Chart drill-down support

Hi, guys
Is chart drill-down supported for the web app in CR 2008/CR XI and how is it activated ?
regards, TST

Hi
I'm using CR XI R2 for the web site
The drill-down feature works fine in the preview mode in CR 2008 but not in the CR viewer. at the web site.
I sort out the way to activate the zoom feature by set autodatabind property to false.
But I´m not able to activate the drill-down feature for the chart at the web site
regards, TST

Similar Messages

Bubble Chart drill down issues

I have a filter and a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings when I chnage the filter
The problem is with drill down
I want to drill down to a Bar chart when I click on bubbles. Each bubble click will drill down data into that bar charchart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
Thanks

Hi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko

Bubble chart drill down

HI All,
We have 4 levels like(Continent,Country,State,Dist). Our business Req is like drill down from entity at one level to another entity at the following level.Each Entity has one to many relation ships with entities in the subsequent levels.
For Ex: One Continent will be linked to many Countries etc..
We are trying to find a solution where a click on particular continent will point to a dataset / Range of values.....
Could any one tell us how to define a range of values....
Thanks In Advance
Nithila

Hi Nithila Siva ,
This is quite same as all other chart drill down.
Here is the explanations:
You have 4 levels drill downs :Continent,Country,State,Dist that means you can have 4 bubble charts in the canvas.In the First chart display all the continents(ex: Asia,Africa etc..) select asia from the first chart it should display all the contries in the ASIA (india ,pakistan etc..) in the second chart and follow the same for rest 2 charts.
How can we do this:
From your raw data you need to filter the data and point it to different charts. you can do this by writing formulas in the excels ex : point the data of all the continents in the first chart and in the properties tab-> enable drill down->select row-> in the source give all the continents and point the destination to one particular cell,so if you select a continent that value will come and sit in the destination cell and then you have to write formulas comparing the destination cell.
Hope this helps.
let me know if you need any explanation on this.
Cheers,
Sudharam

Xcelsius Bubble Chart - Drill Down Issues

Hi ,
Product : Xcelsius SP 3
I have a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings.
The problem is with drill down
I want to drill down to a X-Y chart when I click on bubbles. Each bubble click will drill down data into that X-Y chart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
Please help if someone has encountered this issue. There has to be some solution for this.
Thanks,
Tarun

Hi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko

Issues with multilevel pie chart drill down with push button

I am new to Xcelsius. I am trying to build a multilevel pie chart drill down (one pie chart drilling down to another etc) and I am able to achieve that. Now I want to add a Back Button using Push Button so that I can go up. When I preview, the Push Button goes into two state and I have to double click to go back. Can anyone tell me what I am doing wrong. I am using the latest Xcelsius. [The source code is here|http://www.woofiles.com/dl-195360-3lTyVM8Z-piechartdrilldownwithpushbutton.xlf]
Thankyou.

Hi Murali
This is exactly the same what i tried to do,
Drill down to 4 levels State -> City-> store etc with 4 pie charts and similar push button to close each level to
go back to previous chart, first run from 1 to 4 works fine, then after closing all the levels and when i am at the pie chart 1
if i click any pie slice it will jump to Pie chart 4 straight,
I tried tracking the issue, all i could find is some how the previous dynamic visibility values are back even after erasing
the data with the PUSH button (Destination cell insertion with blank or 0).
did you find a solution for this issue ?
Thanks
Chandra

SharePoint PPS Hide null or blank value in performancePoint chart drill down.

