local Dependency for Characteristic
    BAPI_CLASS_CHAR_READ_ALLOC     Class BAPI: Read Dependencies for Characteristic
    BAPI_CLASS_CHAR_VALUE_TEXT_DEL Class BAPI: Delete Overwriting of Long Text for Characteristic or Value
    BAPI_CLASS_CHAR_VALUE_TEXT_OVR Class BAPI: Overwriting of Long Text for Characteristic or Value
    Just check these FM
    Regards,
    Pavan P.

  • BAPI for Creation of inspection lot

    I have two scenario:-
    1.Can any body help to find BAPI for creation of Inspection lot for the material under PO envisaged for PDI.
    2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
    My objective is to creation inspection lot without assigning Inspection type of Z01SI01 or Z01SI02 and so on in the material code under a respective Plant 1004 or 1005 0r 1006 so on.
    In my Z Development for creation of inspection lot BDC is run for QA01 as this code created inspection lot on when material code has inspection type Z01SI01 i.e. location of source inspection and vendr code particular classification under 010 vendor class inspection type Z01SI01. System search both the inspection type for both material and vendor then create inspection lot in QALS table by assiging inspection matching inspection on the lot.
    I want to get rid of assignment of inspection on the materilal. If any BAPI or FM is avalable for creation of inspection without assigning inspection type on material code. I want to create inspection lot in which Inpsection type assignment can be done based on vendor class only.
    YPB

    2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
    I am very sure that this is not possible.You can not create inspection lot without inspection lot origin or inspection type.
    Regards
    Sujit

Maybe you are looking for