Bapi Service entry sheet create-Issue

Hi MM gurus,
I tried to create a service entry sheet using this bapi.
The entry sheet got created but there was no data that was passed on to the entry sheet.Can anyone please tell me why this happened?

Thanx EDIT,
                      i refered this note and followed the steps given, now  the system is throwing a new error maintain service "Line 0000000010: please specify a service".
These are the fields that i've maintained:
EntrysheetHeader:
PCKG_NO :   0000000001
SHORT_TEXT   :BAPI FOR ENTRY SHEET UPLOAD
PO_NUMBER     :2009200084
PO_ITEM            : 00010
DOC_DATE                09/22/2010
POST_DATE               09/22/2010..
ACCEPTANCE :        X
ENTRYSHEETSERVICES:
For the service package:
PCKG_NO       : 0000000001
LINE_NO         : 0000000001
EXT_LINE         :0000000000
OUTL_LEVEL 0
OUTL_IND:          X
SUBPCKG_NO    :0000000002
For planned service:
PCKG_NO    0000000002
LINE_NO    0000000002
EXT_LINE     0000000010
SUBPCKG_NO     0000000000
SERVICE      5002
QUANTITY   8.00
GR_PRICE    120 ...
PLN_PCKG 0000003065(ESLL-PACKNO)
PLN_LINE 0000000001(ESLL-INTROW)
Do i need to maintain any other fields ?

Similar Messages

  • Cancelation of service entry sheet created in Pervious Fiscal Year.

    Dear Experts,
    I want to revoke the service entry sheet created against the WBS Element.
    The Service Entry sheet is created and accepted in pervious fiscal year.When the Service entry sheet is revoke it is giving the error for Budget Exceeds. We are having the Investment management activated in our company.
    Kindly  suggest the solution for the reversing the Service entry sheet.

    Dear Rahul,
    If you have done the carry forward then you can change the PO delivery date, make it to current / future date and revoke the service entry. Your budget will be checked in this fiscal year (based on PO delivery date).
    Rregards
    Shubham

  • Service entry sheet related issue

    Hello Gurus,
    I have a issue related to service entry sheet. The issue is -
    In service entry sheet the system is picking the whole amount of the service in the first entry, not allowing enter the second entry sheet for the same PO.
    Thanks in advance.

    While creating first Service Entry sheet, you can change the qty of service. Its in editable mode only.
    If you have done first service entry sheet with complete qty, then you can't do next one.

  • Service entry sheet revoking issue

    Hi All,
    I am facing some issue in revoking the service entry sheet. We created SES, accepted and entered invoice. Then i cancelled the invoice and revoked the SES, but now the revoked value in movement  102 is not the SES accepted value.
    For example
    SES accepted(101) - $100,000
    Invoice value - $10,000
    SES Revoked value(102) - $10,000
    It is not revoking the full amount $100,000. How can i revoke the full amount? Also, how can i now adjust the difference $90,000 in 101 and 102.
    Please help
    Thanks
    Bob

    Hi Gordon,
    My problem
    1. Entered the Invoice.
    2. Cancelled the Invoiced
    3. Revoked SES.
    But when i revoke the SES it is revoking only the amount I invoiced. I want to revoke the full the full SES amount.
    Please help
    Thanks
    Bob

  • BAPI service entry sheet

    Hi,
       i am creating service entry sheet for service PO through BAPI_ENTRYSHEET_CREATE.I am getting a pop up with message "Buffer table not up to date".But while creating manually this pop up is not coming.I have checked both set of datas at header level table, it is same.how to rectify this problem.
    regards,
    Manesh.R

    Thanx EDIT,
                          i refered this note and followed the steps given, now  the system is throwing a new error maintain service "Line 0000000010: please specify a service".
    These are the fields that i've maintained:
    EntrysheetHeader:
    PCKG_NO :   0000000001
    SHORT_TEXT   :BAPI FOR ENTRY SHEET UPLOAD
    PO_NUMBER     :2009200084
    PO_ITEM            : 00010
    DOC_DATE                09/22/2010
    POST_DATE               09/22/2010..
    ACCEPTANCE :        X
    ENTRYSHEETSERVICES:
    For the service package:
    PCKG_NO       : 0000000001
    LINE_NO         : 0000000001
    EXT_LINE         :0000000000
    OUTL_LEVEL 0
    OUTL_IND:          X
    SUBPCKG_NO    :0000000002
    For planned service:
    PCKG_NO    0000000002
    LINE_NO    0000000002
    EXT_LINE     0000000010
    SUBPCKG_NO     0000000000
    SERVICE      5002
    QUANTITY   8.00
    GR_PRICE    120 ...
    PLN_PCKG 0000003065(ESLL-PACKNO)
    PLN_LINE 0000000001(ESLL-INTROW)
    Do i need to maintain any other fields ?