Hi,
I am using SharePoint Performance Point Service. Hide null or blank value in Performance Point chart drill down.
Thanks & Regards
Poomani Sankaran

Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Limits the PerformancePoint Analytic Chart drill down dimensions

Actually my requirement is, how to limits the Performance Point Analytic Chart drill down dimensions.
I am using SQL Server 2008 R2. Is it possible to achieve it in SQL Server 2008 R2 without
Perspective?
I should not change my system from SQL Server 2008 R2 to SQL Server 2012 for
Perspective.
Is there any other way to achieve it.
Thanks in advance.
Thanks & Regards
Poomani Sankaran

Hi Poomani,
In your scenario, you create a Performance Point Analytic Chart, now the requirement is that limit the Performance Point Analytic Chart drill down dimensions, right?
As you know, to limit the drill down dimensions, we can created a perspective in the cube that limited the visible dimensions to those couple of dimensions. In your scenario, you said that you need change my system from SQL Server 2008 R2 to SQL Server 2012
for Perspective, right? We can create a Perspective on SQL Server 2008 R2 version. The links below might help.
http://technet.microsoft.com/en-us/library/ms345316(v=sql.105).aspx
http://www.jamesserra.com/archive/2011/06/performancepoint-wish-list-change-a-datasource/
If I have anything misunderstand, please point it out.
Regards,
Charlie Liao
TechNet Community Support

SharePoint Performancepoint Analytic chart drill down

Hi,
Anybody can tell me?
In SharePoint performance point analytic chart drill down.
The drill down showing all the dimensions from the datasource but instead of that. I would like to show only the required dimensions only. How to configure it?
Is it possible?
Thanks & Regards
Poomani Sankaran

Hi Poomani,
According to your description, my understanding is that you want the drill down to show only the required dimensions.
Here is an article about this issue, please check if it is useful:
http://denglishbi.wordpress.com/2012/03/28/using-perspectives-with-performancepoint-services/
In addition, as this issue is related to SSAS, I suggest you create a new thread on SQL forum, more experts will assist you with this issue.
SQL forum:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

OBIEE 11.1.1.6 Paretto Chart drill down

A Pareto chart when created using OBIEE 11.1.1.6 drills down to the incorrect hierarchial map. This was a bug with OBIEE 10g:
BUG:8769813 - DRILL DOWN IN PARETO GOES TO WRONG CHILD
NOTE:517727.1 - pareto charts
It was originally an issue with the use of Corda charts. This was supposed to be fixed with the move to OBIEE 11g but it does not seem to be so in our case, since we encounter the same error.
Original OBIEE 10g error: https://support.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?_afrLoop=738674755173621&id=1200914.1&_afrWindowMode=0&_adf.ctrl-state=k53hrt132_215
I will look around on the forum, but any insight would help

I will try and explain the sequence of occurances on an Oracle "Sample Sales Lite" analysis, in case it needs to be recreated.
It is a very simple analysis using the “Sample Sales lite” subject area provided by Oracle. The criteria is just company from within offices as the dimension and revenue from within base fact as the fact.
The typical hierarchial drill path for the “Company” dimension within offices as per the RPD definition is Company > Organization > Department > Office.
When viewed as a table this drill path works perfectly fine. When we represent the same as a Paretto chart, on clicking on “Stockplus Inc”, the output drills down to a breakdown of "Genmind Corp" instead. This is the same when viewed as an analysis and on a dashboard.
I have seen similar occurances with bubble charts as well. Do let me know.

Lose chart drill-down for webi based on BEx/BICS

Hi All,
I have a client for whom drill-down through charts based on SAP hierarchies is an essential requirement. My research here (and elsewhere) has led me to the following conclusions:
1. IDT Universe (.unx) can't be based on BEx query (functionality briefly appeared then was revoked with subsequent SP)
2. The supported/recommended method for reporting against BEx query is the BICS connectivity
3. A webi report based on a BICS (although offers nice new sap hierarchy interaction) does not support drill-down through charts
Just looking for confirmation that I am correct...and that my reports will therefore need to be based off traditional universes (.unv), to achieved drill down on charts in webi?
Appreciate any feedback.
Thanks,
Ferdie.

