Creating an inspection point

Hi,
Where in the SAP menu or SPRO I can create the inspection point?
Thanks
YY

Dear YY,
To creat an inspection point follow below path
SPRO u2013 Quality management u2013 Quality planning u2013 Inspection planning u2013 General u2013 Define Identifier for Inspection points
Thanks
Vinay

Similar Messages

Create a Inspection Point

Hi,
I need help. What is the way to create a new Inspection point by the Transaction QE51N and the BAPI_INSPOPER_RECORDRESULTS?
Thanks in advance.

Dear Trini Rolden,
      The Transaction QE51N is used in SAP for result recording purpose.
Result are recorded against inspection lot.Again inspection plan assign in inspection lot. If you maintain inspection point in inspection plan header, then you can record the result of that particular inspection point.
If you wants to create inspection point functionally, follow the below step:-
SPRO -> Quality Management - > Inspection Planning -> General --->Define Identifier for inspection Point -> Execute --> (Create your own inspection point)
If you wants to prefer Customize Developement:-
user exit QAPP0001 -->User exit QAPP 1 (create inspection point)
You can use this to give pop up or default names of the inspection point
here you can call
ALL FUNCTION 'BAPI_INSPPOINT_CREATEFROMDATA' "Create Inspection Point
EXPORTING
    data =                      " bapi2045l4    Data for inspection point
IMPORTING
    insplot =                   " bapi2045l4-insplot Inspection lot number--->use user defined
    inspoper =                  " bapi2045l4-inspoper Inspection lot operation number
    insppoint =                 " bapi2045l4-insppoint Inspection point
    return =                    " bapireturn1   Return value
    . " BAPI_INSPPOINT_CREATEFROMDATA
Regards,
Laxmikanta.

Creation of multiple inspection points

Hello experts,
I try to figure out how to create multiple inspection points for one operation at process order release.
It means that the release of the process order triggers:
- inspection lot creation (lot origin 03)
- inspection points creation for operation with inspection characteristics assigned to it
In the recipe header, I entered inspection points = 150 - generated inspection point, qty or time
(module function QAPP_CUST_IP_CREATE is activated for "automatic creation of insp. points")
In the operation header, I select time related -and enter 1 HR
However no inspection point is created at process order release. Only inspection point identifier is created automatically when I select the next inspection point in TR QE51N.
Do you have any tips on the subject ?
Thanks in advance
Best regards
Amaury

Dear Amuary
Doubt if there is any solution in standard. Use exit so that thr first 3 inspection points gets activated quickly. Try these exits
QAPP0001
User exit QAPP 1 (create inspection point)
| QAPP0002 |User exit QAPP 2 (create inspection point & other data)
Regards
Gajesh

Auto creation of time based inspection points against in process required

Hi
We want system to create/generate inspection points automatically when process order is released and inspection lot is created. Currently we have to create inspection point manually using either QE71 or QE11. Previously when scheduling was active in PP, inspection points had been creating automatically for the duration of process order. But now PP scheduling is not required and as a results inspection points are not being created automatically.
Please assist.
regards
Chris

SAP provides a FM, (QAPP_CUST_IP_CREATE), to be used as a template to create your own FM for automatically creating inspection points. There is documentation in the FM to explain it. You then assign this FM in configuration where you define the inspeciton point identifiers.
FF

Automatic Inspection points...

Hi,
There are two operations in routing and inspection will be done at each operation hourly. When the first operation is rejected material will be scrapped / re-worked. I attached in-process inspection (03 inspection type) to material master.
Attached inspection points 150 at routing header and at the operation details I checked the u201CTime-Relatedu201D radio button. I assigned TFac = 1 Hour.
When I create a production order system generates in-process inspection lot. However, I am unable to generate hourly inspection points for both operations. Please advice how to carryout hourly inspection at both the operations? Does these inspection points get generate automatically ? If so how to set up for automatic inspection points generations ?
Am I following the right steps to perform hourly inspection? Is there any other way to handle this process ?
Please advice
Many thanks
Regards
S

