Basic Authentication in RWB's Message Monitoring

Hello,
we have XI 3.0 SP11. When I try in the RWB:
Message Monitoring -> IE -> Details -> Message Content
I can't login over the Basic Authentication menu. The user has all XI-roles and the SAP_ALL profile but it doesn't work.
What's wrong?
thanks for help
André

Add role "SAP_J2EE_ADMIN" and try it again.

Similar Messages

Trace level of RWB's Message Monitoring - Detail Message - Tab "Audit log"

Hi,
My flow is: File -> PI -> Transformed File with seeburger module. Everything is good except the trace level in RWB.
Exactly, in our PI production, under RWB -> Message Monitoring, when I select a message (e.g PI -> Outside) and see its Detail, under tab "Audit Log", I have a log with only 2 pages (which corresponds to the sender part "File -> PI")... whereas in our PI pre-production, I have 4 pages for the exact same flow, on which I have also info of the receiver part "PI -> Outside"...
My question is just: do you know which parameter is involved in this trace level of RWB's Message Monitoring Detail log ?
regards.
Mickael
Note: in [Help SAP|http://help.sap.com/saphelp_nw04/helpdata/en/fd/16e140a786702ae10000000a155106/frameset.htm], I see only this sentence "Audit Log: The audit log for the selected message is displayed as the default setting.".
Edited by: Mickael Huchet on Oct 18, 2011 1:59 PM

Hi Shabarish,
Thanks that will help to localize my search.
else by hazard, you don't know which parameter in this tree is for the "Audit Log"?
coz I did a quick look in prod and pre-prod, but it seems the severity is the same (e.g "Info" for most of them) whereas the trace level of "Audit log" is different.
Thanks for
Regards.

Messages in TBD status in RWB IE message monitoring

Hi
I have messages in TBD status in RWB message monoitoring and log version of messages displayed in SXMB_MONI.
I understand that restarting XI_AF_MESSAGING from NWA will flush out the queue , However would like to understand
1. Once flushed out, will the message be out into next level of processing or will it be in cancelled .
2. Is there any alternative apart from restarting the services. The issue mainly occured due to some slowness in PI and I would want these messages to be cancelled and should not be transferred to the receiver application .
Your advise is much appreciated
Thanks
Anusha

hi anusha,
please check whether Queue name is registered or not in SMQR. and moreover these will block further messages.
just check this note :
SAP Note 1623356
Regards,
Loordh.

In bound basic authentication

I had no luck in something as simple as configuring basic authentication for inbound bpel messages. I have tried everything as per documentation, going through web.xml, orion-application.xml etc for the bpel web app startup. I am using an existing user in system-jazn-data.xml
Inbound requests are always allowed and never challenged. I was evaluating oracle bpel for possible use in our enterprise product. Based on my painful experience, I am likely not to reccommend it.
Pranab

In ...\OracleAS_1\j2ee\home\applications\orabpel\startup\WEB-INF\web.xml
<security-constraint>
<web-resource-collection>
<web-resource-name>New Part Process</web-resource-name>
<description>These pages are only accessible by authenticated users.</description>
<url-pattern>/orabpel/default/NewPart/*</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>AgileAnalyst</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>jazn.com</realm-name>
</login-config>
<security-role>
<description>BPEL PM User</description>
<role-name>AgileAnalyst</role-name>
</security-role>
In ..\OracleAS_1\j2ee\home\application-deployments\orabpel\startup\orion-application.xml
<security-role-mapping name="AgileAnalyst">
<group name="BPMAnalyst" />
</security-role-mapping>
Tried making this changes in orabpel.ear also and repackaging the ear
BPMAnalyst is already defined in system-jazn-data.xml
There is no error message. When I invoke the bpel process form a java axis client , it does not challenge the client for authentication. The whole process executes succesfully, as if basic authentication has not been configured
Need help badly!! Has spent enough time on this already
Pranab