Hey Ferdie
1. Build table in WEBI Document include the Hierarchy object (0COSTCENTER).
2. Choose the CostCenter, right click set as Selection.
3. Now add new Blank Cell and put it near selection , enter there some text , like JUMP TO, DRILL and etc..
4. Now select the CELL . right click , Linking and Hipper Link or Document Link, and choose there another document
or you also can choose self document. When your linking to another webi document you can transfer to it parameters to prompt. So Transfer the costcenter as parameter.
The document link option available only when you run document in View mode (No rich client without JAVA). I will open OSS to SAP about this issue
Also you can choose to open the document in current window, so then user will think that he is still in same document
Example for link parameter:
/portal/1110311905/OpenDocument/opendoc/openDocument.jsp?iDocID=AdJiD59b4kJKkhNpGCYT8Q0&sIDType=CUID&sType=wid&lsSpsCost%20Center%3A=Ness&sWindow=Same
I hope this will work

PIE Chart Drill down in bex report

Hi Friends,
In my bex report i have pie chart for year 2008.
Shall I drill down on this report means if i click on one part of the pie chart will i go to another report or another pie chart.
Can any one pls tell me is it possible .
Thanks & Regards,
Ramnaresh.
Edited by: ramnaresh porana on Dec 1, 2008 6:35 AM

Hi ,
Thanks for reply.
how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
Can you pls guide me.
Thanks & Regards,
Ramnaresh.

Pie-chart drill-down

Hi,
I have created a pie chart on my report. I want it so that the user can double click on a segment of the pie and drill-down to view some detailed logs. The logs just being a list of details from the records like "name" "age" etc.
I have read some stuff on subreports and linking, but im not quite sure wether this is the way to do this or if there is an easierway without all that subreport linking malarchy.
Is there an easier way? and if so, could you please provide me with a step-by-step as im fairly new to this whole crystal reports thingamajig. Thanks
J

Hi James
You can get a drill down on your pie chart once you apply groups in your report and create chart based on those groups.
For example: I create a report to display the last year sales for all the cities in a country. I want a drill down onmy pie chart for the cities. I do the below:
1. I create two groups on Contry and City.
2. Now I create a pie chart. In Data tab of Chart expert select the group for City in On change of, and show value Last year sales.
3.Place the chart on group header of Country group.
4. Refresh the report, now I would get the drill down for the cities for every country in the Pie chart.
For more information please refer to Crystal Reports Help.
Hope this helps!!!
Regards
Sourashree Ghosh

SVG Pie Chart drill down report

I have created a svg pie chart report within a chart region. the chart contains url drill down.
The urls work fine but it opens the result from the url in the same chart region on the same page.
How can I get it to open on either a new page altogether or on another region on the same page.
Regards
iculhane

How do you get the url drill down to work? Can you explain to me? I have a 3d pie chart, what I want is when I click one of the pieces, it will drill down to a report.
Thanks,
Helen

Pie Chart Drill Down Report

Hello All,
Please help. I created a 2D Pie chart. How do I get chart to drill down to a report based on the slice of pie I click. I've already created the report. I can't seem to get the link working.
Artnette

Artnette,
See this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:156
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Stacked Column Chart drill down

I have a stacked column chart. Data is dynamic. Sometimes one column will have 0 as value.
I need to do a drill down on the ones which has value. In order to do a drill down everytime, I don't want my drill down to be tied to a specific serie...
How can I do that?
Thanks,
Wen

Hi Wen:
Let me do a quick demo to you so you can learn how drill down for stacked column chart works
1. Create a new stacked column chart.
2. Choose data binding "By Range" and "Data In Columns" binds to range "A1~C2", which has range data as following:
a, 1, 2
b, 3, 4
3. After finishing step 2, there will be two series created (Series 1, and Series 2)
4. Open drill down tab and check "Enable Drill Down".
5. Choose "Insert Type" as "Row".
6. Click "Series 1".
7. Bind "Source Data" to range "D1~E2" which contains value as following:
11,12
13,14
(these are the drill down value you want to insert)
8. Bind "Destination" to "D3~D4" (empty cells)
9. Create another component "Grid" under "Other" folder.
10. Bind grid data to "D3~D4" to present the drill down data.
11. Preview the xlf file, can click values in series 1, you will see the drill down result. (Grid will be refreshed with new drill down data)
Hope the demo above can help you in your practice, also you can refer to help documents for more information. Let me know if you have any other questions!
Thanks!
Bill

Chart drill-down support

Similar Messages

Maybe you are looking for