The characteristics tested at operation 10 and operations 20 are different. For example, if diameter is measured at operation 10 then if diameter is not ok the manufacturing stops at operation 10.
If diameter measurement at operation 10 is OK then operation 20 will be performed. The characteristic viscosity is measured at operation 20. If viscosity is OK at operation 20 then further operations in the routings are executed else manufacturing stops at operation 20.
If any issue identified at operation 10 or 20 further execution of operations will be stopped and some actions are taken to improve the process.
When I assigned inspection point 150 to routing header an inspection lot ( 03 type) is getting created. When I click on u201CResultsu201D in QA32 system is asking me to enter the u201CPartial quantity no.u201D.
In QE71 I see an two inspection lot created for each operation (same inspection lot number for both the operations). When I save QE71 after entering Partial quantity, Validate Inspection point and Result system is creating another inspection point.
However, the new inspection point is getting created only when I save the first inspection point. This process is not happening automatically. I would expect system to create inspection points automatically for every hour.
I may need to work with technical guys to enhance the functional module QAPP_CUST_IP_CREATE for automatic creation of inspection points.
Please advice if there is any other way to map this scenario.
Many thanks
Regards
S
Regards
S

Multiple result recording for Manual inspection Lot using inspection point

I want to record inspection result for inspection type 89 against *inspection point*. Then I create new inspection point and assign it in quality plan. Then I have done the multiple result recoding against one manual inspection lot in DEV server. But when it is going to QAS server then error is coming during result recoding. Error is "The results transaction cannot be used for
inspection" Message no. QE094.
Plz give me the solution to record the result.

Reason is very simple : the the inspection point definition in the task list header is incompatible with the sampling procedure assigned to the characteristic.Make sure that you select the appropriete radio button in QDV1 while creating sampling procedure and assign the same against each of the MIC's in the task list.
Make sure that the sample tab in QA02 is pressed while assigning the inspection specification & status of the lot is REL

Settings for inspection point user field

Hai gurus,
i want to know the settings for inspection point user field(150)
1) Field combination = 150
2 )Inspection type = ?
3) Functional location- field active = ?(predefined field)
under user field
1)Text length 18 - Field active = ?
2)Text length 10 - Field active = ?
3)Number length 10 - Field active = ?
4)Number length 3 - Field active = ?
5) Date - Field active = ?
6) Time - FIeld active = ?
waiting for positive reply.
regards,
sekar chand

dear Sekar
1) 150 inspection point is maily used for production related inspection. 03 , 04 . it is a freely defined inspection point which means you want to carry out several inspections for each operation during the production process
2) It is not Inspection type it is inspection point type- There are mainly 3 inspection point type
Freely defined - explained
Equipment related - You need this inspection point type if you want to carry out calibration inspections and record the results of test equipment inspections or inspections of functional locations
Inspection points to identify samples-You need this inspection point type if you want to manage samples and record inspection results for physical samples
3) Predefined field is for identification of the inspection point.
Example for inspection point type 1
For inspection point type 1 (inspection point for equipment) that is used, for example, in a calibration inspection, the equipment number must be entered. (To access the results recording function, however, you can use a different key word instead of 'equipment number', such as, 'test equipment').
Example for point 3
The sample-drawing procedure determines the number of samples to be taken. The system automatically creates an inspection point for each sample.
4) User fields are again identification. You can add in key work text which will appear while result recording.
5) Field Active -This helps in sorting out the user fields. An identification field is only active if you have made an entry in this field.Fields with numeric entries are required fields. The numbering sequence that you define for these fields uniquely identify an inspection point.
a typical example can be User field/field active/keyword combination
1)Text length 18 -1 -Inspector Name
2)Text length 10 - 2- Location
3)Number length 10 - 3- Shift No
4)Number length 3 - 4- Section No
5) Date - 5- Date
6) Time - 6- Time
please Date and Time populates automaticaly. it is not mandatory that you use all the fields
Hope this helps
Regards
gajesh

BAPI for inspection point

Hi,
I am trying to find BAPI through which i want to do inspection point and result recording. If anyone has done then let me know which bapi is suitable and provide what are all data's need to pass.
Regards / US

Hi,
Check the documentation for function BAPI_INSPOPER_RECORDRESULTS. That gives a pretty detailed description of all the import requirements
Functionality
You can use this method to confirm the result of a quality inspection for an inspection operation or inspection point. The following functions are supported:
Creating an inspection point
Closing an inspection point
Changing inspection point data
Recording inspection results at characteristic level (summarized)
Recording inspection results at sample level (summarized)
Recording inspection results at single value level
You define within an inspection operation whether you work with or without inspection points. In accordance with this specification, the parameter INSPPOINTDATA is required or optional.
Regards,
John

QM about the Inspection Points

Hello everyone, I have create the inspection points in the process of the material incoming inspection. BUT, now our Data Entry input worry information in the inspection points. SO, how can i delete this point ?
I looking forward to your answer, thank you very much~~!