  • Service Entry Sheet Create Creation

    HI all,
    While creating & accepting Service entry sheet using ML81N T- Code we are getting the below error massage.
    <u>Account Assignment 01,ErrorM7 Message 022
    "Error message M7022PU quantity exceded by 1AU "
    Higly appreciate your solution at the earliest.
    Thanks in advance.
    KC pani

    Hi,
    Please ensure the field for overdelivery tolerance ( EKPO-UEBTK ) in the item detail is not set to ' unlimited '.
    This field must always be set to 'unlimited ' for purchase orders for external services.
    The reason for this is that services are always managed with the unit of measure 1 SU on item level, that is, if this 'unlimited' flag is not set on item level, only one service entry sheet can be created. For the second, the above message is then displayed as the quantity 1 SU is now exceeded.
    Please check and confirm.
    Regards,
    DilL

  • Service entry sheet return issue

    Hi all,
    anyone knows how to use service entry sheet return indicator? If the SES has been approved, but one line needs to be returned, what should I do to correct it? please advise.

    Srinivas,
    thanks for your answer. Right now our process proposal process is:
    a. AP raise the full credit memo on the service entry sheet.
    b. Revoke acceptance (ME81L) of the service entry sheet
    c. Make the change on the revoked SES, either delete couple of lines or change the gross price, accepted and save.
    is this correct? Is there any way to improve the process ? And when I revoke the SES, it doesn't pop up the movement reason, only pops up the posting date.Is this a config defect?

  • Service entry sheet create for contracts with unplanned services

    Hi,
    I am creating SES using BAPI_ENTRYSHEET_CREATE. I have a scenario in which i need to create SES based on the PO no, PO Item , Quantity, Headertext, Contract No, Contract Item, Contract_Item_Line. While creating manual SES using ML81N we use Contract button to provide contract no, item and service(service with master, without master). When i am creating SES it is creating SES but the service is getting posted as unplanned not contract checkbox. In ML81N screen there are four checkboxes for any service line. 1)Plannes 2) Unplanned 3)Contract 4) Dele. Indicator
    In my case it should flag the contract button but when there is an unplanned service for any contract no, it is flagging the Unplanned checkbox not contract checkbox.
    Please suggest
    Thanks
    Randhir

    you can get the PackNo details of entry sheet from ESSR and of PO from EKPO. from the packno find the subpack no in ESLL. put the subpack no again in ESLL as pack number and you get the services for entry sheet and PO. you may try a logic to link both

  • Service Entry Sheet creation!!!!

    Hi all,
    I am working on service procurement with ECS scenario.The Service Entry Sheet in the backend R/3 system is subject to release strategy(for a material group).
    Whenever I create a Service Entry Sheet(SES) based on a EBP PO, then the SES is subjected to a release strategy.
    Whenever I create a confirmation in the EBP system(which doesn't have a workflow for confirmation), the follow-on document i.e. Service Entry Sheet is getting created in the backend with absolutely no release strategy whatsoever.
    Why is the SES getting created automatically,even though there is a release strategy attached to it at the backend?? This release strategy is functioning fine when I create a SES manually in the backend.
    I found a thread { Service Entry sheet auto released when created through EBP } wherein someone had faced the same issue that I faced, but no one gave him a clear picture as well.
    Help me!!
    Regards
    Hari

    Hi,
    This is standard SRM design.
    The Service Entry Sheet created from SRM in ECC is directly released to create a material document (good receipt).
    This is because, there is no release functionnality available from SRM.
    Thus, if there were a release strategy, there is no way in standard to pilot it from SRM.
    If you need a release straegy, you need to use the confirmation WF in SRM that will occur before the Service Entry sheet is created in ECC.
    Kind regards,
    Yann

  • Automatic acceptance of Service entry Sheet

    Hi,
    We have requirement like whenever the service entry sheet create automatically through CATM it should get service acceptance automatically

    I think this is not possible through std SAP but you can use the user exit SRVESSR
    to accept the service in background once it is generated through CATM.