[RWB] New Selection in Message Monitoring

Hello,
in a system of a client I saw a selection "Database (Overview)" in Message Monitoring
of RWB. This view displays all successfully or failed messages of all services and interfaces.
How can I implement this function? Our company got a higher patch level so I don't
think that this function depends on a newer version.
Does anyone know how to configure this?
thx
chris

Steve,
If there is an error in the authentication configuration of some specific destinations on the J2EE then that may probably why the normal authentication fails and the system then tries to logon with the default user 'J2EE_GUEST' but fails as well ( which is ok ). See note 928862
Also Make sure that USer has this Role- SAP_XI_MONITORING
This SAP Note may help you-768456
Hope this helps......
---Satish

Java.lang.NullPointerException in Message Monitoring-RWB

Hi Experts,
I am getting java.lang.NullPointerException in Message monitoring.Here is the detail trace of the error message.
Stack trace for the above error message is:
java.lang.NullPointerException
     at com.sap.aii.mdt.util.SelectModel.getComponentLabel(SelectModel.java:192)
     at jsp_monitor_new1226507446052._jspService(jsp_monitor_new1226507446052.java:174)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:427)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:358)
     at com.sap.aii.rwb.web.messagemonitoring.viewcontroller.MmDynPage.doProcessBeforeOutput(MmDynPage.java:69)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:123)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at jsp_FC_Secure1226507436137._jspService(jsp_FC_Secure1226507436137.java:24)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Wait...
Query being processed
Please help me how to resolve the issue.
Thanks,
Bharath.

Hi Bharath,
Check SAP note no.1250954 for solution. It has the solution to the problem you are facing might be ralated to the SP levels you have, you need to installl some patch from this note.
Thanks!

Jdbc adapter error on confirmation message in message monitor (rwb)

I have the scenario iDoc -> PI 7 - > jdbc (AS400 odbc driver).
When I do INSERT statements, the data is stored in the Database and the RWB message monitoring shows status Successfull.
However, for every insert, an other message shows up in the message monitoring with reversed Sender and Receiver (so it looks like a confirmation message is trying to find its way back to XI). This message first is is Status "Waiting", and after some time gets in Status "System Error".
As I am not expecting any responses in my XI configuration (as I have no place to send them to), I want to stop these messages showing up in the Adapter Engine (as there will be many Error Status messages that are of no interest to me).
How can I stop these messages, or what should I do in XI to process them (and dump them in my receiver determination). I have NO BPM involved .

Hi,
For each open connection a entry is made j2ee stack.So when the it reaches to max and execption is thrown.
In Jdbc adapter configuration -> advance mode -> Set -> Disconnect from the database after processing each message.
Should solve the prob
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>

Messages remain in Scheduled status in message monitoring in RWB

Hi PI experts,
I have got a situation where there are several messages showing in the Scheduled status. I followed the path RWB > Message Monitoring > Adapter Engine > Database (Overview) > Display.
QoS for these messages is EOIO, however there are no messages stuck in the queue. All other channels are running smoothly. Only with this particular channel the messages remain in Scheduled status for a long time.
I am neither able to make out the roor cause nor reprocess/resend these messages. Pleaes help.
Regards,
Dhawal

Hi Suraj,
What you said is absolutely correct. However, as I mentioned, the error message was not visible in RWB.
My problem just got resolved. What I did is this,
I followed the link http://<server>:<port>/MessagingSystem/monitor/monitor.jsp which is SAP Message Display Tool.
Here in EOIO Sequence Monitor I found the error message and it's predecessor. When I resent the erroneous message from here, all subsequent Holding messages got processed.
Thank you everyone for your help. Have a gr8 day...
Best Regards,
Dhawal

Java.lang.OutOfMemoryError during message monitoring in RWB

Java Engine Problem during message monitoring in runtime workbench!!
Posted: Nov 12, 2007 2:13 AM Edit E-mail this message Reply
Hi,
Our integrating processes are processing successfully.
But there is a problem during message monitoring.
When I use message monitoring in RWB,
Integration Engine monitoring has no problem.
But there is a problem during displaying adapter engine monitoring.
The message is "java.lang.OutOfMemoryError: Java heap space".
So I cannot see any adapter engine message.
Actually same error occurred 3 weeks ago.
At that time, we solved the problem with restarting java service.
Does anyone know about this appearance?
And is there any other solution about this problem??
Thank you.