once create point you cont do any thing remove inspection point in routing or receipe then create production order or process order then you wont get the inspection point in results recording

Request tcode for create inspection points

Hi Experts,
We uses inspection points to record muiltiple result,
Because there are different persons to create inspection points and record results,
if there are tcode for create inspection points, we can do it more convenience。
Thanks .
Denis.
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again.
Edited by: Thomas Zloch on Feb 18, 2011 5:10 PM

Hello Mr. Amorsen,
Follow Charm_create step by step using customer name:
1- Create a new transaction using t_code SE93 (E.g.: ZCHARM_CREATE )
2 - Copy the program : CHANGE_REQUEST_CREATE_SOCM to Z using SE38
3 - In SE93, change the program to Z created in step before
4 - In SE80 Copy the function group Change-request_socm to Z
5 - copy the function modules too (will appear a pop-up asking for this)
6 - Change the include ; LZCHANGE_REQUEST_SOCMTOP
     IN LINE 30 : gc_processtype(4) TYPE c
            VALUE 'ZDCR', "process type for change request
     Change value to ZDCR
7 - Activate all
8 - In SE38 report: ZCHANGE_REQUEST_CREATE_SOCM , change the call function SOCM_CHANGE_REQUEST_CREATE to Z
9 - activate.
Done !!!
<<text removed>>
Regards
Claudenir Bispo
Edited by: Matt on Oct 5, 2011 9:39 AM

[QM] How to create an inspection lot with task list assigned?

Hello, everyone.
I know, the similar questions have been asked plenty of times, but I am still unable to find a suitable receipe of the inspection lot creation. My goal is to create an inspection lot programmatically and be able to record its results using, e.g., BAPI_INSPOPER_RECORDRESULTS.
Creating a lot does not appear to be a big problem. I just call the following FMs:
QPL1_INITIALIZE
QPL1_INSPECTION_LOT_CREATE
QPL1_UPDATE_MEMORY
QPL1_INSPECTION_LOTS_POSTING
BAPI_TRANSACTION_COMMIT
As a result, I have a new shiny inspectin lot, but it comes with statuses "CRTD" and "CHCR". I do specify PLNAL and PLNNR fields values for the QALS structure which is passed to QPL1_INSPECTION_LOT_CREATE, but that does not seem to have any effect. When I call BAPI_INSPOPER_RECORDRESULTS later (result values and inspection points come from another lot which is used as a template), it reports of beging unable to find characteristics for the inspection operations (error E026).
Does anyone know which of the QPL1_INSPECTION_LOT_CREATE parameters affect task list assignment besides PLNAL and PLNR? Or maybe there is a special FM which associates a task list with an inspection lot?
Thank you in advance.

Hi Samuel,
You can get create an Agent as a Task by using the following steps:
1. Go to Customizing --> EHS --> Industrial Hygiene & safety --> Risk Assessment --> Specify Agent Types
2. Click on "TASK' Agent type and click on Details icon (CtrlShiftF2)
3. In the "Only EHS-IHS" drop down, Select "No"
4. Save the entry
5. Now try creating an Agent [CBIH92] and you can create an Agent as a Task.
Hope it Helps,
Raghu

Object Link to Inspection Point (QAPP)

I am trying to set up a new obejct link to an inspection point. So, to start with I am trying to create a bespoke screen that will perform exactly as screen 204 the Equipment master object link.
I have created two new screens SAPLCVIN 9000 and SAPLCV00 9000 by copying SAPLCVIN 204 and SAPLCV00 204. I have assigned these screens to the new object type QAPP and assigned this to the document type. I have copied the EQUI settings in the Key Fileds table and assigned them to QAPP.
I have also copied the function module OBJECT_CHECK_EQUI into OBJECT_CHECK_QAPP but have not yet made any changes to the code in this function module. When I try to view the new screens in CV02N I get a short dump telling me that DYNPRO 9000 is not found.
Presumably this is because I haven't made any code changes to the function module. At this stage I haven't even changed any of the fields from screen 204 I'm just trying to eliminate the abap dump. Can anybody help me with this please?