  • Multiple release of Service Entry sheet in ML85 with a release Strategy

    Hello Techies,
    We have requirement where in we need to each release service entry sheet created in each month.
    We have created a release strategy and now using ML85 for releasing SES instead of ML81N.
    Is there any process so that all the SES are released at once(Mass release) .
    Thanks
    Jayashree

    Hi Dear,
    you select the SES as per your Release code and Code Grp, henceofrth the no of service entry sheets will be  display you can choose the multiple Entry sheets and select the green flag w/o coming to the same T-Code again and again.
    Hope it will help you.
    Regards,
    Yawar Khan

  • Short text of service entry sheet in accounting document

    Hi All
    I want shor text (ESSR - TXZ01) of service entry sheet to get populated in the text field(BSEG - SGTXT) of corresponding accounting document of service entry sheet created against GR document.
    Please suggest how  can I achieve the same.Is there any SAP note for the same?
    Regards
    Satish Kumar
    Edited by: satish kumar on May 28, 2010 3:33 PM

    Hi Satish,
    BSEG - SGTXT gets the values from MSEG-SGTXT (material document after SES acceptance).
                                                                                    The service entry sheet header text is only copied into MSEG-SGTXT if            
    you do NOT use Srv-Based Invoice Verification:  the field EKPO-LEBRE          
    in the PO item is NOT checked.
    Otherwise the text from the service lines will be overtaken into   MSEG-SGTXT.  
    Please make tests.
    Regards,
    Edit

  • HOW TO SET DELETION FLAG TO SERVICE ENTRY SHEET ?

    Dear Experts,
    Can anybody explain how to set deletion flag to Service entry sheet created ?
    Service Entry sheet has been accepted and saved, i want to set deletion flag to the Service Entry sheet.
    Thanks in Advance

    Hi,
    Go to ML85 and give your service entry sheet no in Entry sheet data and select "cancel release" check box and give the corresponding release code and execute and save. The release gets cancelled.
    The other way is go to ML81N and give your Po and service entry sheet and click on the icon "cancel release" (reverse arrow mark) give the corresponding release code for cancellation and save. Now the service entry sheet will go to "No acceptance" mode. again go to the change mode and select the line item and delete it by clicking on delete icon.
    regards,
    Kannaiah Naidu

  • Unable to reverse Service entry sheet posted in earlier prds

    Hi All,
    We are unable to reverse the service Entry sheet created via Shipment cost document. As the Shipment cost document was created in the month ofJanuary 2011. And now that period is closed. But I am looking the way wherein by changing the posting date to current month date. So that system should allow me to reverse the cancellation of service Entry sheet
    by ticking the cancellation tick mark under the Settlement Tab.
    I need inputs for reversing it in current month. in the similar lines. as we reverse the service entry sheet in ML81N and have an option to change the Posting date. But in VI02, Date Cancellation field is greyed out and we are unable to tried it out.
    So basicaly how to change the posting date in shipment cost document, sothat cancellation should happen in date which is being entered by user.
    Thanks
    Nitin

    Hello there,
    I had the same problem yesterday and we were able to do the reverse of the ship cost provision and the repost using posting dates from this month. Here is what we did:
    For reversing using a different date.
    Go to VI02, double click on the position, go to "settlement" tab and select "Cancellation" box, then use the menu bar in the "Item" -"Redet. settlement date option" , you will have an information pop up message "Redet. settlement date not possible - account
    already assigned to item" ,  just hit enter and the "date cancellation" field will be now available to modify. Put the date you desire and save.  If you go to the document flow, you will notice the cancellation is done and the posting document is in the FI period you desire.
    To repost the same shipment cost with the new date (current period).
    Go to VI02, double click on the position, go to "settlement" tab , Hit the button "delete account assigment" and the settlement date field will be available for change. Modify the date, save and leave the transaction.
    Enter again and from the menu go to "Item - account assigment", and you will notice the system already redetermine the account assigment, go back (F3) and the "Transfer" field is not available to select and save.
    Then you have the new service acceptance posted with the current period.
    I spend some time and couldn´t find the answer in other websites, now that i have the answer, I hope this help somebody else,
    Rgds,
    Sara

  • Automatic service entry sheet acceptance

    Hi,
    I need to find a way to automatically accept the service entry sheet created through CATM. Is there an efficient way to accomplish this?

    Dear Kish,
    Its a standard practice to approve the hours of work done by an  external or internal with their immediate superior or higher. SAP has incorporated to fulfill the same as a universal process.
    You have to go for User  Exit via SMOD for SRVESSR or Badi to fulfill your requirement. Schedule as a background process as per your requirement
    R,
    Amala

Maybe you are looking for