Hi,
As per the error analysis, it seems that the java heap space is low. So need to increase the heap size.
1. Go to the C:\SAP\JP1\JC00\j2ee\configtool folder
2. Start configtool.bat
3. Go to cluster-data -> template - template_javaee -> instance - IDxxxxx
4. Go to the VM Parameters tab and edit the maxHeapSize property
5. Save and restart the system.
I hope this will solve the problem.
Regards,
Sarvesh
***Reward points, if it helped you.

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
André

Hi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André

No authorization to view payload in auditLog Of Message Monitoring in RWB

Hello,
I am not able to view the message payload in the audit Log In Message Monitoring in RWB.
It says no authorization.
Can anybody tell me what authorization object is required for this?
Thanks,
Loveena

Hello,
Check the link below:
community/pi-and-soa-middleware/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
The configuration consist to set a parameter on NWA. Check the following step:
1. Go to <host>:<port>/nwa;
2. Go to Configuration Management and then Infrastructure;
3. Java System Properties;
4. Click on services tab and then search for XPI Service: Messaging System;
5. Search for messaging.syncMessageRemover.removeBody on parameters tab and modify from true to false. False value should be displayed in the custom value column.
After that, you'll be able to see the payload in RWB.
Regards,
Arthur Silva

Data Persistency in Message Monitoring of RWB

Hi All,
I am dealing with Sync. Interfaces and need to monitor the messages from Message Monitoring.
I have 2 Problems in the monitoring : -
1.     I can only see the messages for last 2 hrs in Message Monitoring.
        Messages Older then 2 hours are not getting displayed.
2.     Also if i am unable to see complete set messages in the 2 hr interval.I mean randomly
         messages are getting lost in message monitoring.
Is there any setting we need to maintain for Message Monitoring?
Helpful Answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hi
have a look at this SAP Note 1031773 - Activating the message overview in RWB message monitoring
message struck in adapter eng.(RWB message monitoring)
http://help.sap.com/saphelp_nw70/helpdata/EN/45/0ea84637643c0ae10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/be/38f0d8cbfe11d2a5f80060087832f8/frameset.htm
Thanks
Edited by: Abhishek Agrahari on Jan 8, 2009 8:14 AM

Unable to find OLD messages in RWB Adapter level message monitoring

Hi Experts,
I have peculiar issue regarding the messages at the adapter level.
I see some messages in SXMB_MONI. I take the message ID from MONI and go to the Adapter Level Message Monitoring in RWB, but i do not see any message for that message id.
This is not happening for recent messages, but some old messages (2 months or so), we are unable to find the message at the adapter level.
I also tried chosingthe option, display from archive, but no use.
Can someone help me out??
Thanks and REgards,
Ravi

>
Amit Gupta wrote:
> directly executing a query in your db.
>
> Thanks
> Amit
How do we do this?
How do we access the backend database?
Are the tools(SQL Client or Toad) freely available?
Regards,
Ravi

RWB-Message Monitoring and End-to-End Monitoring

hi
Can someone explain the differences between Message Monitoring & End-to-End Monitoring through RWB. I see both of them displaying the messages status with better descriptive with End-to-End Monitoring.

HI Chandra
You use message monitoring in the following cases:
1 To track the status of messages
2 To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
1 If you want to monitor message processing steps in a number of SAP components (to be configured).
2 If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated.
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

Basic Authentication in RWB's Message Monitoring

Similar Messages

Maybe you are looking for