1. Copy FM QAPP_CUST_IP_PROPOSAL and use this in your inspec. point identire conguration in the Default for user fields in results recording. You have to provide all the logic in the FM to identify the next serial number. You can also us a copy of the FM QAPP_CUST_IP_CHECK in the verification of user fields to check to make sure the serial number wasn't already specified in an earlier lot is the next in the series. Again, you have to put in the correct logic.
2. I think you are looking for the drop down list in this question. Use FM QAPP_CUST_IP_F4 for this. You can either develop a new new FM for each inspec point identifer you use, and hard code the values into the FM, or create a Z table that your FM references to look up the appropriate values for the insepction point and user field.
3. Same as number 2 above.
FF

Setting up inspection point in a scenario require more than one inspection

Hi all,
Maybe I am still not very clear on the PP-QM conceptu2026 hope you can see my problem on the following questionu2026..
According to SAP in the QM-production environment, we key in ONE inspection point in the task list header level (i.e. either the master recipe, routing, or rate of routing).
Based on the following business scenario which is going to use inspection point for the inspection:
u2022     Time-based intervals (for example, an inspection point every hour or for each work shift)
u2022     Quantity-based intervals (for example, an inspection point for each container)
u2022     Freely-defined intervals (for example, an inspection point each time a tool change occurs)
Since each of the above scenarios require more than one inspection points to be created and to be assigned to the task list header.
Thus, how to accomplish multiple inspection point assignment when the task-list header only allow me to assign one inspection point at a time?
Thanks
YY

Hi guys,
Thanks. However, in the SAP help portal it does said the system allows several inspection points to be assigned to an inspection operation whether it is in routing or recipe.
Therefore, does it means I can assign more than one inspection points in the operation detail level for either recipe or routing if I will to click the u201CNo relationu201D radio button in the u201CQuality Management: Inspection Pointu201D section. (i.e. is this is the right place to allows this assignment)?
For example, on the change master recipe screen at the Operation tab, I highlight one line item (i.e. one operation line item and zoom into this operation line item, I donu2019t see any field box that allow me to assign several inspection points to an operation? Instead, on the u201CQuality Management: Inspection Pointu201D section, there are the following fields appear:
- Insp.pointCompletion dropdown box
- 4 radio buttons on the inspection interval (ie. Time-related, Qty-related, No-relation) and its subseq time and quantity value input box.
- Quan.pt. lot checkbox
- Last Part Lot Assgmt checkbox
Thus, where is the section in the operation overview screen at Master Recipe or Routing level that I can assign several inspection points?
Thanks
YY

QM Inspection Points

Gurus
I require that inspection points should be created automatically for inspection lots when i view QA32
To do so i have done settings in SPRO > QM > Quality Planning > Inspection Planning > General > Define identifier.
Here i kept 2 under field Time for field combination 150 assuming system will create inspection points every 2 hours automatically but i cannot see inspection points created
Where am i missing? Please reply
Regards

Dear,
Have have to assigned inspection characteristics in routing that will be your in process inspection
When you Release the order the inspection lots will be generated.
Please maintain the Quality management Inspection point on the operation details and select time related. For Inspection point completion select Quantity, Valuation and Confirmation(Production).
mention the time as 1 and unit a HR (Hour).
You can record the results for every hour.
But if you are not doing inprocess inspection & inspection with GR in that case you have to create insepction plan for material assign inspection type as 04 in material master
Now for hourly analysis this you can enter by selecting scope not fixed & single value in master inspection characteristics
You can enter time & other deatils of sample by using inspection point in inspection plan.
Or else QAPP_CUST_IP_CREATE for generation of automatic inspection points.
Then it will work for you.
Regards,
R.Brahmankar

Problem when created an Inspection Lot.

Hello PP Guru's,
I have a major problem with Inspection Lot.
I have created an Inspection Lot but forgot to create an Inspection Plan for the Material for which the lot has been created.The Inspection Lot is in CRTD status which doesnt allow me to record the results.
I know one method that I can do GR reversal so that the material can be removed from Quality stock(Lot will come to LTCA status) and then can do GR again so to fetch Inspection Characteristics of the material from Inspection Plan which I have created so the new lot created will be in Release status which allow me to process the lot.
I want to know if there is any other method by which I can Include the Inspection Plan for the Lot which is in CTRD status without reversing GR Document.
Thanks for the help in advance.
Points will be rewarded to useful answers.
Rgds,
Rakesh Wade.

Hi
create the inspection plan appropriately.
Then go to QA32.select the ispetion lot .
Press tab Inspection specifications.
Then press the button 'task list/specification'
It will be assigned.
Then refresh the screen.
The it will solve your problem.
Regards
YMREDDY

Creating an inspection point

Similar Messages

Maybe you are looking for